Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 85

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_052
id	caadria2013_052
authors	Segard, Achille; Jules Moloney and Tane Moleta
year	2013
title	Open Communitition – Competitive Design in a Collaborative Virtual Environment
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 231-240
doi	https://doi.org/10.52842/conf.caadria.2013.231
wos	WOS:000351496100023
summary	The recent enthusiasm in popular culture for massively multiplayer online environments has proven that eclectic online communities have the potential to develop powerful problem solving capacities, through the enactment of a collective intelligence. Foreseeing a radical change in the identity of the architect, becoming but the designer of open systems of emergent communal design environments, this paper aims at making the case for an alternate CAAD model. Rather than a fully collaborative approach, the open system proposed here encourages direct competition within a shared online environment, based on an established precedent in an associated design field known as ‘communitition’. After establishing this alternate position for collaborative CAAD, outcomes from a pilot study are discussed and the specification of a full case study is presented.
keywords	Collaborative design, Virtual environments, Competition
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_243
id	sigradi2013_243
authors	Andia, Alfredo
year	2013
title	Automated Architecture: Why CAD, Parametrics and Fabrication are Really old News
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 83 - 87
summary	Automation is transforming a significant number of industries today. This paper discusses how the Design and Construction industry is also entering into a new era of automation. In the paper I observe that designers are automating by using parametric tools (BIM, scripting, etc.) while contractors are moving into pre-fabrication and modularization. Both conceptualizations are incomplete. The paper presents how we are in the first steps of creating learning algorithms that develop specific intelligence in design synthesis and how the design field will became even more sophisticated as a second generation of multi-material 3D printing techniques produce new materials.
keywords	Automation; Architectural design; Artificial intelligence; Learning algorithms; Multi-material printers
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2013_173
id	sigradi2013_173
authors	Braga, Morgana; Henrique Ewerton Pires; Washington Gutemberg Lüke; Antonio Carlos de Oliveira Miranda
year	2013
title	Virtualização da Construção em Fase Orçamentária [Construction Virtualization in Budget Phase]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 288 - 292
summary	Esse trabalho apresenta a comparação dos orçamentos de um projeto modelado no software REVIT, com o emprego do BIM. No caso de obras públicas, o processo do anteprojeto até sua efetiva construção pode ser um processo demorado devido aos vários procedimentos burocráticos. Devido a esse longo processo que usualmente ocorre nesse tipo de obra, optou-se nesse trabalho por acompanhar uma edificação na fase de construção. A obra objeto de estudo é um laboratório para alunos de graduação em engenharia da Universidade de Brasília, Brasília, Distrito Federal, Brasil. Esse laboratório é um prédio de dois andares com 2400 m2 no total. O objetivo principal de estimar os custos de construção de uma obra já em andamento com uso das ferramentas BIM.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_184
id	sigradi2013_184
authors	de Sousa Checcucci, Érica; Ana Paula Carvalho Pereira; Arivaldo Leão de Amorim
year	2013
title	Modelagem da Informação da Construção (BIM) no Ensino de Arquitetura [Building Information Modeling (BIM) on Architecture Teaching]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 307 - 311
summary	This paper discusses the experience of the initial phase of introduction of the BIM paradigm in the undergraduate program in Architecture and Urbanism (evening course) of FAUFBA. We started from the premise that BIM should be adopted gradually and integrated with the various subjects of the course, and should be initiated through the disciplines of graphic representation. The proposal for this course is presented and practices are discussed, as they were experienced in the discipline of Computing and Design II, which deals with this paradigm. It was observed that BIM process requires significant changes, as it encountered some initial resistance from the students. However, this approach increases the understanding of building and facilitates the project documentation. Furthermore, the understanding of the scope of the paradigm was crucial to the effective use of the adopted tool.
keywords	Architectural education; Building Information Modeling (BIM); TIC; Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_138
id	sigradi2013_138
authors	Dezen-Kempter, Eloisa
year	2013
title	Diálogos Digitais: Integração entre Dados Documentais em Sistemas de Informação Baseados no Modelo para Conservação do Patrimônio Arquitetônico [Digital Dialogues: Integration of Documentary Data in Model-Based Information Systems for the conservation of the architectural heritage]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 293 - 296
summary	The architectural documentation plays a key role in the preservation of built heritage, as both support decision making in intervention projects, restoration and rehabilitation, such as the actions of preventive conservation. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. The aim of this research is to develop the integration of quantitative data (smart objects, performance data) and qualitative (photographs and historical documents) in model-based information, such as BIM, to be used in surveying, planning and control of interventions in historic buildings.
keywords	BIM; Architectural Conservation databases; Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
wos	WOS:000340643600049
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_213
id	ecaade2013_213
authors	Ebertshäuser, Sebastian and von Both, Petra
year	2013
title	ifcModelCheck
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 525-534
doi	https://doi.org/10.52842/conf.ecaade.2013.2.525
wos	WOS:000340643600053
summary	On behalf of the BBR (German Federal Office for Building and Regional Planning) the development of an Industry Foundation Classes (IFC) based inspection tool was accomplished as application on an underlying work-in-progress development framework. By providing a machine-based checking process the tool ModelCheck was rolled out to meet demands emerged during pilot projecting. Thus it is capable of processing automated compliance checks on quality criteria for the authorities, e.g. documentation guidelines of BBR regarding building and real estate documentation or building information modeling (BIM) quality criteria formed for the Humboldt-Forum project – a BIM pilot-project managed by BBR. ModelCheck supports checks on IFC models - formal against schemes and logical inspection with regards to alpha-numeric content by using xml-based configurable rules.
keywords	BIM; quality assurance; rule-based model checking; collaboration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_056
id	ecaade2013_056
authors	Fioravanti, Antonio; Avincola, Eolo and Novembri, Gabriele
year	2013
title	Even ‘Clouds’ Can Burn
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 29-37
doi	https://doi.org/10.52842/conf.ecaade.2013.2.029
wos	WOS:000340643600002
summary	Architecture, nowadays, is an even more demanding activity in which complexity is the keyword: complex forms, complex functions and complex structures require sophisticated facilities and components, for example, ‘The Cloud’ of D. and M. Fuksas in Rome. These complexities can give rise to numerous risks, among which fire is frequently a central problem. The fire safety norms do not involve an approach integrated with other instruments or building model (BIM), but provide a list of information and constraints. These codes are now shifting away from a prescriptive-based towards a performance-based method due to recent progress in fire safety engineering. Following this approach, a case study simulation of a multi-purpose centre was carried out in Tivoli, near Rome. This simulation allowed greater freedom in architectural composition, a lower risk to people, a larger number of material and building components used and higher safety standards to be achieved. The model is based on the FDS (Fire Dynamics Simulator) language, a simulation code for low-speed flows, focused on smoke, particle and heat transport by fire.
keywords	Architectural design; computational fluid-dynamics; fire propagation; fire safety; smoke propagation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013r_008
id	ecaade2013r_008
authors	Gargaro, Silvia; Fioravanti, Stefano
year	2013
title	Traditions based on context. How context ontologies can help archaeological sites.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 105-114
summary	Nowadays ICT tools are part of the cultural tradition of designers and over time have replaced pencil and paper in design development. The application programs for design are many and for different purposes, but the role and importance of Context often are underestimated. For new tradition, it needs “Context Knowledge Model” based on ontologies for the management of buildings and preservation and enhancement of cultural heritage with technological innovation. Context modeling gives the opportunity to address the management of pre-existing building in a conscious way. The interoperability of data and knowledge of Context is important to analyze the quality of building process. This is based on standard concepts of the project for the recovery and restoration of the buildings starting from knowledge of context. The goal of this research is to exploit information technology to advance and define knowledge of context monitoring, management and maintenance of historic buildings. The representation of context is important to understand physical, social, economic and normative Context in which the building was placed. The process used to analyze Context entities were Ontologies. This theoretical model will be applied to underground archaeological Roman sites, to implement semantic levels in IFC and BIM for building design.
keywords	Archaeological sites, Collaborative design, Context, Ontology, Design Process
email
last changed	2013/10/07 19:08

_id	sigradi2013_10
id	sigradi2013_10
authors	Gomez, Paula; Matthew Swarts; Pedro Soza; Jonathan Shaw; James MacDaniel; David Moore
year	2013
title	Campus Landscape Information Modeling: Intermediate Scale Model that Embeds Information and Multidisciplinary Knowledge for Landscape Planning
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 61 - 65
summary	Building Information Modeling (BIM) and Geographic Information Systems (GIS), as their names imply, are models of information at different scales that usually appear segregated. Our proposal is to integrate both scales of information in a Campus Information Model (CIM). This paper focuses on the description of this integration in terms of information and knowledge models, from the point of view of landscape design. We emphasize on the description of CLIM, an interactive tabletop we have developed to support collaboration and planning of landscape, which is constructed using models of information and knowledge to perform assessments, including quantitative aspects of effectiveness, efficiency and satisfaction of certain features of the Georgia Tech Campus.
keywords	Campus Information Modeling; Landscape Modeling; Landscape Planning; Knowledge-based Design; Interactive Tabletop
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia13_087
id	acadia13_087
authors	Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J.; Haberl, Jeff S.; Yan, Wei
year	2013
title	Visualization of Building Energy Performance in Building Information Models
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 87-92
doi	https://doi.org/10.52842/conf.acadia.2013.087
summary	This paper presents the results of research and development of Building Energy Simulation (BES) visualization methods. In this effort the authors used Building Information Modeling (BIM) Authoring Tools’ Application Programming Interface (API) to visualize BES results in BIM. We also used an external database to store and manage the object-based simulation results from a BES tool. Based on these methods, we created a prototype: Building Energy Performance Visualization (BEPV), which translates information from the result database to the Energy Performance Indicator (EPI) parameter in BIM. Using the prototype, when BIM models are created for building design, the building energy performance can be expressed visually as color-coding on the BIM, allowing users to see energy flows directly. The developed prototype lets architects use BIM as a common user interface for building design and performance visualization, and may improve their designs in early stages.
keywords	building information model, information visualization, interdisciplinary design, performance based design, simulation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2013_208
id	caadria2013_208
authors	Kim, Jong Bum; Mark J. Clayton and Wei Yan
year	2013
title	Parameterize Urban Design Codes with BIM and Object-Oriented Programming
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 33-42
doi	https://doi.org/10.52842/conf.caadria.2013.033
wos	WOS:000351496100004
summary	There has been a significant need for the new urban design apparatus that carries out performance analyses of the urban models, since the code reform movements focused on the sustainable urban developments. This research explores the use of parametric Building Information Modeling to enable stakeholders to intuitively understand the implications and consequences of urban design codes. We investigate whether key regulations can be captured as algorithms and ontologies in parametric BIM and Object-Oriented Programming. Then we present our prototype of parametric urban models in a BIM platform that explains (1) the extent which urban design code information can be parameterized in BIM and (2) the methods how parametric models can hold code information. The results show that our prototype enables real-time manipulations of code requirements and interactive visualization of code allowances.
keywords	Parametric modelling, BIM, Object-oriented programming, Urban design codes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_034
id	ecaade2013_034
authors	Kocaturk, Tuba and Kiviniemi, Arto
year	2013
title	Challenges of Integrating BIM in Architectural Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 465-473
doi	https://doi.org/10.52842/conf.ecaade.2013.2.465
wos	WOS:000340643600047
summary	This paper provides a critical overview of some of the fundamental issues regarding the adoption and integration of BIM – both as a method and as a technology – in Architectural education. It aims to establish a common ground for the rationale behind such integration and reflects on the past and present state of the cultural, intellectual, professional and technological context of Architecture. The paper will introduce the core issues to be considered in order to succeed in this challenging and transformational process. It will also introduce a framework for a gradual and progressive adoption of BIM and integrated design in the architectural curriculum.
keywords	Architectural education; BIM and integrated design; distributed cognition; integrated design studio.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2017_062
id	sigradi2017_062
authors	Lima da Silva, Juliano; Andréa Quadrado Mussi, Lauro André Ribeiro, Thaísa Leal da Silva
year	2017
title	Programação em plataforma BIM e a Norma de Desempenho Brasileira: Desenvolvimento de uma aplicação para estimativa de performance acústica em projetos arquitetônicos [BIM platform programming and Brazilian Performance Standard: Development of an application to estimate acoustic performance in architectural design]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.423-428
summary	The Brazilian Performance Standard (NBR 15.575/2013 – Housing Buildings – Performance) is changing the design process of residential buildings, imposing new acoustic performance criteria. In this Context, the present paper proposes the programming of a Revit plug-in for verifying sound insulation of walls between environments, collecting information of the building’s model from a parameter database, calculating values of the elements’ sound reduction index and allowing to ponder constructive systems’ performance. The application aims to amplify productivity of designers and to provide greater control over technological solutions, assisting in the compliance with performance criteria.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2013_238
id	sigradi2013_238
authors	Lima, Fernando; Vinícius Morais; Frederico Braida; Raiane Duque
year	2013
title	Protótipo Virtual a partir da Plataforma BIM: Uma Base Digital de Dados para Estudos Simulativos de Cenários Ambientais e Mapeamento de Infra-estrutura [Virtual Prototype from the BIM platform: A digital Database for Environmental Simulation Studies and Infrastructure Mapping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 297 - 301
summary	In this article is presented some results of the studies and data obtained in the undergraduates’ research project linked to the Architecture and Urbanism curse of the Federal University of Juiz de Fora (UFJF), in which a digital evaluative approach of environmental performance of buildings in the campus is pursued. In this paper is reported the unfolding of this research project that aims to develop a virtual prototype in Building Information Modelling platform of a campus construction, and its application in environmental simulation studies as well as the management of the building´s information as-built.
keywords	Virtual Prototype; Building Information Modeling; Simulation Studies
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_271
id	sigradi2013_271
authors	Lobos, Danny; Gerth Wandersleben; Lorena Silva Castillo
year	2013
title	Mapeo de Interoperabilidad entre BIM y software de Simulación Energética para Chile [Mapping the Interoperability between BIM and Energy Simulation Software for Chile]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 378 - 382
summary	The Research focuses on possible links between (Building Information Modeling), the Building Energy Performance Requirements and BPS software (Building Performance Simulation). It is expected to establish critical paths within the interoperability processes between BIM and BPS to support architects and energy consultants to choose the most appropriated workflow for the analyzed buildings to fulfill the performance requirements given by the Chilean laws. Several study cases in interoperability and the state-of-the-art are presented and discussed. Finally a novel map of relation between these three areas is presented.
keywords	Building information modeling; Building performance simulation; Building performance standards; Architectural design, Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: