Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 115

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_205
id	ecaade2013_205
authors	K_nayo_lu, Gökhan
year	2013
title	A Novel Method for Revolved Surface Infrastructures
doi	https://doi.org/10.52842/conf.ecaade.2013.2.297
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 297-303
summary	This paper presents an algorithm for the formation of single or double curved revolved surface’s infrastructures through standardized parts. Any revolved surface can be generated with only two types of parts, interconnected by a ribbed structure technique. The proposed method differs from the accustomed orthogonal rib structures by the varying angle in-between coupling parts. The algorithm can be customized through several parameters like the number, width of parts and thickness of the material used for the infrastructure. The algorithm also offers an advantageous nesting pattern with minimum loss of material regardless of the revolved surface cross-section.
wos	WOS:000340643600030
keywords	Revolved surface; standardization; ribbed structure; contouring; nesting pattern.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013r_017
id	ecaade2013r_017
authors	Meghna, Saiqa I.; Chowdhury, Suvro S.
year	2013
title	Contextual customization of design process. Design through the digital and the material
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 205-216
summary	In contemporary world, digital technologies have initiated new architectural languages and have eased the way to communicate them directly from initial design phase to production facilities, allowing for the construction of complex geometries with the use of ever evolving techniques and tools. When the emergence of a substance depends on the material behavior, the design interest shifts towards the ‘formation’ instead of the ‘final form’. Regarding these the design procedures will be discussed from the premise where architecture will be perceived through an evolution process that deals with the coherent variables of elements and shifting parameters within a context. However, there are crucial questions about its application in the contexts which have lower access to contemporary technologies although digital technology has already influenced almost every aspects of the culture of the respective context. Besides, the huge production cost has limited its adaptability in many under developed and developing countries where the construction field relies mainly on traditional and low-tech methods. The paper is an effort to give attention on exploration of the new-found freedoms of material computation in close connection with the respective context by inventing new design processes, material applications and custom devices. It is the time to experiment with flexible, mobile and low-cost fabrication methods applicable to different scenarios while achieving the complexity of the contemporary architectural ge¬ometries. Thus an equal focus has to be given to speculate about projects that are site-specific, custom¬ized and adapted to local climatic conditions and technical know-how, in areas that traditionally have limited access to new technologies.
keywords	Complex geometries, material behavior, custom devices, low-cost fabrication, design process
email
last changed	2013/10/07 19:08

_id	ecaade2013_278
id	ecaade2013_278
authors	Oxman, Neri; Laucks, Jared; Kayser, Markus; Gonzalez Uribe, Carlos David and Duro-Royo, Jorge
year	2013
title	Biological Computation for Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2013.1.585
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 585-594
summary	The formation of non-woven fibre structures generated by the Bombyx mori silkworm is explored as a computational approach for shape and material optimization. Biological case studies are presented and a design approach for the use of silkworms as entities that can “compute” fibrous material organization is given in the context of an architectural design installation. We demonstrate that in the absence of vertical axes the silkworm can spin flat silk patches of variable shape and density. We present experiments suggesting sufficient correlation between topographical surface features, spinning geometry and fibre density. The research represents a scalable approach for optimization-driven fibre-based structural design and suggests a biology-driven strategy for material computation.
wos	WOS:000340635300061
keywords	Biologically computed digital fabrication; robotic fabrication; finite element analysis; optimization; CNC weaving.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2013_393
id	sigradi2013_393
authors	Cavieres, Andres; Joseph Goodman
year	2013
title	The Role of Functional Knowledge in Multidisciplinary Design: The Case of Solar Energy Integration in Buildings
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 333 - 337
summary	The paper presents a model-based methodology to support multidisciplinary collaboration for the application of photovoltaic systems to buildings. It focuses on the representation of domain specific knowledge necessary for the design of novel PV racking and mounting structures, based on principles of multi-functionality and functional integration. The proposed representation is based on a language for modeling functional requirements in terms of causal behaviors. These behavioral models provide common ground not only for multidisciplinary design, but also for the elaboration of performance metrics and verification procedures for evaluation of design alternatives. The paper concludes with a discussion on the potential of Model-based approach to support innovation in Design.
keywords	Knowledge representation; Functional requirement; Model-based systems Integration; Multidisciplinary design; Solar energy
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia13_401
id	acadia13_401
authors	Rogers, Michael James
year	2013
title	Formicis: A Study In Behavioral Componentry
doi	https://doi.org/10.52842/conf.acadia.2013.401
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 401-402
summary	The Formicis Project translates the natural structure-building phenomena of ant-bridges into architectural componentry that intuitively self-aggregates into goal-oriented structures.
keywords	Branching, Ant, Bridge, Script, Flexible, Agent
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:56

_id	sigradi2013_158
id	sigradi2013_158
authors	Soza, Pedro; Matthew Swarts; Paula Gomez; Jonathan Shaw
year	2013
title	On the Process of Building Knowledge to Support the Design of Digital Tools: A Case Study for Future Residential Buildings on Campus
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 66 - 70
summary	This article presents the process of building knowledge to inform the process of developing a design application for mid-size urban settings. We call such an application Campus Information Modeling – CIM. Four different strategies are exposed, with special interest in a behavioral study regarding users’ qualitative evaluation of buildings they inhabit and how such information will be used in the design of the CIM tool. Finally, implications and future research are discussed.
keywords	Campus Information Model; Building knowledge; Behavioral Study; Software Design
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2013_347
id	sigradi2013_347
authors	Baerlecken, Daniel; Katherine Wright Johnson
year	2013
title	Nominalized Matter - Generative Textiles Procedures
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 515 - 519
summary	This paper investigates making as a process that brings together diverse materials and combines their flow in anticipation of what might emerge. Ingold calls this approach the textility of making, which gives priority to the formation of materials as a process, in which form is generated through interventions within fields of forces and currents of materials and not through a predefined notion of an ideal outcome , opposes the Aristotelian “hylomorphic approach” which focuses on final products.
keywords	Analogue computing; Craft; Design methodologies; Form finding; Textiles
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2016_672
id	sigradi2016_672
authors	Bianchi, Alejandra S.; Tripaldi, Gustavo A.; Pintos, Gladis E.; Iturriaga, José R.; Vargas, Sergio D.
year	2016
title	Impacto del mundo digital sobre las representaciones gráficas del dise?o arquitectónico. La experiencia en el Taller Virtual de Arquitectura IV-UPC-UNNE [Digital world impact over the graphics representations of the architectural design. The experience in the virtual workshop of architecture IV-UPC-UNNE]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.123-128
summary	The present work explains the preliminary results of the Research project that the authors are working on to know the way in which the architecture students of the UNNE represent the architectural object with analogues and digital methods. It wants to express the impact of the digital world over the representations through cross sections in five moments of their formation (beginner’s level, first, second, fourth and sixth years) in the school calendars 2013 to 2016. This qualitative research, descriptive and explanatory, expands in the virtual workshop, an innovative and unique experience of a collaborative workshop between the subjects of Architecture IV of different Universities.
keywords	Graphic Representation, Architectural Design, Virtual Workshop
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia13_179
id	acadia13_179
authors	Geiger, Jordan
year	2013
title	An Adaptive Architecture for Refugee Urbanism: Sensing, Play, and Immigration Policy
doi	https://doi.org/10.52842/conf.acadia.2013.179
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 179-182
summary	Now more than ever, architecture’s entanglement with human-computer interaction (HCI) is conditioned by a host of global forces: telecommunications networks and their infrastructures in satellites and subsea fiber-optic cables, but also international legal and financial mechanisms, climate events and other forces that amalgamate rapidly and recast the ways that the built environment responds. These affect the architecture and HCI of air travel, of agriculture, of high-speed trading and more. Further, they place the formation and experience of architecture in between scales; between the handheld device and the satellite. An adaptive architecture in this context is one that deploys familiar HCI protocols and technologies but reasserts the subjective figure and its space. The project currently in progress, Beau-Fleuve, is an attempt at such an adaptive architecture.Addressing the novel phenomenon that is “refugee urbanism”, this mobile play structure hosts immigrant and refugee youth, revisits some of the tracking that attended their global migration and mines wireless transcriptions of their recorded input. Data from those recordings subsequently build an online map to which participants can return and discover some of the invisible legal mechanisms that enabled their movements. The structure’s responsiveness is therefore conditioned socially and physically, but also legally.
keywords	TOOLS and INTERFACES: human-computer interfaces
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2013_017
id	caadria2013_017
authors	Lin, Chieh-Jen
year	2013
title	Visual Architectural Topology – An Ontology-Based Visual Language Tool in an Architectural Case Library
doi	https://doi.org/10.52842/conf.caadria.2013.003
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 3-12
summary	This paper aims to develop a tool entitled “Visual Architectural Topology (VAT)” for encoding topological information within a case library. VAT can annotate design objects and their topological in-formation within the unstructured information of a design case. By applying an ontology-based topological validation mechanism, VAT aims to establish a visual language for representing the “topological knowledge” of architectural design objects in a case library. The pur-pose of VAT is to extend the knowledge representation ability of a de-sign case library, and to provide a foundation for development of a design-assistance tool performing the conversion and processing among semantic and geometric design information.
wos	WOS:000351496100001
keywords	Case-based design, Case library, Architectural topology, Semantic ontology, Visual language
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.497
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013r_015
id	ecaade2013r_015
authors	Sjarifudin, Firza U.
year	2013
title	Kinetic decorative ornaments using parametric camshaft mechanism for adaptive building skin
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 183-192
summary	In most of Indonesian traditional architecture, are seen using decorative ornaments on its building skin. Nowadays those traditional decorative ornaments are no longer used because it is considered old-fashioned and have no technical function that does not match the design of modern buildings, so the traditional characteristics and locality of the building is lost. This paper offers a development of the building skin that aims to revive a new expression of traditional decorative elements by applying digital technology as well as having an adaptive function. Most of the adaptive building skin uses kinetic techniques in order to make its formation transformable. This paper proposes a camshaft mechanism system to transform the pattern of traditional ornament that uses pre-programmed analysis data of environmental changes to parametrically drive the number of rotation phase and length of nose (Lobe Lift) that generates the shape of camshaft. Furthermore, this shapes drives the transformation of the basic pattern. In conclusion, this paper has developed a prototypical tool that facilitates the new approach to kinetic decorative ornaments on building skin.
keywords	Decorative ornaments; Adaptive building skin; Camshaft mechanism; Kinetic building; Building Technology
email
last changed	2013/10/07 19:08

_id	ijac201310201
id	ijac201310201
authors	Verovsek, Spela; Matevz Juvancic, Tadeja Zupancic
year	2013
title	Understanding and interpreting urban space (in)formation
source	International Journal of Architectural Computing vol. 11 - no. 2, 135-156
summary	This paper introduces a novel approach to understanding the complex information and logics of urban spaces by the non-professional public. A model for Interpretation of Qualities in Urban Space (aMIQUS) is proposed. The objectives are threefold: first, to form common, valid and applicable measures to assess features of space design; second, to indicate the developmental trait that considerably affect users' spatial experience which - taken as a consequence - derives from either sustainable/prudent or poor design decisions; and third, to generically recreate and visually represent urban spaces for communicative purposes. The model represents an identification method, not a problem-solving mechanism and is intended as a pragmatic instrument for recognizing crucial information, narrative, embedded in spatial scene. Model is followed by the initial idea to extend it in terms of an educational digital interface for the general public, participating in the process of urban decision-making. The paper concisely summarizes both theoretical and applicative efforts.
keywords	Spatial information, interpretation model, public participation, sustainable design, spatial qualities
series	journal
last changed	2019/05/24 09:55

_id	ijac201310207
id	ijac201310207
authors	Abondano, David
year	2013
title	The Return of Nature as an Operative Model: Decoding of Material Properties as Generative Inputs to the Form-Making Process
source	International Journal of Architectural Computing vol. 11 - no. 2, 267-284
summary	The abandonment of nature as an architectural model and the redefinition of the relationship between form and material were two of the main consequences of industrialization for modern architecture. While nature was replaced by the machine as a model for architecture, industrial production suppressed the craftsman's knowledge of the material and the associated techniques once essential to the form-making process. Thus, the replacement of nature as a model implied that principles once related to natural processes started to be seen as industrial values, i.e., the economy of means stopped being recognized as a quality related to natural form-making processes and became a demand of industrial production. Nowadays, material properties and nature are being reintroduced into architecture with the help of digital technologies; that is, the return of nature though computation. As a result, nature has become an operational model as opposed to the visual or iconic one it used to be; its inner qualities and processes are being decoded in order to inform the form-making process and foster innovative digital ornamentation.
series	journal
last changed	2019/05/24 09:55

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	acadia13_281
id	acadia13_281
authors	Ahlquist, Sean; Menges, Achim
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
doi	https://doi.org/10.52842/conf.acadia.2013.281
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 281-292
summary	Material behavior can be defined as the confluence of associative rules, contextual pressures and constraints of materialization. In more general terms, it can be parameterized as topologies, forces and materiality. Forming behavior means resolving the intricate matrix of deterministic and indeterministic factors that comprise and interrelate each subset of these material- nherent conditions. This requires a concise design framework which accumulates the confluent behavior through successive and cyclical exchange of multiple design modes, rather than through a single design environment or set of prescribed procedures. This paper unfolds a sequencing of individual methods as part of a larger design framework, described through the development of a series of complex hybrid- structure material morphologies. The “hybrid” nature reflects the integration of multiple force-active structural concepts within a single continuous material system, devising both self-organized yet highly articulated spatial conditions. This leads primarily to the development of what is termed a “textile hybrid” system: an equilibrium state of tensile surfaces and bending-active meshes. The research described in this paper looks to expose the structure of the textile as an indeterministic design parameter, where its architecture can be manipulated as means for exploring and differentiating behavior. This is done through experimentation with weft-knitting technologies, in which the variability of individual knit logics is instrumentalized for simultaneously articulating and structuring form. Such relationships are shown through an installation constructed at the ggggallery in Copenhagen, Denmark.
keywords	Material Behavior, Spring-based Simulation, CNC Knitting, Form- and Bending-Active, Textile Hybrid Structures.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_235
id	ecaade2013_235
authors	Akküçük, Zeynep and Özkar, Mine
year	2013
title	Ruling Im/Material Uncertainties
doi	https://doi.org/10.52842/conf.ecaade.2013.2.305
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 305-314
summary	Visual rules are powerful in loosely capturing the impact of material behavior on form in designer’s hands-on experimentation. They present a first step to translate the causal relations between material and form to computation without sacrificing the uncertainties in the designer’s interaction with the materials. This study investigates how to model the relation between material and form with visual rules so that the model embodies some of the phenomenological aspects of reality, rather than merely reproducing it.
wos	WOS:000340643600031
keywords	Digital materiality; physics-based modeling; abstractions; visual schemas; shape studies.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_243
id	sigradi2013_243
authors	Andia, Alfredo
year	2013
title	Automated Architecture: Why CAD, Parametrics and Fabrication are Really old News
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 83 - 87
summary	Automation is transforming a significant number of industries today. This paper discusses how the Design and Construction industry is also entering into a new era of automation. In the paper I observe that designers are automating by using parametric tools (BIM, scripting, etc.) while contractors are moving into pre-fabrication and modularization. Both conceptualizations are incomplete. The paper presents how we are in the first steps of creating learning algorithms that develop specific intelligence in design synthesis and how the design field will became even more sophisticated as a second generation of multi-material 3D printing techniques produce new materials.
keywords	Automation; Architectural design; Artificial intelligence; Learning algorithms; Multi-material printers
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
wos	WOS:000340635300028
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_249
id	ecaade2013_249
authors	Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year	2013
title	Bioinformed Performative Composite Structures
doi	https://doi.org/10.52842/conf.ecaade.2013.1.575
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
summary	This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
wos	WOS:000340635300060
keywords	Bioinformed; multi-material; composite; parametrics; performative design.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: