Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_033
id	caadria2013_033
authors	Nguyen, Danny D. and M. Hank Haeusler
year	2013
title	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.caadria.2013.365
wos	WOS:000351496100036
summary	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software The research presented in this paper investigates the need for an equivalent of architectural drawings for urban interaction design in an architectural scale in order to communicate interaction design intentions to design participants and clients through using state of the art computer, gaming and sensor technologies. The paper discusses two projects (a) Blur Building, as a large scale interaction design project executed through an experienced team and (b) presents as student design project coordinated by the researchers as a reference project. Both projects in this paper are discussed and evaluated from an Urban Interaction Design point of view. This paper emphasizes the significance for establishing ‘drawing’ equivalents for urban interaction design, discussing representation of ideas in architectural design; followed by outlining existing methods of interactive design representation, such as storyboards to then introduce current advancements in gaming environments. The following paper introduces a framework for future research projects that will design, deploy and evaluate of prototypes as a communication platform combining physical sensing devices in combination with gaming engines to enable a digital / physical hybrid. This would allow designers and clients to test, evaluate and improve urban interactions in a design phase prior to completing the project.
keywords	Spatial design, Human-computing interfacing, Interactive architecture, Smart environments, Sensor technology
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2013_328
id	sigradi2013_328
authors	Bustos, Gabriela
year	2013
title	El Método 7.1, Re-acción en Multi-re-forma: Re-generación Ética en la Tecnología Digital (TD) + Diseño Arquitectónico (DA) [Method 7.1, Re-action in Multi-re-form: Ethical Re-generation of Digital Technology (DT) + Architectural Design (AD)]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 54 - 57
summary	The goal of this article is to conceptualize and structure a theoretical proposed framed of ethics in digital technology in architectural design. The methodological vision of this proposal is one of complex epistemology, which seeks to understand applied ethics in a multicultural reality and the digital processes that reformulate contemporary architectural vision. The proposed “Method 7.1: Re-action in Multi-re-form” is based on Edgar Morin’s “Method 6, Ethics”, and Victor Martin’s “Applied Ethics.” The Method 7.1 is formed by seven ethical dimensions that constitute a pattern of complex thought that systematizes the values for the production of techno-architecture.
keywords	Complex Ethics; Digital Technology (DT); Architectural Design (AD); Re-action; Multi-reform
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2013_118
id	cf2013_118
authors	Dritsas, Stylianos and Mark Goulthorpe
year	2013
title	An Automated Robotic Manufacturing Process: For the Thermoplastic Panel Building Technology
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 118-129.
summary	This paper presents the design-computation digital fabrication research for a thermoplastic panel technology for housing applications; a high-performance, low-cost building product based on parametric design methodology, glass fiber reinforced composite materials, and numerically controlled robotic fabrication processes. We present a highly integrated schematic design to production workflow, and discuss the potential and challenges of robotic prototyping and fabrication.
keywords	Digital Fabrication, Architectural Robotics, Computer Aided Manufacturing, Building Composites, Thermoplastic Manufacturing
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_011
id	ecaade2013_011
authors	Dritsas, Stylianos; Kalvo, Raul and Sevtsuk, Andres
year	2013
title	Packing Optimization for Digital Fabrication
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 655-664
doi	https://doi.org/10.52842/conf.ecaade.2013.1.655
wos	WOS:000340635300068
summary	We present a design-computation method of design-to-production automation and optimization in digital fabrication; an algorithmic process minimizing material use, reducing fabrication time and improving production costs of complex architectural form. Our system compacts structural elements of variable dimensions within fixed-size sheets of stock material, revisiting a classical challenge known as the two-dimensional bin-packing problem. We demonstrate improvements in performance using our heuristic metric, an approach with potential for a wider range of architectural and engineering design-built digital fabrication applications, and discuss the challenges of constructing free-form design efficiently using operational research methodologies.
keywords	Design computation; digital fabrication; automation; optimization.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_006
id	ecaade2013_006
authors	Junk, Stefan and Côté, Samantha
year	2013
title	New Methods for the Rapid Prototyping of Architectural Models
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 397-403
doi	https://doi.org/10.52842/conf.ecaade.2013.2.397
wos	WOS:000340643600040
summary	Various Rapid Prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. Finally, two case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Additional information about manufacturing time and costs of the architectural models in the two case studies is given.
keywords	Architectural model, CAAD, Rapid Prototyping, 3D printing, architectural detail.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2013_405
id	sigradi2013_405
authors	Klinger, Kevin R.
year	2013
title	Synchronizing Decisions: Design-through-Production Methodology
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 420 - 423
summary	This paper demonstrates the process-oriented decision-making developed through multiple years of case studies developed in partnership with the Institute for Digital Fabrication at Ball State University in concert with industry partnerships. Crucial steps in the process of developing solutions will be used to illustrate potentials for informing new strategies for future projects. A catalogue of the diverse issues inherent in a design-through-production project will be included to serve as a road map, and enlighten the human decision-making factor in these technological processes.
keywords	Digital fabrication; Design-through-production; Performance architecture; Industry collaboration; Digital exchange
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2013_026
id	ecaade2013_026
authors	Kucukoglu, J. Gozde and Colakoglu, Birgul
year	2013
title	Algorithmic Form Generation for Crochet Technique
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 273-278
doi	https://doi.org/10.52842/conf.ecaade.2013.2.273
wos	WOS:000340643600027
summary	In architecture use of generative computation suggests a possibility of rethinking the form finding process. In order to generate form, one method could be predefining first the production technique and constraining the form by the rules of it. In this study crochet-knitting technique is chosen as a production technique. To explore various forms developed through this technique; a computational model, which the behavior of crochet-knitted surface is embedded into, is developed. This paper explains the process of decoding the behavior of a crochet-knitted surface for a computational model in order to extract the crochet-knitting patterns of complex geometrical surfaces.
keywords	Form generation; crochet technique; hyperbolic geometry; decoding rule
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2013_071
id	caadria2013_071
authors	Lloret Kristensen, Ena; Fabio Gramazio, Matthias Kohler and Silke Langenberg
year	2013
title	Complex Concrete Constructions – Merging Existing Casting Techniques with Digital Fabrication
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 613-622
doi	https://doi.org/10.52842/conf.caadria.2013.613
wos	WOS:000351496100060
summary	In the course of the 20th century, architectural construction has gone through intense innovation in its material, engineering and design, radically transforming the way buildings were and are conceived. Technological and industrial advances enabled and challenged architects, engineers and constructors to build increasingly complex architectural structures from concrete. Computer-Aided Design and Manufacturing (CAD/CAM) techniques have, more recently, rejuvenated and increased the possibilities of realising ever more complex geometries. Reinforced concrete is often chosen for such structures since almost any shape can be achieve when poured into a formwork. However, designs generated with digital tools tend to have limited relation to the efficient modes of production typically used in contemporary concrete construction. A large gap has emerged between the technology in architectural design and the building industry, so that few efficient solutions exist for the production of geometrically complex structures in concrete. This paper focuses on the capabilities and efficiency of existing casting techniques both with static and dynamic formwork which, when combined with digital fabrication, allow innovative fabrication approaches to be taken. Particular focus is placed on slipforming, an approved and efficient construction technique, which until now is unexplored in conjunction with digital fabrication.
keywords	Complex concrete structures, Casting techniques, Formwork, Slipforming, Digital fabrication, Smart dynamic casting
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2013_43
id	sigradi2013_43
authors	Massara Rocha, Bruno; Mario Victor Marques Margotto; Victor Nolasco Correa Malheiros
year	2013
title	Princípios e Protótipos Improvisacionais nas Interfaces entre o Design, a Arquitetura e a Arte Digital [Improvisational Principles and Prototypes in the Interface of Design, Architecture and Digital Art]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 489 - 492
summary	In this paper we present final results of interface design processes developed regarding a low-tech-oriented procedures supported by computer vision and physical computing techniques. All the prototypes presented were developed in academic context in a few workshops grounded in interdisciplinary approaches between art, design and architecture. There were applied artistic creative processes such as improvisation, reprograming and post-production in the development of innovative users interfaces from the perspective of re-appropriation of existent objects and its cultural nature.
keywords	Experimental prototypes; Computer vision; Visual computing; Reprogramming; Interfaces
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2013r_017
id	ecaade2013r_017
authors	Meghna, Saiqa I.; Chowdhury, Suvro S.
year	2013
title	Contextual customization of design process. Design through the digital and the material
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 205-216
summary	In contemporary world, digital technologies have initiated new architectural languages and have eased the way to communicate them directly from initial design phase to production facilities, allowing for the construction of complex geometries with the use of ever evolving techniques and tools. When the emergence of a substance depends on the material behavior, the design interest shifts towards the ‘formation’ instead of the ‘final form’. Regarding these the design procedures will be discussed from the premise where architecture will be perceived through an evolution process that deals with the coherent variables of elements and shifting parameters within a context. However, there are crucial questions about its application in the contexts which have lower access to contemporary technologies although digital technology has already influenced almost every aspects of the culture of the respective context. Besides, the huge production cost has limited its adaptability in many under developed and developing countries where the construction field relies mainly on traditional and low-tech methods. The paper is an effort to give attention on exploration of the new-found freedoms of material computation in close connection with the respective context by inventing new design processes, material applications and custom devices. It is the time to experiment with flexible, mobile and low-cost fabrication methods applicable to different scenarios while achieving the complexity of the contemporary architectural ge¬ometries. Thus an equal focus has to be given to speculate about projects that are site-specific, custom¬ized and adapted to local climatic conditions and technical know-how, in areas that traditionally have limited access to new technologies.
keywords	Complex geometries, material behavior, custom devices, low-cost fabrication, design process
email
last changed	2013/10/07 19:08

_id	sigradi2013_391
id	sigradi2013_391
authors	Miotto, Juliano; Regiane Trevisan Pupo
year	2013
title	Fabricação Digital na Arquitetura Efêmera: Aplicação em Feiras Comerciais [Digital Fabrication in Ephemeral Architecture: Application in Business Fairs]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 464 - 467
summary	This paper presents a discussion about the ephemeral architecture, the insertion of the Digital Fabrication in the design process and its contribution to the transformation of these spaces. The paper presents an experience of the use of this technology in the production of some Businesses Fairs. In the case reported, the Digital Fabrication allowed greater freedom in the generation of form, facilitating the visualization of the project as a whole and consequently aiding in the compatibility, anticipating possible failures before fabrication and assembly.
keywords	Ephemeral architecture; Digital fabrication; Business fairs
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia13_347
id	acadia13_347
authors	Sabin, Jenny E.
year	2013
title	myThread Pavilion: Generative Fabrication in Knitting Processes
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 347-354
doi	https://doi.org/10.52842/conf.acadia.2013.347
summary	Advancements in weaving, knitting and braiding technologies have brought to surface high-tech and high- performance composite fabrics. These products have historically infiltrated the aerospace, automobile, sports and marine industries, but architecture has not yet fully benefitted from these lightweight freeform surface structures. myThread, a commission from the Nike FlyKnit Collective, features knitted textile structures at the scale of a pavilion. The evolution of digital tools in architecture has prompted new techniques of fabrication alongside new understandings in the organization of material through its properties and potential for assemblage. No longer privileging column, beam and arch, our definition of architectural tectonics has broadened alongside advancements made in computational design. Internal geometries inherent to natural forms, whose complexity could not be computed with the human mind alone, may now be explored synthetically through mathematics and generative systems. Textiles offer architecture a robust design process whereby computational techniques, pattern manipulation, material production and fabrication are explored as an interconnected loop that may feed back upon itself in no particular linear fashion. The myThread Pavilion integrates emerging technologies in design through the materialization of dynamic data sets generated by the human body engaged in sport and movement activities in the city.
keywords	next generation technology, textiles, responsive material, knitting, data visualization, generative design, bio-data
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:59

_id	ecaade2013_128
id	ecaade2013_128
authors	Symeonidou, Ioanna; Hirschberg, Urs and Kaftan, Martin
year	2013
title	Designing the Negative
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 683-691
doi	https://doi.org/10.52842/conf.ecaade.2013.1.683
wos	WOS:000340635300071
summary	Designing the Negative was the title of a Master Studio that took place at the Institute of Architecture and Media of Graz University of Technology during the summer semester of 2012. Students designed and fabricated prototypes of customized concrete formwork as part of their studio assignment. The studio theme forced students to think about digital fabrication with parametric tools in a hands-on fashion. Using robotic technology and hot-wire cutting, students worked with the robot’s constraints (size of the robot’s arm, robot’s axis and tool’s restrictions) to design complex curved elements that could serve as formwork (the negative) for cast concrete elements (the positive). The students were asked to design a production strategy for their cast concrete elements as well as the application of said elements in an architectural scheme. The student projects confirmed the value of a pedagogy that takes on research-relevant questions in an interdisciplinary studio setting and engages students in a process that is best described as digital crafting: it simultaneously addressed the conceptual and technical as well as the material and tactile aspects of digital fabrication and design.
keywords	Digital fabrication; customization; concrete; hot-wire cutting; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2013_116
id	ecaade2013_116
authors	Yoshida, Hironori and In, Jessica
year	2013
title	Rethinking Prototyping: Scan to Production
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 665-672
doi	https://doi.org/10.52842/conf.ecaade.2013.1.665
wos	WOS:000340635300069
summary	This paper examines how digital scanning techniques can be utilised in the digital fabrication of hybrid materials. It explores how ‘imperfections’ discovered in natural materials can inform unique design solutions. In the first part of this paper, the technical scan-to-production process is explained. Secondly, the paper discusses this new production model against current standardised production processes. Third, the paper introduces ways in which the proposed research method can be incorporated into emerging design practices through three realised projects – Digitized Grain, STP @ Milano Design Week, and Timber X-Ray Scanning; Finally, an assessment of the Research through Design Production over the course of these projects details the key changes in each stage of the STP process.
keywords	Digital fabrication; material production; scanning.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2014_192
id	sigradi2014_192
authors	Angulo, Antonieta H.; Guillermo P. Vasquez de Velasco
year	2014
title	Immersive Simulation in Instructional Design Studios
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 236-240
summary	The paper describes the implementation of “immersive simulation studios” at Ball State University and their impact on architectural design education. This implementation is part of our on-going research efforts aimed to expand conventionally available digital design tools by including state-of-the-art virtual reality (VR) technology in design studios. Two consecutive immersive simulation studios were held during the academic year 2013-2014; we tested teaching/learning methodologies for effectively using the VR simulation to support the students in the design of architectural spaces. The results make reference to the learning outcomes from these implementations and the level of satisfaction of students using the tool.
keywords	Architectural Education; Design Studios; Virtual Reality; Immersive Simulation; Head-Mounted Display
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_068
id	ecaade2013_068
authors	Attia, Shady and Andersen, Marilyne
year	2013
title	Measuring the Usability, Efficiency and Effectiveness of CAAD Tools and Applications
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 147-155
doi	https://doi.org/10.52842/conf.ecaade.2013.1.147
wos	WOS:000340635300014
summary	Computer Aided Architectural Design (CAAD) decisions and judgments have been at the heart of architectural design practice. Despite the increasing popularity of computer aided design applications, measuring the decision making of designers empirically remains elusive. Past research claiming usefulness of the CAD has relied largely on anecdotal or case studies that are vulnerable to bias. The study reviews results of prior investigations. The relatively few laboratory experiments report hardly any empirical results regarding the measurement of CAD decision making. The study provides an overview of the literature of existing measurement methods that have been used in psychology and neuroscience to assess individual variations in design making, and highlight these different measurement methods’ strengths and weaknesses. We conclude with a comparative evaluation of the different measures and provide suggestions regarding their constructive use in building realistic theories of designer’s decision making measurement.
keywords	Measurement; usability; efficiency; effectiveness; CAAD.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_121
id	acadia13_121
authors	Beites, Steven
year	2013
title	Morphological Behavior of Shape Memory Polymers Toward a Deployable, Adaptive Architecture
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 121-128
doi	https://doi.org/10.52842/conf.acadia.2013.121
summary	Shape-memory polymers (SMPs) are an emerging class of “smart materials” that have dual-shape capability. They are able to undergo significant deformation when exposed to an external stimulus such as heat or light. SMPs have been widely investigated within the biomedicine and aerospace industries; however, their potential has yet to be explored within an architectural framework. The research presented in this paper begins an investigation into the morphological behavior ofSMPs toward a deployable, adaptive architecture. The structure’s ease of assembly, compact storage, transportability and configurable properties offer promising applications in emergency and disaster relief shelters, lightweight recreational structures and a variety of other applications in the temporary construction and aerospace industry. This paper explores the use of SMPs through the development of a dynamic actuator that links a series of interconnected panels creating overall form to a self-standing structure. The shape-shifting behavior of the SMP allows the dynamic actuator to become flexible when storage and transportability are required. Alternatively, when exposed to the appropriate temperature range, the actuator is capable of returning to its memorized state for on-site deployment. Through a series ofprototypes, this paper will provide a fundamental understanding of the SMP’s thermo-mechanicalproperties toward deployable, adaptive architecture.
keywords	next-generation technology, smart materials, shape-memory polymers, material analysis, smart assemblies, dynamic actuator, soft architecture
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

For more results click below: