Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 609

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_037
id	ecaade2013_037
authors	Georgakopoulou, Sofia; Zünd, Daniel and Schmitt, Gerhard
year	2013
title	The City Biosphere
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 255-264
doi	https://doi.org/10.52842/conf.ecaade.2013.1.255
wos	WOS:000340635300026
summary	This paper introduces a new experimental city generation, assembly and development platform, the urban mutations platform. We describe in detail a methodology for modeling urban systems and their dynamics, based on self-organization principles. The urban area is seen as an organism comprised of different “body parts”, the urban subunits. Upon creation of an initial 3D urban environment, it is possible to add to the subunits the so-called mutations, i.e. structural and functional components that can have beneficial or detrimental effects to the future city development. After addition of the mutations we allow the city to reorganize itself and observe possible changes in the urban configuration. These changes can be directly correlated to the added mutations and their urban qualities and allow us to probe the effect that different structural and functional elements have on the dynamic behaviour of the city, when placed at specific locations.
keywords	Self-organization; mutation; urban qualities; urban grid; urban mutations platform, UMP.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_178
id	ecaade2013_178
authors	Pak, Burak and Verbeke, Johan
year	2013
title	Walkability as a Performance Indicator for Urban Spaces
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2013.1.423
wos	WOS:000340635300044
summary	This paper frames walkability as a performance indicator for urban spaces and critically addresses some of the existing evaluation methods. It introduces alternative strategies and tools for enabling the collective evaluation of walkability and discusses how experiences of the citizens can possibly lead to a social construct of walkability. This discussion is elaborated by a pilot study which includes exploratory research, social-geographic web services and heat maps. Using these tools and methods, it was possible to derive various experiential and environmental spatial qualities, extract problems and identify problematic areas. From these we have learned that walkability may serve as a fruitful conversation framework and a participatory research concept. Furthermore, we were able to develop ideas for solutions to design and planning problems.
keywords	Walkability; experiential knowledge; collective mapping; social web.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2013_262
id	ecaade2013_262
authors	Rolando, Andrea and D’Uva, Domenico
year	2013
title	Hyperdomes
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 315-324
doi	https://doi.org/10.52842/conf.ecaade.2013.2.315
wos	WOS:000340643600032
summary	The development of new shapes in architecture has deeply influenced the current perception of the built environment. The analysis of the processes behind this evolution is, therefore, of great interest. At least two well known factors, influencing this development, may be pointed out: the great improvement of digital tools and the tendency toward building distinctiveness.In particular, the innovation of digital tools such as parametric modeling is resulting in an overall diffusion of complex shapes, and the phenomenon is also evident in a clear expressionistic search for architectural singularity, that some might consider as a negative effect of globalization trends.Though, if we can consider as a positive result the fact that parameterization allows a deeper control over design factors in terms of reference to cultural, historical and physical context, at the same time such control possibilities are sometimes so stark to be even auto-referential, stepping over site-specific parameterization, to create unusual shapes just for the sake of complexity.The ever-growing diffusion of generative design processes is in fact going to transform niche procedures, frequently limited to temporary decontextualized structures, into an architectural complexification as an end in itself.The hypothesis of this paper is to demonstrate that site-specific parametrization can be considered as a tool able to translate intentions into shape; it is necessary, for this aim, the widening of the meaning of the word singularity.
keywords	Urban environment; distinctiveness; non-standard roofing structures.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2013_021
id	caadria2013_021
authors	Alhadidi, Suleiman
year	2013
title	Generative Design Intervention: Creating a Computational Platform for Sensing Space
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 345-354
doi	https://doi.org/10.52842/conf.caadria.2013.345
wos	WOS:000351496100034
summary	This paper outlines some investigations from a project which utilizes computing and scripting of specific site components, spatio-temporal movement and behavioural patterns to explore how designer might understand people activities and formulate design interventions within public spaces. This research looks at how generative tools can facilitate designers to integrate the large volume of information received by hybrid data collection, and conventional data analysis directly into the design process. Through an examination of sensing urban space, this research proposes a method to track and record people’s movement patterns in order to implement them via generative design tool. To facilitate this, a scripting method is specified; which uses sensors and motion tracking devices to capture the use of a specific public space. This project proposes a methodology for developing designed spaces and optimal pathways generated from real-time data and feedback captured by sensors.
keywords	Real-time computation, Generative design, Sensing space, Design simulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
wos	WOS:000361385100030
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_069
id	ecaade2013_069
authors	Araneda, Claudio
year	2013
title	The Jacobs´ Urban Lineage Revisited
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 355-363
doi	https://doi.org/10.52842/conf.ecaade.2013.2.355
wos	WOS:000340643600036
summary	Since the almost simultaneous publication of Kevin Lynch and Jane Jacobs´ seminal and pioneer urban manifestos, the discipline has been increasingly permeated by what could be rightly called the phenomenological impulse. While sharing methodological principles, however, they represent two very distinct approaches to the study of urban matters, a distinction rooted on their chosen object of study. The drawing of this distinction constitutes this research´s point of departure. Its fundamental aim is to help further the development of what we characterize as the Jacobs´s lineage of urban thought. To this end, the paper outlines methodological rudiments for the development of a methodological tool that would allow the beginning of a systematic study of the patterns of people´s presence and absence in urban space (streets). We call it Urban Polaroid. This work is part of a government funded (fondecyt 11110450) project.
keywords	Urban phenomenon; phenomenology; Urban Polaroid; space syntax; Jane Jacobs.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_003
id	ecaade2013_003
authors	Attia, Shady
year	2013
title	Achieving Informed Decision-Making using Building Performance Simulation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2013.1.021
wos	WOS:000340635300001
summary	Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to assess the effect of ZEBO and other building performance simulation (BPS) tools on three specific outcomes: (i) knowledge and satisfaction when using simulation for NZEB design; (ii) users’ decision-making attitudes and patterns, and (iii) performance robustness based on an energy analysis. The paper utilizes three design case studies comprising a framework to test the use of BPS tools. The paper provides results that shed light on the effectiveness of sensitivity analysis as an approach for informing the design decisions of NZEBs.
keywords	Decision support; early stage; design; simulation; architects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_381
id	sigradi2013_381
authors	Baltazar, Ana Paula; José dos Santos Cabral Filho; Mateus de Souza van Stralen; Guilherme Ferreira de Arruda; Estevam Quintino Gomes Junior; Laís Rodrigues Pizano; Fabiano Nardy de Moraes;
year	2013
title	Interface de Eletrônica e Objeto Interativo como Introdução ao Knowledge Based Design [Eletronic Interface and Interactive Object as Knowledge Based Design Introduction]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 608 - 612
summary	This paper discusses the evolution of an interface used to introduce eletronics in the foundation design course at the School of Architecture at Universidade Federal de Minas Gerais, Brazil. The use of this interface by the students triggers the discussion of the possibilities of new technologies in architecture and initiates a tactical learning process in which the students are responsible for the very content they are learning. This interface introduces the discussion of interactivity and indeterminism, crucial to the development of the two main works of the course: an individual interactive object and an urban interactive intervention in group.
keywords	Eletronics; Interface; Interactive object; Learning process; Mathetics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_113
id	ecaade2013_113
authors	Becker, Mirco and Rumpf, Moritz
year	2013
title	Heat-Pressure Lamination
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 643-651
doi	https://doi.org/10.52842/conf.ecaade.2013.1.643
wos	WOS:000340635300067
summary	Fabrication techniques and design potential of up-cycling plastic bags by heat-pressure lamination are explored. The material properties are tested and put into a digital design system. The main performance criteria is structure. Two design prototypes are being discussed. The first one is using a set of modular molds and a second one a techniques of inflated cushions resulting in shapes closely matching these in curved folding.
keywords	Digital-low-tech; fabrication; up-cycling; structural analysis; curved folding; design exploration.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_212
id	ecaade2013_212
authors	Beirão, José and Arrobas, Pedro
year	2013
title	Interactive Urban Parametric Design
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 291-299
doi	https://doi.org/10.52842/conf.ecaade.2013.1.291
wos	WOS:000340635300030
summary	This paper presents the use of a City Information Modeling (CIM) platform composed of a GIS platform, a SQL database, a CAD design interface and a VPI used to develop the parametric models of possible development scenarios. It calculates urban indicators and measurable design properties in order to better understand and support choices while making design decisions. Such approach improves the generation of alternative scenarios projections supported by the calculation of urban properties.
keywords	Flexible planning; parametric urban design; alternative scenarios.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_121
id	acadia13_121
authors	Beites, Steven
year	2013
title	Morphological Behavior of Shape Memory Polymers Toward a Deployable, Adaptive Architecture
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 121-128
doi	https://doi.org/10.52842/conf.acadia.2013.121
summary	Shape-memory polymers (SMPs) are an emerging class of “smart materials” that have dual-shape capability. They are able to undergo significant deformation when exposed to an external stimulus such as heat or light. SMPs have been widely investigated within the biomedicine and aerospace industries; however, their potential has yet to be explored within an architectural framework. The research presented in this paper begins an investigation into the morphological behavior ofSMPs toward a deployable, adaptive architecture. The structure’s ease of assembly, compact storage, transportability and configurable properties offer promising applications in emergency and disaster relief shelters, lightweight recreational structures and a variety of other applications in the temporary construction and aerospace industry. This paper explores the use of SMPs through the development of a dynamic actuator that links a series of interconnected panels creating overall form to a self-standing structure. The shape-shifting behavior of the SMP allows the dynamic actuator to become flexible when storage and transportability are required. Alternatively, when exposed to the appropriate temperature range, the actuator is capable of returning to its memorized state for on-site deployment. Through a series ofprototypes, this paper will provide a fundamental understanding of the SMP’s thermo-mechanicalproperties toward deployable, adaptive architecture.
keywords	next-generation technology, smart materials, shape-memory polymers, material analysis, smart assemblies, dynamic actuator, soft architecture
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_189
id	sigradi2013_189
authors	Bruscato, Underléa; Clariana Fischer Brendler; Felipe Schneider Viaro; Fábio Gonçalves Teixeira; Régio Pierre da Silva
year	2013
title	Uso da Fabricação Digital e Prototipagem no Desenvolvimento do Projeto de Produto: Análises do Produto através de Simulações Digitais [Digital Manufacture and Rapid Prototyping in Product Design Development: Product Analysis through Digital Simulation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 459 - 463
summary	The aim of this paper is to design a public facilitie using both digital manufacture and rapid prototyping design methods. These new technologies have been used in product design development by some ways: helping in the comprehension of complex geometries; used as tools for analyzing the design process, thus avoiding errors in the project. The analysis were carried out using virtual simulation tests and physical prototype in reduced scale. The prototype was manufactured using the 3D printer V-Flash in the Virtual Design Laboratory – UFRGS, where positive and negatives aspects were identified and described.
keywords	Digital manufacture; Rapid prototyping; Virtual simulation; Product design; Urban facilities
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia13_071
id	acadia13_071
authors	Burry, Jane; Salim, Flora; Williams, Mani; Anton Nielsen, Stig; Pena de Leon, Alex; Sharaidin, Kamil; Burry, Mark
year	2013
title	Understanding Heat Transfer Performance for Designing Better Façades
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 71-78
doi	https://doi.org/10.52842/conf.acadia.2013.071
summary	This early research focuses on the design of building façades to mediate external and internal thermal conditions. It explores new workflow for accessible feedback into the early design of façade systems. Specifically, this research aims to explore the level of corroboration or the gap between predictions of thermal behavior using digital modeling and simulation, and the empirical measurement of thermal behavior in physical analog models for façade design.
keywords	Tools and Interfaces: façade design, heat transfer, performance-based design, simulation, data visualization.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_201
id	sigradi2013_201
authors	Bustamante Oleart, Carlos; Paulo K. Ogino Altamirano; Ester Higueras García
year	2013
title	Estrategia Metodológica para la Visualización Digital de Patrones Aerodinámicos Presentes en la Morfología Urbana y su Incidencia en el Uso Estancial de los Espacios Públicos [Methodological Strategy for the Visualization of Aerodynamic Patterns in the Urban Morphology and their Impact on the Use of Public Spaces ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 108 - 111
summary	In relation to cities, wind is one of the less studied meteorological parameter. Constant vertical rate variations from meso scale to micro scale, altogether with strenght, direction, velocity of the urban canyon, makes the wind a complex subject of study. To achieve this, a methodological strategy that addresses the wind's multi dimensionality was raised. It was aplied to Punta Arenas, the southernmost city in the world, where most of the time winds come 90% from the same direction with speeds reaching 128 km/h. Wind's constant directional behavior allows the recognition of areodynamic phenomena produced, in the first instance, for the wind profiles influenced by the urban rugosity and then, at morphologycal level, the aerodynamic behavior of the layered fluids over the building bodies, generating a regular pattern between solids and fluids. The strong winds in cities with cold climate influence the use of public spaces, which, not being designed under this conditions, do not develop proper levels of thermal comfort.
keywords	Aerodynamics; Urban morphology; Public space; Information visualization
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_135
id	ecaade2013_135
authors	Buš, Peter
year	2013
title	Emergent Urban Strategies
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 283-290
doi	https://doi.org/10.52842/conf.ecaade.2013.1.283
wos	WOS:000340635300029
summary	This paper presents the results of partial research in the area of designing processes and methods of spatial and social interaction of multi-agent system with its environment in the city urban structure. According to the logic defined by the intrinsic rules of the simulation model of the selected area,there will be verified and tested the emergent phenomena resulting in changes in the configurations of urban structures.
keywords	Emergence; multi-agent modeling; bottom-up; city reconfiguration, collective design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_345
id	sigradi2013_345
authors	Calixto, Victor; Charles C. Vincent
year	2013
title	Arquitetura Algorítmica: Processos e Ferramentas [ Algorithmic Architecture: Processes and Tools]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 362 - 365
summary	This paper presents the results of an academic research in the field of parametric-generative design and through projective tests and processes using parametric tools and computational logic. Thus, five experiments for the region of the Terminal Bandeira Flag Square were set forth. From the urban guidelines and an object in common, it was a distinct possibility, where it was possible to analyze the advances and setbacks in the process of project development. The approach taken is an exploration of design processes that involve computational logic for formulating, exploring and creating architectural themes and its interfaces with other fields of knowledge: algorithmic architecture.
keywords	Performance-based design; Parametric modeling; Simulation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_137
id	ecaade2013_137
authors	Camporeale, Patricia
year	2013
title	Genetic Algorithms Applied to Urban Growth Optimization
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 227-236
doi	https://doi.org/10.52842/conf.ecaade.2013.2.227
wos	WOS:000340643600022
summary	This work is a research on the application of genetic algorithms (GA) to urban growth taking into account the optimization of solar envelope and sunlight in open spaces.It was considered a typical block of a Spanish grid, which is the most common subdivision of the urban land in towns situated in Argentina. Two models are compared, one in which the growth has no more limitations than building codes. The other one, in which the growth incorporates the solar radiation as a desirable parameter.This way of parameterizing configures a bottom-up method of urban growth. No top-down decisions intervenes in the growth process.This tool proves to be useful at early stages of urban planning when decisions—which will influence along the development of the city for a long time—are taken.
keywords	Genetic algorithms; solar envelope.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_220
id	caadria2013_220
authors	Chaszar, André and José Nuno Beirão
year	2013
title	Feature Recognition and Clustering for Urban Modelling – Exploration and Analysis in GIS and CAD
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 601-610
doi	https://doi.org/10.52842/conf.caadria.2013.601
wos	WOS:000351496100059
summary	In urban planning exploration and analysis assist the generation, measurement, interpretation and management of the modelled urban environments. This frequently involves categorisation of model elements and identification of element types. Such designation of elements can be achieved through attribution (e.g. ‘tagging’ or ‘layering’) or direct selection by model users. However, for large, complex models the number and arrangement of elements makes these approaches impractical in terms of time/effort and accuracy. This is particularly true of models which include substantial numbers of elements representing existing urban fabric, rather than only newly generated elements (which might be automatically attributed during the generation process). We present methods for identification and categorisation of model elements in models of existing and proposed urban agglomerations. We also suggest how these methods can enable exploration of models, discovery of identities and relationships not otherwise obvious, and acquisition of insights to the models’ structure and contents which are not captured, and may even be obscured, by manual selection or automated pre-attribution.
keywords	City information modelling, Data mining, Feature recognition, Geometric-content-based-search, Urban typologies
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: