Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 610

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013r_008
id	ecaade2013r_008
authors	Gargaro, Silvia; Fioravanti, Stefano
year	2013
title	Traditions based on context. How context ontologies can help archaeological sites.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 105-114
summary	Nowadays ICT tools are part of the cultural tradition of designers and over time have replaced pencil and paper in design development. The application programs for design are many and for different purposes, but the role and importance of Context often are underestimated. For new tradition, it needs “Context Knowledge Model” based on ontologies for the management of buildings and preservation and enhancement of cultural heritage with technological innovation. Context modeling gives the opportunity to address the management of pre-existing building in a conscious way. The interoperability of data and knowledge of Context is important to analyze the quality of building process. This is based on standard concepts of the project for the recovery and restoration of the buildings starting from knowledge of context. The goal of this research is to exploit information technology to advance and define knowledge of context monitoring, management and maintenance of historic buildings. The representation of context is important to understand physical, social, economic and normative Context in which the building was placed. The process used to analyze Context entities were Ontologies. This theoretical model will be applied to underground archaeological Roman sites, to implement semantic levels in IFC and BIM for building design.
keywords	Archaeological sites, Collaborative design, Context, Ontology, Design Process
email
last changed	2013/10/07 19:08

_id	sigradi2013_238
id	sigradi2013_238
authors	Lima, Fernando; Vinícius Morais; Frederico Braida; Raiane Duque
year	2013
title	Protótipo Virtual a partir da Plataforma BIM: Uma Base Digital de Dados para Estudos Simulativos de Cenários Ambientais e Mapeamento de Infra-estrutura [Virtual Prototype from the BIM platform: A digital Database for Environmental Simulation Studies and Infrastructure Mapping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 297 - 301
summary	In this article is presented some results of the studies and data obtained in the undergraduates’ research project linked to the Architecture and Urbanism curse of the Federal University of Juiz de Fora (UFJF), in which a digital evaluative approach of environmental performance of buildings in the campus is pursued. In this paper is reported the unfolding of this research project that aims to develop a virtual prototype in Building Information Modelling platform of a campus construction, and its application in environmental simulation studies as well as the management of the building´s information as-built.
keywords	Virtual Prototype; Building Information Modeling; Simulation Studies
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	sigradi2013_138
id	sigradi2013_138
authors	Dezen-Kempter, Eloisa
year	2013
title	Diálogos Digitais: Integração entre Dados Documentais em Sistemas de Informação Baseados no Modelo para Conservação do Patrimônio Arquitetônico [Digital Dialogues: Integration of Documentary Data in Model-Based Information Systems for the conservation of the architectural heritage]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 293 - 296
summary	The architectural documentation plays a key role in the preservation of built heritage, as both support decision making in intervention projects, restoration and rehabilitation, such as the actions of preventive conservation. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. The aim of this research is to develop the integration of quantitative data (smart objects, performance data) and qualitative (photographs and historical documents) in model-based information, such as BIM, to be used in surveying, planning and control of interventions in historic buildings.
keywords	BIM; Architectural Conservation databases; Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_386
id	sigradi2013_386
authors	Keshani, Smruti; Matthew Swarts
year	2013
title	Virtualization of Medication Delivery in Intensive Care Unit Layouts to Analyze Impact on Nurse Behavior
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 624 - 628
summary	This research design aims to understand medication delivery behavior under different spatial configurations through the virtualization of Intensive Care Unit (ICU) environments. Architectural visualization using virtual reality is used to demonstrate capabilities in capturing experiential data. Three different Intensive Care Unit floor plans were modeled and presented in 3D virtual environments. Tasks were developed to simulate nurses’ activities during medication delivery to be analyzed for variables thought to affect nurse efficiency, nurse effectiveness, and satisfaction.
keywords	3D Virtual environment; Medication delivery; Space syntax; Hospital design
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia13_093
id	acadia13_093
authors	Konis, Kyle
year	2013
title	Wiring to the Sky
doi	https://doi.org/10.52842/conf.acadia.2013.093
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 93-100
summary	As architectural design methodologies focus increasingly on the production of dynamic form, the means to actuate these forms, the input that fuels parametric processes, analytical form-generating techniques and responsive controls is of primary concern. In the virtual test beds where systems are developed, inputs are often ad-hoc, based on crude assumptions of the environment, or disconnected from the physical environment entirely.Inverting a technique originally developed to illuminate virtual objects with light captured from real (physical) environments, this project explores image-based lighting as a means of detailed environmental light sensing. The objective of the project is to demonstrate the application of High Dynamic Range (HDR) image data acquired continuously in the physical world as signal input to inform, actuate and evaluate responsive solar control and daylighting systems. As a proof of concept, a virtual hemispherical dome consisting of 145 apertures is controlled to respond in real time to continuous image-based measurements of sky luminance, seeking a defined set of daylighting and solar control objectives. The paper concludes by discussing the implications of incorporating real-world environmental data in the development of dynamic form.
keywords	complex systems, image-based lighting, environmental adaptation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2013r_019
id	ecaade2013r_019
authors	Portugal, Vasco
year	2013
title	Knowledge-based methodology for architectural robotics fabrication. Real time impact assessment through a process flow analysis software
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 229-236
summary	The main goal of the project is to generate a framework for a knowledge-based-methodology (KBM) within a parametric software. This is accomplished through a combination of the design software and robot simulation with real-time assessment based on a process-flow-diagram (PFD) structure that compiles the main environmental parameters of the manufacture process. The intention is to create a methodology to directly report the impact of the manufacture of a specific design, from the materials embodied energy to the energy consumption of each step. This framework provides valuable information which may monitor the developer towards alterations to increase the CAD/CAM performance. In the context of this paper, this methodology was applied in the conceptual design and manufacture of a housing structural insulated panel prototype using parametric design software and robotic equipment. The purpose is to generate a quasi-automated design process linked with real-time analysis and assessment of the fabrication process, offering real time environmental and cost analysis of a panelized structure house manufacture logic. The suggested methodology outputs information to compare and optimize the manufacture outline, and supports the screening and assortment of appropriate tool paths or combination of fabrication tools based on environmental/cost data, user-specified requirements and context characteristics.
keywords	CAD/CAM; Parametric design; Robotics in Architecture; Process flow diagrams
email
last changed	2013/10/07 19:08

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
wos	WOS:000340635300027
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.497
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_255
id	ecaade2013_255
authors	Stavrakantonaki, Marina
year	2013
title	Daylight Performance Simulations and 3D Modeling in BIM and non-BIM Tools
doi	https://doi.org/10.52842/conf.ecaade.2013.2.535
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 535-542
summary	The fusion between building assessment and design can lead to better informed design decisions. Performance oriented design is better supported through the use of interoperable file formats for data exchange between BIM and non-BIM tools. At the same time, the parameters that influence the calculation during a performative assessment are no longer a purely engineering problem, since 3D modeling is of primary importance in defining the numerical output. The role of the designer along with the selection of the tools becomes all more relevant in this direction. A framework is presented hereby, which can be used for the selection between different BIM tools for daylight assessment. An insight is also given on the major parameters that can affect the outcome and on the obstacles that were experienced in four case-studies in relation to data exchange and information flow.
wos	WOS:000340643600054
keywords	Performance simulations; parameters; interoperability; daylight.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2014_001
id	ecaade2014_001
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2014.1
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 632 p.
summary	This is the second volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The second volume of the proceedings contains 65 papers grouped under nine sub-themes (Generative Design- Parametric Modelling, Material, Collaboration and Participation, VR, Spatial Analysis, Shape, Form and Geometry 2, BIM, Design Tool 2 and Smart and Responsive Design).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	sigradi2014_192
id	sigradi2014_192
authors	Angulo, Antonieta H.; Guillermo P. Vasquez de Velasco
year	2014
title	Immersive Simulation in Instructional Design Studios
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 236-240
summary	The paper describes the implementation of “immersive simulation studios” at Ball State University and their impact on architectural design education. This implementation is part of our on-going research efforts aimed to expand conventionally available digital design tools by including state-of-the-art virtual reality (VR) technology in design studios. Two consecutive immersive simulation studios were held during the academic year 2013-2014; we tested teaching/learning methodologies for effectively using the VR simulation to support the students in the design of architectural spaces. The results make reference to the learning outcomes from these implementations and the level of satisfaction of students using the tool.
keywords	Architectural Education; Design Studios; Virtual Reality; Immersive Simulation; Head-Mounted Display
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_135
id	sigradi2013_135
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva
year	2013
title	Identificação de Geometrias Implícitas na Arquitetura a Partir de Realidade Aumentada [Alignment Identification of Implicit Geometries in Architecture from Augmented Reality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 44 - 48
summary	For the initial stages of architectural training one of the strategies traditionally used is to study design cases. This exercise can help in the comprehension of implicit geometries and design processes. The use of the golden ratio, for example, is recurrent in the history of architecture. However, adequate instruments are necessary for this kind of statement. This paper demonstrates the use of Augmented Reality with this goal: virtual elements are viewed overlaying the architecture or its representation, configuring a “digital proportion measurer”. The comprehension of known architectural practices assists in structuring methods and constructing repertoires for architectural design.
keywords	Architecture analysis; Geometry; Augmented reality; Digital proportion measurer
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_056
id	ecaade2013_056
authors	Fioravanti, Antonio; Avincola, Eolo and Novembri, Gabriele
year	2013
title	Even ‘Clouds’ Can Burn
doi	https://doi.org/10.52842/conf.ecaade.2013.2.029
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 29-37
summary	Architecture, nowadays, is an even more demanding activity in which complexity is the keyword: complex forms, complex functions and complex structures require sophisticated facilities and components, for example, ‘The Cloud’ of D. and M. Fuksas in Rome. These complexities can give rise to numerous risks, among which fire is frequently a central problem. The fire safety norms do not involve an approach integrated with other instruments or building model (BIM), but provide a list of information and constraints. These codes are now shifting away from a prescriptive-based towards a performance-based method due to recent progress in fire safety engineering. Following this approach, a case study simulation of a multi-purpose centre was carried out in Tivoli, near Rome. This simulation allowed greater freedom in architectural composition, a lower risk to people, a larger number of material and building components used and higher safety standards to be achieved. The model is based on the FDS (Fire Dynamics Simulator) language, a simulation code for low-speed flows, focused on smoke, particle and heat transport by fire.
wos	WOS:000340643600002
keywords	Architectural design; computational fluid-dynamics; fire propagation; fire safety; smoke propagation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
doi	https://doi.org/10.52842/conf.caadria.2013.407
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
wos	WOS:000351496100040
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	acadia13_087
id	acadia13_087
authors	Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J.; Haberl, Jeff S.; Yan, Wei
year	2013
title	Visualization of Building Energy Performance in Building Information Models
doi	https://doi.org/10.52842/conf.acadia.2013.087
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 87-92
summary	This paper presents the results of research and development of Building Energy Simulation (BES) visualization methods. In this effort the authors used Building Information Modeling (BIM) Authoring Tools’ Application Programming Interface (API) to visualize BES results in BIM. We also used an external database to store and manage the object-based simulation results from a BES tool. Based on these methods, we created a prototype: Building Energy Performance Visualization (BEPV), which translates information from the result database to the Energy Performance Indicator (EPI) parameter in BIM. Using the prototype, when BIM models are created for building design, the building energy performance can be expressed visually as color-coding on the BIM, allowing users to see energy flows directly. The developed prototype lets architects use BIM as a common user interface for building design and performance visualization, and may improve their designs in early stages.
keywords	building information model, information visualization, interdisciplinary design, performance based design, simulation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

For more results click below: