Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 606

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_30
id	sigradi2013_30
authors	Bunster, Victor
year	2013
title	How to Customize Architecture under Heavily Prescribed Design Conditions? Principles and Prospects for an Evolutionary System
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 319 - 323
summary	Architectural design is a complex activity. The development of a building involves management of the diverse goals of a heterogeneous group of agents using no more than the discrete resources of a given setting. These variables can often conflict and result in rigid normative frameworks that can limit the capacity of a designer to respond with accuracy to diverse environmental factors. The main aim of this paper is to present the theoretical foundations of an evolutionary system to assist the customization of architecture under such prescribed design conditions.
keywords	Mass customization; Design computing; Information theory; Evolution; Prescription
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2013_240
id	caadria2013_240
authors	Fok, Wendy W.
year	2013
title	3 Scales of Repurposed Disposability – Diversion of Construction, Renovation and Demolition (CRD)
doi	https://doi.org/10.52842/conf.caadria.2013.811
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 811-820
wos	WOS:000351496100074
summary	Project managers and construction contractors have long recognized the importance of reducing waste and salvaging high value construction and demolition materials such as copper and other metals. Contractors are usually careful about the quantity of materials ordered, how materials are used and how to carefully deconstruct valuable materials. In most cases however, materials that are more difficult to separate and that are worth less per unit weight are still going to landfill, even when they are present in large quantities. This represents an inefficient use of natural resources and uses up landfill capacity unnecessarily. Unfortunately, some contractors do not realize that there are new opportunities for waste minimization, while others are reluctant to implement environmental practices because they believe these practices will increase their project costs. Most contractors are concerned about the cost of the labour that is needed to deconstruct materials for reuse or recycling. However, it has been shown that effective waste management during CRD projects not only helps protect the environment, but can also generate significant economic savings. Various projects from within our practice and within our academic curriculum will be brought into the attention of this paper. Specifics of modularity, form/fit/analysis, fabrication, and off-site production, will be demonstrated within the larger discussion through the focus onto three case studies.
keywords	Construction alternatives, Waste management, Offsite production, Fabrication, Form/Fit/Analysis, Modularity
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
doi	https://doi.org/10.52842/conf.caadria.2013.407
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
wos	WOS:000351496100040
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.497
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2013_097
id	caadria2013_097
authors	Schnabel, Marc Aurel and Jeremy J. Ham
year	2013
title	A Framework for Social Networked Architectural Education
doi	https://doi.org/10.52842/conf.caadria.2013.313
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 313-322
wos	WOS:000351496100031
summary	Students engage in Social Networks (SN) as a form of interaction with friends and tutors, as news or learning resource, to make their voices heard or to listen to other views and many more. Online SN work in close association with offline SN to form a blended social environment that greatly enables and enhances students’ learning. Some Schools of Architecture have struggled or failed to engage in the potential of SNor their respective University’s online Learning Management Systems (LMS). Despite efforts to facilitate blended learning environments or to engage students in problem-based learning activities architectural education often fails to tap into the rich resources that online social learning environments offers through their collective and social intelligence of its users. This paper proposes a framework for SN architectural education that provides opportunities for linking the academic LMS with private or professional SN such that it enhances the learning experience and deepens the knowledge of the students. The paper proposes ways of utilising SN supported learning environments in other areas of the curriculum and concludes with directions of how this framework can be employed in professional settings.
keywords	Social networks, Social learning, Architectural curriculum
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2013_257
id	ecaade2013_257
authors	Trento, Armando and Fioravanti, Antonio
year	2013
title	Human Activity Modelling Performed by Means of Use Process Ontologies
doi	https://doi.org/10.52842/conf.ecaade.2013.2.385
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 385-394
wos	WOS:000340643600039
summary	Quality, according to Pirsig’s universal statements, does not belong to the object itself, nor to the subject itself, but to both and to their interactions. In architecture it is terribly true as we have a Building Object and Users that interact with it.The problem we approach here, renouncing at the impossible task of modelling the actor’s “libero arbitrio”, focuses on defining a set of occurrences, which dynamically happen in the built environment. If organized in a proper way, use process knowledge allows planners/designers to represent usage scenario, predicting activity inconsistencies and evaluating the building performance in terms of user experience.With the aim of improving both, the quality of buildings and the user experience, this research explores a method for linking process and product ontologies, formalized to support logic synchronization between software for planning functional activities and software for authoring design of infrastructures.
keywords	Design knowledge modelling; process ontology; knowledge management.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2013_165
id	ecaade2013_165
authors	Simeone, Davide; Kalay, Yehuda E.; Schaumann, Davide and Hong, Seung Wan
year	2013
title	Modelling and Simulating Use Processes in Buildings
doi	https://doi.org/10.52842/conf.ecaade.2013.2.059
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 59-67
wos	WOS:000340643600005
summary	In this paper, we propose a new approach to simulating users’ behavior in yet un-built buildings. For this purpose, we have developed a model that connects two different representations: a formal representation of the building use, by means of a method borrowed from Business Process Modeling and Notation (BPMN) approach; and a game-engine based 3D virtual environment, where this process is effectively simulated and integrated with some autonomous behaviour of users/agents. The model has been applied to two test cases, where the activities of doctors, nurses, patients, and visitors in different hospitals were tracked, simulated, and reviewed by medical professionals for validation.
keywords	Building use simulation; human behaviour modelling; BPMN; activity-based modelling; building performances prediction.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2013.2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2013.1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	cf2013_274
id	cf2013_274
authors	Sun, Chengyu; Bauke de Vries, Wenfeng Bai, and Tuo Hu
year	2013
title	A Comparative Study on Choice Modeling Framework for Evacuation Simulation
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 274-285.
summary	A choice modeling framework for evacuation simulation is needed for a better understanding of the human choice behavior. Facing with the debate between bounded and full rationality, this study builds upon different frameworks and tests them on a same set of choice data collected through virtual evacuation experiment. After comparisons, it is found that there is no significant performance difference between the two kinds of rationality. Additionally, an algorithm comparing pairs of alternatives in choice process performs much better than an algorithm evaluating individual alternatives. An improved utility maximizing model framework and an overall performance decline similar as the forgeting curve are proposed. Finally, it is concluded that the proposed choice model comparing pairs with its great robustness under varying number of alternatives is a proper choice for evacuation simulation.
keywords	bounded rationality, utility maximizing model, performance comparison, number of alternatives
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2013_220
id	caadria2013_220
authors	Chaszar, André and José Nuno Beirão
year	2013
title	Feature Recognition and Clustering for Urban Modelling – Exploration and Analysis in GIS and CAD
doi	https://doi.org/10.52842/conf.caadria.2013.601
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 601-610
wos	WOS:000351496100059
summary	In urban planning exploration and analysis assist the generation, measurement, interpretation and management of the modelled urban environments. This frequently involves categorisation of model elements and identification of element types. Such designation of elements can be achieved through attribution (e.g. ‘tagging’ or ‘layering’) or direct selection by model users. However, for large, complex models the number and arrangement of elements makes these approaches impractical in terms of time/effort and accuracy. This is particularly true of models which include substantial numbers of elements representing existing urban fabric, rather than only newly generated elements (which might be automatically attributed during the generation process). We present methods for identification and categorisation of model elements in models of existing and proposed urban agglomerations. We also suggest how these methods can enable exploration of models, discovery of identities and relationships not otherwise obvious, and acquisition of insights to the models’ structure and contents which are not captured, and may even be obscured, by manual selection or automated pre-attribution.
keywords	City information modelling, Data mining, Feature recognition, Geometric-content-based-search, Urban typologies
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_125
id	ecaade2013_125
authors	Di Mascio, Danilo
year	2013
title	Understanding and Managing the Constructive Characteristics of Vernacular Architecture
doi	https://doi.org/10.52842/conf.ecaade.2013.2.435
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 435-444
wos	WOS:000340643600044
summary	In this paper a methodology will be presented to investigate and document the constructive characteristics of two raw earth houses: artifacts that belong to the vernacular architecture. The comprehension, analysis and documentation of these architectures presents several problems mainly linked to the impossibility of using a predefined method, because the difficulties relating to each artifact and its characteristics, to particular geographic, cultural and social situations, are unique. To understand and document the constructive features it was decided to realize a three-dimensional digital reconstruction of the two artifacts, using 3D modeling software. Subsequently several graphic works have been elaborated (technological breakdown, sheets with detailed information about the materials, used constructive techniques, etc), useful in managing a recovery or maintenance project.
keywords	Vernacular architecture; raw earth dwelling; 3D modeling; digital reconstruction; knowledge management.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013r_008
id	ecaade2013r_008
authors	Gargaro, Silvia; Fioravanti, Stefano
year	2013
title	Traditions based on context. How context ontologies can help archaeological sites.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 105-114
summary	Nowadays ICT tools are part of the cultural tradition of designers and over time have replaced pencil and paper in design development. The application programs for design are many and for different purposes, but the role and importance of Context often are underestimated. For new tradition, it needs “Context Knowledge Model” based on ontologies for the management of buildings and preservation and enhancement of cultural heritage with technological innovation. Context modeling gives the opportunity to address the management of pre-existing building in a conscious way. The interoperability of data and knowledge of Context is important to analyze the quality of building process. This is based on standard concepts of the project for the recovery and restoration of the buildings starting from knowledge of context. The goal of this research is to exploit information technology to advance and define knowledge of context monitoring, management and maintenance of historic buildings. The representation of context is important to understand physical, social, economic and normative Context in which the building was placed. The process used to analyze Context entities were Ontologies. This theoretical model will be applied to underground archaeological Roman sites, to implement semantic levels in IFC and BIM for building design.
keywords	Archaeological sites, Collaborative design, Context, Ontology, Design Process
email
last changed	2013/10/07 19:08

_id	sigradi2013_397
id	sigradi2013_397
authors	Herrera Polo, Pablo C.
year	2013
title	Patrones en la Enseñanza de la Programación en Arquitectura: De la Hetero-Educación a la Auto-Educación en Latinoamérica [Patterns in the Teaching of Visual Programming in Architecture: From the Hetero-Education to Self-Education in Latin America ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 555 - 559
summary	Teaching programming to architects, in academic and professional contexts, occurs in Latin America through self-management, and focused on results, without analyzing the processes and establishing a follow-up to participants, to establish patterns of application. The pointing out of these problems and the proposal of how to make said education sustainable has allowed finding variables specific to the region and to the very same tools and instruments, which are constantly evolving. At the same time, it is proposed after the analysis, that hetero-education (shared learning) itself requires self-education (self-teaching processes) as a complementary process.
keywords	Visual programming; Scripting; Hetero education; Self education; Rhino
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2013_238
id	sigradi2013_238
authors	Lima, Fernando; Vinícius Morais; Frederico Braida; Raiane Duque
year	2013
title	Protótipo Virtual a partir da Plataforma BIM: Uma Base Digital de Dados para Estudos Simulativos de Cenários Ambientais e Mapeamento de Infra-estrutura [Virtual Prototype from the BIM platform: A digital Database for Environmental Simulation Studies and Infrastructure Mapping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 297 - 301
summary	In this article is presented some results of the studies and data obtained in the undergraduates’ research project linked to the Architecture and Urbanism curse of the Federal University of Juiz de Fora (UFJF), in which a digital evaluative approach of environmental performance of buildings in the campus is pursued. In this paper is reported the unfolding of this research project that aims to develop a virtual prototype in Building Information Modelling platform of a campus construction, and its application in environmental simulation studies as well as the management of the building´s information as-built.
keywords	Virtual Prototype; Building Information Modeling; Simulation Studies
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2013_127
id	ecaade2013_127
authors	Lückert, Angelika; Koch, Volker and von Both, Petra
year	2013
title	Dances with Architects
doi	https://doi.org/10.52842/conf.ecaade.2013.2.587
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 587-594
wos	WOS:000340643600060
summary	This paper proposes a complementary approach for the architectural design studio. By interpreting architecture by means of an interactive (dance) performance as design task it combines architectural theoretical examination with the implementation of new technologies and event realization. This design studio concept integrates scenography, choreography, sound design and event management, providing workshops carried out by external and internal experts to give insight into these disciplines and new tools. The experimental form allows the students to define the specific form within a broad scope, ranging from a dance performance performed by the students themselves to an interactive installation. The focus for the students was on dealing with the diverse input and on the decision-making process and its reflection.
keywords	Interactive; performance; teaching; collaboration; gesture control.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2013_063
id	caadria2013_063
authors	Markova, Stanimira; Andreas Dieckmann and Peter Russell
year	2013
title	Custom IFC Material Extension – Extending IFC for Parametric Sustainable Building Design
doi	https://doi.org/10.52842/conf.caadria.2013.013
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 13-22
wos	WOS:000351496100002
summary	The enormous variety of design systems and data formats utilised by the actors in the building design process has been recognised as a significant challenge for information exchange and project management. The introduction of the Industry Foundation Classes (IFC) data standard as a paradigm shift has opened a first time opportunity for smooth data and information exchange over the full range of design related parameters and processes, reaching beyond the classical constructional, economic and safety-related requirements. Moreover, IFC allows for the extension of the standard in further areas, corresponding to the specific design, project or client requirements. These user-driven extensions often close an important gap of the IFC standard and can subsequently be imbedded in new releases of the IFC data standard. This paper is focused on the extension of IFC for the purposes of controlling and managing material use, increasing material efficiency and closing material cycles over the life cycle of a building. Material efficiency is defined by the design scopes of material recyclability, element reusability and waste reduction. The practical implications of the data format extension and design-check performance are examined on the level of the data model and, subsequently, on the level of proprietary Building Information Modelling (BIM) software, based on a pre-defined case.
keywords	Material efficient building design, IFC, Parametric design, Semantic design, BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: