Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_009
id	ecaade2014_009
authors	Marie Davidova, Martin Šichman and Martin Gsandtner
year	2014
title	Material Performance of Solid Wood:Paresite, The Environmental Summer Pavilion
doi	https://doi.org/10.52842/conf.ecaade.2014.2.139
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 139-144
summary	The Paresite - The Environmental Summer Pavilion designed for reSITE festival, is a möbius shaped structure, built from torsed pine wood planks in triangular grid with half cm thin pine wood triangular sheets that provide shadow and evaporate moisture in dry weather. The sheets, cut in a tangential section, interact with humidity by warping themselves, allowing air circulation for the evaporation in arid conditions. The design was accomplished in Grasshopper for Rhino in combination with Rhino and afterwards digitally fabricated. This interdisciplinary project involved students from the Architectural Institute in Prague (ARCHIP) and the students of the Faculty of Forestry and Wood Sciences at the Czech University of Life Sciences Prague (FLD CZU). The goal was to design and build a pavilion from a solid pine wood in order to analyse its material properties and reactions to the environment and to accommodate functions for reSITE festival. The design was prepared within half term studio course and completed in June 2013 on Karlovo Square in Prague where it hosted1600 visitors during festival weekend.
wos	WOS:000361385100014
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2014_011
id	ecaade2014_011
authors	Marie Davidova
year	2014
title	Ray 2:The Material Performance of Solid Wood Based Screen
doi	https://doi.org/10.52842/conf.ecaade.2014.2.153
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 153-158
summary	The wood - humidity interaction of solid wood has been tested through generations on Norwegian traditional panelling. This concept has been further explored by Michael Hensel and Steffen Reichert with Achim Menges on plywood and laminates in basic research. Plywood or laminates are better programmable but they are less sustainable due to the use of glue. This research focused on predicting the performance of solid wood in tangential section which is applied to humidity-temperature responsive screen for industrial production. With the method Systems Oriented Design, the research evaluated data from material science, forestry, meteorology, biology, chemistry and the production market. Themethod was introduced by Birger Sevaldson in 2007 with the argument that the changes in our globalized world and the need for sustainability demands an increase of the complexity of the design process. (Sevaldson 2013)Several samples has been tested for its environmental interaction. The data has been integrated in parametric models that tested the overall systems. Based on the simulations, the most suitable concept has been prototyped and measured for its performance. This lead to another sampling of the material whose data are the basis for another prototype. Ray 2 is an environmental responsive screen that is airing the structure in dry weather, while closing up when the humidity level is high, not allowing the moisture inside.
wos	WOS:000361385100016
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2013_262
id	ecaade2013_262
authors	Rolando, Andrea and D’Uva, Domenico
year	2013
title	Hyperdomes
doi	https://doi.org/10.52842/conf.ecaade.2013.2.315
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 315-324
summary	The development of new shapes in architecture has deeply influenced the current perception of the built environment. The analysis of the processes behind this evolution is, therefore, of great interest. At least two well known factors, influencing this development, may be pointed out: the great improvement of digital tools and the tendency toward building distinctiveness.In particular, the innovation of digital tools such as parametric modeling is resulting in an overall diffusion of complex shapes, and the phenomenon is also evident in a clear expressionistic search for architectural singularity, that some might consider as a negative effect of globalization trends.Though, if we can consider as a positive result the fact that parameterization allows a deeper control over design factors in terms of reference to cultural, historical and physical context, at the same time such control possibilities are sometimes so stark to be even auto-referential, stepping over site-specific parameterization, to create unusual shapes just for the sake of complexity.The ever-growing diffusion of generative design processes is in fact going to transform niche procedures, frequently limited to temporary decontextualized structures, into an architectural complexification as an end in itself.The hypothesis of this paper is to demonstrate that site-specific parametrization can be considered as a tool able to translate intentions into shape; it is necessary, for this aim, the widening of the meaning of the word singularity.
wos	WOS:000340643600032
keywords	Urban environment; distinctiveness; non-standard roofing structures.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
doi	https://doi.org/10.52842/conf.caadria.2013
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2013_034
id	caadria2013_034
authors	Arenas, Ubaldo and José Manuel Falcón
year	2013
title	ALOPS Constructive Systems – Towards the Design and Fabrication of Unsupervised Learning Construction Systems
doi	https://doi.org/10.52842/conf.caadria.2013.905
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 905-914
summary	In this paper we explore the concept and design guidelines for an Autonomous Learning Oriented Proto System (ALOPS), a construction system designed to enhance its own performance through time. Our research has been focused on the fabrication of a prototype for a porous wall system which reacts to light intensities by closing or opening its apertures. Taking that aim, we used a combination of robotics, programing, and material behaviour to endow the system with the capacity to record reactions towards encountered sets of conditions during its active energy periods, allowing the system to use this knowledge database to evolve autonomously by feeding this information back into the computation process. This approach in construction systems opens up the architectural design processes to address the creation of digital memory structures rather than complex algorithms in order to operate specific functions. With this development, the architect could think of architectures constantly evolving by learning from their environments as well as of users forming symbiotic and behavioural bonds with the emergent spatial personalities, thus affecting the underpinning relationships between architecture, user and context.
wos	WOS:000351496100093
keywords	erformance architecture, Unsupervised learning, Machine learning
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_011
id	ecaade2013_011
authors	Dritsas, Stylianos; Kalvo, Raul and Sevtsuk, Andres
year	2013
title	Packing Optimization for Digital Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2013.1.655
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 655-664
summary	We present a design-computation method of design-to-production automation and optimization in digital fabrication; an algorithmic process minimizing material use, reducing fabrication time and improving production costs of complex architectural form. Our system compacts structural elements of variable dimensions within fixed-size sheets of stock material, revisiting a classical challenge known as the two-dimensional bin-packing problem. We demonstrate improvements in performance using our heuristic metric, an approach with potential for a wider range of architectural and engineering design-built digital fabrication applications, and discuss the challenges of constructing free-form design efficiently using operational research methodologies.
wos	WOS:000340635300068
keywords	Design computation; digital fabrication; automation; optimization.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_184
id	ecaade2013_184
authors	Fraguada, Luis; Girot, Christophe and Melsom, James
year	2013
title	Ambient Terrain
doi	https://doi.org/10.52842/conf.ecaade.2013.1.433
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 433-438
summary	‘Ambient Terrain’ explores the application of large-scale, sensor-based site analysis. The research develops various techniques dealing with the logging, storage, retrieval, analysis, and representation of sensor and image-based data. These techniques could be utilized in concert with traditional site preparation and site information gathering processes, and could arguably serve to reevaluate the site preparation process altogether in a manner which not only focuses on terrestrial data, but also on metrics which are dynamic and multidimensional.The research proposes direct applications for urban space and the built environment, in the modes of site appraisal, design and the generation of new spatial strategies.
wos	WOS:000340635300045
keywords	Unmanned Aerial Vehicle; sensor data logging, ambient site analysis, UAV data collection; photogrammetry, stereophotogrammetry.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2013_038
id	ecaade2013_038
authors	Gallas, Mohamed-Anis and Halin, Gilles
year	2013
title	DaylightGen: From Daylight Intentions to Architectural Solutions
doi	https://doi.org/10.52842/conf.ecaade.2013.2.107
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 107-116
summary	This paper addresses the integration of the daylight effect during the early stages of the architectural design process. The first part presents a design assistance method that helps designers to characterize their daylight intentions and materialize them in architectural solutions. In this part, we describe the implementation of this method in a design tool, denoted DaylightGen, the implemented process and the different system components. The second part of this paper focuses on the investigation of the potential of the proposed method in design process. It was evaluated in educational design case study. This part integrates the experimentation process and his results.
wos	WOS:000340643600010
keywords	Computer aided architectural design; intentions oriented design; generative and parametric design tool; daylight simulation tool; design tool experimentation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2013_217
id	caadria2013_217
authors	Kolodziej, Przemyslaw and Jozef Rak
year	2013
title	Responsive Building Envelope as a Material System of Autonomous Agents
doi	https://doi.org/10.52842/conf.caadria.2013.945
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 945-954
summary	The paper represents the concept of an abstract model of the Responsive Building Envelope (RBE), founded on pre-programmed material’s behaviour. The assumed model of the responsive building envelope is based on the idea of material autonomous agents that control default parameters of building’s energies like ventilation, humidity, light volume, radiation, temperature, etc., by materials’ geometry deformation. The agent is a material system, built with the Electroactive Polymers (EAPs) actuators which react to the environment’s fluctuations continuously and independently from other agents. The model of a responsive envelope is a cluster of self-reliant units which control the primary characteristic of the building environment in an analogous way to the homeostasis system of a living organism. By decentralization the system becomes more stable and reliable. The CFD simulation was created from the schematic model of the RBE’s performance to test the presented design concepts.
wos	WOS:000351496100097
keywords	Responsive system, Autonomous agent, Electroactive Polymers (EAPs), Homeostatic cycle, CFD simulation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia13_253
id	acadia13_253
authors	Krieg, Oliver David; Menges, Achim
year	2013
title	HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
doi	https://doi.org/10.52842/conf.acadia.2013.023
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 23-260
summary	The paper presents current research into architectural potentials of robotic fabrication in wood construction based on elastically bent timber sheets with robotically fabricated finger joints. Current developments in computational design and digital fabrication propose an integrative design approach contrary to classical, hierarchical architectural design processes. Architecture related fields, such as material science, engineering and fabrication have been seen as separate disciplines in a linear design process since the Industrialization era. However, current research in computational design reveals the potentials of their integration and interconnection for the development of material-oriented and performance-based architectural design.In the first part, the paper discusses the potentials of robotic fabrication based on its extended design space. The robot’s high degree of kinematic freedom opens up the possibility of developing complex and highly performative mono-material connections for wood plate structures. In the second part, the integration of material behavior is presented. Through the development of robotically fabricated, curved finger joints, that interlock elastically bent plywood sheets, a bending-active construction system is being developed (Figure 1,Figure 2). In the third part, the system’s architectural application and related constructional performance is discussed.
keywords	Robotic Fabrication; Finger Joints; Material Computation; Wood Construction; Computational Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2013_106
id	ecaade2013_106
authors	Nielsen, Stig Anton
year	2013
title	Physical Form Finding by Embedded Sensors
doi	https://doi.org/10.52842/conf.ecaade.2013.1.413
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 413-421
summary	The paper concerns the potential of sensors as architectural design tools in different spatial and temporal scales. In particular, the focus is on how sensors are able to operate in a constantly changing environment, and how sensors might nurture an intuition of otherwise non perceivable aspects of performance within architecture.The study discus two set-ups. Firstly; an onsite sensor reading of changing performance between a refurbished and a classic Arabic house; the study is in large spatial and temporal scale. Secondly; a model design setup where the performance of the same Arabic house typology is tested in small spatial and small temporal scale. The study shows how large scale architecture can be investigated through the use of sensor chaining and how simple sensors can be implemented in a design task in order to give insight to certain aspects of performance. The paper concludes with a discussion on a more general sensor strategy for changing environments and design setups.
wos	WOS:000340635300043
keywords	Air flow; sensors; sensor chaining; tippu tip; form finding.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
wos	WOS:000340635300027
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_151
id	caadria2013_151
authors	Simeone, Davide; Yehuda E. Kalay and Davide Schaumann
year	2013
title	Using Game-Like Narrative to Simulate Human Behaviour in Built Environments
doi	https://doi.org/10.52842/conf.caadria.2013.199
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 199-208
summary	Predicting future users’ behaviour and their activities in a building is a highly complex task that designers have to face during the design process. Despite its importance, few methods exist that can predict and help evaluate this type of building performance during the design process itself. Simulative approaches are gradually overcoming this shortcoming, but at present their application is limited to the representation of specific occurrences and behavioural performance aspects, such as emergency egress. Based on current developments in the video game industry, our research aims to establish a new approach to human behaviour simulation in built environments, based on a clear and reliable representation of the use processes occurring in a building. At its core is simulation based on the notion of events, defined as active entities on their own, comprised of space, people, and activities. These events entities are structured into collections called narratives, which represent and allow the simulation of the step-by-step performing of activities by users in a built environment.
wos	WOS:000351496100020
keywords	Human behaviour simulation, Building-user interaction, Prediction and evaluation, Event model, Game narrative
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia13_217
id	acadia13_217
authors	Steinfeld, Kyle; Levitt, Brendon
year	2013
title	Dhour:A bioclimatic information design prototyping toolkit
doi	https://doi.org/10.52842/conf.acadia.2013.217
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 217-226
summary	The qualification of predicted building performance through quantitative methods is as challenging as it is crucial to the meeting of the mandate to design buildings better adapted to their bioclimatic conditions. Methods for the visualization of building performance data that have found success in the past struggle in the contemporary context of large computational data sets. While application of building performance simulation to architectural design is highly context-sensitive, existing approaches to the visualization of simulation results are generalized and provide the designer with a preconfigured battery of visualizations that are, by definition, not calibrated to specific questions or contexts. This paper presents a new prototyping visualization toolkit, developed for the Grasshopper (Rutten 2013) visual programming environment, which enables the situational development of information graphics. By enabling more nuanced and customizable views of complex data, the software described here offers designers an exploratory framework in contrast to the highly directed tools currently available. Two case studies of the application of this toolkit are then presented, the results of which suggest that a more open framework for the production of visualization graphics can more effectively assist in the design of buildings responsive to their bioclimatic environments.
keywords	tools and interfaces, energy and performance, modeling and analysis, simulation tools, data visualization, information design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2013.2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2013.1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia13_379
id	acadia13_379
authors	Tamke, Martin; Stasiuk, David; Ramsgard Thomsen, Mette
year	2013
title	The Rise – Material Behaviour in Generative Design
doi	https://doi.org/10.52842/conf.acadia.2013.379
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 379-388
summary	The research-based installation, The Rise, is led by the concept of a growing architecture able to sense and dynamically adapt to its environment as it grows into form while continuously reacting to its own material performance and behavioural constraints. This process is enabled through the careful integration of digital simulation techniques with multi-hierarchical generative design approaches. Aggregations of variably sized bundles of rattan core multiply, bend, branch and recombine into a distributed assembly that manifests an alternative to traditional structural systems. The hybrid approach links a material system with simulation and the iterative generation of geometry through a process of calibration at different stages of design. The project leverages emerging computational strategies for growth in a model for an architectural practice that engages the complexity and interdependencies that characterise a contemporary design practice.
keywords	complex systems, material behaviour, simulation, generative design, growth patterns, environmental aware design systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

For more results click below: