Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 600

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_190
id	ecaade2013_190
authors	Schwartz, Mathew
year	2013
title	Collaborative and Human Based Performance Analysis
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.ecaade.2013.2.365
wos	WOS:000340643600037
summary	This research presents methods for simulation and visualization of human factors. This allows for a performance based analysis of buildings from the local human scale to the larger building scale. Technical issues such as computational time and mathematically describing a buildings geometry are discussed. The algorithms presented are integrated in a 3D modeling software commonly used in design and architecture through a plugin.
keywords	Universal design; human analysis; collaboration; education; disability.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
doi	https://doi.org/10.52842/conf.caadria.2014
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ecaade2013_244
id	ecaade2013_244
authors	Fiorito, Stefano; Orsi, Francesco; Serdoura, Francisco Manuel and Ferreira, Victor
year	2013
title	Data Extraction from Social Networks for Urban Analyses
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 439-445
doi	https://doi.org/10.52842/conf.ecaade.2013.1.439
wos	WOS:000340635300046
summary	The present work constitutes the first stage of an ongoing research on the interaction between morphological characteristics of the urban fabric and the amount of social activity in such spaces. In order to analyze such correlation, the current research links together two different field of studies: Space Syntax on one side, for the morphological analysis of the spatial configuration of the urban fabric, and a remote sensing study about social activity in the analyzed urban context, on the other. Data extracted from location-based online Social Networks databases (e.g. Foursquare) are employed in order to perform such survey. The resulting methodology constitutes an early attempt to set a novel approach to the study of the relationships between the morphological and configurational characteristics of urban systems and actual human dynamics in urban contexts.
keywords	Space Syntax; urban morphology; remote sensing; social networks; urban dynamics.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013_275
id	ecaade2013_275
authors	Massara, Bruno; Bosi, Felipe; Margotto, Mário and Malheiros, Victor
year	2013
title	Critical Methods in Computer-Mediated Performance and Phenomenology-Based Systems
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 383-389
doi	https://doi.org/10.52842/conf.ecaade.2013.1.383
wos	WOS:000340635300040
summary	The main goal of this article is to provide a critical reflection on what computing may contribute to an open understanding of performance in architecture. We propose a phenomenological approach to computing since it combines several concepts concerning the user’s experience of space. In order to study the human movement in space, we will present the results of a sequence of applications using open source software Processing, including time-lapse movies, frame differencing analysis and blending images tools. The research used the context of a existent building at the campus of Universidade Federal do Espírito Santo. A series of interviews with users were also conducted in order to validate the computing analysis.
keywords	Performance; computing; phenomenology; programming.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2013_049
id	ecaade2013_049
authors	Steinø, Nicolai; Y_ld_r_m, Miray Ba_ and Özkar, Mine
year	2013
title	Parametric Design Strategies for Collaborative and Participatory Urban Design
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 195-203
doi	https://doi.org/10.52842/conf.ecaade.2013.1.195
wos	WOS:000340635300019
summary	Due to the complex nature of urban space and the multitude of interests vested in it, urban design can be described as a complex system. Various disciplines are involved in the analysis and development of urban space. In this respect, collaboration is key in creating socially and physically sustainable urban design. This paper, using a student workshop as a point of departure, discusses the potentials of parametric design as a methodological approach in collaborative urban design between disciplines and with non-professionals.
keywords	Parametric design; collaborative design; participation; urban design; Esri CityEngine.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2014_124
id	caadria2014_124
authors	Williams, Nicholas; Sascha Bohnenberger and John Cherrey
year	2014
title	A System for Collaborative Design on Timber Gridshells
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 441–450
doi	https://doi.org/10.52842/conf.caadria.2014.441
summary	The bent timber laths of the Sound Bites gridshell create two types of performance space over an area of almost 100 m2. Such postformed gridshells are a wellestablished design solution for creating curved forms from linear elements. Extending principles developed since the 1970s, contemporary digital tools have been utilised to drive a renewed interest in them, primarily through so-called form-finding techniques which connect digital and material models through a simulation of shape under bending loads (Nettlebladt, 2013) and the definition of efficient structural geometry acting under compression loads only (Hernandez et. al., 2012). This paper describes the workflow conceived and implemented for the Sound Bites structure. A central challenge of the research was for such a workflow to allow for the principles of gridshell design to be engaged in parallel to other tight constraints and design drivers. As such it needed to facilitate close collaboration between architectural, engineering and fabrication experts. This workflow was tested in the design and realisation of the full-scale structure within a six-week period. The gridshell design was developed through the manipulation of the shape of two edge profiles and the shell form spanning between these. Architectural and fabrication constraints were met and the workflow allowed for a sufficient level of structural analysis to be fed back to inform the design.
keywords	Digital Workflow; Collaborative Design; Digital Formfinding; Digital Fabrication
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2013_003
id	ecaade2013_003
authors	Attia, Shady
year	2013
title	Achieving Informed Decision-Making using Building Performance Simulation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2013.1.021
wos	WOS:000340635300001
summary	Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to assess the effect of ZEBO and other building performance simulation (BPS) tools on three specific outcomes: (i) knowledge and satisfaction when using simulation for NZEB design; (ii) users’ decision-making attitudes and patterns, and (iii) performance robustness based on an energy analysis. The paper utilizes three design case studies comprising a framework to test the use of BPS tools. The paper provides results that shed light on the effectiveness of sensitivity analysis as an approach for informing the design decisions of NZEBs.
keywords	Decision support; early stage; design; simulation; architects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_062
id	ecaade2013_062
authors	Bittermann, Michael S. and Ciftcioglu, Ozer
year	2013
title	Ambient Surveillance by Probabilistic-Possibilistic Perception
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 345-353
doi	https://doi.org/10.52842/conf.ecaade.2013.2.345
wos	WOS:000340643600035
summary	A method for quantifying ambient surveillance is presented, which is based on probabilistic-possibilistic perception. The human surveillance of a scene through observing camera sensed images on a monitor is modeled in three steps. First immersion of the observer is simulated by modeling perception of the scene from the camera locations using probabilistic perception approach. The perceptions are thereafter combined by means of probabilistic union, simulating simultaneous watching of the scene from multiple viewing positions. As third step the combined perceptions are converted to a possibility using triangular possibility density function. The latter step accounts for the fact that surveillance takes place via monitor depiction and not directly as perception of the actual physical scene. The method is described and demonstrated by means of an ambient surveillance application involving three cameras. The resulting possibility of perception is compared to the case of using two cameras, quantifying the added value of additional camera as to surveillance.
keywords	Perception; possibility; ambient intelligence; surveillance.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_007
id	ecaade2013_007
authors	Canavezzi de Abreu, Sandro
year	2013
title	Permeability Regimes between Man and Interactive Spaces
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 449-457
doi	https://doi.org/10.52842/conf.ecaade.2013.1.449
wos	WOS:000340635300047
summary	In this paper we will present the permeability regimes: concepts conceived to contribute with the understanding of the new roles and necessary skills for the architect and designer to design performative and interactive spaces. This contribution, as will be shown here, is based on theoretical and empirical bases that will address a specific context: the methods for introducing and making tangible the relation between information, human and space for architecture students. Therefore, we will describe the dynamics of an interactive installation developed by undergraduate students, relating it to the permeability regimes.
keywords	Digitalization; interface; mapping; hibridization; permeability.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_198
id	caadria2013_198
authors	Chee Zong Jie and Patrick Janssen
year	2013
title	Exploration of Urban Street Patterns – Multi-Criteria Evolutionary Optimisation Using Axial Line Analysis
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 695-704
doi	https://doi.org/10.52842/conf.caadria.2013.695
wos	WOS:000351496100068
summary	In urban design, researchers have developed techniques to automate both the generation and evaluation of urban street patterns. In most cases, these approaches are investigated in isolation from one another. Recently, a number of researchers have attempted to couple these approaches, in order to enable larger numbers of street patterns to be generated and evaluated in an iterative loop. However, to date, the possibility of fully automating the generative-evaluative loop using optimisation algorithms has not been explored. This research proposes an explorative design method in which urban street patterns can be optimised for multiple conflicting performance criteria. The optimisation process uses evolutionary algorithms to evolve populations of design variants by iteratively applying three key procedures: development, evaluation, and feedback. For development, a generative technique is proposed for constructing street patterns. For evaluation, various performance measures are used, including in particular Space Syntax based Axial Line analysis. For feedback, a Pareto-ranking algorithm is used that ranks street patterns according to multiple criteria. The proposed method is demonstrated using an abstract scenario in which orthogonal street patterns are evolved for a small urban area.
keywords	Axial line analysis, Generative modelling, Evolutionary algorithms, Decision chain encoding, Urban street patterns
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2013_001
id	caadria2013_001
authors	Doelling, Max C. and Ben Jastram
year	2013
title	Daylight Prototypes: From Simulation Data to Four-Dimensional Artefact-Physical Metrics Models in Sustainable Design Education
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 159-168
doi	https://doi.org/10.52842/conf.caadria.2013.159
wos	WOS:000351496100016
summary	The increasing use of building performance simulation in architectural design enriches digital models and derived prototyping geometries with performance data that makes them analytically powerful artefacts serving sustainable design. In our class “Parametric Design”, students perform concurrent thermal and daylight optimization during the architectural ideation process, employing digital simulation tools, and also utilize rapid prototyping techniques to produce process artefacts and whole-building analysis models with climate-based day-light metrics physically embedded. Simulation metrics are merged with prototyping geometries to be output on a colour-capable Zprinter; the resultant hybrid artefacts simultaneously allow three-dimensional formal as well as whole-year daylight performance evaluation, rendering analysis scope four-dimensional. They embody a specific epistemological type that we compare to other model instances and posit to be an example of multivalent representation, a formal class that aids knowledge accretion in workflows and allows designers to gain a physically reframed understanding of geometry-performance relationships.
keywords	Rapid prototyping, Building performance modelling, Daylight simulation, Physical data models, Design representation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_184
id	ecaade2013_184
authors	Fraguada, Luis; Girot, Christophe and Melsom, James
year	2013
title	Ambient Terrain
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 433-438
doi	https://doi.org/10.52842/conf.ecaade.2013.1.433
wos	WOS:000340635300045
summary	‘Ambient Terrain’ explores the application of large-scale, sensor-based site analysis. The research develops various techniques dealing with the logging, storage, retrieval, analysis, and representation of sensor and image-based data. These techniques could be utilized in concert with traditional site preparation and site information gathering processes, and could arguably serve to reevaluate the site preparation process altogether in a manner which not only focuses on terrestrial data, but also on metrics which are dynamic and multidimensional.The research proposes direct applications for urban space and the built environment, in the modes of site appraisal, design and the generation of new spatial strategies.
keywords	Unmanned Aerial Vehicle; sensor data logging, ambient site analysis, UAV data collection; photogrammetry, stereophotogrammetry.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013_101
id	ecaade2013_101
authors	Fukuda, Tomohiro and Taguchi, Masaharu
year	2013
title	Feature of Users’ Eye Movements during a Distributed and Synchronised VR Meeting using Cloud Computing
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 219-226
doi	https://doi.org/10.52842/conf.ecaade.2013.1.219
wos	WOS:000340635300022
summary	Owing to cloud computing Virtual Reality (cloud-VR), a note PC or tablet with no need for a high spec GPU can be used for sharing a 3D virtual space in a synchronous distributed type design meeting. This research investigates the users’ eye movements and optimization of the GUI of cloud-VR during a distributed and synchronized VR meeting. Firstly, a townscape design support system based on cloud-VR was constructed. Then, a 30-minute experiment was executed with eight subjects who wore an eye-tracking system. In conclusion, it was effective to use the eye-tracking system because meeting participants could discuss while confirming each other’s eye direction in an actual distributed and synchronized VR meeting. In scenes where a reviewer listened to a presenter’s explanation, the tendency to look at VR contents other than operation commands was observed. On the other hand, the tendency to look at operation commands about viewpoints, such as “walk-through” and “jump” to an important viewpoint location, was observed in scenes about which a reviewer argued with a presenter.
keywords	Spatial design; distributed synchronization; cloud computing; cognitive analysis; eye-tracking.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_042
id	caadria2013_042
authors	Kaijima, Sawako; Roland Bouffanais and Karen Willcox
year	2013
title	Computational Fluid Dynamics for Architectural Design
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 169-178
doi	https://doi.org/10.52842/conf.caadria.2013.169
wos	WOS:000351496100017
summary	Computational Fluid Dynamics (CFD) is a cost-effective, well-known technique widely employed in industrial design. While indoor analysis can be achieved via CFD, Wind Tunnel Testing (WTT) is still the prevailing mode of analysis for outdoor studies. WTT is often only performed a few times during the course of a building design/construction cycle and primarily for verification purposes. This paper presents a cross-disciplinary research initiative aiming to make CFD understandable and accessible to the architecture community. Our particular interest is in the incorporation of CFD into the early stages of architectural design. Many critical decisions, including those pertaining to building performance, are made during these stages, and we believe access to wind/airflow information during these stages will help architects make responsible design decisions. As a first step, we designed a passive cooling canopy for a bus stop based on the equatorial climatic conditions of Singapore where wind/airflow was a driving factor for geometry generation. We discuss our strategies for overcoming the two bottlenecks we identified when utilising CFD for this framework: mesh generation and result comprehension/visualisation.
keywords	CFD, Simulation, Visualization, Concept design
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac201310204
id	ijac201310204
authors	Kontovourkis, Odysseas; Marios C. Phocas, George Tryfonos
year	2013
title	Prototyping of an Adaptive Structure based on Physical Conditions
source	International Journal of Architectural Computing vol. 11 - no. 2, 205-226
summary	Latest advances in digital architectural design enable applications of computation and fabrication strategies for the development of adaptive mechanisms. Adaptive design processes, influenced by environmental and human related conditions, are only developed partially with regard to the design, fabrication, and multi-objective performance based context. The current paper proposes an adaptive design process that investigates the design of a kinetic structure emphasizing material behaviour, embedded technology and computation. In parallel, it allows design proposals to adapt or transform with regard to geometrical configuration and structural behaviour according to external and internal influences. An adaptive hybrid structure is developed at digital and physical prototype level, where its behaviour is examined in real time under the influence of physical conditions. The development is based on a holistic design approach driven by environmental and human activity related conditions, while focusing on the application of elastic materials and embedded technology.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_132
id	ecaade2013_132
authors	Li, Di; Knight, Michael and Brown, Andre
year	2013
title	A Parametric Recreation of Traditional Chinese Architecture
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 697-703
doi	https://doi.org/10.52842/conf.ecaade.2013.2.697
wos	WOS:000340643600072
summary	This paper presents the current state of progress investigating the possibility of modelling traditional Chinese architecture using parametrics based on the two rule books. This builds on the work of producing systematic analysis on both rule books and contributing knowledge from extant buildings. The case study target is the floor plan described in Ying Zao Fa Shi. Discussion and future works are suggested at the end.
keywords	Parametric modelling, traditional Chinese architecture, Ying Zao Fa Shi, Kung-ch’eng tso-fa tse-le, floor plan.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_075
id	ecaade2013_075
authors	Mohammed-Amin, Rozhen K.; von Mammen, Sebastian and Boyd, Jeffrey E.
year	2013
title	ARCS Architectural Chameleon Skin
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 467-475
doi	https://doi.org/10.52842/conf.ecaade.2013.1.467
wos	WOS:000340635300049
summary	Traditionally, interactivity in architecture has been suppressed by its materiality. Building structures that can transform and change themselves have been the dream of many architects for centuries. With the continuous advancements in technology and the paradigm shift from mechanics to electronics, this dream is becoming reality. Today, it is possible to have building facades that can visually animate themselves, change their appearance, or even interact with their surroundings. In this paper, we introduce Architectural Chameleon Skin (ARCS), an installation that has the ability to transform static, motionless architectural surfaces into interactive and engaging skins. Swarm algorithms drive the interactivity and responsiveness of this “virtual skin”. In particular, the virtual skin responds to colour, movements, and distance of surrounding objects. We provide a comprehensive description and analysis of the ARCS installation.
keywords	Interactive architecture; responsive facade; swarm-based projection; virtual skin; interactive installation.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2013_180
id	ecaade2013_180
authors	Mueller, Volker and Strobbe, Tiemen
year	2013
title	Cloud-Based Design Analysis and Optimization Framework
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 185-194
doi	https://doi.org/10.52842/conf.ecaade.2013.2.185
wos	WOS:000340643600018
summary	Integration of analysis into early design phases in support of improved building performance has become increasingly important. It is considered a required response to demands on contemporary building design to meet environmental concerns. The goal is to assist designers in their decision making throughout the design of a building but with growing focus on the earlier phases in design during which design changes consume less effort than similar changes would in later design phases or during construction and occupation.Multi-disciplinary optimization has the potential of providing design teams with information about the potential trade-offs between various goals, some of which may be in conflict with each other. A commonly used class of optimization algorithms is the class of genetic algorithms which mimic the evolutionary process. For effective parallelization of the cascading processes occurring in the application of genetic algorithms in multi-disciplinary optimization we propose a cloud implementation and describe its architecture designed to handle the cascading tasks as efficiently as possible.
keywords	Cloud computing; design analysis; optimization; generative design; building performance.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2013_164
id	ecaade2013_164
authors	Nicknam, Mahsa; Bernal, Marcelo and Haymaker, John
year	2013
title	A Case Study in Teaching Construction of Building Design Spaces
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 595-604
doi	https://doi.org/10.52842/conf.ecaade.2013.2.595
wos	WOS:000340643600061
summary	Until recently, design teams were constrained by tools and schedule to only be able to generate a few alternatives, and analyze these from just a few perspectives. The rapid emergence of performance-based design, analysis, and optimization tools gives design teams the ability to construct and analyze far larger design spaces more quickly. This creates new opportunities and challenges in the ways we teach and design. Students and professionals now need to learn to formulate and execute design spaces in efficient and effective ways. This paper describes curriculum that was taught in a course “8803 Multidisciplinary Analysis and Optimization” taught by the authors at Schools of Architecture and Building Construction at Georgia Tech in spring 2013. We approach design as a multidisciplinary design space formulation and search process that seeks maximum value. To explore design spaces, student designers need to execute several iterative processes of problem formulation, generate alternative, analyze them, visualize trade space, and address decision-making. The paper first describes students design space exploration experiences, and concludes with our observations of the current challenges and opportunities.
keywords	Design space exploration; teaching; multidisciplinary; optimization; analysis.
series	eCAADe
email
last changed	2022/06/07 07:58

For more results click below: