Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_405
id	ecaadesigradi2019_405
authors	da Cunha Teixeira, Luísa and Cury Paraizo, Rodrigo
year	2019
title	Caronae - ridesharing and first steps into commuting opportunitie of academic exchange
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 805-816
doi	https://doi.org/10.52842/conf.ecaade.2019.1.805
summary	Location-based mobile applications have been a rising theme for academics in the field of urbanism and in urban and transportation, because of the potential of transformation they might bring to the urban landscape (De Souza e Silva, 2013). One of the possibilities we study here is to observe social encounters fostered by commuting rides. In this paper, we try to examine the practice from the broad perspective of estimating the environmental benefits, in a context where digital information technology is wielded to address problems old and new (Townsend, 2014). This paper aims to analyze the potential of transformations that new ICTs bring to urban mobility, using as case study the official ridesharing system of the Federal University of Rio de Janeiro, the Carona? project. The system was developed focusing on the reduction of the number of motorized trips to the University, as well as the amount of CO2 generated by them. Here we analyze the dynamics of ridesharing, using the system data, and also try to observe the role it may play towards the promotion of integration in the UFRJ community.
keywords	mobile apps; urban mobility; ridesharing; caronae ufrj
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	sigradi2013_138
id	sigradi2013_138
authors	Dezen-Kempter, Eloisa
year	2013
title	Diálogos Digitais: Integração entre Dados Documentais em Sistemas de Informação Baseados no Modelo para Conservação do Patrimônio Arquitetônico [Digital Dialogues: Integration of Documentary Data in Model-Based Information Systems for the conservation of the architectural heritage]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 293 - 296
summary	The architectural documentation plays a key role in the preservation of built heritage, as both support decision making in intervention projects, restoration and rehabilitation, such as the actions of preventive conservation. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. The aim of this research is to develop the integration of quantitative data (smart objects, performance data) and qualitative (photographs and historical documents) in model-based information, such as BIM, to be used in surveying, planning and control of interventions in historic buildings.
keywords	BIM; Architectural Conservation databases; Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013r_008
id	ecaade2013r_008
authors	Gargaro, Silvia; Fioravanti, Stefano
year	2013
title	Traditions based on context. How context ontologies can help archaeological sites.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 105-114
summary	Nowadays ICT tools are part of the cultural tradition of designers and over time have replaced pencil and paper in design development. The application programs for design are many and for different purposes, but the role and importance of Context often are underestimated. For new tradition, it needs “Context Knowledge Model” based on ontologies for the management of buildings and preservation and enhancement of cultural heritage with technological innovation. Context modeling gives the opportunity to address the management of pre-existing building in a conscious way. The interoperability of data and knowledge of Context is important to analyze the quality of building process. This is based on standard concepts of the project for the recovery and restoration of the buildings starting from knowledge of context. The goal of this research is to exploit information technology to advance and define knowledge of context monitoring, management and maintenance of historic buildings. The representation of context is important to understand physical, social, economic and normative Context in which the building was placed. The process used to analyze Context entities were Ontologies. This theoretical model will be applied to underground archaeological Roman sites, to implement semantic levels in IFC and BIM for building design.
keywords	Archaeological sites, Collaborative design, Context, Ontology, Design Process
email
last changed	2013/10/07 19:08

_id	sigradi2013_315
id	sigradi2013_315
authors	Rodriguez, Awilda; Paolo Sanza
year	2013
title	Visualizing the (in)Visible: Mapping Culture and the Forces that Shape the Urban Experience
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 95 - 98
summary	Digital technologies not only have made information accessible but also have exponentially generated new data. The continue growth of urban GIS and pervasive computing is helping us analyze human interactions in unprecedented ways. Yet, when researching urban sites, the students’ task is conventionally limited to the analysis of aggregate spatial data that does not reveal the invisible forces acting upon the site. The limitation of this approach is further evident if students cannot visit the site. This paper explores the role of information visualization to uncover uncommon site forces and to supplement students’ lack of embodiment with far distanced sites.
keywords	Information visualization; Mapping, Urban environments
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ecaade2013_255
id	ecaade2013_255
authors	Stavrakantonaki, Marina
year	2013
title	Daylight Performance Simulations and 3D Modeling in BIM and non-BIM Tools
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 535-542
doi	https://doi.org/10.52842/conf.ecaade.2013.2.535
wos	WOS:000340643600054
summary	The fusion between building assessment and design can lead to better informed design decisions. Performance oriented design is better supported through the use of interoperable file formats for data exchange between BIM and non-BIM tools. At the same time, the parameters that influence the calculation during a performative assessment are no longer a purely engineering problem, since 3D modeling is of primary importance in defining the numerical output. The role of the designer along with the selection of the tools becomes all more relevant in this direction. A framework is presented hereby, which can be used for the selection between different BIM tools for daylight assessment. An insight is also given on the major parameters that can affect the outcome and on the obstacles that were experienced in four case-studies in relation to data exchange and information flow.
keywords	Performance simulations; parameters; interoperability; daylight.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia13_043
id	acadia13_043
authors	Michalatos, Panagiotis; Payne, Andrew O.
year	2013
title	Working with Multi-scale Material Distributions
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 43-50
doi	https://doi.org/10.52842/conf.acadia.2013.043
summary	At present, computer aided design (CAD) software has proven ill equipped to manage the spatial variations in material properties. Most digital design packages employ a surface modeling paradigm where a solid object is that which is enclosed by a set of boundaries (known as boundary representations or “B-rep” for short). In surface models, material representations are often treated as homogenous and discrete. Yet, natural materials are capable of structures where the variability of material within a volume is defined at a multiplicity of scales and according to various functional criteria. With the advent of new 3D printing techniques, a new possibility emerges—allowing new multi-material composite objects to be fabricated in a single build volume with a high degree of dimensional accuracy and repeatability. However, a big limitation facing complex high resolution digital fabrication comes from the software’s inability to represent or handle material variability. This paper proposes a new digital interface for working with multi-material distributions at a variety of scales using a rasterization process. Beyond the immediate benefit of precise graduated control over the material distribution within a 3D printed volume, our interface opens new creative opportunities by enabling the use of existing image processing techniques (such as filtering, mapping, etc.) which can be applied to three-dimensional voxel fields. Examples are provided which explore the potential of multi-scale material distributions.
keywords	next generation technology, multi-material 3D printing, digital interfaces, voxel fields, rasterization
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2013_297
id	ecaade2013_297
authors	Aish, Robert
year	2013
title	DesignScript: Scalable Tools for Design Computation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 87-95
doi	https://doi.org/10.52842/conf.ecaade.2013.2.087
wos	WOS:000340643600008
summary	Design computation based on data flow graph diagramming is a well-established technique. The intention of DesignScript is to recognise this type of data flow modeling as a form of ‘associative’ programming and to combine this with the more conventional ‘imperative’ form of programming into a single unified computational design application. The use of this application is intended to range from very simple graph based exploratory ‘proto-programming’ as used by novice end-user programmers to multi-disciplinary design optimisation as used by more experienced computational designers.
keywords	Graph; scripting; associative; imperative.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_161
id	acadia13_161
authors	Akbarzadeh; Masoud
year	2013
title	Performative Surfaces: Generating complex geometries using planar flow patterns
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 161-172
doi	https://doi.org/10.52842/conf.acadia.2013.161
summary	This research explains the development process of a design tool that can construct complex surface geometries using only two-dimensional plan drawings. The intention behind this tool is to address certain complex behavior of surface geometries such as hydrological characteristics. This paper briefly explains the historic and mathematic description of surface data structures, according to Cayley, Maxwell and Morse. This is followed by a brief introduction of the surface network/critical graph extraction technique in GIS. Additionally, the algorithm of contour extraction from asimple critical graph to reconstruct a surface is explained. In the final section the lessons learnedfrom the previous sections are used to develop algorithms for a tool which uses only plan drawings to construct complex surfaces. Three algorithms are explained in the final section among which the third one is considered to be the most complete and promising approach. Therefore,some design examples are presented to show the flexibility of the tool. At the end, this paper provides suggestions and discussions to reflect further ideas in order to improve the tool in future.
keywords	Tools and Interfaces, complex surface, drainage patterns, discrete flow diagram, surface networks, critical graph, and surface generation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_112
id	sigradi2013_112
authors	Akemi Omine, Katia; José Neto de Faria; Karine Itao Palos
year	2013
title	Projeto Design Condensado: Definição de ‘Modelo Sociocultural’ para Sistemas de Visualização Dinâmica de Dados que Estimulem a Geração de Novos Conhecimentos sobre a História do Design [Condensed Design Project: The Definition of a ‘Social-cultural Model’ for Dynamic Data Visualization Systems Which StimulateKnowledge Building in Design History]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 143 - 147
summary	The ‘Condensed Design Project’ aims to discuss and reflect on how the definition of an ‘activity inducer’, by describing and characterizing ‘social-cultural models’, can be used in the development of dynamic data visualization systems. The aim is to discuss and try to understand how the profile of the ‘activity inducer’, routines, scenario and context impact the navigation, interaction, research and learning processes in design history. Thus, the knowledge building process is strictly conditioned to the way the relation between the ‘visualization system’ and the ‘activity inducer’ is promoted, considering the technological limitations and the individual’s predisposition.
keywords	Data visualization; Design history; Usage context, Experience; Knowledge
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2013_021
id	caadria2013_021
authors	Alhadidi, Suleiman
year	2013
title	Generative Design Intervention: Creating a Computational Platform for Sensing Space
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 345-354
doi	https://doi.org/10.52842/conf.caadria.2013.345
wos	WOS:000351496100034
summary	This paper outlines some investigations from a project which utilizes computing and scripting of specific site components, spatio-temporal movement and behavioural patterns to explore how designer might understand people activities and formulate design interventions within public spaces. This research looks at how generative tools can facilitate designers to integrate the large volume of information received by hybrid data collection, and conventional data analysis directly into the design process. Through an examination of sensing urban space, this research proposes a method to track and record people’s movement patterns in order to implement them via generative design tool. To facilitate this, a scripting method is specified; which uses sensors and motion tracking devices to capture the use of a specific public space. This project proposes a methodology for developing designed spaces and optimal pathways generated from real-time data and feedback captured by sensors.
keywords	Real-time computation, Generative design, Sensing space, Design simulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_249
id	ecaade2013_249
authors	Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year	2013
title	Bioinformed Performative Composite Structures
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
doi	https://doi.org/10.52842/conf.ecaade.2013.1.575
wos	WOS:000340635300060
summary	This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
keywords	Bioinformed; multi-material; composite; parametrics; performative design.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_036
id	ecaade2013_036
authors	Bernhard, Mathias
year	2013
title	Frequency Analysis of Wood Textures
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 597-603
doi	https://doi.org/10.52842/conf.ecaade.2013.1.597
wos	WOS:000340635300062
summary	“Frequency analysis of wood textures” presents the application of Fourier analysis to translate images of wood textures to the frequency domain. With this encoding, a lot more details can be captured by the same amount of data points than with other descriptions in the spatial domain. A small set of overlapping waves with different frequencies, magnitudes and phase angles allows to characterize the main features of the wood’s grain texture and to quantify and classify different samples. The sample’s color information is thereby enhanced with an array of direction vectors, describing the local orientation distribution.
keywords	Wood; Fourier analysis; pattern recognition; information theory.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_078
id	caadria2013_078
authors	Briscoe, Danelle and Arman Hadilou
year	2013
title	Collective Intelligence: An Analytical Simulation of Social Interaction with Architectural System
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 375-384
doi	https://doi.org/10.52842/conf.caadria.2013.375
wos	WOS:000351496100037
summary	This paper proposes an architectural system interactive to both users and the environmental condition in real-time. While nature acts as a global control for the system, the user can alter it locally. Due to the increasing digitization of our contemporary culture, there is an unprecedented capacity for information to flow in our physical and socially net-worked world that can be used to inform design problems and processes. Live and real-time information sources, like Twitter, could be virtually scanned for specific data input associated to a par-ticular geometrical manipulation. This process enables a collective group of users to inform the system. As the number of users increases there is collaboration for defining the form which is different from single user interaction. Since the model is associated with a specific definition of generative behaviours as described by the words, these definitions could be used as the
keywords	Real-time data streaming; crowd-sourcing; interactive architectural system.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia13_071
id	acadia13_071
authors	Burry, Jane; Salim, Flora; Williams, Mani; Anton Nielsen, Stig; Pena de Leon, Alex; Sharaidin, Kamil; Burry, Mark
year	2013
title	Understanding Heat Transfer Performance for Designing Better Façades
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 71-78
doi	https://doi.org/10.52842/conf.acadia.2013.071
summary	This early research focuses on the design of building façades to mediate external and internal thermal conditions. It explores new workflow for accessible feedback into the early design of façade systems. Specifically, this research aims to explore the level of corroboration or the gap between predictions of thermal behavior using digital modeling and simulation, and the empirical measurement of thermal behavior in physical analog models for façade design.
keywords	Tools and Interfaces: façade design, heat transfer, performance-based design, simulation, data visualization.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

For more results click below: