Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 587

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
doi	https://doi.org/10.52842/conf.caadria.2014
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ecaade2013_096
id	ecaade2013_096
authors	Achten, Henri
year	2013
title	Buildings with an Attitude
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 477-485
doi	https://doi.org/10.52842/conf.ecaade.2013.1.477
wos	WOS:000340635300050
summary	In order to achieve interactive architecture it is necessary to consider more than the technological components of sensors, controllers, and actuators. The interaction can be focused to different interaction activities: instructing, conversing, manipulating, and exploring (we propose to call this the interaction view). Additionally, the purpose of the building may range from performing, sustaining, servicing, symbolising, to entertaining (we propose to call this the world view). Combined, the interaction view and world view establish 20 different attitudes, which are flavours of behaviour for the interactive building. Through attitudes interaction profiles can be established and criteria derived for the design of interactive buildings.
keywords	Interactive architecture; design theory; Human-Computer Interaction; augmented reality; mixed reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
doi	https://doi.org/10.52842/conf.caadria.2013.407
wos	WOS:000351496100040
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-9-8]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/04/17 13:59

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2013_158
id	ecaade2013_158
authors	Cohen, Itai; Turrin, Michela; Heinzelmann, Florian and Welzner, Ivo
year	2013
title	The Human Factor – Introducing Game Mechanics to Computerized Home Automation Systems
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 175-184
doi	https://doi.org/10.52842/conf.ecaade.2013.1.175
wos	WOS:000340635300017
summary	A method of integration of game mechanics and game dynamics into a user interface for a home automation system as means of reducing the inhabitant’s environmental footprint is described and detailed up to the point of proof of concept. In detail, the paper describes the game framework and the method in which the competitive game could be balanced between different dwellings to ensure a fair game. A unique and intuitive method of control via smartphone is described that aims at making the interaction with the device and game more intrusive and friendly. This method is prototyped and tested to the stage of proof of concept.
keywords	Gamification; domotics; user interface; domestic energy reduction; layered reality.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_009
id	ecaade2013_009
authors	Cutellic, Pierre and Lotte, Fabien
year	2013
title	Augmented Iterations
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 393-401
doi	https://doi.org/10.52842/conf.ecaade.2013.1.393
wos	WOS:000340635300041
summary	The principle of Augmented Iterations is to create shapes of progressively higher complexity, thanks to a fast neuronal selection of shapes among several possible evolving designs. Such a process is made possible by the use of a brain signal known as P300, which appears when a user perceives a rare and relevant stimulus and can be used for intricate pattern recognition and human computation systems. We aim at using this P300 signal to identify the (re)cognition of shapes or designs that a user finds almost instantaneously relevant and noticeable, when exposed to a rapid visual flow of variations of such shapes or designs. Using evolutionary algorithms, the shapes identified as those triggering a P300 in the user’s EEG signals is selected and combined to give rise to geometrical aggregations of a higher complexity. These new shapes replace the previous ones in the rapid flow of variations presented to the user, hence iterating the evolutionary design.
keywords	Neurodesign; generative design; integrated cognition; evolutionary computation.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia14_473
id	acadia14_473
authors	Cutellic, Pierre
year	2014
title	Le Cube d'Après, Integrated Cognition for Iterative and generative Designs.
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 473-478
doi	https://doi.org/10.52842/conf.acadia.2014.473
summary	This paper describes the work in progress of a research on Neurodesign and a previously described process entitled Augmented Iterations [Cutellic and Lotte, 2013]. Within this broader field of research and design explorations, we will focus on describing and comment results obtained in the neuroselection of shapes among a continuously varying flow of visual stimuli. Eventually, these results will lead to the identification of a non-linear and non-convergent potential for the human-based computation of iterative and generative designs.
keywords	Human Computer Interaction, Augmented Iteration, Neurodesign, Generative Design, Integrated Cognition, Evolutionary Computation, Design Computing and Cognition
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	caadria2013_033
id	caadria2013_033
authors	Nguyen, Danny D. and M. Hank Haeusler
year	2013
title	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.caadria.2013.365
wos	WOS:000351496100036
summary	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software The research presented in this paper investigates the need for an equivalent of architectural drawings for urban interaction design in an architectural scale in order to communicate interaction design intentions to design participants and clients through using state of the art computer, gaming and sensor technologies. The paper discusses two projects (a) Blur Building, as a large scale interaction design project executed through an experienced team and (b) presents as student design project coordinated by the researchers as a reference project. Both projects in this paper are discussed and evaluated from an Urban Interaction Design point of view. This paper emphasizes the significance for establishing ‘drawing’ equivalents for urban interaction design, discussing representation of ideas in architectural design; followed by outlining existing methods of interactive design representation, such as storyboards to then introduce current advancements in gaming environments. The following paper introduces a framework for future research projects that will design, deploy and evaluate of prototypes as a communication platform combining physical sensing devices in combination with gaming engines to enable a digital / physical hybrid. This would allow designers and clients to test, evaluate and improve urban interactions in a design phase prior to completing the project.
keywords	Spatial design, Human-computing interfacing, Interactive architecture, Smart environments, Sensor technology
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2013_315
id	sigradi2013_315
authors	Rodriguez, Awilda; Paolo Sanza
year	2013
title	Visualizing the (in)Visible: Mapping Culture and the Forces that Shape the Urban Experience
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 95 - 98
summary	Digital technologies not only have made information accessible but also have exponentially generated new data. The continue growth of urban GIS and pervasive computing is helping us analyze human interactions in unprecedented ways. Yet, when researching urban sites, the students’ task is conventionally limited to the analysis of aggregate spatial data that does not reveal the invisible forces acting upon the site. The limitation of this approach is further evident if students cannot visit the site. This paper explores the role of information visualization to uncover uncommon site forces and to supplement students’ lack of embodiment with far distanced sites.
keywords	Information visualization; Mapping, Urban environments
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ecaade2013_190
id	ecaade2013_190
authors	Schwartz, Mathew
year	2013
title	Collaborative and Human Based Performance Analysis
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.ecaade.2013.2.365
wos	WOS:000340643600037
summary	This research presents methods for simulation and visualization of human factors. This allows for a performance based analysis of buildings from the local human scale to the larger building scale. Technical issues such as computational time and mathematically describing a buildings geometry are discussed. The algorithms presented are integrated in a 3D modeling software commonly used in design and architecture through a plugin.
keywords	Universal design; human analysis; collaboration; education; disability.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_151
id	caadria2013_151
authors	Simeone, Davide; Yehuda E. Kalay and Davide Schaumann
year	2013
title	Using Game-Like Narrative to Simulate Human Behaviour in Built Environments
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 199-208
doi	https://doi.org/10.52842/conf.caadria.2013.199
wos	WOS:000351496100020
summary	Predicting future users’ behaviour and their activities in a building is a highly complex task that designers have to face during the design process. Despite its importance, few methods exist that can predict and help evaluate this type of building performance during the design process itself. Simulative approaches are gradually overcoming this shortcoming, but at present their application is limited to the representation of specific occurrences and behavioural performance aspects, such as emergency egress. Based on current developments in the video game industry, our research aims to establish a new approach to human behaviour simulation in built environments, based on a clear and reliable representation of the use processes occurring in a building. At its core is simulation based on the notion of events, defined as active entities on their own, comprised of space, people, and activities. These events entities are structured into collections called narratives, which represent and allow the simulation of the step-by-step performing of activities by users in a built environment.
keywords	Human behaviour simulation, Building-user interaction, Prediction and evaluation, Event model, Game narrative
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.1
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2013_212
id	sigradi2013_212
authors	Angulo, Antonieta; Guillermo Vásquez de Velasco
year	2013
title	Immersive Simulation of Architectural Spatial Experiences
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 495 - 499
summary	The paper describes our research efforts seeking to assess the potential use of immersive simulation through virtual reality (VR) environments as a tool for aiding the design of architectural spatial experiences. By making use of a fully implemented HMD-based VR Environment in our school at Ball State University we conducted a controlled experiment with novice design students. After the evaluation of results of the experiment we have found evidence of the positive impact of the use of the system in design education. We will further investigate on the best practices to incorporate its pervasive use based on high-impact simplified methods.
keywords	Spatial experience; Immersive simulation; Head mounted display; Virtual reality; Design education
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_135
id	sigradi2013_135
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva
year	2013
title	Identificação de Geometrias Implícitas na Arquitetura a Partir de Realidade Aumentada [Alignment Identification of Implicit Geometries in Architecture from Augmented Reality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 44 - 48
summary	For the initial stages of architectural training one of the strategies traditionally used is to study design cases. This exercise can help in the comprehension of implicit geometries and design processes. The use of the golden ratio, for example, is recurrent in the history of architecture. However, adequate instruments are necessary for this kind of statement. This paper demonstrates the use of Augmented Reality with this goal: virtual elements are viewed overlaying the architecture or its representation, configuring a “digital proportion measurer”. The comprehension of known architectural practices assists in structuring methods and constructing repertoires for architectural design.
keywords	Architecture analysis; Geometry; Augmented reality; Digital proportion measurer
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_342
id	sigradi2013_342
authors	Bruscato, Underléa; Sandro J. Rigo; Cristiano A. Costa; Humberto J. M. Costa
year	2013
title	Visualização de Informações Geográficas no Turismo Ubíquo de Itinerários Culturais [Visualization of Geographic Information of Ubiquitous Tourism in Cultural Routes]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 153 - 157
summary	This paper presents a practical experience developed within the framework of a network of researchers dedicated to develop projects of technology transfer, training and research in the field of innovation, involving virtual reality, augmented reality and advanced interaction. The group develops visualization oriented technologies and aim to socialize the experiences developed. In this sense was created an Electronic Guide to cultural routes in southern Brazil, exploiting the contemporary concept of ubiquitous tourism, in which users access tourism content with mobile devices, using sensitivity to context, semantic web and advanced visualization, thus rescuing the memory and regional architectural heritage.
keywords	Ubiquitous tourism; Mobile computing, Memory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaade2013_193
id	ecaade2013_193
authors	Duddumpudi, Krishna; Moloney, Jules and Moleta, Tane
year	2013
title	Whispering Walls
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 507-516
doi	https://doi.org/10.52842/conf.ecaade.2013.1.507
wos	WOS:000340635300053
summary	A design project that explores how augmented reality may be incorporated within architecture to embed hybrid ‘info-tectonic’ detail, across a range of scales is documented. The context in which the project is undertaken is the legacy of South Indian temple design. This opens up a complimentary field of research within a cultural context, to locate another agenda for augmented reality in architecture. The idea of cultural augmentation and its articulation at a range of scales, from the tactile to the urban, was generated through the design project. By way of introduction this mode of research is discussed in relation to CAAD research methods. In conclusion, a general model for cultural augmentation with augmented reality as a scalar continuum is presented.
keywords	Augmented reality, cultural augmentation, research through design.
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: