Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 597

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_381
id	sigradi2013_381
authors	Baltazar, Ana Paula; José dos Santos Cabral Filho; Mateus de Souza van Stralen; Guilherme Ferreira de Arruda; Estevam Quintino Gomes Junior; Laís Rodrigues Pizano; Fabiano Nardy de Moraes;
year	2013
title	Interface de Eletrônica e Objeto Interativo como Introdução ao Knowledge Based Design [Eletronic Interface and Interactive Object as Knowledge Based Design Introduction]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 608 - 612
summary	This paper discusses the evolution of an interface used to introduce eletronics in the foundation design course at the School of Architecture at Universidade Federal de Minas Gerais, Brazil. The use of this interface by the students triggers the discussion of the possibilities of new technologies in architecture and initiates a tactical learning process in which the students are responsible for the very content they are learning. This interface introduces the discussion of interactivity and indeterminism, crucial to the development of the two main works of the course: an individual interactive object and an urban interactive intervention in group.
keywords	Eletronics; Interface; Interactive object; Learning process; Mathetics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia13_087
id	acadia13_087
authors	Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J.; Haberl, Jeff S.; Yan, Wei
year	2013
title	Visualization of Building Energy Performance in Building Information Models
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 87-92
doi	https://doi.org/10.52842/conf.acadia.2013.087
summary	This paper presents the results of research and development of Building Energy Simulation (BES) visualization methods. In this effort the authors used Building Information Modeling (BIM) Authoring Tools’ Application Programming Interface (API) to visualize BES results in BIM. We also used an external database to store and manage the object-based simulation results from a BES tool. Based on these methods, we created a prototype: Building Energy Performance Visualization (BEPV), which translates information from the result database to the Energy Performance Indicator (EPI) parameter in BIM. Using the prototype, when BIM models are created for building design, the building energy performance can be expressed visually as color-coding on the BIM, allowing users to see energy flows directly. The developed prototype lets architects use BIM as a common user interface for building design and performance visualization, and may improve their designs in early stages.
keywords	building information model, information visualization, interdisciplinary design, performance based design, simulation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	ecaade2013_072
id	ecaade2013_072
authors	Kos, Jose Ripper; Angeloni, Guilherme and Brito, Thiago Mello
year	2013
title	Connecting Dwellers to Building Performance and Weather Data through Sustainable Automation Systems
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 157-165
doi	https://doi.org/10.52842/conf.ecaade.2013.1.157
wos	WOS:000340635300015
summary	The paper presents a prototype for a Home Automation and Information Systems (HAIS) applied to an existing dwelling, the Florianopolis House, with the potential to address building performance and user behavior towards a more sustainable way of living. Home information and automation systems based on a great variety of sensors, associated with local weather stations and climate forecast databases can significantly impact the construction of more sustainable habits in home dwellers. Monitoring the weather variations, building’s performance and the impact each resident’s activity in energy and water consumption is a powerful tool for the dwellers’ awareness and can provide a significant impact on residents’ reconnection with the natural cycles. The development of the graphic interface is highlighted as a critical issue for the communication of building performance, weather data and actuators control.
keywords	Home automation system; user behavior; weather data; graphic interface; building performance.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_230
id	ecaade2013_230
authors	Parascho, Stefana; Baur, Marco; Knippers, Jan and Menges, Achim
year	2013
title	Design Tools for Integrative Planning
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 237-246
doi	https://doi.org/10.52842/conf.ecaade.2013.2.237
wos	WOS:000340643600023
summary	The performance of an architectural object is highly difficult to both define and measure in its complexity since it is integrating a constantly increasing amount of information, from concrete measurable characteristics to the subjective perception of individual users. The question arising though is how to predict the performance of a building and influence the design in order to increase it according to a significantly high number of criteria.The presented paper proposes two design tools, both developed and programmed in rhino python for the generation of freeform geometries. The tools are generated for specific tasks, but may be interpreted as exemplary for a way of defining and structuring a design program in order to increase its efficiency. Both tools rely on a computational core that is generally defined and may be fed with as many and different constraints and criteria as considered suitable for the defined task.
keywords	Integrative design; evolutionary algorithm; agent-based system.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2013_248
id	sigradi2013_248
authors	Soto, Carolina; Moa Carlsson
year	2013
title	Object Interaction Query: A Context Awareness Tool for Evaluating BIM Components’ Interactions
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 269 - 273
summary	During the creative process, designers constantly evaluate the relations between objects in space. BIM aids this process by providing a modeling platform where objects are embedded with information, which can be extracted on demand. The object Interaction Query (oIQ) proposes a novel way to query BIM models, not only for geometric properties and dimensions, but also about the relations among the components. By including the queried objects’ context and interrelations as part of the computation, the prototype tool is able to provide feedback on complex interactions and conflicts in the design environment. The oIQ approach and its implementation are developed as integral parts of the design process, allowing users to perform customized queries through a GUI in which users can apply their knowledge and design preferences to the model’s evaluation.
keywords	BIM; Object interaction; Context awareness; Rule-based system
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2013_086
id	ecaade2013_086
authors	Wurzer, Gabriel; Martens, Bob and Bühler, Katja
year	2013
title	3D Regular Expressions - Searching Shapes IN Meshes
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 279-288
doi	https://doi.org/10.52842/conf.ecaade.2013.2.279
wos	WOS:000340643600028
summary	We have grown accustomed to performing elaborate queries on textual data, e.g. via online search engines, file system managers and word processors. In the past decade, retrieval methods that also work on non-textual data have become mainstream (e.g. face recognition software). Sadly, these developments have so far not caught on for data mining within geometrical data, e.g. 3D meshes generated in the course of architectural work. Specifically during data exchange, such a search functionality would be handy, as it often happens that geometry is exported but object identity is lost - think, for example, of generative geometry or exported BIM data. In this paper, we present an example of such a search functionality, based on angular search. Our method is inspired by regular expressions, a string matching technique commonly employed for matching substrings.
keywords	Shape retrieval; angular search; sub-mesh; regular expressions.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia13_191
id	acadia13_191
authors	Maleki, Maryam M.; Woodbury, Robert F.
year	2013
title	Programming In The Model — A New Scripting Interface for Parametric CAD Systems
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 191-198
doi	https://doi.org/10.52842/conf.acadia.2013.191
summary	Programming, often called scripting, has become a key feature in most CAD systems and an equally key area of expertise in CAD. However, programming surrenders many of the benefits of direct manipulation and introduces notational elements that are cognitively distant from the designs being created. In addition, it creates barriers to use and is often perceived as being too difficult to apply. We introduce Programming In the Model (PIM) through a prototype, implementing live side-by-side views, multi-view brushing and highlighting, live scripting, auto- translating from modeling operations to script and localized relational information within model windows. A qualitative user study confirms PIM’s features and raises issues for future development. A key result is the need for multi-directional extreme liveness , that is, maintaining consistency of action across views at the smallest possible scale. We argue that PIM principles are applicable in textual and visual programming alike.
keywords	tools and interfaces, end-user programming, parametric design, scripting, human computer interaction, live programming
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:59

_id	acadia13_043
id	acadia13_043
authors	Michalatos, Panagiotis; Payne, Andrew O.
year	2013
title	Working with Multi-scale Material Distributions
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 43-50
doi	https://doi.org/10.52842/conf.acadia.2013.043
summary	At present, computer aided design (CAD) software has proven ill equipped to manage the spatial variations in material properties. Most digital design packages employ a surface modeling paradigm where a solid object is that which is enclosed by a set of boundaries (known as boundary representations or “B-rep” for short). In surface models, material representations are often treated as homogenous and discrete. Yet, natural materials are capable of structures where the variability of material within a volume is defined at a multiplicity of scales and according to various functional criteria. With the advent of new 3D printing techniques, a new possibility emerges—allowing new multi-material composite objects to be fabricated in a single build volume with a high degree of dimensional accuracy and repeatability. However, a big limitation facing complex high resolution digital fabrication comes from the software’s inability to represent or handle material variability. This paper proposes a new digital interface for working with multi-material distributions at a variety of scales using a rasterization process. Beyond the immediate benefit of precise graduated control over the material distribution within a 3D printed volume, our interface opens new creative opportunities by enabling the use of existing image processing techniques (such as filtering, mapping, etc.) which can be applied to three-dimensional voxel fields. Examples are provided which explore the potential of multi-scale material distributions.
keywords	next generation technology, multi-material 3D printing, digital interfaces, voxel fields, rasterization
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	acadia13_281
id	acadia13_281
authors	Ahlquist, Sean; Menges, Achim
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 281-292
doi	https://doi.org/10.52842/conf.acadia.2013.281
summary	Material behavior can be defined as the confluence of associative rules, contextual pressures and constraints of materialization. In more general terms, it can be parameterized as topologies, forces and materiality. Forming behavior means resolving the intricate matrix of deterministic and indeterministic factors that comprise and interrelate each subset of these material- nherent conditions. This requires a concise design framework which accumulates the confluent behavior through successive and cyclical exchange of multiple design modes, rather than through a single design environment or set of prescribed procedures. This paper unfolds a sequencing of individual methods as part of a larger design framework, described through the development of a series of complex hybrid- structure material morphologies. The “hybrid” nature reflects the integration of multiple force-active structural concepts within a single continuous material system, devising both self-organized yet highly articulated spatial conditions. This leads primarily to the development of what is termed a “textile hybrid” system: an equilibrium state of tensile surfaces and bending-active meshes. The research described in this paper looks to expose the structure of the textile as an indeterministic design parameter, where its architecture can be manipulated as means for exploring and differentiating behavior. This is done through experimentation with weft-knitting technologies, in which the variability of individual knit logics is instrumentalized for simultaneously articulating and structuring form. Such relationships are shown through an installation constructed at the ggggallery in Copenhagen, Denmark.
keywords	Material Behavior, Spring-based Simulation, CNC Knitting, Form- and Bending-Active, Textile Hybrid Structures.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_212
id	sigradi2013_212
authors	Angulo, Antonieta; Guillermo Vásquez de Velasco
year	2013
title	Immersive Simulation of Architectural Spatial Experiences
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 495 - 499
summary	The paper describes our research efforts seeking to assess the potential use of immersive simulation through virtual reality (VR) environments as a tool for aiding the design of architectural spatial experiences. By making use of a fully implemented HMD-based VR Environment in our school at Ball State University we conducted a controlled experiment with novice design students. After the evaluation of results of the experiment we have found evidence of the positive impact of the use of the system in design education. We will further investigate on the best practices to incorporate its pervasive use based on high-impact simplified methods.
keywords	Spatial experience; Immersive simulation; Head mounted display; Virtual reality; Design education
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201311303
id	ijac201311303
authors	Beorkrem, Chris; Mitchell McGregor, Igor Polyakov, Nicole Desimini
year	2013
title	Sphere Mapping: a method for responsive surface rationalization
source	International Journal of Architectural Computing vol. 11 - no. 3, 319-330
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a parametric surface. The research attempts to propose a method for attaching fixed sized objects to a free flowing surface or "blanket." The model can be used to interrogate a series of shapes and forms with the same componentry. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe and his students developed a series of studies in material and surface properties. By utilizing a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Rhino Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe's original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
series	journal
last changed	2019/05/24 09:55

_id	acadia13_293
id	acadia13_293
authors	Bessai, Tom
year	2013
title	Bending-Active Bundled Structures: Preliminary Research and Taxonomy Towards an Ultra-Light Weight Architecture of Differentiated Components
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 293-300
doi	https://doi.org/10.52842/conf.acadia.2013.293
summary	This paper documents preliminary research into a bending-active architecture that leverages the “bundling” of linear force-active elements in order to create spatial diversity and differentiation.The primary design components of the system are light-weight GFRP rods and tubes that perform well in elastic bending. Material testing and iterative physical model studies are documented, and provide a framework to guide the further development of emerging spring-based computation methods. Challenges to the system include the analysis and resolution of rod-to-rod bundled connections, as well as the development of predictable bifurcation and crossing unions. The paperidentifies key precedents to the work followed by a brief summary of the material selection and testing framework. A speculative taxonomy of bundled bending-active “types” is proposed and supported by examples and prototypes.
keywords	Bundling, Bending-Active, Force-Active Architecture, Material Systems, Spring-based Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	ijac201310103
id	ijac201310103
authors	Bollmann, Dietrich and Alvaro Bonfiglio
year	2013
title	Design Constraint Systems - A Generative Approach to Architecture
source	International Journal of Architectural Computing vol. 11 - no. 1, 37-63
summary	Generative Architectural Design permits the automatic (or semiautomatic) generation of architectural objects for a wide range of applications, from archaeological research and reconstruction to digital sketching. In this paper the authors introduce design constraint systems (DCS), their approach to the generation of architectural design with the help of a simple example: The development of the necessary formalisms to generate a family of architectural designs, i.e. simple houses and pagodas. After explaining the formal system the authors introduce an approach for the generation of complex form based on the application of transformations and distortions.Architecture is bound by the constraints of physical reality: Gravitation and the properties of the used materials define the limits in which architectural design is possible. With the recent development of new materials and construction methods however, the ways in which form and physics go together get more complicated. As a result, the shapes of architecture gain more liberty, and more and more complex shapes and structures become possible.While these advances allow for new ways of architectural expression, they also make the design process much more challenging. For this reason new tools are necessary for making this complexity manageable for the architect and enable her to play and experiment with the new possibilities of complex shapes and structures. Design constraint systems can be used as tool for experimentation with complex form. Therefore, the authors dedicate the final part of this paper to a concise delineation of an approach for the generation of complex and irregular shapes and structures. While the examples used are simple, they give an idea of the generality of design constraint systems: By using a two-component approach to the generation of designs (the first component describes the abstract structure of the modelled objects while the second component interprets the structure and generates the actual geometric forms) and allowing the user to adjust both components freely, it can be adapted to all kind of different architectural styles, from historical to contemporary architecture.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_345
id	sigradi2013_345
authors	Calixto, Victor; Charles C. Vincent
year	2013
title	Arquitetura Algorítmica: Processos e Ferramentas [ Algorithmic Architecture: Processes and Tools]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 362 - 365
summary	This paper presents the results of an academic research in the field of parametric-generative design and through projective tests and processes using parametric tools and computational logic. Thus, five experiments for the region of the Terminal Bandeira Flag Square were set forth. From the urban guidelines and an object in common, it was a distinct possibility, where it was possible to analyze the advances and setbacks in the process of project development. The approach taken is an exploration of design processes that involve computational logic for formulating, exploring and creating architectural themes and its interfaces with other fields of knowledge: algorithmic architecture.
keywords	Performance-based design; Parametric modeling; Simulation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_007
id	ecaade2013_007
authors	Canavezzi de Abreu, Sandro
year	2013
title	Permeability Regimes between Man and Interactive Spaces
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 449-457
doi	https://doi.org/10.52842/conf.ecaade.2013.1.449
wos	WOS:000340635300047
summary	In this paper we will present the permeability regimes: concepts conceived to contribute with the understanding of the new roles and necessary skills for the architect and designer to design performative and interactive spaces. This contribution, as will be shown here, is based on theoretical and empirical bases that will address a specific context: the methods for introducing and making tangible the relation between information, human and space for architecture students. Therefore, we will describe the dynamics of an interactive installation developed by undergraduate students, relating it to the permeability regimes.
keywords	Digitalization; interface; mapping; hibridization; permeability.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_205
id	sigradi2013_205
authors	Chiarella, Mauro; Luis Felipe González Böhme; Cristian Calvo Barentin
year	2013
title	Robots: Automatización en Diseño y Construcción para la Enseñanza de Arquitectura [Robots: Automation in Design and Manufacturing for Teaching Architecture]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 439 - 443
summary	Industrial robots controlled by parametric design software and visual programming environments are gaining popularity in the research and use of non-conventional construction processes in architecture. Process automation which can be personalized through variable components promises to become an industry standard with similar cost structures to current pre-fabrication industrial processes. In order to incorporate competencies from non-serial variable architectural modular design, an initial teaching initiative (Advanced Architectural Design Studio – USM) was developed in Latin América. The strategy employed is based on incorporating concepts and instruments of Construction & Design Automation for CAD/CAM processes with a Six Axis Robotic Arm (KUKA KR125/2).
keywords	Robotic fabrication; Parametric modeling, Teaching architecture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2013_061
id	ecaade2013_061
authors	Ciftcioglu, Ozer and Bittermann, Michael S.
year	2013
title	Fusion of Perceptions in Architectural Design
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 335-344
doi	https://doi.org/10.52842/conf.ecaade.2013.2.335
wos	WOS:000340643600034
summary	A method for fusion of perceptions is presented. It is based on probabilistic treatment of perception, where perception quantifies the chance an unbiased observer sees an environmental object, and the associated probability can be interpreted as degree of awareness for the object. The approach uniquely accounts for the fact that final realization or remembrance of a scene in the brain may be absent or elusive, so that it is subject to probabilistic considerations. For objects that are to be perceived from multiple viewpoints, such as a sculpture in a museum, or a building in its urban context, the probabilistic approach uniquely defines the fusion of perceptions. This is accomplished by carrying out the probabilistic union of events. The computation is presented together with its geometric implications, which become rather intricate for multiple observers, whereas the computation is straight forward. The method is exemplified for two applications in architectural design at different scales, namely interior and urban design, indicating the generic nature as well as the large application potential of the method.
keywords	Perception; vision modeling; architectural design; evolutionary search.
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: