Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_262
id	ecaade2013_262
authors	Rolando, Andrea and D’Uva, Domenico
year	2013
title	Hyperdomes
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 315-324
doi	https://doi.org/10.52842/conf.ecaade.2013.2.315
wos	WOS:000340643600032
summary	The development of new shapes in architecture has deeply influenced the current perception of the built environment. The analysis of the processes behind this evolution is, therefore, of great interest. At least two well known factors, influencing this development, may be pointed out: the great improvement of digital tools and the tendency toward building distinctiveness.In particular, the innovation of digital tools such as parametric modeling is resulting in an overall diffusion of complex shapes, and the phenomenon is also evident in a clear expressionistic search for architectural singularity, that some might consider as a negative effect of globalization trends.Though, if we can consider as a positive result the fact that parameterization allows a deeper control over design factors in terms of reference to cultural, historical and physical context, at the same time such control possibilities are sometimes so stark to be even auto-referential, stepping over site-specific parameterization, to create unusual shapes just for the sake of complexity.The ever-growing diffusion of generative design processes is in fact going to transform niche procedures, frequently limited to temporary decontextualized structures, into an architectural complexification as an end in itself.The hypothesis of this paper is to demonstrate that site-specific parametrization can be considered as a tool able to translate intentions into shape; it is necessary, for this aim, the widening of the meaning of the word singularity.
keywords	Urban environment; distinctiveness; non-standard roofing structures.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_187
id	ecaade2013_187
authors	Tompson, Tim and Haeusler, M. Hank
year	2013
title	Investigating Tools for Multi-Stakeholder Decision Making to Improve the Spatial Performance in Transport Interchanges
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 233-242
doi	https://doi.org/10.52842/conf.ecaade.2013.1.233
wos	WOS:000340635300024
summary	Public transport interchanges often involve several stakeholders for planning and decision-making. As a result complexity leads to inefficient processes, leading to indecision, disruption, or costly delays. Consequently, the paper focuses on the application of tools for navigation and prioritization of opportunities in the need finding, fuzzy-front end, or mystery phase as introduced by Martin (2009). The paper outlines in a case study how a multi-stakeholder platform can progress from complete ambiguity in project definition through to clearly defined and understood projects that have a shared intent across the multi-stakeholder platform. These tools have been applied in a public transport context, by demonstrating the process of integrating digital innovation into various stakeholders through a participatory research process. The paper introduces the research background; discusses the hypothesis; outlines the case study; emphasizes its significance for multi-stakeholder decision-making and discusses the opportunities for the built environment.
keywords	Participatory design; soft-systems methodology; multi-stakeholder; urban planning; transport environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
wos	WOS:000340635300027
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia13_379
id	acadia13_379
authors	Tamke, Martin; Stasiuk, David; Ramsgard Thomsen, Mette
year	2013
title	The Rise – Material Behaviour in Generative Design
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 379-388
doi	https://doi.org/10.52842/conf.acadia.2013.379
summary	The research-based installation, The Rise, is led by the concept of a growing architecture able to sense and dynamically adapt to its environment as it grows into form while continuously reacting to its own material performance and behavioural constraints. This process is enabled through the careful integration of digital simulation techniques with multi-hierarchical generative design approaches. Aggregations of variably sized bundles of rattan core multiply, bend, branch and recombine into a distributed assembly that manifests an alternative to traditional structural systems. The hybrid approach links a material system with simulation and the iterative generation of geometry through a process of calibration at different stages of design. The project leverages emerging computational strategies for growth in a model for an architectural practice that engages the complexity and interdependencies that characterise a contemporary design practice.
keywords	complex systems, material behaviour, simulation, generative design, growth patterns, environmental aware design systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2014_011
id	ecaade2014_011
authors	Marie Davidova
year	2014
title	Ray 2:The Material Performance of Solid Wood Based Screen
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 153-158
doi	https://doi.org/10.52842/conf.ecaade.2014.2.153
wos	WOS:000361385100016
summary	The wood - humidity interaction of solid wood has been tested through generations on Norwegian traditional panelling. This concept has been further explored by Michael Hensel and Steffen Reichert with Achim Menges on plywood and laminates in basic research. Plywood or laminates are better programmable but they are less sustainable due to the use of glue. This research focused on predicting the performance of solid wood in tangential section which is applied to humidity-temperature responsive screen for industrial production. With the method Systems Oriented Design, the research evaluated data from material science, forestry, meteorology, biology, chemistry and the production market. Themethod was introduced by Birger Sevaldson in 2007 with the argument that the changes in our globalized world and the need for sustainability demands an increase of the complexity of the design process. (Sevaldson 2013)Several samples has been tested for its environmental interaction. The data has been integrated in parametric models that tested the overall systems. Based on the simulations, the most suitable concept has been prototyped and measured for its performance. This lead to another sampling of the material whose data are the basis for another prototype. Ray 2 is an environmental responsive screen that is airing the structure in dry weather, while closing up when the humidity level is high, not allowing the moisture inside.
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2013_163
id	caadria2013_163
authors	Parlac, Vera
year	2013
title	Surface Change: Information, Matter and Environment – Surface Change Project
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 935-944
doi	https://doi.org/10.52842/conf.caadria.2013.935
wos	WOS:000351496100096
summary	Over the past decade, there has been an increasing interest in exploring the capacity of built spaces to respond dynamically and adapt to changes in the external and internal environments. Such explorations are technologically and socially motivated, in response to recent technological and cultural developments. Advances in embedded computation, material design, and kinetics on the technological side, and increasing concerns about sustainability, social and urban changes on the cultural side, provide a background for responsive/interactive architectural solutions that have started to emerge. This paper presents an ongoing design research project driven by an interest in adaptive systems in nature and a desire to explore the capacity of built spaces to respond dynamically. The paper underlines architecture’s inseparable link to technology and projects a vision of architecture that, through its capacity to change and adapt, becomes an integrated, responsive, adaptive and productive participant within larger ecologies.
keywords	esponsive architecture, Dynamic environments, Mechatronics, Kinetic material systems, Embedded systems, Shape memory alloy
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2014_144
id	ecaade2014_144
authors	Michail Georgiou, Odysseas Georgiou and Theresa Kwok
year	2014
title	Affordable Complexity - 'God's Eye' - Sukkahville 2013
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 169-177
doi	https://doi.org/10.52842/conf.ecaade.2014.2.169
wos	WOS:000361385100018
summary	The paper presents a novel approach on the design of complex forms by re-formulating the relationships between form, structure, material, fabrication and construction. It is proposed that current design models are supplemented by feedback-enabled frameworks, integrating material properties, fabrication constraints and construction logistics. As such, a series of input parameters based on industry standards, filtered through physical testing and digital simulations, feed a central computational model. The outcome is weighed against a set of objectives towards an optimum design solution which embodies construction logic while ultimately opposing costly inflated ad-hoc solutions. Within the above framework and as part of a broader research conducted at [ARC], this paper illustrates a design methodology implemented at the case study of 'God's Eye', winning entry of Sukkahville 2013 International Design Competition. It is further supported that a high tech, interdisciplinary design process based on efficient material assemblies allows for a complex, yet efficient end result, through low tech affordable construction.
keywords	Material-based design; design process; construction logistics; interdisciplinary design; computational design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
doi	https://doi.org/10.52842/conf.caadria.2013
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2013_294
id	sigradi2013_294
authors	Arenas Alvarez del Castillo, Ubaldo; José Manuel Falcón Meraz
year	2013
title	Hacia la Adaptabilidad en Sistemas Robóticos de Construcción [Towards Adaptability in Robotic Building Systems]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 71 - 75
summary	This article explores the concept of adaptability within the built environment, extending the feedback and inter-communication characteristics of parametric design into construction processes and the material components of contemporary buildings; providing a conceptual and contextual framework, it also describes several strategies explored to achieve such type of communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia20_688
id	acadia20_688
authors	del Campo, Matias; Carlson, Alexandra; Manninger, Sandra
year	2020
title	3D Graph Convolutional Neural Networks in Architecture Design
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 688-696.
doi	https://doi.org/10.52842/conf.acadia.2020.1.688
summary	The nature of the architectural design process can be described along the lines of the following representational devices: the plan and the model. Plans can be considered one of the oldest methods to represent spatial and aesthetic information in an abstract, 2D space. However, to be used in the design process of 3D architectural solutions, these representations are inherently limited by the loss of rich information that occurs when compressing the three-dimensional world into a two-dimensional representation. During the first Digital Turn (Carpo 2013), the sheer amount and availability of models increased dramatically, as it became viable to create vast amounts of model variations to explore project alternatives among a much larger range of different physical and creative dimensions. 3D models show how the design object appears in real life, and can include a wider array of object information that is more easily understandable by nonexperts, as exemplified in techniques such as building information modeling and parametric modeling. Therefore, the ground condition of this paper considers that the inherent nature of architectural design and sensibility lies in the negotiation of 3D space coupled with the organization of voids and spatial components resulting in spatial sequences based on programmatic relationships, resulting in an assemblage (DeLanda 2016). These conditions constitute objects representing a material culture (the built environment) embedded in a symbolic and aesthetic culture (DeLanda 2016) that is created by the designer and captures their sensibilities.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
doi	https://doi.org/10.52842/conf.acadia.2013.137
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2013_151
id	caadria2013_151
authors	Simeone, Davide; Yehuda E. Kalay and Davide Schaumann
year	2013
title	Using Game-Like Narrative to Simulate Human Behaviour in Built Environments
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 199-208
doi	https://doi.org/10.52842/conf.caadria.2013.199
wos	WOS:000351496100020
summary	Predicting future users’ behaviour and their activities in a building is a highly complex task that designers have to face during the design process. Despite its importance, few methods exist that can predict and help evaluate this type of building performance during the design process itself. Simulative approaches are gradually overcoming this shortcoming, but at present their application is limited to the representation of specific occurrences and behavioural performance aspects, such as emergency egress. Based on current developments in the video game industry, our research aims to establish a new approach to human behaviour simulation in built environments, based on a clear and reliable representation of the use processes occurring in a building. At its core is simulation based on the notion of events, defined as active entities on their own, comprised of space, people, and activities. These events entities are structured into collections called narratives, which represent and allow the simulation of the step-by-step performing of activities by users in a built environment.
keywords	Human behaviour simulation, Building-user interaction, Prediction and evaluation, Event model, Game narrative
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia13_319
id	acadia13_319
authors	Mehanna, Ryan
year	2013
title	Resilient Structures Through Machine Learning And Evolution
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 319-326
doi	https://doi.org/10.52842/conf.acadia.2013.319
summary	In the context of the growing usefulness of computation within architecture, structures face the potential for being conceived of as intelligent entities capable of resilient, adaptive behavior.Building on this idea, this work explores the use of machine learning for structures that may learn to autonomously “stand up”. The hypothesis is that a neural network with genetically optimized weights would be capable of teaching lightweight, flexible, and unanchored structures to self-rectify after falling, through their interactions with their environment. The experiment devises a physical and a simulated prototype. The machine-learning algorithm is implemented on the virtual model in a three-dimensional physics environment, and a solution emerges after a number of tests. The learned behavior is transferred to the physical prototype to test its performance in reality. This method succeeds in allowing the physical prototype to stand up. The findings of this process may have useful implications for developing embodied dynamic structures that are enabled with adaptive behavior.
keywords	complex systems, neural networks, genetic algorithms, actuated structures, particle-spring systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2013_180
id	ecaade2013_180
authors	Mueller, Volker and Strobbe, Tiemen
year	2013
title	Cloud-Based Design Analysis and Optimization Framework
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 185-194
doi	https://doi.org/10.52842/conf.ecaade.2013.2.185
wos	WOS:000340643600018
summary	Integration of analysis into early design phases in support of improved building performance has become increasingly important. It is considered a required response to demands on contemporary building design to meet environmental concerns. The goal is to assist designers in their decision making throughout the design of a building but with growing focus on the earlier phases in design during which design changes consume less effort than similar changes would in later design phases or during construction and occupation.Multi-disciplinary optimization has the potential of providing design teams with information about the potential trade-offs between various goals, some of which may be in conflict with each other. A commonly used class of optimization algorithms is the class of genetic algorithms which mimic the evolutionary process. For effective parallelization of the cascading processes occurring in the application of genetic algorithms in multi-disciplinary optimization we propose a cloud implementation and describe its architecture designed to handle the cascading tasks as efficiently as possible.
keywords	Cloud computing; design analysis; optimization; generative design; building performance.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2022_001
id	ecaade2022_001
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design- Volume 2
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, 646 p.
doi	https://doi.org/10.52842/conf.ecaade.2022.2
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
keywords	Proceedings, Front Matter
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2022_000
id	ecaade2022_000
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design - Volume 1
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, 672 p.
doi	https://doi.org/10.52842/conf.ecaade.2022.1
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2013r_009
id	ecaade2013r_009
authors	Orsi, Francesco; Fiorito, Stefano
year	2013
title	Learning from vernacular
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 115-120
summary	By looking at time-tested recurrent design patterns drawn from Portuguese vernacular settlements, the present research tries to address the problem of developing sustainable urban solutions for scattered low density territories throughout Portugal. The research departs from the hypothesis that Portuguese vernacular settlements contain morphological characteristics that can be captured and reused in new designs: this may be particularly useful for rethinking extensive suburban territories’ densification conditions, in order to enhance both their consistency and sustainability. Urban sprawl and uncontrolled space consumption have often hastened the problem of territorial sustainability, that’s the reason why completing, restructuring and enhancing dispersed built environments is of paramount importance in order to foster both cultural and economical sustainability in contemporary Portugal. This project ultimately aims at contributing towards the definition of design procedures and planning tools for the re-urbanization of extensive urban fabrics. One of the major objectives is developing a decision making support tool for generating meaningful and coherent interventions in dispersed urban fabrics which could foster connectivity, integration and quality of life, by doing so this work tries to propose a novel methodology that could prove to be valuable in different contexts, even outside Portugal.
keywords	Generative patterns; Vernacular urbanism; Bottom-up processes; Re-urbanization; Territorial sustainability
email
last changed	2013/10/07 19:08

For more results click below: