Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 612

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_230
id	caadria2013_230
authors	Gün, Onur Y.
year	2013
title	The Executed and the Observed in Sketches: Visual and Computational Processing for Explorative Drawings
doi	https://doi.org/10.52842/conf.caadria.2013.801
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 801-810
wos	WOS:000351496100083
summary	Drawing is expressing. The mind’s eye works with the drawing to materialize ideas via transforming them into visual abstractions. The genuine supremacy of drawing emerges from its potential to evoke, not from its ability to represent. Computers are harbingers of unprecedented and enriching drawing environments. Yet they also introduce ambivalences since they suppress drafter’s bodily and perceptual engagement with drawings. This paper aims to delineate the similarities and differences between hand drawing and (via-computer) algorithmic drawing for design. The goal is to discuss the altering role of eyes and hands in long-contrasted virtual and material environments of drawing. The outlined comparisons of algorithmic and hand sketching should encourage research for blending digital and analogue modes of sketching.
keywords	Drawing, Computation, Sketch, Algorithmic, Design, Studio, Visual, Calculation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2013_096
id	ecaade2013_096
authors	Achten, Henri
year	2013
title	Buildings with an Attitude
doi	https://doi.org/10.52842/conf.ecaade.2013.1.477
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 477-485
wos	WOS:000340635300050
summary	In order to achieve interactive architecture it is necessary to consider more than the technological components of sensors, controllers, and actuators. The interaction can be focused to different interaction activities: instructing, conversing, manipulating, and exploring (we propose to call this the interaction view). Additionally, the purpose of the building may range from performing, sustaining, servicing, symbolising, to entertaining (we propose to call this the world view). Combined, the interaction view and world view establish 20 different attitudes, which are flavours of behaviour for the interactive building. Through attitudes interaction profiles can be established and criteria derived for the design of interactive buildings.
keywords	Interactive architecture; design theory; Human-Computer Interaction; augmented reality; mixed reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_069
id	ecaade2013_069
authors	Araneda, Claudio
year	2013
title	The Jacobs´ Urban Lineage Revisited
doi	https://doi.org/10.52842/conf.ecaade.2013.2.355
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 355-363
wos	WOS:000340643600036
summary	Since the almost simultaneous publication of Kevin Lynch and Jane Jacobs´ seminal and pioneer urban manifestos, the discipline has been increasingly permeated by what could be rightly called the phenomenological impulse. While sharing methodological principles, however, they represent two very distinct approaches to the study of urban matters, a distinction rooted on their chosen object of study. The drawing of this distinction constitutes this research´s point of departure. Its fundamental aim is to help further the development of what we characterize as the Jacobs´s lineage of urban thought. To this end, the paper outlines methodological rudiments for the development of a methodological tool that would allow the beginning of a systematic study of the patterns of people´s presence and absence in urban space (streets). We call it Urban Polaroid. This work is part of a government funded (fondecyt 11110450) project.
keywords	Urban phenomenon; phenomenology; Urban Polaroid; space syntax; Jane Jacobs.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_068
id	ecaade2013_068
authors	Attia, Shady and Andersen, Marilyne
year	2013
title	Measuring the Usability, Efficiency and Effectiveness of CAAD Tools and Applications
doi	https://doi.org/10.52842/conf.ecaade.2013.1.147
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 147-155
wos	WOS:000340635300014
summary	Computer Aided Architectural Design (CAAD) decisions and judgments have been at the heart of architectural design practice. Despite the increasing popularity of computer aided design applications, measuring the decision making of designers empirically remains elusive. Past research claiming usefulness of the CAD has relied largely on anecdotal or case studies that are vulnerable to bias. The study reviews results of prior investigations. The relatively few laboratory experiments report hardly any empirical results regarding the measurement of CAD decision making. The study provides an overview of the literature of existing measurement methods that have been used in psychology and neuroscience to assess individual variations in design making, and highlight these different measurement methods’ strengths and weaknesses. We conclude with a comparative evaluation of the different measures and provide suggestions regarding their constructive use in building realistic theories of designer’s decision making measurement.
keywords	Measurement; usability; efficiency; effectiveness; CAAD.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_003
id	ecaade2013_003
authors	Attia, Shady
year	2013
title	Achieving Informed Decision-Making using Building Performance Simulation
doi	https://doi.org/10.52842/conf.ecaade.2013.1.021
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-30
wos	WOS:000340635300001
summary	Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to assess the effect of ZEBO and other building performance simulation (BPS) tools on three specific outcomes: (i) knowledge and satisfaction when using simulation for NZEB design; (ii) users’ decision-making attitudes and patterns, and (iii) performance robustness based on an energy analysis. The paper utilizes three design case studies comprising a framework to test the use of BPS tools. The paper provides results that shed light on the effectiveness of sensitivity analysis as an approach for informing the design decisions of NZEBs.
keywords	Decision support; early stage; design; simulation; architects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_207
id	ecaade2013_207
authors	Bielik, Martin; Schneider, Sven; Geddert, Florian and Donath, Dirk
year	2013
title	Addis Building Configurator
doi	https://doi.org/10.52842/conf.ecaade.2013.1.109
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 109-116
wos	WOS:000340635300010
summary	The paper presents ongoing applied research on the development of a computational design tool addressing planning deficiencies in the city of Addis Ababa, Ethiopia. Because of increasing population pressure and a lack of planning resources, Addis Ababa is clearly in need of new efficient planning solutions. The tool proposed utilizes and combines different generative design methods in order to increase the efficiency of planning and construction processes. The paper discusses design goals and the implementation strategy involved.
keywords	Design tool; evolutionary optimization; generative system; developing countries.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
wos	WOS:000340635300055
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_137
id	ecaade2013_137
authors	Camporeale, Patricia
year	2013
title	Genetic Algorithms Applied to Urban Growth Optimization
doi	https://doi.org/10.52842/conf.ecaade.2013.2.227
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 227-236
wos	WOS:000340643600022
summary	This work is a research on the application of genetic algorithms (GA) to urban growth taking into account the optimization of solar envelope and sunlight in open spaces.It was considered a typical block of a Spanish grid, which is the most common subdivision of the urban land in towns situated in Argentina. Two models are compared, one in which the growth has no more limitations than building codes. The other one, in which the growth incorporates the solar radiation as a desirable parameter.This way of parameterizing configures a bottom-up method of urban growth. No top-down decisions intervenes in the growth process.This tool proves to be useful at early stages of urban planning when decisions—which will influence along the development of the city for a long time—are taken.
keywords	Genetic algorithms; solar envelope.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_061
id	ecaade2013_061
authors	Ciftcioglu, Ozer and Bittermann, Michael S.
year	2013
title	Fusion of Perceptions in Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2013.2.335
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 335-344
wos	WOS:000340643600034
summary	A method for fusion of perceptions is presented. It is based on probabilistic treatment of perception, where perception quantifies the chance an unbiased observer sees an environmental object, and the associated probability can be interpreted as degree of awareness for the object. The approach uniquely accounts for the fact that final realization or remembrance of a scene in the brain may be absent or elusive, so that it is subject to probabilistic considerations. For objects that are to be perceived from multiple viewpoints, such as a sculpture in a museum, or a building in its urban context, the probabilistic approach uniquely defines the fusion of perceptions. This is accomplished by carrying out the probabilistic union of events. The computation is presented together with its geometric implications, which become rather intricate for multiple observers, whereas the computation is straight forward. The method is exemplified for two applications in architectural design at different scales, namely interior and urban design, indicating the generic nature as well as the large application potential of the method.
keywords	Perception; vision modeling; architectural design; evolutionary search.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_216
id	ecaade2013_216
authors	Coutinho, Filipe; Mateus, Luis; Duarte, José P.; Ferreira, Victor and Kruger, Mário
year	2013
title	From Point Cloud to Shape Grammar to Grammatical Transformations
doi	https://doi.org/10.52842/conf.ecaade.2013.2.655
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 655-663
wos	WOS:000340643600068
summary	This paper describes a generative design approach integrating real building data in the process of developing a shape grammar. The goal is to assess to which extent it is feasible the use of a reverse engineering procedure to acquire actual building data and what kind of impact it may have on the development of a shape grammar.The paper describes the use of Terrestrial Laser Scanning (TLS) techniques to acquire information on the São Vicente de Fora church, then the use of such information to develop the corresponding shape grammar, and finally the comparison of this grammar with the grammar of Alberti’s treatise, to determine the grammatical transformations that occurred between the two grammars.
keywords	Alberti, shape grammar, shape recognition, design automation, transformation in design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_125
id	ecaade2013_125
authors	Di Mascio, Danilo
year	2013
title	Understanding and Managing the Constructive Characteristics of Vernacular Architecture
doi	https://doi.org/10.52842/conf.ecaade.2013.2.435
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 435-444
wos	WOS:000340643600044
summary	In this paper a methodology will be presented to investigate and document the constructive characteristics of two raw earth houses: artifacts that belong to the vernacular architecture. The comprehension, analysis and documentation of these architectures presents several problems mainly linked to the impossibility of using a predefined method, because the difficulties relating to each artifact and its characteristics, to particular geographic, cultural and social situations, are unique. To understand and document the constructive features it was decided to realize a three-dimensional digital reconstruction of the two artifacts, using 3D modeling software. Subsequently several graphic works have been elaborated (technological breakdown, sheets with detailed information about the materials, used constructive techniques, etc), useful in managing a recovery or maintenance project.
keywords	Vernacular architecture; raw earth dwelling; 3D modeling; digital reconstruction; knowledge management.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
wos	WOS:000340643600049
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2013_118
id	cf2013_118
authors	Dritsas, Stylianos and Mark Goulthorpe
year	2013
title	An Automated Robotic Manufacturing Process: For the Thermoplastic Panel Building Technology
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 118-129.
summary	This paper presents the design-computation digital fabrication research for a thermoplastic panel technology for housing applications; a high-performance, low-cost building product based on parametric design methodology, glass fiber reinforced composite materials, and numerically controlled robotic fabrication processes. We present a highly integrated schematic design to production workflow, and discuss the potential and challenges of robotic prototyping and fabrication.
keywords	Digital Fabrication, Architectural Robotics, Computer Aided Manufacturing, Building Composites, Thermoplastic Manufacturing
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_011
id	ecaade2013_011
authors	Dritsas, Stylianos; Kalvo, Raul and Sevtsuk, Andres
year	2013
title	Packing Optimization for Digital Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2013.1.655
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 655-664
wos	WOS:000340635300068
summary	We present a design-computation method of design-to-production automation and optimization in digital fabrication; an algorithmic process minimizing material use, reducing fabrication time and improving production costs of complex architectural form. Our system compacts structural elements of variable dimensions within fixed-size sheets of stock material, revisiting a classical challenge known as the two-dimensional bin-packing problem. We demonstrate improvements in performance using our heuristic metric, an approach with potential for a wider range of architectural and engineering design-built digital fabrication applications, and discuss the challenges of constructing free-form design efficiently using operational research methodologies.
keywords	Design computation; digital fabrication; automation; optimization.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_213
id	ecaade2013_213
authors	Ebertshäuser, Sebastian and von Both, Petra
year	2013
title	ifcModelCheck
doi	https://doi.org/10.52842/conf.ecaade.2013.2.525
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 525-534
wos	WOS:000340643600053
summary	On behalf of the BBR (German Federal Office for Building and Regional Planning) the development of an Industry Foundation Classes (IFC) based inspection tool was accomplished as application on an underlying work-in-progress development framework. By providing a machine-based checking process the tool ModelCheck was rolled out to meet demands emerged during pilot projecting. Thus it is capable of processing automated compliance checks on quality criteria for the authorities, e.g. documentation guidelines of BBR regarding building and real estate documentation or building information modeling (BIM) quality criteria formed for the Humboldt-Forum project – a BIM pilot-project managed by BBR. ModelCheck supports checks on IFC models - formal against schemes and logical inspection with regards to alpha-numeric content by using xml-based configurable rules.
keywords	BIM; quality assurance; rule-based model checking; collaboration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2013_414
id	sigradi2013_414
authors	Economou, Athanassios
year	2013
title	f(xn): Explicit and Recursive Definitions of Architectural Typology
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 211 - 216
summary	The notion of a generative description of architectural typology is discussed. Two different approaches are identified and contrasted in terms of their expressive power in design. The building type of the courthouse is selected to showcase and test the approach. One case study is briefly presented to pictorially illustrate the findings.
keywords	Computation; Typology; Shape grammars; Courthouse design; Variation
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2013_192
id	ecaade2013_192
authors	Erdine, Elif
year	2013
title	Biomimetic Strategies in Tower Design
doi	https://doi.org/10.52842/conf.ecaade.2013.1.559
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 559-568
wos	WOS:000340635300058
summary	The paper argues that the tower needs to respond to its environment by changing from a closed building typology towards a heterogeneous, differentiated open system that can adapt to the changing conditions within and around it. This argument is supported by focusing on the analogies and principles of specific biological examples in order to propose computationally-generated self-organizing systems. The goal of analyzing these models is to integrate their structural and geometrical characteristics with the aim of overcoming high lateral loading conditions in towers, as well as elaborating on the existence of multi-functionality and integration throughout the subsystems of the tower. A series of computational models which abstract the biological properties and articulate them with a generative approach through the use of agent-based systems are implemented according to designated evaluation criteria.
keywords	Tower; biomimetics; integration; differentiation; generative algorithms.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_027
id	ecaade2013_027
authors	Etman, Omar; Tolba, Osama and Ezzeldin, Sherif
year	2013
title	Double-Skin Façades in Egypt between Parametric and Climatic Approaches
doi	https://doi.org/10.52842/conf.ecaade.2013.1.459
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 459-465
wos	WOS:000340635300048
summary	Daylight is a crucial element for indoor environment quality. Office buildings commonly use fully glazed façades to reflect a luxurious appearance and to maximize natural light at the expenses of high energy consumption due to cooling/heating. Double-skin façades are one of the solutions that improve the building efficiency while maintaining good natural lighting. This paper studies the impact of various perforated outer skins for non-sealed double-skin facades on light quality in prototypical office space in Egypt using parametric design. A traditional solution for light such as the Mashrabiya is taken as an inspiration for this study to generate different forms of perforated screens. The cases were analysed using light simulation tool and sorted by a genetic algorithm to show best 30 solutions offered by the design criteria. A methodology to achieve these objectives was suggested in this paper to reach better light quality in indoor spaces.
keywords	Double-skin façades; parametric design; mashrabiya; genetic algorithms; illumination.
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: