Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 601

Reformat results as: short short into frame detailed detailed into frame

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaade2013r_009
id	ecaade2013r_009
authors	Orsi, Francesco; Fiorito, Stefano
year	2013
title	Learning from vernacular
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 115-120
summary	By looking at time-tested recurrent design patterns drawn from Portuguese vernacular settlements, the present research tries to address the problem of developing sustainable urban solutions for scattered low density territories throughout Portugal. The research departs from the hypothesis that Portuguese vernacular settlements contain morphological characteristics that can be captured and reused in new designs: this may be particularly useful for rethinking extensive suburban territories’ densification conditions, in order to enhance both their consistency and sustainability. Urban sprawl and uncontrolled space consumption have often hastened the problem of territorial sustainability, that’s the reason why completing, restructuring and enhancing dispersed built environments is of paramount importance in order to foster both cultural and economical sustainability in contemporary Portugal. This project ultimately aims at contributing towards the definition of design procedures and planning tools for the re-urbanization of extensive urban fabrics. One of the major objectives is developing a decision making support tool for generating meaningful and coherent interventions in dispersed urban fabrics which could foster connectivity, integration and quality of life, by doing so this work tries to propose a novel methodology that could prove to be valuable in different contexts, even outside Portugal.
keywords	Generative patterns; Vernacular urbanism; Bottom-up processes; Re-urbanization; Territorial sustainability
email
last changed	2013/10/07 19:08

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
wos	WOS:000340635300027
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
doi	https://doi.org/10.52842/conf.caadria.2013
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2013_381
id	sigradi2013_381
authors	Baltazar, Ana Paula; José dos Santos Cabral Filho; Mateus de Souza van Stralen; Guilherme Ferreira de Arruda; Estevam Quintino Gomes Junior; Laís Rodrigues Pizano; Fabiano Nardy de Moraes;
year	2013
title	Interface de Eletrônica e Objeto Interativo como Introdução ao Knowledge Based Design [Eletronic Interface and Interactive Object as Knowledge Based Design Introduction]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 608 - 612
summary	This paper discusses the evolution of an interface used to introduce eletronics in the foundation design course at the School of Architecture at Universidade Federal de Minas Gerais, Brazil. The use of this interface by the students triggers the discussion of the possibilities of new technologies in architecture and initiates a tactical learning process in which the students are responsible for the very content they are learning. This interface introduces the discussion of interactivity and indeterminism, crucial to the development of the two main works of the course: an individual interactive object and an urban interactive intervention in group.
keywords	Eletronics; Interface; Interactive object; Learning process; Mathetics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2013_063
id	caadria2013_063
authors	Markova, Stanimira; Andreas Dieckmann and Peter Russell
year	2013
title	Custom IFC Material Extension – Extending IFC for Parametric Sustainable Building Design
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2013.013
wos	WOS:000351496100002
summary	The enormous variety of design systems and data formats utilised by the actors in the building design process has been recognised as a significant challenge for information exchange and project management. The introduction of the Industry Foundation Classes (IFC) data standard as a paradigm shift has opened a first time opportunity for smooth data and information exchange over the full range of design related parameters and processes, reaching beyond the classical constructional, economic and safety-related requirements. Moreover, IFC allows for the extension of the standard in further areas, corresponding to the specific design, project or client requirements. These user-driven extensions often close an important gap of the IFC standard and can subsequently be imbedded in new releases of the IFC data standard. This paper is focused on the extension of IFC for the purposes of controlling and managing material use, increasing material efficiency and closing material cycles over the life cycle of a building. Material efficiency is defined by the design scopes of material recyclability, element reusability and waste reduction. The practical implications of the data format extension and design-check performance are examined on the level of the data model and, subsequently, on the level of proprietary Building Information Modelling (BIM) software, based on a pre-defined case.
keywords	Material efficient building design, IFC, Parametric design, Semantic design, BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2013_222
id	cf2013_222
authors	Traunmueller Martin and Ava Fatah gen. Schieck
year	2013
title	Following the Voice of the Crowd: Exploring Opportunities for Using Global Voting Data to Enrich Local Urban Context
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 222-232.
summary	With the introduction of the internet to the public and the rise of digital technologies we experience a shift in our understanding of space. Mobile devices and ubiquitous computing in urban landscape make the physicality of distance disappear – the modern citizen is digitally connected to everybody at anytime and anywhere. The result of this network is a highly globalized world which effects economy same as personal interests and decisions of its inhabitants. The introduction of web 3.0 with its methods of comment, recommender and voting systems offers a broad platform for people all over the world to share experiences and exchange opinions about an unlimited variety of topics. Global opinions meet local interests. In this paper we explore the possibilities of using global voting data to enrich locally the modern citizen’s urban walking experience. We describe a new approach to wayfinding by implementing methods of digital recommender systems into the physical world. We investigate Facebook voting data to generate an alternative to the shortest route, as suggested by common route finder systems, in order to maximize the pleasure of an urban stroll. The testing of the system in a real world context together with collected feedback stimulate the discussions.
keywords	Wayfinding, Urban Pedestrian Navigation, Social Networks, Voting data, Mobile Devices, Recommendation Systems
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_212
id	ecaade2013_212
authors	Beirão, José and Arrobas, Pedro
year	2013
title	Interactive Urban Parametric Design
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 291-299
doi	https://doi.org/10.52842/conf.ecaade.2013.1.291
wos	WOS:000340635300030
summary	This paper presents the use of a City Information Modeling (CIM) platform composed of a GIS platform, a SQL database, a CAD design interface and a VPI used to develop the parametric models of possible development scenarios. It calculates urban indicators and measurable design properties in order to better understand and support choices while making design decisions. Such approach improves the generation of alternative scenarios projections supported by the calculation of urban properties.
keywords	Flexible planning; parametric urban design; alternative scenarios.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_137
id	ecaade2013_137
authors	Camporeale, Patricia
year	2013
title	Genetic Algorithms Applied to Urban Growth Optimization
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 227-236
doi	https://doi.org/10.52842/conf.ecaade.2013.2.227
wos	WOS:000340643600022
summary	This work is a research on the application of genetic algorithms (GA) to urban growth taking into account the optimization of solar envelope and sunlight in open spaces.It was considered a typical block of a Spanish grid, which is the most common subdivision of the urban land in towns situated in Argentina. Two models are compared, one in which the growth has no more limitations than building codes. The other one, in which the growth incorporates the solar radiation as a desirable parameter.This way of parameterizing configures a bottom-up method of urban growth. No top-down decisions intervenes in the growth process.This tool proves to be useful at early stages of urban planning when decisions—which will influence along the development of the city for a long time—are taken.
keywords	Genetic algorithms; solar envelope.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_220
id	caadria2013_220
authors	Chaszar, André and José Nuno Beirão
year	2013
title	Feature Recognition and Clustering for Urban Modelling – Exploration and Analysis in GIS and CAD
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 601-610
doi	https://doi.org/10.52842/conf.caadria.2013.601
wos	WOS:000351496100059
summary	In urban planning exploration and analysis assist the generation, measurement, interpretation and management of the modelled urban environments. This frequently involves categorisation of model elements and identification of element types. Such designation of elements can be achieved through attribution (e.g. ‘tagging’ or ‘layering’) or direct selection by model users. However, for large, complex models the number and arrangement of elements makes these approaches impractical in terms of time/effort and accuracy. This is particularly true of models which include substantial numbers of elements representing existing urban fabric, rather than only newly generated elements (which might be automatically attributed during the generation process). We present methods for identification and categorisation of model elements in models of existing and proposed urban agglomerations. We also suggest how these methods can enable exploration of models, discovery of identities and relationships not otherwise obvious, and acquisition of insights to the models’ structure and contents which are not captured, and may even be obscured, by manual selection or automated pre-attribution.
keywords	City information modelling, Data mining, Feature recognition, Geometric-content-based-search, Urban typologies
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2013_198
id	caadria2013_198
authors	Chee Zong Jie and Patrick Janssen
year	2013
title	Exploration of Urban Street Patterns – Multi-Criteria Evolutionary Optimisation Using Axial Line Analysis
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 695-704
doi	https://doi.org/10.52842/conf.caadria.2013.695
wos	WOS:000351496100068
summary	In urban design, researchers have developed techniques to automate both the generation and evaluation of urban street patterns. In most cases, these approaches are investigated in isolation from one another. Recently, a number of researchers have attempted to couple these approaches, in order to enable larger numbers of street patterns to be generated and evaluated in an iterative loop. However, to date, the possibility of fully automating the generative-evaluative loop using optimisation algorithms has not been explored. This research proposes an explorative design method in which urban street patterns can be optimised for multiple conflicting performance criteria. The optimisation process uses evolutionary algorithms to evolve populations of design variants by iteratively applying three key procedures: development, evaluation, and feedback. For development, a generative technique is proposed for constructing street patterns. For evaluation, various performance measures are used, including in particular Space Syntax based Axial Line analysis. For feedback, a Pareto-ranking algorithm is used that ranks street patterns according to multiple criteria. The proposed method is demonstrated using an abstract scenario in which orthogonal street patterns are evolved for a small urban area.
keywords	Axial line analysis, Generative modelling, Evolutionary algorithms, Decision chain encoding, Urban street patterns
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2013_138
id	sigradi2013_138
authors	Dezen-Kempter, Eloisa
year	2013
title	Diálogos Digitais: Integração entre Dados Documentais em Sistemas de Informação Baseados no Modelo para Conservação do Patrimônio Arquitetônico [Digital Dialogues: Integration of Documentary Data in Model-Based Information Systems for the conservation of the architectural heritage]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 293 - 296
summary	The architectural documentation plays a key role in the preservation of built heritage, as both support decision making in intervention projects, restoration and rehabilitation, such as the actions of preventive conservation. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. The aim of this research is to develop the integration of quantitative data (smart objects, performance data) and qualitative (photographs and historical documents) in model-based information, such as BIM, to be used in surveying, planning and control of interventions in historic buildings.
keywords	BIM; Architectural Conservation databases; Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
wos	WOS:000340643600049
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2013_123
id	caadria2013_123
authors	Erhan, Halil I.; David Botta, Andy T. Huang and Robert F. Woodbury
year	2013
title	Peripheral Tools to Support Collaboration: Probing to Design Collaboration Through Role-Playing
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2013.241
wos	WOS:000351496100024
summary	Peripheral devices like smart phones offer an opportunity to lower the barrier to spontaneous collection and sharing of information during distributed collaboration. We have completed development of guidelines and a framework that focuses on peripheral devices in collaboration. In order to explore the design space generated by our principles, we conducted a role-playing experiment about commissioning a building, in which an “on-site” team and a “design” team were expected to find and resolve discrepancies between requirements, design documents, and the actual site. The teams were given Styrofoam panels to act as pretend smart peripherals to invoke play and help probe the design space. We found that “reflection on action” (debriefing and subsequent brainstorming) was fruitful for ideation and theorem building about interaction, but “reflection in action” failed. Yet, reflection in action, particularly with such probes, is important to capture the “mechanics of collaboration”. Therefore, we are considering adapting improvisational theatre to our study of distributed collaboration.
keywords	Collaborative design, Design support tool, Interactive media, Role-playing, Extended cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_037
id	ecaade2013_037
authors	Georgakopoulou, Sofia; Zünd, Daniel and Schmitt, Gerhard
year	2013
title	The City Biosphere
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 255-264
doi	https://doi.org/10.52842/conf.ecaade.2013.1.255
wos	WOS:000340635300026
summary	This paper introduces a new experimental city generation, assembly and development platform, the urban mutations platform. We describe in detail a methodology for modeling urban systems and their dynamics, based on self-organization principles. The urban area is seen as an organism comprised of different “body parts”, the urban subunits. Upon creation of an initial 3D urban environment, it is possible to add to the subunits the so-called mutations, i.e. structural and functional components that can have beneficial or detrimental effects to the future city development. After addition of the mutations we allow the city to reorganize itself and observe possible changes in the urban configuration. These changes can be directly correlated to the added mutations and their urban qualities and allow us to probe the effect that different structural and functional elements have on the dynamic behaviour of the city, when placed at specific locations.
keywords	Self-organization; mutation; urban qualities; urban grid; urban mutations platform, UMP.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2013_10
id	sigradi2013_10
authors	Gomez, Paula; Matthew Swarts; Pedro Soza; Jonathan Shaw; James MacDaniel; David Moore
year	2013
title	Campus Landscape Information Modeling: Intermediate Scale Model that Embeds Information and Multidisciplinary Knowledge for Landscape Planning
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 61 - 65
summary	Building Information Modeling (BIM) and Geographic Information Systems (GIS), as their names imply, are models of information at different scales that usually appear segregated. Our proposal is to integrate both scales of information in a Campus Information Model (CIM). This paper focuses on the description of this integration in terms of information and knowledge models, from the point of view of landscape design. We emphasize on the description of CLIM, an interactive tabletop we have developed to support collaboration and planning of landscape, which is constructed using models of information and knowledge to perform assessments, including quantitative aspects of effectiveness, efficiency and satisfaction of certain features of the Georgia Tech Campus.
keywords	Campus Information Modeling; Landscape Modeling; Landscape Planning; Knowledge-based Design; Interactive Tabletop
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2013_208
id	caadria2013_208
authors	Kim, Jong Bum; Mark J. Clayton and Wei Yan
year	2013
title	Parameterize Urban Design Codes with BIM and Object-Oriented Programming
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 33-42
doi	https://doi.org/10.52842/conf.caadria.2013.033
wos	WOS:000351496100004
summary	There has been a significant need for the new urban design apparatus that carries out performance analyses of the urban models, since the code reform movements focused on the sustainable urban developments. This research explores the use of parametric Building Information Modeling to enable stakeholders to intuitively understand the implications and consequences of urban design codes. We investigate whether key regulations can be captured as algorithms and ontologies in parametric BIM and Object-Oriented Programming. Then we present our prototype of parametric urban models in a BIM platform that explains (1) the extent which urban design code information can be parameterized in BIM and (2) the methods how parametric models can hold code information. The results show that our prototype enables real-time manipulations of code requirements and interactive visualization of code allowances.
keywords	Parametric modelling, BIM, Object-oriented programming, Urban design codes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2013_197
id	ecaade2013_197
authors	Koenig, Reinhard; Treyer, Lukas and Schmitt, Gerhard
year	2013
title	Graphical Smalltalk with My Optimization System for Urban Planning Tasks
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 195-203
doi	https://doi.org/10.52842/conf.ecaade.2013.2.195
wos	WOS:000340643600019
summary	Based on the description of a conceptual framework for the representation of planning problems on various scales, we introduce an evolutionary design optimization system. This system is exemplified by means of the generation of street networks with locally defined properties for centrality. We show three different scenarios for planning requirements and evaluate the resulting structures with respect to the requirements of our framework. Finally the potentials and challenges of the presented approach are discussed in detail.
keywords	Design optimization; interactive planning support system; generative system integration; evolutionary multi-criteria optimization.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_072
id	ecaade2013_072
authors	Kos, Jose Ripper; Angeloni, Guilherme and Brito, Thiago Mello
year	2013
title	Connecting Dwellers to Building Performance and Weather Data through Sustainable Automation Systems
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 157-165
doi	https://doi.org/10.52842/conf.ecaade.2013.1.157
wos	WOS:000340635300015
summary	The paper presents a prototype for a Home Automation and Information Systems (HAIS) applied to an existing dwelling, the Florianopolis House, with the potential to address building performance and user behavior towards a more sustainable way of living. Home information and automation systems based on a great variety of sensors, associated with local weather stations and climate forecast databases can significantly impact the construction of more sustainable habits in home dwellers. Monitoring the weather variations, building’s performance and the impact each resident’s activity in energy and water consumption is a powerful tool for the dwellers’ awareness and can provide a significant impact on residents’ reconnection with the natural cycles. The development of the graphic interface is highlighted as a critical issue for the communication of building performance, weather data and actuators control.
keywords	Home automation system; user behavior; weather data; graphic interface; building performance.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac201310203
id	ijac201310203
authors	Kotsopoulos, Sotirios D.; Wesley Graybill, Federico Casalegno
year	2013
title	Designing A Connected Sustainable Living Environment
source	International Journal of Architectural Computing vol. 11 - no. 2, 183-204
summary	This paper presents the design and development of a prototype, connected to a sustainable home project, which is at its final stage of implementation in Trento, N. Italy. The paper specifically focuses on the design ends and the technological means deployed in the process of implementing the prototype. Design ends outline the technical premises underpinning the development of the house systems. Technological means refer to the methods and technologies that had been deployed to satisfy the premises. Emphasis is given to the properties of the reconfigurable façade and the autonomous control system of the house, where variable transmittance materials, AI methods for building control and digital simulation are used in combination.
series	journal
last changed	2019/05/24 09:55

For more results click below: