Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 610

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_311
id	acadia13_311
authors	Maxwell, Iain; Pigram, David; McGee, Wes
year	2013
title	The Novel Stones of Venice: The Marching Cube Algorithm as a Strategy for Managing Mass-customisation
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 311-318
doi	https://doi.org/10.52842/conf.acadia.2013.311
summary	The Marching Cube (MC) algorithm is a simple procedural routine for the surface representation of three- dimensional scalar fields. While much has been written of the algorithm’s efficiencies and adaptive nature within the domain of computer graphics and imaging, little has been explored within the context of architectural geometry and fabrication. This paper posits a novel implementation of the MC algorithm coupled with robotic fabrication (RF) techniques, to realise an open-ended design method that approaches mass-customisation as the unique geometric distortion of a finite set of topologically consistent families of tectonic elements.The disciplinary consequences of this and similar methods that intimately couple algorithmic design techniques with robotic fabrication are discussed. These include the re-affirmation or expansion of the role of the architect as master builder that is enabled by challenging Leon Battista Alberti’s 15th Century division between design concept and building.The method and its disciplinary potentials are illustrated through the description of an installation built by the authors for the Australian Pavilion at the Venice Biennale. Clouds of Venice serves as a case study for a new integrated mode of production, one that increases the quality and number of feedback relations between design, matter and making.
keywords	tools and interfaces, mass-customisation, robotic fabrication, algorithmic architecture, marching cube, digital fabrication
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	acadia13_327
id	acadia13_327
authors	Raspall, Felix; Imbern, Matías; Choi, William
year	2013
title	Adaptive Tectonic Systems: Parametric Modeling and Digital Fabrication of Precast Roofing Assemblies Toward Site-Specific Design Response
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 327-336
doi	https://doi.org/10.52842/conf.acadia.2013.327
summary	In order to design adaptable systems, the requirements include flexible models to generate a range of alternative configurations, analytical engines to evaluate performance, and well-defined selection criteria to identify suitable options. In most cases, design processes driven by performance concentrate on environmental or structural parameters; fabrication often remains disconnected from the generative process. Nonetheless, as design-to-fabrication methods become more robust, it is possible to extend the digital process to introduce fabrication variables to the definition of the project. The main focus of the research presented in this paper is the development of a digital and material workflow that connects design, structural and climate-specific topics (such as sun lighting and water drainage) toward producing a range of efficient structural and spatial assemblies.A case study serves as the main support for this investigation. Miguel Fisac’s “bones” is a light-weight roof system developed during the 1960’s, which had a very well-calibrated structural, natural-lighting, drainage and construction performance, as well as a highly refined spatial output. The system, despite its intelligence, lacked the flexibility possible today: using digital technologies, it can adapt to a significantly wider range of applications. Using “bones” as a starting point, this research develops a design-to-fabrication workflow that attempts to move forward tools, material systems and processes to enable an adaptable tectonic system.This paper describes the background research, concept, form-finding, construction process, methodology, results and conclusions of the investigation.
keywords	complex systems, parametric design, integrated design and fabrication, mass customization, Miguel Fisac bones, adaptive material system
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 08:00

_id	caadria2013_076
id	caadria2013_076
authors	Raspall, Felix; Matias Imbern and William Choi
year	2013
title	Fisac Variations: An Integrated Design and Fabrication Strategy for Adaptable Building Systems
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 55-64
doi	https://doi.org/10.52842/conf.caadria.2013.055
wos	WOS:000351496100006
summary	The promise of robotic fabrication as an enabler for mass-customization in Architecture has been hindered by the intricate workflow required to go from parametric modelling to CNC fabrication. The lack of integration between highly-specialized proprietary software, normally required to operate the machines, and most of the design tools constitutes a major limitation. One way to tackle this constraint is by developing simple tools that directly link parametric modelling to robotic coding. Accordingly, “Fisac Variations” develops an uninterrupted digital workflow from form-generation to robotic fabrication. This innovative approach to Computer Aided Design and Manufacturing was tested by studying and reengineering a specific historic construction system -Miguel Fisac’s Bones System was used as a case study- and by enabling it to address problems of contemporary architectural agenda such as flexibility, variability and mass-customization. The proposed workflow threads form-finding, structural analysis, geometric definition, CNC code generation and digital fabrication within the same open-source computational environment. In this way, this innovative procedure aims to increase design freedom while ensuring fabrication feasibility. This paper describes background research, concept, form-finding, construction process, methodology, results and conclusions.
keywords	Parametric design, Digital fabrication and construction, Integrated design and fabrication, Mass-customization, Miguel fisac bones system
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2013_52
id	sigradi2013_52
authors	Rivera, Omar; Alexis Salinas; Paula Ulloa; Oscar Otárola; Braulio Gatica; William Fuentes; Rodrigo García Alvarado; Mauro Chiarella
year	2013
title	Emprendimiento de Componentes Constructivos Paramétricos [Entrepreneurship of Building Parametric Components]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 244 - 248
summary	New technologies of parametric design and digital fabrication encourages development of building components, involving a new approach to architectural work and promote professional endeavors. This paper presents several experiences of recent graduates of architecture in U. Bio-Bio, Chile, which demonstrate these capabilities. The development of a roof module, a structural grid, a flexible envelope, cutting partitions and folded units for wind protection are examples of mass-customization, with implementation of new processes of design, construction and divulgation into the building industry.
keywords	Parametric Design, Digital Fabrication, Building Construction, Entrepreneurship, Innovative Architecture
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	caadria2013_223
id	caadria2013_223
authors	Schimek, Heimo; Albert Wiltsche, Markus Manahl and Christoph Pfaller
year	2013
title	Full Scale Prototyping – Logistic and Construction Challenges Realising Digitally Designed Timber Prototypes
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 653-662
doi	https://doi.org/10.52842/conf.caadria.2013.653
wos	WOS:000351496100064
summary	This paper reports on the final stage of a research project with the realization of a real scale prototype and ties an empirical finale to the project, which started as a fundamental research project three years ago. The scope of this research project was to explore new ways, how Non-Standard Architecture can be build with standard building elements using contemporary building processes and materials resource efficiently. Mass Customization and File to Factory, concepts where a continuous digital workflow is applied, were fundamental to our approach. Within this framework we developed generic parametric details and made them part of the whole process from the beginning of the design to the manufacturing. The present paper describes a strategy for the assembly of a large prototype, consisting of approximately 50 flat timber panels that are being assembled to a structure of the size of a small house. The paper focuses especially on the customized falsework, we designed for the construction of the prototype, which became a crucial part of the assembling process besides the assembly of the actual prototype.
keywords	Digital fabrication and construction, Precedence and prototypes, Mass customization
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	sigradi2013_259
id	sigradi2013_259
authors	Barbosa Curi, Camila; Neander Furtado Silva
year	2013
title	Habitação na Sociedade de Informação: Configurador de Design para o Mercado Imobiliário Brasileiro [Housing in the Information Society: Design Configurator for the Brazilian Real Estate Market]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 76 - 80
summary	In this paper, we present preliminary specifications for a computer design tool for the application of mass customization in middle class apartment design in Brazil. Believing that in the digital era, network communication and digital design tools combined may create a design environment that considers consumer needs and preferences, we present a simple drafting of a computer tool that makes use of those concepts. And therefore we believe to contribute for the future construction of a design system that redefines problem scenarios, rather than providing individual solutions, repositioning architects and clients in the design process.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia13_417
id	acadia13_417
authors	Bunster, Victor
year	2013
title	An Evolutionary System for Mass Customization under Prescriptive Design Conditions
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 417-418
doi	https://doi.org/10.52842/conf.acadia.2013.417
summary	Architects often need to work under highly prescriptive design conditions that can limit their capacity to accurately address contrasting environmental phenomena. This research develops an evolutionary system for increasing design options in these contexts by exploring the possibilities of complex systems theory and mass customization.
keywords	complex systems, multi-agent systems, mass customization, evolution, prescription, modularity
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:54

_id	sigradi2013_30
id	sigradi2013_30
authors	Bunster, Victor
year	2013
title	How to Customize Architecture under Heavily Prescribed Design Conditions? Principles and Prospects for an Evolutionary System
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 319 - 323
summary	Architectural design is a complex activity. The development of a building involves management of the diverse goals of a heterogeneous group of agents using no more than the discrete resources of a given setting. These variables can often conflict and result in rigid normative frameworks that can limit the capacity of a designer to respond with accuracy to diverse environmental factors. The main aim of this paper is to present the theoretical foundations of an evolutionary system to assist the customization of architecture under such prescribed design conditions.
keywords	Mass customization; Design computing; Information theory; Evolution; Prescription
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_126
id	ecaade2013_126
authors	Castro e Costa, Eduardo and Duarte, José Pinto
year	2013
title	Tableware Shape Grammar
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 635-644
doi	https://doi.org/10.52842/conf.ecaade.2013.2.635
wos	WOS:000340643600066
summary	Mass customization is pointed as a means of improving a company’s competitiveness, which is an essential trait in Europe’s economic situation of today. This paper reports a mockup implementation of the mass customization paradigm to ceramic tableware design, through the use of shape grammars, parametric modelling and rapid prototyping. Focus is emphasized on the initial development of a parametric shape grammar as a design system, operating on curved surfaces and solids. Mapping operations are suggested for dealing with the formal complexity of these shapes. This initial academic experiment poses as a first step into the development of a mass customization system that is expected to meet industry standards.
keywords	Mass customization; ceramic tableware; generative design; shape grammars; rapid prototyping.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2013_364
id	sigradi2013_364
authors	Maing, Minjung; Rodrigo Vargas
year	2013
title	Digital Fabrication Processes of Mass Customized Building Facades in Global Practice
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 415 - 419
summary	This paper describes the process of digital design and fabrication for customized building facades and effects from highly customized configurations in U.S., major manufacturing power of China, and emerging construction in Asia and South America. Case studies are presented to form comparisons of technology adoption to project workflow in these three global contexts. Although integration of digital fabrication has shown signs of success in U.S., traditional practices of limited digital information exchange are commonplace in Asia and South America. With focus on adoption of new fabrication tools, BIM and larger production capacity, the potential benefits of digital fabrication are imminent.
keywords	Digital fabrication; Building facades; Mass customization; Curtain wall; BIM
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia13_367
id	acadia13_367
authors	Søndergaard, Asbjørn; Amir, Oded; Knauss, Michael
year	2013
title	Topology optimization and digital assembly of advanced space-frame structures
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 367-378
doi	https://doi.org/10.52842/conf.acadia.2013.367
summary	This paper presents a novel method for the integrated design, optimization and fabrication of space-frame structures in an autonomous, digital process. Comparative numerical studies are presented, demonstrating achievable mass reduction by application of the method by comparison to equivalent to normative space truss designs and dimensions. As such, a principal digital fabrication and assembly scheme is developed, where an architectural design methodology relative to the described process is established, and the proposed process is demonstrated through scaled digital fabrication experiments.
keywords	space-frame structures, topology optimization, robotic assembly, digital fabrication, steel
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2013_243
id	sigradi2013_243
authors	Andia, Alfredo
year	2013
title	Automated Architecture: Why CAD, Parametrics and Fabrication are Really old News
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 83 - 87
summary	Automation is transforming a significant number of industries today. This paper discusses how the Design and Construction industry is also entering into a new era of automation. In the paper I observe that designers are automating by using parametric tools (BIM, scripting, etc.) while contractors are moving into pre-fabrication and modularization. Both conceptualizations are incomplete. The paper presents how we are in the first steps of creating learning algorithms that develop specific intelligence in design synthesis and how the design field will became even more sophisticated as a second generation of multi-material 3D printing techniques produce new materials.
keywords	Automation; Architectural design; Artificial intelligence; Learning algorithms; Multi-material printers
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2013_034
id	caadria2013_034
authors	Arenas, Ubaldo and José Manuel Falcón
year	2013
title	ALOPS Constructive Systems – Towards the Design and Fabrication of Unsupervised Learning Construction Systems
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 905-914
doi	https://doi.org/10.52842/conf.caadria.2013.905
wos	WOS:000351496100093
summary	In this paper we explore the concept and design guidelines for an Autonomous Learning Oriented Proto System (ALOPS), a construction system designed to enhance its own performance through time. Our research has been focused on the fabrication of a prototype for a porous wall system which reacts to light intensities by closing or opening its apertures. Taking that aim, we used a combination of robotics, programing, and material behaviour to endow the system with the capacity to record reactions towards encountered sets of conditions during its active energy periods, allowing the system to use this knowledge database to evolve autonomously by feeding this information back into the computation process. This approach in construction systems opens up the architectural design processes to address the creation of digital memory structures rather than complex algorithms in order to operate specific functions. With this development, the architect could think of architectures constantly evolving by learning from their environments as well as of users forming symbiotic and behavioural bonds with the emergent spatial personalities, thus affecting the underpinning relationships between architecture, user and context.
keywords	erformance architecture, Unsupervised learning, Machine learning
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia13_121
id	acadia13_121
authors	Beites, Steven
year	2013
title	Morphological Behavior of Shape Memory Polymers Toward a Deployable, Adaptive Architecture
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 121-128
doi	https://doi.org/10.52842/conf.acadia.2013.121
summary	Shape-memory polymers (SMPs) are an emerging class of “smart materials” that have dual-shape capability. They are able to undergo significant deformation when exposed to an external stimulus such as heat or light. SMPs have been widely investigated within the biomedicine and aerospace industries; however, their potential has yet to be explored within an architectural framework. The research presented in this paper begins an investigation into the morphological behavior ofSMPs toward a deployable, adaptive architecture. The structure’s ease of assembly, compact storage, transportability and configurable properties offer promising applications in emergency and disaster relief shelters, lightweight recreational structures and a variety of other applications in the temporary construction and aerospace industry. This paper explores the use of SMPs through the development of a dynamic actuator that links a series of interconnected panels creating overall form to a self-standing structure. The shape-shifting behavior of the SMP allows the dynamic actuator to become flexible when storage and transportability are required. Alternatively, when exposed to the appropriate temperature range, the actuator is capable of returning to its memorized state for on-site deployment. Through a series ofprototypes, this paper will provide a fundamental understanding of the SMP’s thermo-mechanicalproperties toward deployable, adaptive architecture.
keywords	next-generation technology, smart materials, shape-memory polymers, material analysis, smart assemblies, dynamic actuator, soft architecture
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2013r_020
id	ecaade2013r_020
authors	Bello Diaz, Gabriel; Dubor, Alexandre
year	2013
title	Magnetic architecture. A new order in design
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 237-245
summary	With the exploration of additive manufacturing, Magnetic Architecture develops different systems and strategies to use magnetic fields for controlling material through construction. In this research we utilize the overlapping of different technologies and digital tools that participate in the innovation of architecture. Thanks to hacked 6-axis robots, Magnetic Architecture approaches decision making from a top/down and bottom/up process. These new processes and conclusions are continuously leading to more areas of research and new design processes, which begins to question the role of the architect with these emerging technologies.
keywords	Additive Manufacturing; Sensor Logic; Incremental Coding; Dynamic Blueprints (DBP)
email
last changed	2013/10/07 19:08

_id	acadia13_393
id	acadia13_393
authors	Bieg, Kory
year	2013
title	Rapid Type Coffee Pod
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 393-394
doi	https://doi.org/10.52842/conf.acadia.2013.393
summary	Rapid Type Coffee Pod combines prefabricated building construction, parametric modeling and the financial vitality of the food truck movement into the design of a prototypical full-service mobile sales platform.
keywords	Teaching; design build, parametric, 3ds Max, Grasshopper, boolean, mobile
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:52

_id	acadia14_199
id	acadia14_199
authors	Bieg, Kory
year	2014
title	Caret 6 and the Digital Revival of Gothic Vaults
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2014.199
summary	Caret 6 in an installation and exhibition designed and curated by Kory Bieg and his students from the University of Texas at Austin Studio he taught in the fall of 2013. The installation supports prototypes and the winning project from the Tex-Fab 2013 SKIN Competition.
keywords	Digital Fabrication and Construction, Vault, Kangaroo, Grasshopper, Parametric, Installation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	acadia14projects_07
id	acadia14projects_07
authors	Bieg, Kory
year	2014
title	Caret 6
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 07-10
doi	https://doi.org/10.52842/conf.acadia.2014.007
summary	Caret 6 in an installation and exhibition designed and curated by Kory Bieg and his students from the University of Texas at Austin Studio he taught in the fall of 2013. The installation supports prototypes and the winning project from the Tex-Fab 2013 SKIN Competition.
keywords	Digital Fabrication and Construction, Vault, Kangaroo, Grasshopper, Parametric, Installation
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:52

For more results click below: