Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 612

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2013_131
id	sigradi2013_131
authors	Moreira Pontes, Mateus
year	2013
title	Sistemas BIM no Ensino de Arquitetura: Uma Investigação do Processo de Ensino de Geometria Descritiva e Desenho Arquitetônico através de Elementos Construtivos Virtuais [BIM Systems in Architecture Teaching: Research on the Process of Teaching Descriptive Geometry and Architectural Design through Virtual Constructive Elements]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 569 - 571
summary	This article discusses the current conditions for learning basic knowledge of architectural drawing and descriptive geometry by incorporating geometric modeling software and modeling building components, aimed at developing a significant learning and objective skills improvement for the practice of architecture design.
keywords	Descriptive geometry; Architectural representation; BIM
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2013_108
id	ecaade2013_108
authors	Zarzycki, Andrzej
year	2013
title	Considering Physicality in Digital Models
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 425-434
doi	https://doi.org/10.52842/conf.ecaade.2013.2.425
wos	WOS:000340643600043
summary	This paper discusses the integration of physical and digital models in the context of building technology teaching. It showcases projects that explore the design possibilities of a chosen structural system with the use of parametric and behaviour-based computational modelling. It uses detailed mock-ups as vehicles to study, optimize, and evaluate the design as well as to provide feedback for student learning and the direction in which future designers may engage computational design. Finally, it investigates digital-to-physical design translations, the importance of which becomes more and more critical in the context of the current, computer-intensive architectural education and professional practice.
keywords	BIM; building information modelling; parametric construction details; construction assemblies.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2013_305
id	sigradi2013_305
authors	Echaíz Bielitz, Bárbara; Carla Ponzano Quintanar
year	2013
title	Physical Computing Toydesign [Juguetes Interactivos por Medio de Arduino para Niños con Discapacidad Motriz]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 484 - 488
summary	This research project explores the Arduino potentialities, as a performer and mediator between individuals and their environment. Our goal is to generate spaces to modify that environment through an interface that dialogues with stimuli and actions.Our interest is to connect vulnerable individuals to possible acts of appropriation that is, being able to perform a symbolic ownership of their environments. For doing that, we see the opportunity of using Arduino within the context of differential pedagogy for children with special needs. All this, considering the evident deficiencies of that kind of educational facilities, particularly regarding children with motor disabilities daily activities.
keywords	Physical computing; Arduino; Early education and development; Motor disabilities; Interactive toys
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2013_288
id	ecaade2013_288
authors	Folcher, Viviane; Zreik, Khaldoun; Ben Rajeb, Samia and Leclercq, Pierre
year	2013
title	Innovative Learning for Collaborative Design in Ergonomics
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 605-613
doi	https://doi.org/10.52842/conf.ecaade.2013.2.605
wos	WOS:000340643600062
summary	The proposed article deals with introducing collaborative architectural design into the training of ergonomists at the Master 2 level. The collaborative design workshop aims to confront ergonomists with the difficulties any design project involves, and which challenge architects, designers, engineers and so on: collaboration between people with different skills and different expertise; powerful time constraints; need for their work to converge; working together and/or at a distance; sharing documents; decision-making, etc. The article will present a short review of work carried out in the domains of architecture and design, and of the contribution of ergonomics within architectural projects. We shall then present the workshop’s educational aims, and give details of the way it functioned. Finally, observation results will be presented and discussed.
keywords	Collaborative design; architecture; ergonomics; training workshop.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_028
id	ecaade2013_028
authors	Fricker, Pia; Girot, Christophe and Munkel, Georg
year	2013
title	How to Teach ‘New Tools’ in Landscape Architecture in the Digital Overload
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 545-553
doi	https://doi.org/10.52842/conf.ecaade.2013.2.545
wos	WOS:000340643600055
summary	The central theme of the paper is the introduction of hands-on tools showing the integration of information technology within a postgraduate study program (MAS LA) for landscape architects. What has already become a part of the discourse in the field of architecture – generic design – is now also finding more resonance in the context of large-scale landscape architectural design. If one studies the educational backgrounds of landscape architects, however, they often do not match the same standard as those of architects. A solid background in the area of innovative use of information technology, especially computer-assisted design and CAD/CAM construction is only at a preliminary state at most universities. The critical arguments in the choice of the selected medium and the building up of a continuous digital chain stand here in the forefront. The aim is not to improve the quality of the landscape design based on the variety of the applied tools, but rather through the sensible use of the said. Reflections as well as questions of method and theory stand at the forefront of our efforts.
keywords	Design tool development; computational design research and teaching; new design concepts and strategies; parametric and evolutionary design.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2013_28
id	sigradi2013_28
authors	González Böhme, Luis Felipe; Cristián Calvo Barentin; Mauro Chiarella
year	2013
title	Métodos Computacionales en Arquitectura: La Formación de Arquitectos con Competencia en CyT [Computational Methods in Architecture: The Education of Architects with Competence in S&T]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 524 - 528
summary	Tomorrow’s architects will need to deal more confidently and skillfully with scientific and technological innovations in their field, e.g., parametric design, building physics, construction robotics, home automation, etc. Architecture students today must understand how things work and absorb some of the basic principles and techniques involved in their design, construction or operation. Now students need to build back some of that analytical, logical, critical, and analogical thinking that may have atrophied due to a traditional architectural education. Playing with toy construction kits for building automatic control and mobile robot models, does the job without losing the architect´s approach and attitude.
keywords	Architectural education; Construction kits; Educational computing; Active learning; Learning styles
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2013_129
id	ecaade2013_129
authors	Janusz, Jan
year	2013
title	Learning from Parametric Manipulation of Architectural Volume
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 91-100
doi	https://doi.org/10.52842/conf.ecaade.2013.1.091
wos	WOS:000340635300008
summary	This study is concerned with the building thermal performance education in the context of computer application. The project contains the original script coded in Maxscript for use in Autodesk 3ds Max. The tool workflow and functionality focus on the thermal calculations connected with sculpturing manipulation of architectural volume in pre-conception project stages, when detailed project solutions are undefined. The algorithm is based on the manual methods included in the curriculum. The paper also presents a study of software analyzing thermal performance as a justification for the script vision and educational implementation. The script is rather an addition than alternative for existing software, so it does not assume any resignation from more sophisticated products.
keywords	Parametric design; thermal optimization; sustainable design education; Maxscript; energy estimation.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2025_36
id	caadria2025_36
authors	Kepczynska-Walczak, Anetta, Zarzycki, Andrzej and Walczak, Bartosz M.
year	2025
title	Digital Heritage Education Pedagogies In Architectural Curriculum
source	Dagmar Reinhardt, Christiane M. Herr, Anastasia Globa, Jielin Chen, Taro ?Narahara, Nicolas Rogeau (eds.), ARCHITECTURAL INFORMATICS - Proceedings of the 30th CAADRIA Conference, Tokyo, 22-29 March 2025, Volume 1, pp. 419–428
summary	This paper investigates the impact of evolving building documentation methods on architectural education, focusing on historic preservation. It traces the significance of building surveys back to the 16th century when Giorgio Vasari emphasized the importance of measuring and drawing. Digital tools have shifted this paradigm from traditional methods to integrated digital 2D and 3D survey models. The research examines two case studies of historic tombstone surveys from 2013 and 2023, analyzing how students engaged with different technologies and pedagogical approaches. The 2013 study used analog-to-digital methods, allowing students to develop measuring and documentation skills through hands-on experience. The 2023 study employed digital-to-interactive methods, using photogrammetry and mobile applications for 3D modeling. These educational exercises demonstrated varying degrees of creativity and interpretative analysis, reinforcing experiential learning frameworks. Results suggest that while digital tools enhance efficiency and visualization quality, they may also diminish critical inquiry and reflection among students. This study contributes to understanding how technology reshapes architectural education practices, urging the development of curricula that balance technical proficiency with creative and analytical engagement.
keywords	Experiential learning, mobile technologies, digital heritage, photogrammetry, historic preservation
series	CAADRIA
last changed	2025/03/21 12:04

_id	sigradi2014_100
id	sigradi2014_100
authors	Paganini, Ana Livia; Alejandra María de la Paz Bianchi, Adriana Edith Granero
year	2014
title	La Enchinchada Digital: Una Propuesta de Innovación Mediada con Tecnologías para el Enriquecimiento del Tradicional Recurso de Enseñanza de las Disciplinas Proyectuales [Digital “thumbtacking”: A Technology Mediated Innovation Proposal for the Enrichment of this Traditional Teaching Tool of the Design Disciplines]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 209-212
summary	In design courses in Argentina, “enchinchada” (“thumbtacking”) is the name given to the educational tool used for assessment of students’ work. Every student’s assignment is pinned around the classroom for students to enable, students and teachers to join into a formative dialogue thought observation and reflexion. This work presents the potential of IT in relation to the “enchinchada”. It outlines a new use of a digital wall, and recovers and enriches this practice using a free cloud app, Popplet. The experience was carried out at the Universidad de Buenos Aires in 2013 with students of fashion design and textile design.
keywords	Higher Education; Enchinchada; Innovation; Mediated Technology Education; Ubiquity
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2014_252
id	sigradi2014_252
authors	Pina Calafi, Alfredo; Benoit Bossavit, Isabel Sanchez Gil, Aitziber Urtasun, Benoit Bossavit
year	2014
title	Oteiza en movimiento: una herramienta tecnológica para el aprendizaje participativo en el Museo Oteiza [Oteiza in motion a tool for a collaborative learning at the Oteiza museum]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 255-258
summary	This paper presents an interdisciplinary work done at the Museum Oteiza near Pamplona, Spain during 2012 and 2013. The main goal is the use of low cost devices that allows natural interaction, Virtual and Augmented Realities to get the general public closer to the works and concepts of Oteiza through interactive serious games. The most difficult Oteiza’s concepts to understand are those related with the empty space or with time & space. We propose three different activities, shaped as serious game, that use the whole body to interact and play with these concepts. The result is a facility that has been installed at the entrance of the Museum and that can be used for free, before or after a visit to the museum. These activities were presented to 4 experts in Oteiza and the results are discussed. In addition, we gathered more comments after several groups of children tried the application in the museum.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2013_097
id	caadria2013_097
authors	Schnabel, Marc Aurel and Jeremy J. Ham
year	2013
title	A Framework for Social Networked Architectural Education
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 313-322
doi	https://doi.org/10.52842/conf.caadria.2013.313
wos	WOS:000351496100031
summary	Students engage in Social Networks (SN) as a form of interaction with friends and tutors, as news or learning resource, to make their voices heard or to listen to other views and many more. Online SN work in close association with offline SN to form a blended social environment that greatly enables and enhances students’ learning. Some Schools of Architecture have struggled or failed to engage in the potential of SNor their respective University’s online Learning Management Systems (LMS). Despite efforts to facilitate blended learning environments or to engage students in problem-based learning activities architectural education often fails to tap into the rich resources that online social learning environments offers through their collective and social intelligence of its users. This paper proposes a framework for SN architectural education that provides opportunities for linking the academic LMS with private or professional SN such that it enhances the learning experience and deepens the knowledge of the students. The paper proposes ways of utilising SN supported learning environments in other areas of the curriculum and concludes with directions of how this framework can be employed in professional settings.
keywords	Social networks, Social learning, Architectural curriculum
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	sigradi2013_275
id	sigradi2013_275
authors	Valdés, Francisco; Andres Cavieres; Russell Gentry
year	2013
title	A Process-Centric Approach for Teaching Digital Fabrication
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 400 - 404
summary	New generation of fabrication machines, such as 3-D printers, do not use “real” materials nor processes generally used in building construction, and so further exacerbate the disconnect between laboratory-based prototyping and full-scale building construction techniques. This research critically reviews the results of a graduate fabrication course from a process-centric standpoint. Students in the course create specification for fabrication and assembly activities through a diagrammatic language that integrates several types of construction knowledge such as design, material properties, machine constraints, and assembly guidelines. This document presents the foundations of the methodology, and discussed the results based on two criteria: Process Modeling and CAD/CAM workflow.
keywords	Process model; CNC, Fabrication, Parametric modeling, CAM
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_192
id	sigradi2014_192
authors	Angulo, Antonieta H.; Guillermo P. Vasquez de Velasco
year	2014
title	Immersive Simulation in Instructional Design Studios
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 236-240
summary	The paper describes the implementation of “immersive simulation studios” at Ball State University and their impact on architectural design education. This implementation is part of our on-going research efforts aimed to expand conventionally available digital design tools by including state-of-the-art virtual reality (VR) technology in design studios. Two consecutive immersive simulation studios were held during the academic year 2013-2014; we tested teaching/learning methodologies for effectively using the VR simulation to support the students in the design of architectural spaces. The results make reference to the learning outcomes from these implementations and the level of satisfaction of students using the tool.
keywords	Architectural Education; Design Studios; Virtual Reality; Immersive Simulation; Head-Mounted Display
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_267
id	sigradi2013_267
authors	de la Sotta Lazzerini, Paola; Eduardo Hamuy Pinto; Bruno Perelli Soto
year	2013
title	Diseño de Aplicación en Base a Modelo de Evaluación del Proceso de Enseñanza Aprendizaje en El Taller [A Design Studio Course Assessment Model Applied]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 547 - 550
summary	In design studio courses, assessment helps to improve teaching practice and student learning. Output-Mapping model considers a practical working method, applicable to teaching, based on records of students' outcomes. Visualization is a key component; iconographic resources aid understanding and observation of the territory conquered by each participant throughout the course. The next phase of the project addresses the need to manage large amounts of information generated by a statistical model for assessment. Visualization media used so far have proven limited. A new web system may dynamically visualize relationships between students' records more immediately, precisely and in a network.
keywords	Design teaching; Assessment; Visualization
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_184
id	sigradi2013_184
authors	de Sousa Checcucci, Érica; Ana Paula Carvalho Pereira; Arivaldo Leão de Amorim
year	2013
title	Modelagem da Informação da Construção (BIM) no Ensino de Arquitetura [Building Information Modeling (BIM) on Architecture Teaching]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 307 - 311
summary	This paper discusses the experience of the initial phase of introduction of the BIM paradigm in the undergraduate program in Architecture and Urbanism (evening course) of FAUFBA. We started from the premise that BIM should be adopted gradually and integrated with the various subjects of the course, and should be initiated through the disciplines of graphic representation. The proposal for this course is presented and practices are discussed, as they were experienced in the discipline of Computing and Design II, which deals with this paradigm. It was observed that BIM process requires significant changes, as it encountered some initial resistance from the students. However, this approach increases the understanding of building and facilitates the project documentation. Furthermore, the understanding of the scope of the paradigm was crucial to the effective use of the adopted tool.
keywords	Architectural education; Building Information Modeling (BIM); TIC; Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_426
id	sigradi2013_426
authors	Gonçalves, Marly
year	2013
title	O Produto de Joias Representado Pela Ilustração Digital [Digital Illustration of Jewelry - A Teaching Methodology]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 613 - 616
summary	This article will show learning activity developed during the third semester of Graphic Computer discipline, in the Jewelry and Accessories Production Course, from Faculty of Technological Istituto Europeo di Design in Sao Paulo, using the Problem Based Learning methodology. The present theme aims to encourage students in searching for new ways of graphics representation of his projects using 2D digital programs, based on the work done in the previous semester. The main aim is to show the contribution of an exercise in interdisciplinary training for syllabus of the course Production jewelry and accessories.
keywords	Digital illustration; Teaching methodology; Computer graphics
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
wos	WOS:000361384700036
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013r_007
id	ecaade2013r_007
authors	Leitão, António M.
year	2013
title	Teaching computer science for architecture - A proposal
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 95-104
summary	Computers have profoundly changed the way architects work. Computer science is nowadays recognized as one of the fundamental sciences that must be taught in architecture. Unfortunately, computer science is usually taught just like Physics or Probability Theory, without really preparing the students for the tremendous impact that it will have in architecture in the near future. In this paper we analyze that impact and we discuss some of the approaches that are currently being used for teaching computer science in architecture. Our main contribution is a proposal for teaching computer science in architecture using the principles of functional programming and, particularly, higher-order programming, while avoiding being dependent of specific CAD tools. We claim that this approach gives the student the ability to think, design, and explore designs more effectively than using previous approaches. We validate our claims using data from our own teaching experience during the last five years.
keywords	Architecture, Generative Design; Computer Science; Learning
email
last changed	2013/10/07 19:08

For more results click below: