Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_240
id	caadria2013_240
authors	Fok, Wendy W.
year	2013
title	3 Scales of Repurposed Disposability – Diversion of Construction, Renovation and Demolition (CRD)
doi	https://doi.org/10.52842/conf.caadria.2013.811
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 811-820
summary	Project managers and construction contractors have long recognized the importance of reducing waste and salvaging high value construction and demolition materials such as copper and other metals. Contractors are usually careful about the quantity of materials ordered, how materials are used and how to carefully deconstruct valuable materials. In most cases however, materials that are more difficult to separate and that are worth less per unit weight are still going to landfill, even when they are present in large quantities. This represents an inefficient use of natural resources and uses up landfill capacity unnecessarily. Unfortunately, some contractors do not realize that there are new opportunities for waste minimization, while others are reluctant to implement environmental practices because they believe these practices will increase their project costs. Most contractors are concerned about the cost of the labour that is needed to deconstruct materials for reuse or recycling. However, it has been shown that effective waste management during CRD projects not only helps protect the environment, but can also generate significant economic savings. Various projects from within our practice and within our academic curriculum will be brought into the attention of this paper. Specifics of modularity, form/fit/analysis, fabrication, and off-site production, will be demonstrated within the larger discussion through the focus onto three case studies.
wos	WOS:000351496100074
keywords	Construction alternatives, Waste management, Offsite production, Fabrication, Form/Fit/Analysis, Modularity
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia20_688
id	acadia20_688
authors	del Campo, Matias; Carlson, Alexandra; Manninger, Sandra
year	2020
title	3D Graph Convolutional Neural Networks in Architecture Design
doi	https://doi.org/10.52842/conf.acadia.2020.1.688
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 688-696.
summary	The nature of the architectural design process can be described along the lines of the following representational devices: the plan and the model. Plans can be considered one of the oldest methods to represent spatial and aesthetic information in an abstract, 2D space. However, to be used in the design process of 3D architectural solutions, these representations are inherently limited by the loss of rich information that occurs when compressing the three-dimensional world into a two-dimensional representation. During the first Digital Turn (Carpo 2013), the sheer amount and availability of models increased dramatically, as it became viable to create vast amounts of model variations to explore project alternatives among a much larger range of different physical and creative dimensions. 3D models show how the design object appears in real life, and can include a wider array of object information that is more easily understandable by nonexperts, as exemplified in techniques such as building information modeling and parametric modeling. Therefore, the ground condition of this paper considers that the inherent nature of architectural design and sensibility lies in the negotiation of 3D space coupled with the organization of voids and spatial components resulting in spatial sequences based on programmatic relationships, resulting in an assemblage (DeLanda 2016). These conditions constitute objects representing a material culture (the built environment) embedded in a symbolic and aesthetic culture (DeLanda 2016) that is created by the designer and captures their sensibilities.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
doi	https://doi.org/10.52842/conf.acadia.2013.137
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2022_74
id	caadria2022_74
authors	Mazza, Domenico, Kocaturk, Tuba and Kaljevic, Sofija
year	2022
title	Geelong Digital Outdoor Museum (GDOM) - Photogrammetry as the Surface for a Portable Museum
doi	https://doi.org/10.52842/conf.caadria.2022.1.677
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 677-686
summary	This paper presents the development and evaluation of the Geelong Digital Outdoor Museum (GDOM) prototype accessible at https://gdom.mindlab.cloud. GDOM is a portable museum‚our novel adaptation of the distributed museum model (Stuedahl & Lowe, 2013) which uses mobile devices to present museum collections attached to physical sites. Our prototype defines a way for intangible heritage associated with tangible landscapes to be accessible via personal digital devices using 360 3D scanned digital replicas of physical landscapes (photogrammetric digital models). Our work aligns with efforts set out in the UN Sustainable Development Goal 11 (SDG 11) to safeguard cultural and natural heritage, by openly disseminating the heritage of physical sites seamlessly through the landscape. Using a research by design methodology we delivered our prototype as a modular web-based platform that leveraged the Matterport digital model platform. We qualitatively evaluated the prototype's usability and future development opportunities with 32 front-end users and 13 potential stakeholders. We received a wide gamut of responses that included: users feeling empowered by the greater accessibility, users finding a welcome common ground with comparable physical experiences, and users and potential stakeholders seeing the potential to re-create physical world experiences with modifications to the digital model along with on-site activation. Our potential stakeholders suggested ways in which GDOM could be integrated into the arts, education, and tourism to widen its utility and applicability. In future we see design potential in breaking out of the static presentation of the digital model and expanding our portable museum experience to work on-site as a complement to the remote experience. However, we recognise the way in which on-site activation integrate into users' typical activities can be tangential (McGookin et al., 2019) and this would necessitate further investigation into how to best integrate the experience on-site.
keywords	Cultural Heritage, Intangible Heritage, Digital Heritage, Web Platform, 3D Scanning, Photogrammetry, Digital model, Portable Museum, Distributed Museum, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_340
id	acadia20_340
authors	Soana, Valentina; Stedman, Harvey; Darekar, Durgesh; M. Pawar, Vijay; Stuart-Smith, Robert
year	2020
title	ELAbot
doi	https://doi.org/10.52842/conf.acadia.2020.1.340
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 340-349.
summary	This paper presents the design, control system, and elastic behavior of ELAbot: a robotic bending active textile hybrid (BATH) structure that can self-form and transform. In BATH structures, equilibrium emerges from interaction between tensile (form active) and elastically bent (bending active) elements (Ahlquist and Menges 2013; Lienhard et al. 2012). The integration of a BATH structure with a robotic actuation system that controls global deformations enables the structure to self-deploy and achieve multiple three-dimensional states. Continuous elastic material actuation is embedded within an adaptive cyber-physical network, creating a novel robotic architectural system capable of behaving autonomously. State-of-the-art BATH research demonstrates their structural efficiency, aesthetic qualities, and potential for use in innovative architectural structures (Suzuki and Knippers 2018). Due to the lack of appropriate motor-control strategies that exert dynamic loading deformations safely over time, research in this field has focused predominantly on static structures. Given the complexity of controlling the material behavior of nonlinear kinetic elastic systems at an architectural scale, this research focuses on the development of a cyber-physical design framework where physical elastic behavior is integrated into a computational design process, allowing the control of large deformations. This enables the system to respond to conditions that could be difficult to predict in advance and to adapt to multiple circumstances. Within this framework, control values are computed through continuous negotiation between exteroceptive and interoceptive information, and user/designer interaction.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia13_379
id	acadia13_379
authors	Tamke, Martin; Stasiuk, David; Ramsgard Thomsen, Mette
year	2013
title	The Rise – Material Behaviour in Generative Design
doi	https://doi.org/10.52842/conf.acadia.2013.379
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 379-388
summary	The research-based installation, The Rise, is led by the concept of a growing architecture able to sense and dynamically adapt to its environment as it grows into form while continuously reacting to its own material performance and behavioural constraints. This process is enabled through the careful integration of digital simulation techniques with multi-hierarchical generative design approaches. Aggregations of variably sized bundles of rattan core multiply, bend, branch and recombine into a distributed assembly that manifests an alternative to traditional structural systems. The hybrid approach links a material system with simulation and the iterative generation of geometry through a process of calibration at different stages of design. The project leverages emerging computational strategies for growth in a model for an architectural practice that engages the complexity and interdependencies that characterise a contemporary design practice.
keywords	complex systems, material behaviour, simulation, generative design, growth patterns, environmental aware design systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
doi	https://doi.org/10.52842/conf.acadia.2013.109
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	acadia20_114p
id	acadia20_114p
authors	Zivkovic, Sasa; Havener, Brian; Battaglia, Christopher
year	2020
title	Log Knot
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 114-119.
summary	Log Knot, developed by the Robotic Construction Laboratory (RCL) at Cornell University, is a robotically fabricated architectural installation that establishes a method for variable compound timber curvature creation utilizing both regular and irregular roundwood geometries. Moreover, the project develops methods for minimal formwork assembly and moment force optimization of customized mortise and tenon joints. Following the logic of a figure-8 knot, the project consists of an infinite loop of roundwood, curving three-dimensionally along its length. There are a variety of techniques to generate single curvature in wood structures – such as steam bending (Wright et al., 2013) or glue lamination (Issa and Kmeid, 2005) – but only a few techniques to generate complex curvature from raw material within a single wooden structural element exist. To construct complex curvature, the research team developed a simple method that can easily be replicated. First, the log is compartmentalized, establishing a series of discrete parts. Second, the parts are reconfigured into a complex curvature “whole” by carefully manipulating the assembly angles and joints between the logs. Timber components reconfigured in such a manner can either follow planar curvature profiles or spatial compound curvature profiles. Based on knowledge gained from the initial joinery tests, the research team developed a custom tri-fold mortise and tenon joint, which is self-supportive during assembly and able to resist bending in multiple directions. Using the tri-fold mortise and tenon joint, a number of full-scale prototypes were created to test the structural capacity of the overall assembly. Various structural optimization protocols are deployed in the Log Knot project. While the global knot form is derived from spatial considerations – albeit within the structurally sound framework of a closed-loop knot structure – the project is structurally optimized at a local level, closely calibrating structural cross-sections, joinery details, and joint rotation in relation to prevailing load conditions.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	caadria2013_123
id	caadria2013_123
authors	Erhan, Halil I.; David Botta, Andy T. Huang and Robert F. Woodbury
year	2013
title	Peripheral Tools to Support Collaboration: Probing to Design Collaboration Through Role-Playing
doi	https://doi.org/10.52842/conf.caadria.2013.241
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 241-250
summary	Peripheral devices like smart phones offer an opportunity to lower the barrier to spontaneous collection and sharing of information during distributed collaboration. We have completed development of guidelines and a framework that focuses on peripheral devices in collaboration. In order to explore the design space generated by our principles, we conducted a role-playing experiment about commissioning a building, in which an “on-site” team and a “design” team were expected to find and resolve discrepancies between requirements, design documents, and the actual site. The teams were given Styrofoam panels to act as pretend smart peripherals to invoke play and help probe the design space. We found that “reflection on action” (debriefing and subsequent brainstorming) was fruitful for ideation and theorem building about interaction, but “reflection in action” failed. Yet, reflection in action, particularly with such probes, is important to capture the “mechanics of collaboration”. Therefore, we are considering adapting improvisational theatre to our study of distributed collaboration.
wos	WOS:000351496100024
keywords	Collaborative design, Design support tool, Interactive media, Role-playing, Extended cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_101
id	ecaade2013_101
authors	Fukuda, Tomohiro and Taguchi, Masaharu
year	2013
title	Feature of Users’ Eye Movements during a Distributed and Synchronised VR Meeting using Cloud Computing
doi	https://doi.org/10.52842/conf.ecaade.2013.1.219
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 219-226
summary	Owing to cloud computing Virtual Reality (cloud-VR), a note PC or tablet with no need for a high spec GPU can be used for sharing a 3D virtual space in a synchronous distributed type design meeting. This research investigates the users’ eye movements and optimization of the GUI of cloud-VR during a distributed and synchronized VR meeting. Firstly, a townscape design support system based on cloud-VR was constructed. Then, a 30-minute experiment was executed with eight subjects who wore an eye-tracking system. In conclusion, it was effective to use the eye-tracking system because meeting participants could discuss while confirming each other’s eye direction in an actual distributed and synchronized VR meeting. In scenes where a reviewer listened to a presenter’s explanation, the tendency to look at VR contents other than operation commands was observed. On the other hand, the tendency to look at operation commands about viewpoints, such as “walk-through” and “jump” to an important viewpoint location, was observed in scenes about which a reviewer argued with a presenter.
wos	WOS:000340635300022
keywords	Spatial design; distributed synchronization; cloud computing; cognitive analysis; eye-tracking.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013r_018
id	ecaade2013r_018
authors	Goyal, Akshay
year	2013
title	Field condition and the robotic urban landscapes
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 217-228
summary	The paper explores the concept of the ‘field condition’ in recent urban discourse and its implication with respect to emerging technologies in the domains of robotics and AI. The author argues that the notion of ‘field condition’ as one of ‘loosely bound aggregates characterized by porosity and local interconnectivity defined not by overarching geometrical schemas but by intricate local connections’1, has inherent limitations in its contemporary manifestation. The paper then discusses the discourse of the field theory in architecture & urbanism in context with recent developments in swarm robotics, modular self reconfiguring robotic systems and distributed intelligence. Recent design proposals that explore the idea of the city informed by such technologies are also analyzed. The author then argues for a ‘Robotic Urban Landscape’ that builds on the notion of the field as a possibility in the near future. In such a theoretical construct the city consists of a field of ‘nomadic’ mobile technological artifacts that respond to a complex set of parameters and act as a collective whole. The ‘robotic field condition’ in this respect has both physical and virtual dimensions, is both machinic and biological, and has fuzzy binary condition, effectively dematerializing its identity as part of the larger whole. Such fields of mini robots, which collectively are able to perform complex task systems, get intrinsically linked to the city fabric and result in a new urban ecology. The impact on the urban condition as a result of these ‘robotic fields’ of loosely bound mobile artificial constructs that respond in the mathematical matrix of urban ecology and socio economic parameters, is also discussed. Lastly the author suggests a provocative likelihood of a ‘singularity’ moment in light of these developments and the need to relook at contemporary architectural discourse
keywords	Field theory, robotics, artificial intelligence, robotic ecology, emerging technology, emergent urbanism
email
last changed	2013/10/07 19:08

_id	ecaade2013_034
id	ecaade2013_034
authors	Kocaturk, Tuba and Kiviniemi, Arto
year	2013
title	Challenges of Integrating BIM in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2013.2.465
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 465-473
summary	This paper provides a critical overview of some of the fundamental issues regarding the adoption and integration of BIM – both as a method and as a technology – in Architectural education. It aims to establish a common ground for the rationale behind such integration and reflects on the past and present state of the cultural, intellectual, professional and technological context of Architecture. The paper will introduce the core issues to be considered in order to succeed in this challenging and transformational process. It will also introduce a framework for a gradual and progressive adoption of BIM and integrated design in the architectural curriculum.
wos	WOS:000340643600047
keywords	Architectural education; BIM and integrated design; distributed cognition; integrated design studio.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia13_199
id	acadia13_199
authors	Meyboom, AnnaLisa; Reeves, Dave
year	2013
title	Stigmergic Space
doi	https://doi.org/10.52842/conf.acadia.2013.200
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 200-206
summary	This paper presents a multi-agent approach to space planning. Using the algorithm as a primary design tool, it posits to model an active site of programmable collective intelligence—one that is able to inform its own development internally. The mechanisms of self-organization from ants, termites, slime molds and other social organisms are examined and adapted to solve spatial adjacencies amongst elements of a given programmatic brief. Spatial organization becomes the emergent product of a competitive ecology. The task of space planning, one that is typically carried out by a singular high-level decision-maker (the architect, is approached through the distributed decision-making of low-level collective intelligence. This approach facilitates the design of a problem with high levels of complexity and competing requirements.
keywords	agent-based, collective intelligence, parametric, stigmergy, cybernetic ecology
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2014.761
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2013_353
id	sigradi2013_353
authors	Orciuoli, Affonso
year	2013
title	Conhecimento Global, Aplicações Locais: A Caminho de um Ciberdesign? [Global Knowledge, Local Application: In the Way to a Cyberdesign?]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 600 - 603
summary	This paper examines the work of some authors who have had a major influence in the modern world, establishing a relationship with some aspects that arise in the practice of contemporary creation, including all areas of design, especially those that occur in electronics areas. Argues that the way in which information is stored, distributed and processed - from digital - changes radically the way how to develop human relations in all spheres. The presence of digital is growing.
keywords	Feedback; Open design; Cybernetics; Informatics; Open
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia13_151
id	acadia13_151
authors	Plemenitas, Maj
year	2013
title	Autonomous and Adaptive Cross-Scalar Structures and Systems
doi	https://doi.org/10.52842/conf.acadia.2013.151
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 151-158
summary	Cross-scalar design has vital importance for the future development of adaptive and multi-objective design in architecture, by bridging the gap between often inert structures and their ever-evolving and emerging environmental and social contexts. Internal and external stimulus from users and the environment guide, trigger and inform encoded decisions throught the spectrum of scales. The design of seamlessly embedded correlated networks of heterogeneous performative systems enablingsensoring, processing and actuation provides connectivity and redundancy through the ability to accommodate for synchronized and continuous real time reconfiguration and adaptation.
keywords	complex systems, 10-__ 10_ systems, embedded autonomy of architecture, cross-scalar performative structural ecologies, geo(eco)logical computation, environmental synchronization, distributed control, sensing, actuation and feedback, expanded effective design range, cross scalar design computation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 08:00

_id	sigradi2013_429
id	sigradi2013_429
authors	Sharif, Shani
year	2013
title	Material Cognition: Designer’s Perception of Material in a Creative Design Process
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 23 - 26
summary	The new trends in digital design and fabrication attempt to utilize material information as a generative factor in the design and form exploration processes. An investigation on the designers’ cognitive processes in perceiving materiality in an integrated design process could potentially impact these integrated digital endeavors. As a result, this research explores the role of materiality as an external representation based on two main concepts in cognitive science, situated and distributed cognition.
keywords	Material; Material integrated design; Distributed cognition; Representation
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ijac201310205
id	ijac201310205
authors	Sharif, Shani; T. Russell Gentry, Jeannette Yen, Joseph N. Goodman
year	2013
title	Transformative Solar Panels: A Multidisciplinary Approach
source	International Journal of Architectural Computing vol. 11 - no. 2, 227-246
summary	This paper focuses on the applications of geometrically transformable and expandable structures with deployed "energy production" mode and retracted "wind shedding" mode to replace the fixed photovoltaic (PV) panels and racking systems currently used in buildings rooftop installations. The significance of this expandable geometric system relies on its embedded motion grammar, i.e. rotation and translation transformations, in the system. The research draws inspiration from reconfiguration of compound tree leaves in nature, and addresses issues of redesign and modeling challenges that led to digital fabrication of the prototype. Finally, the research studies the development of a multidisciplinary research from the distributed cognition point of view, and emphasizes on the role of an iterative creation, sharing and reflection method for the development of a common ground for a successful collaboration.
series	journal
last changed	2019/05/24 09:55

For more results click below: