Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 222

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_027
id	ecaade2013_027
authors	Etman, Omar; Tolba, Osama and Ezzeldin, Sherif
year	2013
title	Double-Skin Façades in Egypt between Parametric and Climatic Approaches
doi	https://doi.org/10.52842/conf.ecaade.2013.1.459
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 459-465
summary	Daylight is a crucial element for indoor environment quality. Office buildings commonly use fully glazed façades to reflect a luxurious appearance and to maximize natural light at the expenses of high energy consumption due to cooling/heating. Double-skin façades are one of the solutions that improve the building efficiency while maintaining good natural lighting. This paper studies the impact of various perforated outer skins for non-sealed double-skin facades on light quality in prototypical office space in Egypt using parametric design. A traditional solution for light such as the Mashrabiya is taken as an inspiration for this study to generate different forms of perforated screens. The cases were analysed using light simulation tool and sorted by a genetic algorithm to show best 30 solutions offered by the design criteria. A methodology to achieve these objectives was suggested in this paper to reach better light quality in indoor spaces.
wos	WOS:000340635300048
keywords	Double-skin façades; parametric design; mashrabiya; genetic algorithms; illumination.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	ecaade2013_051
id	ecaade2013_051
authors	Ianni, Manuela and Sánchez de León, Michelle
year	2013
title	Applying Energy Performance-Based Design in Early Design Stages
doi	https://doi.org/10.52842/conf.ecaade.2013.1.031
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 31-40
summary	In current architectural practice some important changes are taking place because of the development of numerous Building Performance Simulations (BPS) tools to support design decisions during early phases of the design process. Many difficulties still persist, however, not necessarily due to the limitations of the available technology, but to the lack of appropriate methodologies to use the existing tools to improve the decision making process, particularly at the early design stages. In this work we present an application of performance-based design in early design phases, with the purpose to take better-informed decisions which would ultimately contribute to improve the energy performance of buildings.
wos	WOS:000340635300002
keywords	Energy performance-based design; design methodology; design decision-making process; building energy efficiency; building performance simulation tools.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013_114
id	ecaade2013_114
authors	Lin, Shih-Hsin Eve and Gerber, David
year	2013
title	Evolutionary Energy Performance Feedback for Design (EEPFD)
doi	https://doi.org/10.52842/conf.ecaade.2013.2.175
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 175-184
summary	In order to understand the applicability of multidisciplinary design optimization (MDO) to the building design process, a MDO framework, titled Evolutionary Energy Performance Feedback for Design (EEPFD), along with the prototype tool, H.D.S. Beagle, were developed to support designers with the incorporation of partially automated performance feedback during the early stages of design. This paper presents 2 experimental case studies, one from the design profession and the other from a design studio, that evaluate the applicability and impact of EEPFD on the early stage design process. Through these two case studies two different interaction and automation approaches for applying EEPFD are explored as part of the framework validation. Observed benefits, challenges and suggestions of EEPFD’s implementation are then presented and discussed.
wos	WOS:000340643600017
keywords	Conceptual energy performance feedback; design decision support; performance-based design; multidisciplinary design optimization; genetic algorithm.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	sigradi2013_326
id	sigradi2013_326
authors	Nome, Carlos A.; Natália Queiroz
year	2013
title	Performance do Edifício: Produtos e Processo para Integração no Projeto Arquitetônico [Building Performance: Products and a Process for Architectural Design Integration]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 357 - 361
summary	The paper presents a case study on BIM supported design processes and its intersections with discussions about sustainability and energy efficiency simulations. The objective of the study is to identify different levels of detail for BIM models that are compatible with sustainability and energy efficiency simulations. As a result an integrated design, model and simulation process is proposed and validated.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
doi	https://doi.org/10.52842/conf.caadria.2013.209
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
wos	WOS:000351496100021
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2013.2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2013.1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2022_51
id	sigradi2022_51
authors	Varsami, Constantina; Tsamis, Alexandros; Logan, Timothy
year	2022
title	Gaming Engine as a Tool for Designing Smart, Interactive, Light-Sculpting Systems
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 617–628
summary	Even though interactive (Offermans et.al., 2013), adaptive (Viani et.al., 2017), and self-optimizable (Sun et.al., 2020) lighting systems are becoming readily available, designing system automations, and evaluating their impact on user experience significantly challenges designers. In this paper we demonstrate the use of a gaming engine as a platform for designing, simulating, and evaluating autonomous smart lighting behaviors. We establish the Human - Lighting System Interaction Framework, a computational framework for developing a Light Sculpting Engine and for designing occupant-system interactions. Our results include a. a method for combining in real-time lighting IES profiles into a single ‘combined’ profile - b. algorithms that optimize in real-time, lighting configurations - c. direct glare elimination algorithms, and d. system energy use optimization algorithms. Overall, the evolution from designing static building components to designing interactive systems necessitates the reconsideration of methods and tools that allow user experience and system performance to be tuned by design.
keywords	User Experience, Human-Building Interaction, Smart Lighting, Lighting Simulation, Gaming Engine
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ecaade2013r_013
id	ecaade2013r_013
authors	Verma, Sushant; Devadass, Pradeep
year	2013
title	Adaptive [skins]: Responsive building skin systems based on tensegrity principles
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 155-170
summary	The project investigates responsive building skin systems that adapt to the dynamic environmental conditions to regulate the internal conditions in a habitable space over different periods of time by exhibiting a state of motion and dynamism. Heat and Light are the primary parameters for regulation, leading to energy efficiency and dynamic spatial effects. Passive and active skins using shape memory alloys and pneumatic actuators are developed through investigations of smart systems that integrate smart materials and smart geometries. The precedents in this domain have rarely dealt with individually controlled multiple parameters of heat and light in a single system, which is attempted in this project. Owing to the complexity of the multi-parametric system, genetic algorithms are developed for system optimization and calibrated with physical prototypes at varied scales. The developed systems are tested against two distinct climatic models- New Delhi and Barcelona, and evaluated for performance, based on heat and light, which are quantified as solar gain and illuminance as principles, and daylight factor for evaluation purpose. The use of genetic algorithms makes the problem solving faster and accurate. New tool-sets are developed in the process by combining various digital tools, to create a real-time feedback and memory loop system.
keywords	Adaptive architecture, Building skins, Genetic algorithms, Tensegrity, Smart materials
email
last changed	2013/10/07 19:08

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_068
id	ecaade2013_068
authors	Attia, Shady and Andersen, Marilyne
year	2013
title	Measuring the Usability, Efficiency and Effectiveness of CAAD Tools and Applications
doi	https://doi.org/10.52842/conf.ecaade.2013.1.147
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 147-155
summary	Computer Aided Architectural Design (CAAD) decisions and judgments have been at the heart of architectural design practice. Despite the increasing popularity of computer aided design applications, measuring the decision making of designers empirically remains elusive. Past research claiming usefulness of the CAD has relied largely on anecdotal or case studies that are vulnerable to bias. The study reviews results of prior investigations. The relatively few laboratory experiments report hardly any empirical results regarding the measurement of CAD decision making. The study provides an overview of the literature of existing measurement methods that have been used in psychology and neuroscience to assess individual variations in design making, and highlight these different measurement methods’ strengths and weaknesses. We conclude with a comparative evaluation of the different measures and provide suggestions regarding their constructive use in building realistic theories of designer’s decision making measurement.
wos	WOS:000340635300014
keywords	Measurement; usability; efficiency; effectiveness; CAAD.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_003
id	ecaade2013_003
authors	Attia, Shady
year	2013
title	Achieving Informed Decision-Making using Building Performance Simulation
doi	https://doi.org/10.52842/conf.ecaade.2013.1.021
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-30
summary	Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to assess the effect of ZEBO and other building performance simulation (BPS) tools on three specific outcomes: (i) knowledge and satisfaction when using simulation for NZEB design; (ii) users’ decision-making attitudes and patterns, and (iii) performance robustness based on an energy analysis. The paper utilizes three design case studies comprising a framework to test the use of BPS tools. The paper provides results that shed light on the effectiveness of sensitivity analysis as an approach for informing the design decisions of NZEBs.
wos	WOS:000340635300001
keywords	Decision support; early stage; design; simulation; architects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_207
id	ecaade2013_207
authors	Bielik, Martin; Schneider, Sven; Geddert, Florian and Donath, Dirk
year	2013
title	Addis Building Configurator
doi	https://doi.org/10.52842/conf.ecaade.2013.1.109
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 109-116
summary	The paper presents ongoing applied research on the development of a computational design tool addressing planning deficiencies in the city of Addis Ababa, Ethiopia. Because of increasing population pressure and a lack of planning resources, Addis Ababa is clearly in need of new efficient planning solutions. The tool proposed utilizes and combines different generative design methods in order to increase the efficiency of planning and construction processes. The paper discusses design goals and the implementation strategy involved.
wos	WOS:000340635300010
keywords	Design tool; evolutionary optimization; generative system; developing countries.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
wos	WOS:000340635300055
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_183
id	caadria2013_183
authors	Choo Thian Siong and Patrick Janssen
year	2013
title	Semi-Transparent Building Integrated Photovoltaic Facades – Maximise Energy Savings Using Evolutionary Multi-Objective Optimisation
doi	https://doi.org/10.52842/conf.caadria.2013.127
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 127-136
summary	The optimisation of semi-transparent building integrated photovoltaic facades can be challenging when finding an overall balanced performance between conflicting performance criteria. This paper proposes a design optimisation method that maximises overall energy savings generated by these types of facades by simulating the combined impact of electricity generation, cooling load, and daylight autonomy. A proof-of-concept demonstration of the proposed method is presented for a typical office facade.
wos	WOS:000351496100013
keywords	Multi-objective optimisation, Semi-transparent building integrated photovoltaic
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_056
id	ecaade2013_056
authors	Fioravanti, Antonio; Avincola, Eolo and Novembri, Gabriele
year	2013
title	Even ‘Clouds’ Can Burn
doi	https://doi.org/10.52842/conf.ecaade.2013.2.029
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 29-37
summary	Architecture, nowadays, is an even more demanding activity in which complexity is the keyword: complex forms, complex functions and complex structures require sophisticated facilities and components, for example, ‘The Cloud’ of D. and M. Fuksas in Rome. These complexities can give rise to numerous risks, among which fire is frequently a central problem. The fire safety norms do not involve an approach integrated with other instruments or building model (BIM), but provide a list of information and constraints. These codes are now shifting away from a prescriptive-based towards a performance-based method due to recent progress in fire safety engineering. Following this approach, a case study simulation of a multi-purpose centre was carried out in Tivoli, near Rome. This simulation allowed greater freedom in architectural composition, a lower risk to people, a larger number of material and building components used and higher safety standards to be achieved. The model is based on the FDS (Fire Dynamics Simulator) language, a simulation code for low-speed flows, focused on smoke, particle and heat transport by fire.
wos	WOS:000340643600002
keywords	Architectural design; computational fluid-dynamics; fire propagation; fire safety; smoke propagation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013_032
id	ecaade2013_032
authors	Foged, Isak Worre
year	2013
title	Architectural Thermal Forms
doi	https://doi.org/10.52842/conf.ecaade.2013.2.099
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 99-105
summary	The paper presents a developed method and algorithm to create environmental sustainable optimised forms based on the solar energy received in relation to receiving, containing and distributing energy. Different studies are created based upon this approach, to which forms are evaluated against conventional building geometries. The work shows a significant improvement on several aspects of environmental performance. Lastly the work presents an idea of maximum structures, rather than minimum structures as a path in future research work.
wos	WOS:000340643600009
keywords	Sustainable environmental architecture; performative generative algorithms; simulation; material distribution.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2013_10
id	sigradi2013_10
authors	Gomez, Paula; Matthew Swarts; Pedro Soza; Jonathan Shaw; James MacDaniel; David Moore
year	2013
title	Campus Landscape Information Modeling: Intermediate Scale Model that Embeds Information and Multidisciplinary Knowledge for Landscape Planning
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 61 - 65
summary	Building Information Modeling (BIM) and Geographic Information Systems (GIS), as their names imply, are models of information at different scales that usually appear segregated. Our proposal is to integrate both scales of information in a Campus Information Model (CIM). This paper focuses on the description of this integration in terms of information and knowledge models, from the point of view of landscape design. We emphasize on the description of CLIM, an interactive tabletop we have developed to support collaboration and planning of landscape, which is constructed using models of information and knowledge to perform assessments, including quantitative aspects of effectiveness, efficiency and satisfaction of certain features of the Georgia Tech Campus.
keywords	Campus Information Modeling; Landscape Modeling; Landscape Planning; Knowledge-based Design; Interactive Tabletop
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: