Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_261
id	acadia13_261
authors	Tibbits, Skylar; Falvello, Ana
year	2013
title	BioMolecular, Chiral and Irregular Self-Assemblies
doi	https://doi.org/10.52842/conf.acadia.2013.267
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 267-268
summary	As disciplines converge and new capabilities are developed for programmable materials and self-assembly across length scales and industrial applications, designers will need new models for understanding the fundamental principles within this new paradigm. This paper outlines the key ingredients for self-assembly through a number of recent projects including the BioMolecular Self-Assembly and Chiral Self-Assembly projects. Further possibilities of non-deterministic self-assembly will be highlighted through asymmetrical units, nucleus models and hierarchical assemblies. Finally, opportunities for high-yield self-assembly and future applications for manufacturing and construction scenarios will be outlined. Self-assembly offers a glimpse into a future world of highly programmable, intelligent materials that promise far more adaptive, resilient and efficient built environments.
keywords	next generation technology, self-assembly, programmable materials, chirality, non-deterministic assembly
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	acadia13_000
id	acadia13_000
authors	Beesley, Philip; Omar Khan, Michael Stacey
year	2013
title	ACADIA 13: Adaptive Architecture
doi	https://doi.org/10.52842/conf.acadia.2013
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), 472 p.
summary	ACADIA 2013 Adaptive Architecture, the 33rd International Conference of the Association for Computer-Aided Design in Architecture, focuses on the computational design of environmen- tally responsive, intelligent, interactive, and reconfigurable archi- tecture. Organising this conference we perceive new intellectual territories opening, arising both from technology and from our native inventiveness. In 2013, humankind benefits from millennia of cultural continuity while it faces profound challenges and opportunities. Fuelled by potent new research tools and techniques the discipline of architecture is ripe with potential. New modes of practice offer mod- els where research, design and development are seen as one, and where knowledge passes with extraordinary fluidity, as if by osmosis, from practice to academia, from teacher to pupil and from the future architect to the architect-academic. The future is now.
series	ACADIA
last changed	2022/06/07 07:49

_id	acadia13_319
id	acadia13_319
authors	Mehanna, Ryan
year	2013
title	Resilient Structures Through Machine Learning And Evolution
doi	https://doi.org/10.52842/conf.acadia.2013.319
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 319-326
summary	In the context of the growing usefulness of computation within architecture, structures face the potential for being conceived of as intelligent entities capable of resilient, adaptive behavior.Building on this idea, this work explores the use of machine learning for structures that may learn to autonomously “stand up”. The hypothesis is that a neural network with genetically optimized weights would be capable of teaching lightweight, flexible, and unanchored structures to self-rectify after falling, through their interactions with their environment. The experiment devises a physical and a simulated prototype. The machine-learning algorithm is implemented on the virtual model in a three-dimensional physics environment, and a solution emerges after a number of tests. The learned behavior is transferred to the physical prototype to test its performance in reality. This method succeeds in allowing the physical prototype to stand up. The findings of this process may have useful implications for developing embodied dynamic structures that are enabled with adaptive behavior.
keywords	complex systems, neural networks, genetic algorithms, actuated structures, particle-spring systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	cf2013_286
id	cf2013_286
authors	Pang, Lei; Xiaodong Song, and Chengyu Sun
year	2013
title	Computer Aided Simulation for Compact Residential Regulatory Plan
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 286-294.
summary	Residential land development requires compact and intelligent growth in order to conserve land, especially in countries such as China with a large population but little usable land for built environment. This should not be done at the expense of public green space. Living density is an important issue that cannot be avoided in the urbanization process. This research uses Spatial Form Compact as the goal of trying to support the residential regulatory plan. A prototype site has been chosen to optimize the layout. Suppose the type of residential building had been decided and FAR is given as a premise. This method allows the arrangement of residential buildings to be compact and leads to more available space for concentrated green area, for example parks or other facilities. The BL-based method of genetic algorithm and VB program is used for the optimization and calculation of the prototype. The arrangement of residential buildings which is done by computer in this period is only used to explore the relationship between FAR and reasonable building layout. In order to guide the real construction of the building, the site plan should be done further elaborately under the guidance of regulatory plan by the developer and urban planner.
keywords	Compact, Residential area, FAR, Concentrated Green Space
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	acadia13_431
id	acadia13_431
authors	Parlac, Vera
year	2013
title	Agile Spaces
doi	https://doi.org/10.52842/conf.acadia.2013.431
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 431-432
summary	This project is part of an ongoing research into kinetic material system with focus on non mechanical actuation (shape memory alloy) and structural and material behavior. It proposes an adaptive surface capable of altering its shape and forming small occupiable spaces that respond to external and internal influences and flow of information.
keywords	Next Generation Technology; Adaptive Architecture; Responsive Systems; Shape Memory Alloy; Intelligent Skins
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:59

_id	sigradi2013_29
id	sigradi2013_29
authors	Pereyra Bonifacio, Paulo; Fernando García Amen
year	2013
title	Pieles Responsivas en Arquitectura y Sistemas de Integración Info-Ambiental a través de Tecnología Arduino [Responsive Skins in Architecture and Info-Environmental Systems through Arduino Technology]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 430 - 434
summary	This paper presents a case study consisting in proposing and building a responsive skin that reacts to different environmental impulses using Arduino technology. Thus, we aim to obtain an intelligent, integrated and economic achievement, through digital manufacturing processes and low cost technologies integrated in an architectural project.
keywords	Responsive skins; Info-environmental integration; Digital manufacturing; Constructive processes
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2019_342
id	caadria2019_342
authors	Qureshi, Cyrus, Moleta, Tane Jacob and Schnabel, Marc Aurel
year	2019
title	Beyond the portal - A Study of the Tangible and Intangible Rituals within Sacred Spaces
doi	https://doi.org/10.52842/conf.caadria.2019.1.525
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 525-534
summary	In its ambitions, the paper aims to propose a proof of concept for a Virtual, Augmented and Mixed (VAM) environment that digitally overlays a multifaith space in order to optimize their use, essentially transforming itself to the spiritual needs of the user. In order to do so, a mixed reality experience was developed by investigating and interpreting both the tangible and intangible rituals of prayer. By incorporating an immersive experience, the project promotes the idea of a multifaith space that moves beyond the notion of an "empty white room (Crompton, 2013, p.487)". To develop an immersive experience that caters to people of all religions or no religion is beyond the scope of this project. Hence, by creating a VAM environment for users of the Muslim faith the project may be able to support design ideologies for others, furthering research in this field.
keywords	Tangible and Intangible Rituals; Multifaith Space; Mixed Reality; Digital Mosque
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia13_269
id	acadia13_269
authors	Swackhamer, Marc; Satterfield, Blair
year	2013
title	Breaking the Mold: Variable Vacuum Forming
doi	https://doi.org/10.52842/conf.acadia.2013.269
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 269-278
summary	Our research explores the growth of surface complexity through careful attention to program and performance criteria. As this complexity emerges, however, we are repeatedly confronted with the realization that its cost compromises any of its performance gains. While the aggregation of repeatable units with variation from one unit to the next is achievable at a low cost through subtractive fabrication technologies (CNC milling, laser cutting, waterjet cutting), it is more difficult to achieve through casting or forming technologies (concrete casting, injection molding, vacuum forming). This is because formwork is not adaptable. Once you produce a mold, typically at a high cost, that mold makes one component only. If you want variation, a new mold must be produced for each new component. With the projects Hexwall and VarVac Wall we put forward a simple question: can an intelligent, adaptable vacuum-forming mold be developed that allows for difference from one component to another without the necessity for multiple molds? The research positions our design efforts strategically at the front end of the fabrication process. Our goal is to develop a malleable tool that allows for endless variation in a fabrication process where variation is typically impractical.
keywords	tools and interfaces; vacuum forming, variable, plastic, fabrication, surface, custom tools
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia13_109
id	acadia13_109
authors	Thün, Geoffrey; Velikov, Kathy
year	2013
title	Adaptation as a Framework for Reconsidering High-Performance Residential Design: A Case Study
doi	https://doi.org/10.52842/conf.acadia.2013.109
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 109-118
summary	This paper outlines an approach to adaptive residential design explored through recent research and an executed prototype, the North House project (2007-2009), undertaken through an interdisciplinary collaboration of researchers and students from the University of Waterloo, Ryerson University and Simon Fraser University in concert with professional and industry partners. This project aimed to develop a framework for the delivery of adaptive detached residential buildings capable of net-zero energy performance in the temperate climate zone, or the near north. Within this project, the term “adaptive” is developed across several tracts of conceptualization and execution including site and climatically derived models for building material composition and envelope ratios, environmentally-responsive kinetic envelope components, intelligent HVAC controls and interactive interface design aimed at producing co-evolutionary behaviors between building systems and inhabitants. A provisional definition of adaptive architecture is outlined to address this range of considerations that calls into question the stable image of domestic architecture and its relationship to energy and contemporary assumptions regarding sustainable design. This paper also outlines computational approaches to design optimization, distributed building systems integration and the human-controls interfaces applicable to the home’s ecology of physical and information technologies.
keywords	next generation technology, responsive buildings, high performance envelopes, sensing and feedback, passive and active systems, energy modeling, user interface
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2013_048
id	ecaade2013_048
authors	Wang, Pin-Hung and Lin, Jui-Yen
year	2013
title	Using Smart Controlled AC and Ceiling Fan to Save Energy
doi	https://doi.org/10.52842/conf.ecaade.2013.2.021
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-28
summary	This research aimed to explore the energy savings through the use of smart control as well as ceiling fan in intelligent building. As the energy consumption of air-conditioning (AC) accounts for about 40% of total residential energy, therefore, applying smart control system to the use of AC to achieve the effects of comfy and energy savings should be able to generate positive effect for the energy consumption of overall residential. This study used the smart control system in the intelligent building lab to transmit message to AC for its implementation of next operating step through the indoor temperature sensor in order to achieve energy saving effect.
wos	WOS:000340643600001
keywords	Intelligent building; smart control; energy saving; ZigBee; smart living.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2013_201
id	sigradi2013_201
authors	Bustamante Oleart, Carlos; Paulo K. Ogino Altamirano; Ester Higueras García
year	2013
title	Estrategia Metodológica para la Visualización Digital de Patrones Aerodinámicos Presentes en la Morfología Urbana y su Incidencia en el Uso Estancial de los Espacios Públicos [Methodological Strategy for the Visualization of Aerodynamic Patterns in the Urban Morphology and their Impact on the Use of Public Spaces ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 108 - 111
summary	In relation to cities, wind is one of the less studied meteorological parameter. Constant vertical rate variations from meso scale to micro scale, altogether with strenght, direction, velocity of the urban canyon, makes the wind a complex subject of study. To achieve this, a methodological strategy that addresses the wind's multi dimensionality was raised. It was aplied to Punta Arenas, the southernmost city in the world, where most of the time winds come 90% from the same direction with speeds reaching 128 km/h. Wind's constant directional behavior allows the recognition of areodynamic phenomena produced, in the first instance, for the wind profiles influenced by the urban rugosity and then, at morphologycal level, the aerodynamic behavior of the layered fluids over the building bodies, generating a regular pattern between solids and fluids. The strong winds in cities with cold climate influence the use of public spaces, which, not being designed under this conditions, do not develop proper levels of thermal comfort.
keywords	Aerodynamics; Urban morphology; Public space; Information visualization
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ijac201311301
id	ijac201311301
authors	Hack, Norman; Willi Lauer, Silke Langenberg, Fabio Gramazio, Matthias Kohler
year	2013
title	Overcoming Repetition: Robotic fabrication processes at a large scale
source	International Journal of Architectural Computing vol. 11 - no. 3, 285-300
summary	In the context of the Future Cities Laboratory (FCL) of ETH Zurich, the Professorship for Architecture and Digital Fabrication of Fabio Gramazio and Matthias Kohler has set up a robotic laboratory to investigate the potentials of non-standard robotic fabrication for high rise constructions in Singapore. The high degree of industrialisation of this dominant building typology implies standardisation, simplification and repetition and accounts for the increasing monotony evident in many Asian metropolises. The aim of this research on material systems for robotic construction is to develop a new and competitive construction method that makes full use of the malleable potential of concrete as a building material. A novel, spatial, robotic "weaving" method of a tensile active material that simultaneously acts as the form defining mould, folds two separate aspects of concrete-reinforcement and formwork-into one single robotic fabrication process (see Figure 1). This in-situ process could permit the fabrication of structurally differentiated, spatially articulated and material efficient buildings.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2018_1405
id	sigradi2018_1405
authors	Massara Rocha, Bruno; Santo Athié, Katherine
year	2018
title	Emerging senses from Smart Cities phenomenon
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 434-441
summary	The paper analyses the emerging senses from the Smart Cities phenomenon, using as background Lemos (2017), Maia (2013), Rozestraten (2016), Söderström, Paache & Klauser (2014) and evaluating the speeches found in the SmartCity Expo Curitiba. We identified three basic senses: the binary utopia/ficcion, business and informational city, discussed by philosophers such as Foucault (2017), Lévy (2011) e Harvey (2014). The results outline the importance of political role of technology and adverts that it must not be controlled by business. Finally, the paper concludes that the smartest technology is one that opens space to the inclusion of greater human expressivity and subjectivity, not inducing a space of control.
keywords	Smart cities; Digital technologies; Technopolitics;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2022_000
id	ecaade2022_000
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2022.1
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, 672 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2022_001
id	ecaade2022_001
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design- Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2022.2
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, 646 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
keywords	Proceedings, Front Matter
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2013_068
id	caadria2013_068
authors	Pedersen, Jens and Andy VanMater
year	2013
title	Resource Driven Urban Metabolism – How Can Metabolic Scaling be Used in Urban Design?
doi	https://doi.org/10.52842/conf.caadria.2013.561
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 561-570
summary	City scale projects are complex multivariable problems and have previously been addressed using a variety of organisational principles, whether it be the infrastructural grid, used by Ludwig Hilbersheimer in his project “Hochhausstadt” or the spinal organisation of the Tokyo Masterplan done by Kenzo Tange and the Metabolist Movement. This project strays from traditional methods of structuring a city and investigates a novel self-engineered anticipatory model, which focuses on the use of generative and genetic algorithms to develop a new associative system to develop coastal cities in arid climates. The system functions as a negative feedback loop, analysing existing conditions, and by a series of mathematical functions, projecting the new growth patterns for major components of a city, such as building envelopes, road networks, canal networks and public space distribution as a result of the cities internally generated resources.
wos	WOS:000351496100055
keywords	Computational design, Generative & evolutionary design, Tooling, City modelling, Urban metabolism
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2013_004
id	caadria2013_004
authors	Rekittke, Joerg; Yazid Ninsalam and Philip Paar
year	2013
title	Open to Ridicule – Deploying Plaything Technology for 3D Modelling of Urban Informal Settlements in Asia
doi	https://doi.org/10.52842/conf.caadria.2013.541
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 541-550
summary	As technology affine urban landscape researchers,working in Asian mega cities, we roam through crowded and narrow, widely informal city layouts, where we apply digitalfieldwork equipment and conduct design work. We use low cost cameras and camera drones, tools that had been developed asgadgets for outdoor freaks or plaything for nerds. In this paper, we describe recent advances in the development of amethod of on-site data and image gathering, which allows the processing of concrete 3D models of informal city spaces. Thevisual quality of these models is still moderate, but the resulting three-dimensional spatial puzzlemakes a widelyinaccessible and undocumented piece of city terrain visible, understandable and designable. The software used is free.
wos	WOS:000351496100053
keywords	Fieldwork tools, Mapping, 3D modelling
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia23_v1_110
id	acadia23_v1_110
authors	Scelsa, Jonathan; Sheward, Gregory; Birkeland, Jennifer; Liu, Jemma; Lin, Yun Jou
year	2023
title	Centripetal Clay Printing : Six-Axis Prints for Habitat Column
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 110-115.
summary	Gottfried Semper, in his 1851 text The Four Elements of Architecture, famously classifies architecture into four elemental parts: the hearth, the roof, the enclosure, and the mound, describing the role of the last three to be the “defenders of the hearth’s flame against the three hostile elements of nature (Semper 2011).” Modernity has witnessed the role of enclosure evolve to that of a sealed envelope, or one which meticulously separates the ‘natural environment,’ from the internally regulated environment as part of modern comfort. The post-modern advent of the rain-screen has further separated the layer of exteriorized cultural expression from the structuring envelope, removing the ornamental aspect of Semper’s enclosure, from the enclosing layer. This habit of casting the natural processes out of our building envelopes has resulted in the rapid depletion of space for biodiversity within our cities. Joyce Hwang in her essay “Living Among Pests,” has suggested that the needed reconnection of biodiversity with our urban buildings will force a re-examination of “facade articulation to take on more responsibilities. Ornament will become performative” (Hwang 2013).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

For more results click below: