Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
wos	WOS:000340643600049
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_039
id	ecaade2013_039
authors	Papadonikolaki, Eleni; Koutamanis, Alexander and Wamelink, J. W. F. (Hans)
year	2013
title	Attaining Performance with Building Information Modelling
doi	https://doi.org/10.52842/conf.ecaade.2013.2.475
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 475-483
summary	The paper presents the findings of a systematic literature review of approximately 200 scientific sources. It is designed with the aim to identify the current benefits and factors of high performance in Architecture, Engineering, Construction (AEC) since the introduction of Building Information Modelling (BIM). We formed and confirmed two main propositions associating the performance of the AEC to the use of BIM. The mapping of the current impact and benefits of BIM showed that the role of the managers, suppliers, owners and authorities is underestimated, as well as the initiation and use stage of project development. At the same time, the performance in the AEC industry can be improved by an array of possibilities where IT research and policy-making authorities contribute – from establishing new collaboration protocols until improving existing or creating new BIM tools.
wos	WOS:000340643600048
keywords	Building Information Modelling (BIM); Architecture, Engineering and Construction (AEC); supply chain management; life-cycle phases; stakeholders.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2013_090
id	ecaade2013_090
authors	Wilkinson, Samuel; Hanna, Sean; Hesselgren, Lars and Mueller, Volker
year	2013
title	Inductive Aerodynamics
doi	https://doi.org/10.52842/conf.ecaade.2013.2.039
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 39-48
summary	A novel approach is presented to predict wind pressure on tall buildings for early-stage generative design exploration and optimisation. The method provides instantaneous surface pressure data, reducing performance feedback time whilst maintaining accuracy. This is achieved through the use of a machine learning algorithm trained on procedurally generated towers and steady-state CFD simulation to evaluate the training set of models. Local shape features are then calculated for every vertex in each model, and a regression function is generated as a mapping between this shape description and wind pressure. We present a background literature review, general approach, and results for a number of cases of increasing complexity.
wos	WOS:000340643600003
keywords	Machine learning; CFD; tall buildings; wind loads; procedural modelling.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_291
id	ecaade2013_291
authors	Semlali, Anis; Tidafi, Temy and Parisel, Claude
year	2013
title	Action Based Approach to Archaeological Reconstruction Projects: Case of the Karnak Temple in Egypt
doi	https://doi.org/10.52842/conf.ecaade.2013.2.325
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 325-332
summary	The proposed paper deals with a numerical approach that could better assist the archaeologist in the archaeological reconstruction projects. The goal of our research is to explore and study the use of computerized tools in archaeological reconstruction projects of monumental architecture in order to propose new ways in which such technology can be used.
wos	WOS:000340643600033
keywords	Architectural heritage; archaeological reconstruction; action-based modeling; architecture and complexity.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_085
id	caadria2013_085
authors	Spaeth, A. Benjamin
year	2013
title	Designer’s Dilemma – The Precision of Numerical Simulations in Design Systems
doi	https://doi.org/10.52842/conf.caadria.2013.665
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 665-673
summary	Performance based design systems are characterised through the use of performance related evaluation methods or by providing design environments which are restricting the design space according to performance criteria. The performance of a design can be evaluated by numerical simulations. With the use of numerical simulations a fundamental dilemma appears: the precision implied in numerical simulations and the imprecision of the design process itself are systematic contradictions. User control or user interaction in open systems places the user into charge of the imprecision required by the design process. In closed systems, as the below described evolutionary system, methods of imprecision have to be integrated i.e. into the precise simulation based evaluation procedure. Through tolerant selection methods and the gradual evaluation of individuals the rigid and precise system can be guided towards a design system rather than an optimisation system. Due to technical requirements which are related both to the fact of using computer systems but also to the systematic conditions implied to simulations the use of the tolerant selection methods is limited.
wos	WOS:000351496100065
keywords	Simulation based design, Generative design, Creativity, Acoustics
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_255
id	ecaade2013_255
authors	Stavrakantonaki, Marina
year	2013
title	Daylight Performance Simulations and 3D Modeling in BIM and non-BIM Tools
doi	https://doi.org/10.52842/conf.ecaade.2013.2.535
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 535-542
summary	The fusion between building assessment and design can lead to better informed design decisions. Performance oriented design is better supported through the use of interoperable file formats for data exchange between BIM and non-BIM tools. At the same time, the parameters that influence the calculation during a performative assessment are no longer a purely engineering problem, since 3D modeling is of primary importance in defining the numerical output. The role of the designer along with the selection of the tools becomes all more relevant in this direction. A framework is presented hereby, which can be used for the selection between different BIM tools for daylight assessment. An insight is also given on the major parameters that can affect the outcome and on the obstacles that were experienced in four case-studies in relation to data exchange and information flow.
wos	WOS:000340643600054
keywords	Performance simulations; parameters; interoperability; daylight.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia13_367
id	acadia13_367
authors	Søndergaard, Asbjørn; Amir, Oded; Knauss, Michael
year	2013
title	Topology optimization and digital assembly of advanced space-frame structures
doi	https://doi.org/10.52842/conf.acadia.2013.367
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 367-378
summary	This paper presents a novel method for the integrated design, optimization and fabrication of space-frame structures in an autonomous, digital process. Comparative numerical studies are presented, demonstrating achievable mass reduction by application of the method by comparison to equivalent to normative space truss designs and dimensions. As such, a principal digital fabrication and assembly scheme is developed, where an architectural design methodology relative to the described process is established, and the proposed process is demonstrated through scaled digital fabrication experiments.
keywords	space-frame structures, topology optimization, robotic assembly, digital fabrication, steel
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_162
id	ecaade2013_162
authors	Bayraktar, Mehmet Emin and Ça_da_, Gülen
year	2013
title	Fuzzy Layout Planner
doi	https://doi.org/10.52842/conf.ecaade.2013.1.375
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 375-381
summary	This study presents a digital architectural design tool named “Fuzzy Layout Planner” that helps architects create two dimensional sketchy footprints for their design. The purpose of the tool is to extend limits of early design thinking. It uses fuzzy modeling techniques to adapt the ambiguous design phase. There are several commands in this digital tool to generate and modify layouts. Users can create, move, combine sketchy bubbles to form bigger footprints and see them in action dynamically. The tool offers a manual creation process.
wos	WOS:000340635300039
keywords	Architectural representation; digital design tools, early design, fuzzy modelling.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_126
id	ecaade2013_126
authors	Castro e Costa, Eduardo and Duarte, José Pinto
year	2013
title	Tableware Shape Grammar
doi	https://doi.org/10.52842/conf.ecaade.2013.2.635
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 635-644
summary	Mass customization is pointed as a means of improving a company’s competitiveness, which is an essential trait in Europe’s economic situation of today. This paper reports a mockup implementation of the mass customization paradigm to ceramic tableware design, through the use of shape grammars, parametric modelling and rapid prototyping. Focus is emphasized on the initial development of a parametric shape grammar as a design system, operating on curved surfaces and solids. Mapping operations are suggested for dealing with the formal complexity of these shapes. This initial academic experiment poses as a first step into the development of a mass customization system that is expected to meet industry standards.
wos	WOS:000340643600066
keywords	Mass customization; ceramic tableware; generative design; shape grammars; rapid prototyping.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2013_198
id	caadria2013_198
authors	Chee Zong Jie and Patrick Janssen
year	2013
title	Exploration of Urban Street Patterns – Multi-Criteria Evolutionary Optimisation Using Axial Line Analysis
doi	https://doi.org/10.52842/conf.caadria.2013.695
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 695-704
summary	In urban design, researchers have developed techniques to automate both the generation and evaluation of urban street patterns. In most cases, these approaches are investigated in isolation from one another. Recently, a number of researchers have attempted to couple these approaches, in order to enable larger numbers of street patterns to be generated and evaluated in an iterative loop. However, to date, the possibility of fully automating the generative-evaluative loop using optimisation algorithms has not been explored. This research proposes an explorative design method in which urban street patterns can be optimised for multiple conflicting performance criteria. The optimisation process uses evolutionary algorithms to evolve populations of design variants by iteratively applying three key procedures: development, evaluation, and feedback. For development, a generative technique is proposed for constructing street patterns. For evaluation, various performance measures are used, including in particular Space Syntax based Axial Line analysis. For feedback, a Pareto-ranking algorithm is used that ranks street patterns according to multiple criteria. The proposed method is demonstrated using an abstract scenario in which orthogonal street patterns are evolved for a small urban area.
wos	WOS:000351496100068
keywords	Axial line analysis, Generative modelling, Evolutionary algorithms, Decision chain encoding, Urban street patterns
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2013_001
id	caadria2013_001
authors	Doelling, Max C. and Ben Jastram
year	2013
title	Daylight Prototypes: From Simulation Data to Four-Dimensional Artefact-Physical Metrics Models in Sustainable Design Education
doi	https://doi.org/10.52842/conf.caadria.2013.159
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 159-168
summary	The increasing use of building performance simulation in architectural design enriches digital models and derived prototyping geometries with performance data that makes them analytically powerful artefacts serving sustainable design. In our class “Parametric Design”, students perform concurrent thermal and daylight optimization during the architectural ideation process, employing digital simulation tools, and also utilize rapid prototyping techniques to produce process artefacts and whole-building analysis models with climate-based day-light metrics physically embedded. Simulation metrics are merged with prototyping geometries to be output on a colour-capable Zprinter; the resultant hybrid artefacts simultaneously allow three-dimensional formal as well as whole-year daylight performance evaluation, rendering analysis scope four-dimensional. They embody a specific epistemological type that we compare to other model instances and posit to be an example of multivalent representation, a formal class that aids knowledge accretion in workflows and allows designers to gain a physically reframed understanding of geometry-performance relationships.
wos	WOS:000351496100016
keywords	Rapid prototyping, Building performance modelling, Daylight simulation, Physical data models, Design representation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2013_015
id	caadria2013_015
authors	Dritsas, Stylianos and Kang Shua Yeo
year	2013
title	Undrawable Architecture – Digital Workflows for the Conservation of Heritage Buildings and the Discovery of Digital Tectonic
doi	https://doi.org/10.52842/conf.caadria.2013.833
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 833-842
summary	This paper presents a datacentric perspective to historical building conservation using digital media. In particular we explore a workflow based on large volumes digital data acquired via 3D scanning technology, virtual restoration using 3D modelling and physical artefact reconstruction using 3D printing technology. We offer an alternative perspective in contrast to the prevalent approach of reverse engineering or geometric rationalization via parametric design technology; highlight the research and design opportunities as well as the challenges of the approach.
wos	WOS:000351496100086
keywords	Digital conservation, 3D scanning, Rapid prototyping
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013r_004
id	ecaade2013r_004
authors	Figueiredo, B.; Costa, Eduardo C.; Duarte, José P.; Krüger, M.
year	2013
title	Digital Temples: a shape grammar to generate sacred buildings according to Alberti’s theory
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 63-70
summary	The research presented further is part of the Digital Alberti research project, which aims to determine the influence of Alberti’s treatise on Architecture, De re aedificatoria, on the Portuguese Renaissance architecture, through the use of a computational framework. One of the project tasks entailed the translation of the treatise’s textual descriptions concerning the morphological, proportional and algorithmic principles of the sacred buildings into a shape grammar. Subsequently a computational model was developed, in order to proceed to the derivation of examples of the same language. This article discusses the use of analytical shape grammars to undertake an architectural analysis, as well as the fact of the source of this grammar and correspondent architectural language to be a text instead of a set of buildings and designs. It reviews the methodology to implement the shape grammar and describes the several stages of development, following the interpretation of treatise into a consistent set of shape rules, by defining their spatial relations, parameters and conditions. It also reviews the implementation of this knowledge into a generative parametric computer program through visual programming language Grasshopper.
keywords	Shape Grammars; Parametric Modelling; Generative Design; Alberti; Classical Architecture
email
last changed	2013/10/07 19:08

_id	ecaade2013_104
id	ecaade2013_104
authors	Figueiredo, Bruno; Duarte, José Pinto and Krüger, Mário
year	2013
title	Albertian Grammatical Transformations
doi	https://doi.org/10.52842/conf.ecaade.2013.2.687
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 687-696
summary	This paper presents a research on the use of shape grammars as an analytical tool in the history of architecture. It evolves within a broader project called Digital Alberti, whose goal is to determine the influence of De re aedificatoria treatise on Portuguese Renaissance architecture, making use of a computational framework (Krüger et al., 2011).Previous work was concerned with the development of a shape grammar for generating sacred buildings according to the rules textually described in the treatise. This work describes the transformation of the treatise grammar into another grammar that can also account for the generation of Alberti’s built work.
wos	WOS:000340643600071
keywords	Shape grammars; parametric modelling; generative design; Alberti; classical architecture.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_002
id	ecaade2013_002
authors	Hanzl, Ma_gorzata
year	2013
title	Modelling of Public Spaces
doi	https://doi.org/10.52842/conf.ecaade.2013.1.319
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 319-327
summary	The relationship between the material settings and situational belonging to a more general notion of the culture of a given community remains the subject of inquiry of at least two scientific disciplines: anthropology and urban morphology studies. In this study an assessment of the various modelling platforms is performed with the objective of finding the most efficient method which allows the description of the semiotic features of urbanscapes. The ideal system should link the parametric definition of urban geometry with the high flexibility of data input and easy manipulation. In order to enable culture related analyses of urbanscapes, analyses should be performed which refers to the semiotics of morphological structures in the detailed scale of urban enclosure, which are streets or squares. Some elements of the proposed method of index key analyses are explained as one possible solution for the problems posed.
wos	WOS:000340635300033
keywords	Urban design; urban morphology; anthropology; parametric modelling; outdoor space.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2014_044
id	caadria2014_044
authors	Huang, Alvin; Stephen Lewis and Jason Gillette
year	2014
title	Pure Tension: Intuition, Engineering & Fabrication
doi	https://doi.org/10.52842/conf.caadria.2014.171
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 171–180
summary	The "PURE Tension" Pavilion is a lightweight, rapidly deployable, tensioned membrane structure and portable charging station commissioned by Volvo Car Italia to showcase the new Volvo V60 Hybrid Electric Diesel car. Officially launched in Milan, Italy in October 2013, this experimental structure was developed through a process of rigorous research and development that investigated methods of associative modelling, dynamic mesh relaxation, geometric rationalization, solar incidence analysis, membrane panelling, and material performance. It is an experimental structure that, similar to a concept car, is a working prototype that speculates on the potential future of personal mobility and alternative energy sources for transportation while also exploring digital design methodologies and innovative structural solutions. This paper will illustrate the design, development and fabrication processes involved in realizing this structure.
keywords	Form-finding; dynamic-mesh relaxation; geometric rationalisation; patterning, digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: