Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 493

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_101
id	ecaade2013_101
authors	Fukuda, Tomohiro and Taguchi, Masaharu
year	2013
title	Feature of Users’ Eye Movements during a Distributed and Synchronised VR Meeting using Cloud Computing
doi	https://doi.org/10.52842/conf.ecaade.2013.1.219
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 219-226
summary	Owing to cloud computing Virtual Reality (cloud-VR), a note PC or tablet with no need for a high spec GPU can be used for sharing a 3D virtual space in a synchronous distributed type design meeting. This research investigates the users’ eye movements and optimization of the GUI of cloud-VR during a distributed and synchronized VR meeting. Firstly, a townscape design support system based on cloud-VR was constructed. Then, a 30-minute experiment was executed with eight subjects who wore an eye-tracking system. In conclusion, it was effective to use the eye-tracking system because meeting participants could discuss while confirming each other’s eye direction in an actual distributed and synchronized VR meeting. In scenes where a reviewer listened to a presenter’s explanation, the tendency to look at VR contents other than operation commands was observed. On the other hand, the tendency to look at operation commands about viewpoints, such as “walk-through” and “jump” to an important viewpoint location, was observed in scenes about which a reviewer argued with a presenter.
wos	WOS:000340635300022
keywords	Spatial design; distributed synchronization; cloud computing; cognitive analysis; eye-tracking.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_220
id	caadria2013_220
authors	Chaszar, André and José Nuno Beirão
year	2013
title	Feature Recognition and Clustering for Urban Modelling – Exploration and Analysis in GIS and CAD
doi	https://doi.org/10.52842/conf.caadria.2013.601
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 601-610
summary	In urban planning exploration and analysis assist the generation, measurement, interpretation and management of the modelled urban environments. This frequently involves categorisation of model elements and identification of element types. Such designation of elements can be achieved through attribution (e.g. ‘tagging’ or ‘layering’) or direct selection by model users. However, for large, complex models the number and arrangement of elements makes these approaches impractical in terms of time/effort and accuracy. This is particularly true of models which include substantial numbers of elements representing existing urban fabric, rather than only newly generated elements (which might be automatically attributed during the generation process). We present methods for identification and categorisation of model elements in models of existing and proposed urban agglomerations. We also suggest how these methods can enable exploration of models, discovery of identities and relationships not otherwise obvious, and acquisition of insights to the models’ structure and contents which are not captured, and may even be obscured, by manual selection or automated pre-attribution.
wos	WOS:000351496100059
keywords	City information modelling, Data mining, Feature recognition, Geometric-content-based-search, Urban typologies
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2013_013
id	cf2013_013
authors	Yu, Rongrong; John Gero, and Ning Gu
year	2013
title	Impact of Using Rule Algorithms on Designers’ Behavior in a Parametric Design Environment: Preliminary Result from a Pilot Study
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 13-22.
summary	This paper presents preliminary results from a pilot protocol study of the cognitive behavior differences of designers in a parametric design environment and a traditional geometry modeling environment. The aim is to explore the impact of the rule algorithm feature in parametric design by comparing designers’ behavior in these two design environments. Three architects participated in the experiment in which each of them was required to complete two design sessions, one in each environment. The protocols are coded using the function-behavior-structure (FBS) coding scheme. Preliminary results show that the overall behavior is not significantly affected by the environment; however, there are significant differences at different design stages in the two design environments.
keywords	parametric design environment, geometry modeling environment, design cognition, designer behavior, protocol analysis
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_062
id	ecaade2013_062
authors	Bittermann, Michael S. and Ciftcioglu, Ozer
year	2013
title	Ambient Surveillance by Probabilistic-Possibilistic Perception
doi	https://doi.org/10.52842/conf.ecaade.2013.2.345
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 345-353
summary	A method for quantifying ambient surveillance is presented, which is based on probabilistic-possibilistic perception. The human surveillance of a scene through observing camera sensed images on a monitor is modeled in three steps. First immersion of the observer is simulated by modeling perception of the scene from the camera locations using probabilistic perception approach. The perceptions are thereafter combined by means of probabilistic union, simulating simultaneous watching of the scene from multiple viewing positions. As third step the combined perceptions are converted to a possibility using triangular possibility density function. The latter step accounts for the fact that surveillance takes place via monitor depiction and not directly as perception of the actual physical scene. The method is described and demonstrated by means of an ambient surveillance application involving three cameras. The resulting possibility of perception is compared to the case of using two cameras, quantifying the added value of additional camera as to surveillance.
wos	WOS:000340643600035
keywords	Perception; possibility; ambient intelligence; surveillance.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia13_071
id	acadia13_071
authors	Burry, Jane; Salim, Flora; Williams, Mani; Anton Nielsen, Stig; Pena de Leon, Alex; Sharaidin, Kamil; Burry, Mark
year	2013
title	Understanding Heat Transfer Performance for Designing Better Façades
doi	https://doi.org/10.52842/conf.acadia.2013.071
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 71-78
summary	This early research focuses on the design of building façades to mediate external and internal thermal conditions. It explores new workflow for accessible feedback into the early design of façade systems. Specifically, this research aims to explore the level of corroboration or the gap between predictions of thermal behavior using digital modeling and simulation, and the empirical measurement of thermal behavior in physical analog models for façade design.
keywords	Tools and Interfaces: façade design, heat transfer, performance-based design, simulation, data visualization.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_285
id	sigradi2013_285
authors	Caldera, Sebastián; Gonzalo Silva; Mauricio Loyola
year	2013
title	Uso de Herramientas Paramétricas de Optimización Evolutiva y Simulación Energética en el Diseño Basado en Performance [Using Evolutionary Optimization and Energy Simulation Tools in Performance-based Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 343 - 347
summary	This article describes three cases of integration of technologies of evolutionary optimization and energy simulation in performance-based design. The aim is to share the details of the process of creation, validation and use of the various techniques and tools, with an emphasis on the mistakes and successes obtained, so that experiences can be useful for non-specialist users interested in working with these methodologies.
keywords	Parametric design; Grasshopper 3D; Ecotect; GECO; Galápagos
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_205
id	sigradi2013_205
authors	Chiarella, Mauro; Luis Felipe González Böhme; Cristian Calvo Barentin
year	2013
title	Robots: Automatización en Diseño y Construcción para la Enseñanza de Arquitectura [Robots: Automation in Design and Manufacturing for Teaching Architecture]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 439 - 443
summary	Industrial robots controlled by parametric design software and visual programming environments are gaining popularity in the research and use of non-conventional construction processes in architecture. Process automation which can be personalized through variable components promises to become an industry standard with similar cost structures to current pre-fabrication industrial processes. In order to incorporate competencies from non-serial variable architectural modular design, an initial teaching initiative (Advanced Architectural Design Studio – USM) was developed in Latin América. The strategy employed is based on incorporating concepts and instruments of Construction & Design Automation for CAD/CAM processes with a Six Axis Robotic Arm (KUKA KR125/2).
keywords	Robotic fabrication; Parametric modeling, Teaching architecture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia20_688
id	acadia20_688
authors	del Campo, Matias; Carlson, Alexandra; Manninger, Sandra
year	2020
title	3D Graph Convolutional Neural Networks in Architecture Design
doi	https://doi.org/10.52842/conf.acadia.2020.1.688
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 688-696.
summary	The nature of the architectural design process can be described along the lines of the following representational devices: the plan and the model. Plans can be considered one of the oldest methods to represent spatial and aesthetic information in an abstract, 2D space. However, to be used in the design process of 3D architectural solutions, these representations are inherently limited by the loss of rich information that occurs when compressing the three-dimensional world into a two-dimensional representation. During the first Digital Turn (Carpo 2013), the sheer amount and availability of models increased dramatically, as it became viable to create vast amounts of model variations to explore project alternatives among a much larger range of different physical and creative dimensions. 3D models show how the design object appears in real life, and can include a wider array of object information that is more easily understandable by nonexperts, as exemplified in techniques such as building information modeling and parametric modeling. Therefore, the ground condition of this paper considers that the inherent nature of architectural design and sensibility lies in the negotiation of 3D space coupled with the organization of voids and spatial components resulting in spatial sequences based on programmatic relationships, resulting in an assemblage (DeLanda 2016). These conditions constitute objects representing a material culture (the built environment) embedded in a symbolic and aesthetic culture (DeLanda 2016) that is created by the designer and captures their sensibilities.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2013_015
id	caadria2013_015
authors	Dritsas, Stylianos and Kang Shua Yeo
year	2013
title	Undrawable Architecture – Digital Workflows for the Conservation of Heritage Buildings and the Discovery of Digital Tectonic
doi	https://doi.org/10.52842/conf.caadria.2013.833
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 833-842
summary	This paper presents a datacentric perspective to historical building conservation using digital media. In particular we explore a workflow based on large volumes digital data acquired via 3D scanning technology, virtual restoration using 3D modelling and physical artefact reconstruction using 3D printing technology. We offer an alternative perspective in contrast to the prevalent approach of reverse engineering or geometric rationalization via parametric design technology; highlight the research and design opportunities as well as the challenges of the approach.
wos	WOS:000351496100086
keywords	Digital conservation, 3D scanning, Rapid prototyping
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_213
id	ecaade2013_213
authors	Ebertshäuser, Sebastian and von Both, Petra
year	2013
title	ifcModelCheck
doi	https://doi.org/10.52842/conf.ecaade.2013.2.525
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 525-534
summary	On behalf of the BBR (German Federal Office for Building and Regional Planning) the development of an Industry Foundation Classes (IFC) based inspection tool was accomplished as application on an underlying work-in-progress development framework. By providing a machine-based checking process the tool ModelCheck was rolled out to meet demands emerged during pilot projecting. Thus it is capable of processing automated compliance checks on quality criteria for the authorities, e.g. documentation guidelines of BBR regarding building and real estate documentation or building information modeling (BIM) quality criteria formed for the Humboldt-Forum project – a BIM pilot-project managed by BBR. ModelCheck supports checks on IFC models - formal against schemes and logical inspection with regards to alpha-numeric content by using xml-based configurable rules.
wos	WOS:000340643600053
keywords	BIM; quality assurance; rule-based model checking; collaboration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_037
id	ecaade2013_037
authors	Georgakopoulou, Sofia; Zünd, Daniel and Schmitt, Gerhard
year	2013
title	The City Biosphere
doi	https://doi.org/10.52842/conf.ecaade.2013.1.255
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 255-264
summary	This paper introduces a new experimental city generation, assembly and development platform, the urban mutations platform. We describe in detail a methodology for modeling urban systems and their dynamics, based on self-organization principles. The urban area is seen as an organism comprised of different “body parts”, the urban subunits. Upon creation of an initial 3D urban environment, it is possible to add to the subunits the so-called mutations, i.e. structural and functional components that can have beneficial or detrimental effects to the future city development. After addition of the mutations we allow the city to reorganize itself and observe possible changes in the urban configuration. These changes can be directly correlated to the added mutations and their urban qualities and allow us to probe the effect that different structural and functional elements have on the dynamic behaviour of the city, when placed at specific locations.
wos	WOS:000340635300026
keywords	Self-organization; mutation; urban qualities; urban grid; urban mutations platform, UMP.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2013_10
id	sigradi2013_10
authors	Gomez, Paula; Matthew Swarts; Pedro Soza; Jonathan Shaw; James MacDaniel; David Moore
year	2013
title	Campus Landscape Information Modeling: Intermediate Scale Model that Embeds Information and Multidisciplinary Knowledge for Landscape Planning
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 61 - 65
summary	Building Information Modeling (BIM) and Geographic Information Systems (GIS), as their names imply, are models of information at different scales that usually appear segregated. Our proposal is to integrate both scales of information in a Campus Information Model (CIM). This paper focuses on the description of this integration in terms of information and knowledge models, from the point of view of landscape design. We emphasize on the description of CLIM, an interactive tabletop we have developed to support collaboration and planning of landscape, which is constructed using models of information and knowledge to perform assessments, including quantitative aspects of effectiveness, efficiency and satisfaction of certain features of the Georgia Tech Campus.
keywords	Campus Information Modeling; Landscape Modeling; Landscape Planning; Knowledge-based Design; Interactive Tabletop
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cf2013_358
id	cf2013_358
authors	Gonzalez-Quintial, Francisco; Antonio Sanchez-Parandiet, and Javier Barrallo
year	2013
title	Freeform Surfaces Adaptation through Developable Surfaces Using Apparent Contours
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 358-367.
summary	Free-form surfaces construction has been limited to the possibilities of graphical and constructive control. In a few years we have seen an important development of control of the form through digital graphic technology, software and hardware that allowed truly spectacular constructions. A significant researching way not only in architecture, but also in engineering even in sculpture, has been the adaptation of free forms through developable surfaces using different systems, many based on differential geometry. Reinterpreting some topics of projective geometry that allows the use of certain CAD software, jumping from the physical to the digital drawing system, has been developed a method allows the adaptation of free forms through developable surfaces using apparent contours that we can draw over these free form surfaces. Trough using them we can trace two types of developable surfaces as cones and cylinders that are touching the surface tangentially to this contours.
keywords	Freeform surfaces, Double curved surfaces, Developable surfaces, Algorithmic approach.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	acadia13_087
id	acadia13_087
authors	Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J.; Haberl, Jeff S.; Yan, Wei
year	2013
title	Visualization of Building Energy Performance in Building Information Models
doi	https://doi.org/10.52842/conf.acadia.2013.087
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 87-92
summary	This paper presents the results of research and development of Building Energy Simulation (BES) visualization methods. In this effort the authors used Building Information Modeling (BIM) Authoring Tools’ Application Programming Interface (API) to visualize BES results in BIM. We also used an external database to store and manage the object-based simulation results from a BES tool. Based on these methods, we created a prototype: Building Energy Performance Visualization (BEPV), which translates information from the result database to the Energy Performance Indicator (EPI) parameter in BIM. Using the prototype, when BIM models are created for building design, the building energy performance can be expressed visually as color-coding on the BIM, allowing users to see energy flows directly. The developed prototype lets architects use BIM as a common user interface for building design and performance visualization, and may improve their designs in early stages.
keywords	building information model, information visualization, interdisciplinary design, performance based design, simulation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2014_150
id	caadria2014_150
authors	Knapp, Chris; Jonathan Neslon and Michael Parsons
year	2014
title	Constructing Atmospheres
doi	https://doi.org/10.52842/conf.caadria.2014.149
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 149–158
summary	This paper documents and critically reflects upon the design, development, fabrication, and implementation of three pavilion projects developed during 2013-14. The core investigation of this work is the production of architectural spaces characterized by a quality of enveloping, diffuse, visual and spatial atmospheres. The principal activity of the research is aimed at refining methods for software-based exploration of formal complexities and the subsequent need to control variability and efficiency in fabrication output, using Grasshopper for Rhino to develop customized definitions particular to each specific project scenario. Linking the projects together are issues of scale, resolution of effect, and intent to move from disparate assemblies of structure and skin toward composite, manifold construction techniques that address multiple concerns (gravity, bracing, affect, etc) with a minimum of assembly. A material palette common to the current vernacular of CNC-based projects such as plywood, plastics, and other sheet materials is utilised. This work is invested in extending the possibilities of the architect and architecture as a discipline, extrapolating the workflow from these successive projects to the speculative impact of the work upon emerging possibilities of architectural construction and craft.
keywords	3d modelling; Digital fabrication; Rhinoceros; Grasshopper; Tessellation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2013_161
id	caadria2013_161
authors	Manferdini, Elena and Anna Maria Manferdini
year	2013
title	Tempera
doi	https://doi.org/10.52842/conf.caadria.2013.883
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 883-892
summary	This paper explores the characteristics of painting developed during the Nineteenth century, and specifically updates the use of matter and brushing techniques invented by a group of painters called “Impressionists”. In that period, impressionist artists began to brush “tempera” on a canvas as a malleable matter able to emphasize an accurate depiction of light in its changing qualities. Thick brush strokes left on the painted surface revealed the master’ gesture and completely changed the way to represent reality. Stimulated by the recent advancements in digital technologies, this paper looks for methodologies able to transfer impressionistic painterly innovation into a contemporary digital 3D environment and investigates how paint behaves when morphing from a photorealistic depiction of Nature to a disfigured one. In particular, reality-based 3D information, first frozen by a laser scanner into a digital geometry, slowly melts into liquid paint on a colour palette. While colours mix, the geometrical matter that constitutes the photorealistic scanned reality and its details disappear into primitive paint clog that are mixed and brushed into new colours and shapes able to create novel atmospheric and chromatic effects.
wos	WOS:000351496100091
keywords	Tempera, Laser scanner, 3D painting effects, Design creativity
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2022_74
id	caadria2022_74
authors	Mazza, Domenico, Kocaturk, Tuba and Kaljevic, Sofija
year	2022
title	Geelong Digital Outdoor Museum (GDOM) - Photogrammetry as the Surface for a Portable Museum
doi	https://doi.org/10.52842/conf.caadria.2022.1.677
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 677-686
summary	This paper presents the development and evaluation of the Geelong Digital Outdoor Museum (GDOM) prototype accessible at https://gdom.mindlab.cloud. GDOM is a portable museum‚our novel adaptation of the distributed museum model (Stuedahl & Lowe, 2013) which uses mobile devices to present museum collections attached to physical sites. Our prototype defines a way for intangible heritage associated with tangible landscapes to be accessible via personal digital devices using 360 3D scanned digital replicas of physical landscapes (photogrammetric digital models). Our work aligns with efforts set out in the UN Sustainable Development Goal 11 (SDG 11) to safeguard cultural and natural heritage, by openly disseminating the heritage of physical sites seamlessly through the landscape. Using a research by design methodology we delivered our prototype as a modular web-based platform that leveraged the Matterport digital model platform. We qualitatively evaluated the prototype's usability and future development opportunities with 32 front-end users and 13 potential stakeholders. We received a wide gamut of responses that included: users feeling empowered by the greater accessibility, users finding a welcome common ground with comparable physical experiences, and users and potential stakeholders seeing the potential to re-create physical world experiences with modifications to the digital model along with on-site activation. Our potential stakeholders suggested ways in which GDOM could be integrated into the arts, education, and tourism to widen its utility and applicability. In future we see design potential in breaking out of the static presentation of the digital model and expanding our portable museum experience to work on-site as a complement to the remote experience. However, we recognise the way in which on-site activation integrate into users' typical activities can be tangential (McGookin et al., 2019) and this would necessitate further investigation into how to best integrate the experience on-site.
keywords	Cultural Heritage, Intangible Heritage, Digital Heritage, Web Platform, 3D Scanning, Photogrammetry, Digital model, Portable Museum, Distributed Museum, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ecaade2013r_019
id	ecaade2013r_019
authors	Portugal, Vasco
year	2013
title	Knowledge-based methodology for architectural robotics fabrication. Real time impact assessment through a process flow analysis software
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 229-236
summary	The main goal of the project is to generate a framework for a knowledge-based-methodology (KBM) within a parametric software. This is accomplished through a combination of the design software and robot simulation with real-time assessment based on a process-flow-diagram (PFD) structure that compiles the main environmental parameters of the manufacture process. The intention is to create a methodology to directly report the impact of the manufacture of a specific design, from the materials embodied energy to the energy consumption of each step. This framework provides valuable information which may monitor the developer towards alterations to increase the CAD/CAM performance. In the context of this paper, this methodology was applied in the conceptual design and manufacture of a housing structural insulated panel prototype using parametric design software and robotic equipment. The purpose is to generate a quasi-automated design process linked with real-time analysis and assessment of the fabrication process, offering real time environmental and cost analysis of a panelized structure house manufacture logic. The suggested methodology outputs information to compare and optimize the manufacture outline, and supports the screening and assortment of appropriate tool paths or combination of fabrication tools based on environmental/cost data, user-specified requirements and context characteristics.
keywords	CAD/CAM; Parametric design; Robotics in Architecture; Process flow diagrams
email
last changed	2013/10/07 19:08

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.497
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2013_400
id	sigradi2013_400
authors	Sanguinetti, Paola
year	2013
title	Performance Testing in Architectural Design: Evolving the Problem-Solving Paradigm for Novice Designers
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 520 - 523
summary	This paper compares two approaches to introduce novice architectural designers to computational tools for performance testing. Focus is placed on parametric design changes to test solutions. The first approach is limited to the design of a shading component. The second approach consists of short exercises using Building Information Modeling to test and analyze discrete decisions. The hurdles in the learning process are discussed, including the role of visualization to evaluate performance. The effectiveness on learning strategies is discussed.
keywords	Design education; BIM; Performance-based design; Novice designer; Design problem-solving
series	SIGRADI
email
last changed	2016/03/10 09:59

For more results click below: