Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2014_252
id	sigradi2014_252
authors	Pina Calafi, Alfredo; Benoit Bossavit, Isabel Sanchez Gil, Aitziber Urtasun, Benoit Bossavit
year	2014
title	Oteiza en movimiento: una herramienta tecnológica para el aprendizaje participativo en el Museo Oteiza [Oteiza in motion a tool for a collaborative learning at the Oteiza museum]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 255-258
summary	This paper presents an interdisciplinary work done at the Museum Oteiza near Pamplona, Spain during 2012 and 2013. The main goal is the use of low cost devices that allows natural interaction, Virtual and Augmented Realities to get the general public closer to the works and concepts of Oteiza through interactive serious games. The most difficult Oteiza’s concepts to understand are those related with the empty space or with time & space. We propose three different activities, shaped as serious game, that use the whole body to interact and play with these concepts. The result is a facility that has been installed at the entrance of the Museum and that can be used for free, before or after a visit to the museum. These activities were presented to 4 experts in Oteiza and the results are discussed. In addition, we gathered more comments after several groups of children tried the application in the museum.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2013_143
id	sigradi2013_143
authors	Veiga, Monica; Adriane Borda; Francisca Michelon; Tatiana Lebedeff
year	2013
title	Atribuição de Acessibilidade à Fotografia através da Restituição e Desconstrução da Tridimensionalidade [Attribution of accessibility to photography through the restitution and deconstruction of three-dimensionality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 449 - 453
summary	This paper describes the experiments that are being developed to support an inclusive or accessible exposition of photographs. Physical three dimensional models are being developed using 3D printing technologies to allow tactile experience. The method being structured for this production is registered. It includes the use of the concept of games seeking to work with the purpose of decomposition of information which is recommended by the inclusive communication literature.
keywords	Tactile mock-up; Accessibility; Visual Impairment; Museum; Assistive technology
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2013_158
id	ecaade2013_158
authors	Cohen, Itai; Turrin, Michela; Heinzelmann, Florian and Welzner, Ivo
year	2013
title	The Human Factor – Introducing Game Mechanics to Computerized Home Automation Systems
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 175-184
doi	https://doi.org/10.52842/conf.ecaade.2013.1.175
wos	WOS:000340635300017
summary	A method of integration of game mechanics and game dynamics into a user interface for a home automation system as means of reducing the inhabitant’s environmental footprint is described and detailed up to the point of proof of concept. In detail, the paper describes the game framework and the method in which the competitive game could be balanced between different dwellings to ensure a fair game. A unique and intuitive method of control via smartphone is described that aims at making the interaction with the device and game more intrusive and friendly. This method is prototyped and tested to the stage of proof of concept.
keywords	Gamification; domotics; user interface; domestic energy reduction; layered reality.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_107
id	ecaade2013_107
authors	de Boissieu, Aurélie; Guéna, François and Lecourtois, Caroline
year	2013
title	Identifying Cognitive Operations of Conception Implied in the Uses of Parametric Modeling in Architectural Design: Toward Pedagogical Tools
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 563-570
doi	https://doi.org/10.52842/conf.ecaade.2013.2.563
wos	WOS:000340643600057
summary	The research presented in this paper aims at identifying the cognitive operations implied in the uses of parametric modeling in architectural conception. The uses of parametric modeling in architectural design remain emergent and marginal. How can we teach these practices? The identification of the main cognitive operations of conception allows us to propose accurate pedagogical objectives. This paper presents: the research methods employed, the results achieved and propositions for pedagogical tools.
keywords	Parametric modeling; architectural conception, CAAD curriculum, architecturology.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2013_108
id	sigradi2013_108
authors	Ghisolfi, Érika; Simone Helena Tanoue Vizioli
year	2013
title	A Linguagem de Programação Aliada ao Desenho na Criação de Jogos Digitais como Instrumento de Arquitetura Patrimonial [The Programming Language Allied with Drawing on the Creation of Digital Games as a Tool of the Architectural Heritage ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 564 - 568
summary	This research studies the use of digital games as a playful tool approach of knowledge in architecture heritage. We emphasize the potential of digital games as a teaching tool and the importance of digital drawing combined with programming language, the means by which the making of the games became possible. The models developed are based on the properties of historical and cultural interest in the city of São Carlos, Brasil.
keywords	Digital games; Programming language; Digital drawing; Heritage education; Playfulness
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia13_391
id	acadia13_391
authors	Abbasy-Asbagh, Ghazal
year	2013
title	[re]folding Muqarnas: A case study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 391-392
doi	https://doi.org/10.52842/conf.acadia.2013.391
summary	This project uses folded surface as a mechanism to make a historically non-structural system, Muqarnas, into one that combines surface and structure.
keywords	structural optimization, folded surface, cultural landscapes, muqarnas, complex geometry
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:54

_id	sigradi2013_215
id	sigradi2013_215
authors	Abdelmohsen, Sherif M.
year	2013
title	Reconfiguring Architectural Space using Generative Design and Digital Fabrication: A Project Based Course
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 391 - 395
summary	This paper discusses a course that addresses the integration between generative design and digital fabrication in the context of reconfiguring architectural space. The objective of the course, offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was to design and fabricate interior design elements to be installed within the department lobby. Students worked in digital and physical environments to develop 8 group projects that featured concepts of shape grammars, L-systems, fractals and cellular automata. The potential of the realized projects is discussed in terms of 3D development of systems, contextual generative design, and pedagogical objectives.
keywords	Contextual generative design; Rule-based systems; Self-organizing systems; Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201310207
id	ijac201310207
authors	Abondano, David
year	2013
title	The Return of Nature as an Operative Model: Decoding of Material Properties as Generative Inputs to the Form-Making Process
source	International Journal of Architectural Computing vol. 11 - no. 2, 267-284
summary	The abandonment of nature as an architectural model and the redefinition of the relationship between form and material were two of the main consequences of industrialization for modern architecture. While nature was replaced by the machine as a model for architecture, industrial production suppressed the craftsman's knowledge of the material and the associated techniques once essential to the form-making process. Thus, the replacement of nature as a model implied that principles once related to natural processes started to be seen as industrial values, i.e., the economy of means stopped being recognized as a quality related to natural form-making processes and became a demand of industrial production. Nowadays, material properties and nature are being reintroduced into architecture with the help of digital technologies; that is, the return of nature though computation. As a result, nature has become an operational model as opposed to the visual or iconic one it used to be; its inner qualities and processes are being decoded in order to inform the form-making process and foster innovative digital ornamentation.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_096
id	ecaade2013_096
authors	Achten, Henri
year	2013
title	Buildings with an Attitude
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 477-485
doi	https://doi.org/10.52842/conf.ecaade.2013.1.477
wos	WOS:000340635300050
summary	In order to achieve interactive architecture it is necessary to consider more than the technological components of sensors, controllers, and actuators. The interaction can be focused to different interaction activities: instructing, conversing, manipulating, and exploring (we propose to call this the interaction view). Additionally, the purpose of the building may range from performing, sustaining, servicing, symbolising, to entertaining (we propose to call this the world view). Combined, the interaction view and world view establish 20 different attitudes, which are flavours of behaviour for the interactive building. Through attitudes interaction profiles can be established and criteria derived for the design of interactive buildings.
keywords	Interactive architecture; design theory; Human-Computer Interaction; augmented reality; mixed reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	acadia13_281
id	acadia13_281
authors	Ahlquist, Sean; Menges, Achim
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 281-292
doi	https://doi.org/10.52842/conf.acadia.2013.281
summary	Material behavior can be defined as the confluence of associative rules, contextual pressures and constraints of materialization. In more general terms, it can be parameterized as topologies, forces and materiality. Forming behavior means resolving the intricate matrix of deterministic and indeterministic factors that comprise and interrelate each subset of these material- nherent conditions. This requires a concise design framework which accumulates the confluent behavior through successive and cyclical exchange of multiple design modes, rather than through a single design environment or set of prescribed procedures. This paper unfolds a sequencing of individual methods as part of a larger design framework, described through the development of a series of complex hybrid- structure material morphologies. The “hybrid” nature reflects the integration of multiple force-active structural concepts within a single continuous material system, devising both self-organized yet highly articulated spatial conditions. This leads primarily to the development of what is termed a “textile hybrid” system: an equilibrium state of tensile surfaces and bending-active meshes. The research described in this paper looks to expose the structure of the textile as an indeterministic design parameter, where its architecture can be manipulated as means for exploring and differentiating behavior. This is done through experimentation with weft-knitting technologies, in which the variability of individual knit logics is instrumentalized for simultaneously articulating and structuring form. Such relationships are shown through an installation constructed at the ggggallery in Copenhagen, Denmark.
keywords	Material Behavior, Spring-based Simulation, CNC Knitting, Form- and Bending-Active, Textile Hybrid Structures.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_297
id	ecaade2013_297
authors	Aish, Robert
year	2013
title	DesignScript: Scalable Tools for Design Computation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 87-95
doi	https://doi.org/10.52842/conf.ecaade.2013.2.087
wos	WOS:000340643600008
summary	Design computation based on data flow graph diagramming is a well-established technique. The intention of DesignScript is to recognise this type of data flow modeling as a form of ‘associative’ programming and to combine this with the more conventional ‘imperative’ form of programming into a single unified computational design application. The use of this application is intended to range from very simple graph based exploratory ‘proto-programming’ as used by novice end-user programmers to multi-disciplinary design optimisation as used by more experienced computational designers.
keywords	Graph; scripting; associative; imperative.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_161
id	acadia13_161
authors	Akbarzadeh; Masoud
year	2013
title	Performative Surfaces: Generating complex geometries using planar flow patterns
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 161-172
doi	https://doi.org/10.52842/conf.acadia.2013.161
summary	This research explains the development process of a design tool that can construct complex surface geometries using only two-dimensional plan drawings. The intention behind this tool is to address certain complex behavior of surface geometries such as hydrological characteristics. This paper briefly explains the historic and mathematic description of surface data structures, according to Cayley, Maxwell and Morse. This is followed by a brief introduction of the surface network/critical graph extraction technique in GIS. Additionally, the algorithm of contour extraction from asimple critical graph to reconstruct a surface is explained. In the final section the lessons learnedfrom the previous sections are used to develop algorithms for a tool which uses only plan drawings to construct complex surfaces. Three algorithms are explained in the final section among which the third one is considered to be the most complete and promising approach. Therefore,some design examples are presented to show the flexibility of the tool. At the end, this paper provides suggestions and discussions to reflect further ideas in order to improve the tool in future.
keywords	Tools and Interfaces, complex surface, drainage patterns, discrete flow diagram, surface networks, critical graph, and surface generation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_112
id	sigradi2013_112
authors	Akemi Omine, Katia; José Neto de Faria; Karine Itao Palos
year	2013
title	Projeto Design Condensado: Definição de ‘Modelo Sociocultural’ para Sistemas de Visualização Dinâmica de Dados que Estimulem a Geração de Novos Conhecimentos sobre a História do Design [Condensed Design Project: The Definition of a ‘Social-cultural Model’ for Dynamic Data Visualization Systems Which StimulateKnowledge Building in Design History]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 143 - 147
summary	The ‘Condensed Design Project’ aims to discuss and reflect on how the definition of an ‘activity inducer’, by describing and characterizing ‘social-cultural models’, can be used in the development of dynamic data visualization systems. The aim is to discuss and try to understand how the profile of the ‘activity inducer’, routines, scenario and context impact the navigation, interaction, research and learning processes in design history. Thus, the knowledge building process is strictly conditioned to the way the relation between the ‘visualization system’ and the ‘activity inducer’ is promoted, considering the technological limitations and the individual’s predisposition.
keywords	Data visualization; Design history; Usage context, Experience; Knowledge
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_337
id	sigradi2013_337
authors	Al-Haddad, Tristan; Keyan Rahimzadeh; Jill Fredrickson
year	2013
title	Concrete Continuum: Concept, Calculus, & Construction Connected Through Parametric Representation
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 230 - 234
summary	This paper outlines a custom-built suite of scripts that automate the processes of reinforced concrete design and is directly linked to the parametric design model of the architect. The workflow creates a design and engineering feedback loop for early phase schematic design. Using this system, the design geometry is generated and then deconstructed into a Finite Element model. The workflow executes a static analysis then calculates rebar size and placement, and finally generates fabrication drawings. This methodology allows architectural intent and engineering analysis to be collapsed into a single non-linear design process.
keywords	Parametric design; Digital fabrication; Reinforced concrete; Production automation; Design feedback proces
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_234
id	sigradi2013_234
authors	Alencar, Viviane; Gabriela Celani
year	2013
title	The Art of Computer Graphics Programming: Translating Pioneer Programs
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 500 - 504
summary	Considering the importance of the use of programming languages for teaching computational design to architects, this paper proposes the translation of computer programs from a pioneer work in this field into a more contemporary programming language. The book The Art of Computer Graphics Programming: A Structured Introduction for Architects and Designers was published in 1987 by William J. Mitchell, Robin Ligget and Thomas Kvan, and remains an important reference for architects. The original Pascal codes in the book were translated into Processing, and made available through an Internet website, along with images and comments, in order to give late Prof. Mitchell’s work the consideration it deserves.
keywords	Processing; Pascal; Computer graphics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2013_021
id	caadria2013_021
authors	Alhadidi, Suleiman
year	2013
title	Generative Design Intervention: Creating a Computational Platform for Sensing Space
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 345-354
doi	https://doi.org/10.52842/conf.caadria.2013.345
wos	WOS:000351496100034
summary	This paper outlines some investigations from a project which utilizes computing and scripting of specific site components, spatio-temporal movement and behavioural patterns to explore how designer might understand people activities and formulate design interventions within public spaces. This research looks at how generative tools can facilitate designers to integrate the large volume of information received by hybrid data collection, and conventional data analysis directly into the design process. Through an examination of sensing urban space, this research proposes a method to track and record people’s movement patterns in order to implement them via generative design tool. To facilitate this, a scripting method is specified; which uses sensors and motion tracking devices to capture the use of a specific public space. This project proposes a methodology for developing designed spaces and optimal pathways generated from real-time data and feedback captured by sensors.
keywords	Real-time computation, Generative design, Sensing space, Design simulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2013_262
id	caadria2013_262
authors	Alston, Mark E.
year	2013
title	Space Emergent Field
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 715-724
doi	https://doi.org/10.52842/conf.caadria.2013.715
wos	WOS:000351496100070
summary	Architecture has always been founded upon ideologies. However could the influence of human interactions create a new perspective for space form evolution? To create a spatial adaptive system, to the influence of culture and behaviour of human being? The output of this spatial system is the determination of optimised values for spatial configurations by biomolecular, self-assembly computation for emergent spatial forms.
keywords	Spatial, Adaptive, Biomolecular computations, Self-assembly
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: