Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 598

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_253
id	acadia13_253
authors	Krieg, Oliver David; Menges, Achim
year	2013
title	HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 23-260
doi	https://doi.org/10.52842/conf.acadia.2013.023
summary	The paper presents current research into architectural potentials of robotic fabrication in wood construction based on elastically bent timber sheets with robotically fabricated finger joints. Current developments in computational design and digital fabrication propose an integrative design approach contrary to classical, hierarchical architectural design processes. Architecture related fields, such as material science, engineering and fabrication have been seen as separate disciplines in a linear design process since the Industrialization era. However, current research in computational design reveals the potentials of their integration and interconnection for the development of material-oriented and performance-based architectural design.In the first part, the paper discusses the potentials of robotic fabrication based on its extended design space. The robot’s high degree of kinematic freedom opens up the possibility of developing complex and highly performative mono-material connections for wood plate structures. In the second part, the integration of material behavior is presented. Through the development of robotically fabricated, curved finger joints, that interlock elastically bent plywood sheets, a bending-active construction system is being developed (Figure 1,Figure 2). In the third part, the system’s architectural application and related constructional performance is discussed.
keywords	Robotic Fabrication; Finger Joints; Material Computation; Wood Construction; Computational Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	acadia20_114p
id	acadia20_114p
authors	Zivkovic, Sasa; Havener, Brian; Battaglia, Christopher
year	2020
title	Log Knot
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 114-119.
summary	Log Knot, developed by the Robotic Construction Laboratory (RCL) at Cornell University, is a robotically fabricated architectural installation that establishes a method for variable compound timber curvature creation utilizing both regular and irregular roundwood geometries. Moreover, the project develops methods for minimal formwork assembly and moment force optimization of customized mortise and tenon joints. Following the logic of a figure-8 knot, the project consists of an infinite loop of roundwood, curving three-dimensionally along its length. There are a variety of techniques to generate single curvature in wood structures – such as steam bending (Wright et al., 2013) or glue lamination (Issa and Kmeid, 2005) – but only a few techniques to generate complex curvature from raw material within a single wooden structural element exist. To construct complex curvature, the research team developed a simple method that can easily be replicated. First, the log is compartmentalized, establishing a series of discrete parts. Second, the parts are reconfigured into a complex curvature “whole” by carefully manipulating the assembly angles and joints between the logs. Timber components reconfigured in such a manner can either follow planar curvature profiles or spatial compound curvature profiles. Based on knowledge gained from the initial joinery tests, the research team developed a custom tri-fold mortise and tenon joint, which is self-supportive during assembly and able to resist bending in multiple directions. Using the tri-fold mortise and tenon joint, a number of full-scale prototypes were created to test the structural capacity of the overall assembly. Various structural optimization protocols are deployed in the Log Knot project. While the global knot form is derived from spatial considerations – albeit within the structurally sound framework of a closed-loop knot structure – the project is structurally optimized at a local level, closely calibrating structural cross-sections, joinery details, and joint rotation in relation to prevailing load conditions.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	ecaade2014_009
id	ecaade2014_009
authors	Marie Davidova, Martin Šichman and Martin Gsandtner
year	2014
title	Material Performance of Solid Wood:Paresite, The Environmental Summer Pavilion
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 139-144
doi	https://doi.org/10.52842/conf.ecaade.2014.2.139
wos	WOS:000361385100014
summary	The Paresite - The Environmental Summer Pavilion designed for reSITE festival, is a möbius shaped structure, built from torsed pine wood planks in triangular grid with half cm thin pine wood triangular sheets that provide shadow and evaporate moisture in dry weather. The sheets, cut in a tangential section, interact with humidity by warping themselves, allowing air circulation for the evaporation in arid conditions. The design was accomplished in Grasshopper for Rhino in combination with Rhino and afterwards digitally fabricated. This interdisciplinary project involved students from the Architectural Institute in Prague (ARCHIP) and the students of the Faculty of Forestry and Wood Sciences at the Czech University of Life Sciences Prague (FLD CZU). The goal was to design and build a pavilion from a solid pine wood in order to analyse its material properties and reactions to the environment and to accommodate functions for reSITE festival. The design was prepared within half term studio course and completed in June 2013 on Karlovo Square in Prague where it hosted1600 visitors during festival weekend.
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2014_159
id	ecaade2014_159
authors	Leyla Yunis, Ond_ej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn and Achim Menges
year	2014
title	Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2014.1.423
wos	WOS:000361384700042
summary	Research pavilions can serve as architectural scale demonstrations for the materialization of experimental forms and structures. Pavilions seek to prove and change methods of design and construction mechanisms in order to achieve desires such as material efficiency, novel spatial qualities and performative needs. The case of the ICD/ITKE Research Pavilion 2013-14 highlights the use of fiber composites in order to achieve a core-less filament winding modular system from bio-inspired lightweight structures through robotic fabrication. This paper describes the multi-disciplinary design and construction process of this pavilion that created a structure of out 36 unique components.
keywords	Bio-inspired; fiber composites; multi-disciplinary design; robotic fabrication; modular system construction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia14_219
id	acadia14_219
authors	Moritz Dörstelmann, Moritz; Prado, Marshall; Parascho, Stefana; Knippers, Jan; Menges, Achim
year	2014
title	Integrative computational design methodologies for modular architectural fiber composite morphologies
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 219-228
doi	https://doi.org/10.52842/conf.acadia.2014.219
summary	This paper describes how computational design methodologies can serve as an integrative tool within a multidisciplinary design project. The topic is discussed based on the design and fabrication process for modular architectural fiber composite morphologies applied and developed in the ICD/ITKE Research Pavilion 2013-14.
keywords	integrative computational design, digital fabrication and construction, robotic fabrication reinforced fiber composite structures, biomimicry and biological models in design, light-weight construction, multidisciplinary design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2013_151
id	ecaade2013_151
authors	Weigele, Jakob; Schloz, Manuel; Schwinn, Tobias; Reichert, Steffen; LaMagna, Riccardo; Waimer, Frédéric; Knippers, Jan and Menges, Achim
year	2013
title	Fibrous Morphologies
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 549-558
doi	https://doi.org/10.52842/conf.ecaade.2013.1.549
wos	WOS:000340635300057
summary	Living organisms have evolved effective structural solutions in response to the inherent constraints of their respective environments through a process of morphological adaptation. Given the fact that the majority of natural load bearing materials are fibrous composites, the authors suggest the analysis of appropriate biological role models as a promising strategy for informing the application of fibre reinforced polymers (FRP) in architecture. In this paper the authors present a biomimetic design methodology for seamless large-scale FRP structures involving the analysis of the exoskeletons of Arthropoda with regards to structural performance criteria, the development of a custom robotic filament winding process, and the translation of biological and fabricational principles into the architectural domain through physical prototyping and the development of custom digital tools. The resulting performative material system is evaluated in a full-scale research pavilion.
keywords	Biomimetics; computational design; fibre-reinforced composites; prototyping; robotic fabrication.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2013_159
id	cf2013_159
authors	Celani, Gabriela; Vilson Zattera, Marcelo Fernandes de Oliveira, and Jorge Vicente Lopes da Silva
year	2013
title	“Seeing” with the Hands: Teaching Architecture for the Visually-Impaired with Digitally-Fabricated Scale Models
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 159-166.
summary	Accessibility of information for the visually-impaired has greatly benefited from information and communication technologies (ICT’s) in the past decades. However, the interpretation of images by the blind still represents a challenge. Bidimensional representations can be understood by those who have seen at least sometime in their lives but they are too abstract for those with congenital blindness, for whom three-dimensional representations are more effective, especially during the conceptualization phase, when children are still forming mental images of the world. Ideally, educators who work with the visually-impaired should be able to produce custom 3D models as they are needed for the explanation of concepts. This paper presents an undergoing project that aims at developing a protocol for making 3D technologies technically and economically available to them.
keywords	Tactile models, rapid prototyping, architectural concepts
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	acadia13_043
id	acadia13_043
authors	Michalatos, Panagiotis; Payne, Andrew O.
year	2013
title	Working with Multi-scale Material Distributions
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 43-50
doi	https://doi.org/10.52842/conf.acadia.2013.043
summary	At present, computer aided design (CAD) software has proven ill equipped to manage the spatial variations in material properties. Most digital design packages employ a surface modeling paradigm where a solid object is that which is enclosed by a set of boundaries (known as boundary representations or “B-rep” for short). In surface models, material representations are often treated as homogenous and discrete. Yet, natural materials are capable of structures where the variability of material within a volume is defined at a multiplicity of scales and according to various functional criteria. With the advent of new 3D printing techniques, a new possibility emerges—allowing new multi-material composite objects to be fabricated in a single build volume with a high degree of dimensional accuracy and repeatability. However, a big limitation facing complex high resolution digital fabrication comes from the software’s inability to represent or handle material variability. This paper proposes a new digital interface for working with multi-material distributions at a variety of scales using a rasterization process. Beyond the immediate benefit of precise graduated control over the material distribution within a 3D printed volume, our interface opens new creative opportunities by enabling the use of existing image processing techniques (such as filtering, mapping, etc.) which can be applied to three-dimensional voxel fields. Examples are provided which explore the potential of multi-scale material distributions.
keywords	next generation technology, multi-material 3D printing, digital interfaces, voxel fields, rasterization
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	caadria2022_74
id	caadria2022_74
authors	Mazza, Domenico, Kocaturk, Tuba and Kaljevic, Sofija
year	2022
title	Geelong Digital Outdoor Museum (GDOM) - Photogrammetry as the Surface for a Portable Museum
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 677-686
doi	https://doi.org/10.52842/conf.caadria.2022.1.677
summary	This paper presents the development and evaluation of the Geelong Digital Outdoor Museum (GDOM) prototype accessible at https://gdom.mindlab.cloud. GDOM is a portable museum‚our novel adaptation of the distributed museum model (Stuedahl & Lowe, 2013) which uses mobile devices to present museum collections attached to physical sites. Our prototype defines a way for intangible heritage associated with tangible landscapes to be accessible via personal digital devices using 360 3D scanned digital replicas of physical landscapes (photogrammetric digital models). Our work aligns with efforts set out in the UN Sustainable Development Goal 11 (SDG 11) to safeguard cultural and natural heritage, by openly disseminating the heritage of physical sites seamlessly through the landscape. Using a research by design methodology we delivered our prototype as a modular web-based platform that leveraged the Matterport digital model platform. We qualitatively evaluated the prototype's usability and future development opportunities with 32 front-end users and 13 potential stakeholders. We received a wide gamut of responses that included: users feeling empowered by the greater accessibility, users finding a welcome common ground with comparable physical experiences, and users and potential stakeholders seeing the potential to re-create physical world experiences with modifications to the digital model along with on-site activation. Our potential stakeholders suggested ways in which GDOM could be integrated into the arts, education, and tourism to widen its utility and applicability. In future we see design potential in breaking out of the static presentation of the digital model and expanding our portable museum experience to work on-site as a complement to the remote experience. However, we recognise the way in which on-site activation integrate into users' typical activities can be tangential (McGookin et al., 2019) and this would necessitate further investigation into how to best integrate the experience on-site.
keywords	Cultural Heritage, Intangible Heritage, Digital Heritage, Web Platform, 3D Scanning, Photogrammetry, Digital model, Portable Museum, Distributed Museum, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2013_081
id	ecaade2013_081
authors	Baharlou, Ehsan and Menges, Achim
year	2013
title	Generative Agent-Based Design Computation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 165-174
doi	https://doi.org/10.52842/conf.ecaade.2013.2.165
wos	WOS:000340643600016
summary	Agent-based systems have been widely investigated in simulation and modeling. In this paper, it is proposed that agent-based systems can also be developed as generative systems, in which different aspects of performative design can be defined as separate drivers in a proper computational framework. In this manner constrained generating procedures (CGP’s) are studied to integrate the discrete design processes into one system. Subsequently, this generative agent-based design tool is accompanied with generating and constraining mechanism which are informed by material characteristics and fabrication constraints, bringing to the forefront emergent complexity.
keywords	Computational design; agent-based system; robotic fabrication; constrained generating procedures (CGP’s).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_415
id	acadia13_415
authors	Briscoe, Danelle; Prentice, Reg
year	2013
title	Reconfiguring Frit: Serendipity in Digital Design Processes
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 415-416
doi	https://doi.org/10.52842/conf.acadia.2013.415
summary	This paper presents a case study of the fritted glass design completed for the Interactive Corporation Building (IAC) in New York, New York—a key building designed by Gehry Partners, LLP—and proposes further research into a “glitch” in the production of the frit pattern that could be refined into legitimate design processes.
keywords	frit pattern; Building Information Modeling; glitch
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:54

_id	acadia13_033
id	acadia13_033
authors	Correa, David; David Krieg, Oliver; Menges, Achim; Reichert, Steffen; Rinderspacher, Katja
year	2013
title	HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 33-42
doi	https://doi.org/10.52842/conf.acadia.2013.033
summary	This paper focuses on the implementation of a computational design and robotic fabrication method that integrates the elastic and hygroscopic behavior of wood as active drivers in the design process, using the material’s differentiated characteristics as its main capacity. The project builds on previous work by the authors, furthering their research on the formal and performative transfer of such behaviors into informed architectural systems. Wood’s fibrous structure, relatively low stiffness and high structural capacity are instrumentalized into self-forming mechanisms through conical elastic deformation, while the same organic makeup and corresponding hygroscopic properties have also been programmed, formally articulated and integrated into a climate responsive architectural system. This research will be presented alongside a full-scale architectural project (Figure 1, Figure 2).
keywords	computational design; robotic fabrication; wood construction; elastic bending; hygroscopic actuation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	caadria2014_044
id	caadria2014_044
authors	Huang, Alvin; Stephen Lewis and Jason Gillette
year	2014
title	Pure Tension: Intuition, Engineering & Fabrication
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 171–180
doi	https://doi.org/10.52842/conf.caadria.2014.171
summary	The "PURE Tension" Pavilion is a lightweight, rapidly deployable, tensioned membrane structure and portable charging station commissioned by Volvo Car Italia to showcase the new Volvo V60 Hybrid Electric Diesel car. Officially launched in Milan, Italy in October 2013, this experimental structure was developed through a process of rigorous research and development that investigated methods of associative modelling, dynamic mesh relaxation, geometric rationalization, solar incidence analysis, membrane panelling, and material performance. It is an experimental structure that, similar to a concept car, is a working prototype that speculates on the potential future of personal mobility and alternative energy sources for transportation while also exploring digital design methodologies and innovative structural solutions. This paper will illustrate the design, development and fabrication processes involved in realizing this structure.
keywords	Form-finding; dynamic-mesh relaxation; geometric rationalisation; patterning, digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2014_150
id	caadria2014_150
authors	Knapp, Chris; Jonathan Neslon and Michael Parsons
year	2014
title	Constructing Atmospheres
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 149–158
doi	https://doi.org/10.52842/conf.caadria.2014.149
summary	This paper documents and critically reflects upon the design, development, fabrication, and implementation of three pavilion projects developed during 2013-14. The core investigation of this work is the production of architectural spaces characterized by a quality of enveloping, diffuse, visual and spatial atmospheres. The principal activity of the research is aimed at refining methods for software-based exploration of formal complexities and the subsequent need to control variability and efficiency in fabrication output, using Grasshopper for Rhino to develop customized definitions particular to each specific project scenario. Linking the projects together are issues of scale, resolution of effect, and intent to move from disparate assemblies of structure and skin toward composite, manifold construction techniques that address multiple concerns (gravity, bracing, affect, etc) with a minimum of assembly. A material palette common to the current vernacular of CNC-based projects such as plywood, plastics, and other sheet materials is utilised. This work is invested in extending the possibilities of the architect and architecture as a discipline, extrapolating the workflow from these successive projects to the speculative impact of the work upon emerging possibilities of architectural construction and craft.
keywords	3d modelling; Digital fabrication; Rhinoceros; Grasshopper; Tessellation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2014_099
id	caadria2014_099
authors	Koh, Immanuel
year	2014
title	Generative-Glass: Prototyping Generative Architectural Systems with Artisan’s Glass-Blowing and Automated Digital Fabrication Techniques
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 389–398
doi	https://doi.org/10.52842/conf.caadria.2014.389
summary	This paper aims to investigate the ways in which the traditional processes of glassblowing techniques could be incorporated with contemporary generative design processes in the realization of new novel architectural systems. Pedagogical issues on how such prototyping processes could be better integrated within architectural education are also discussed. With the use of algorithmic design methodology to generate/visualize the components assembled in multitudes and digital fabrication machineries to produce the necessary moulds/jigs/tools/connection joints, a series of 5 different glass prototypes have been actualized at the scale of 1:1 or otherwise. The work is the direct outcome of a new programme founded and directed by the author as part of the Architectural Association (AA) School of Architecture‘s Visiting School in 2013. Part 1 briefly introduces the specific agenda and how the corresponding structure of the programme is designed to facilitate the glass research work done concurrently at the digital fabrication laboratory and glassblowing studio. Part 2 would systematically discuss in detail the design of each of the 5 main glass prototypes made, presented alongside photographs and diagrams to illustrate the prototypes’ respective assembly and fabrication logics. Part 3 would evaluate the work done and project plans for the next iteration of the research in 2014.
keywords	Glass; Digital Fabrication; Generative Design; Traditional Crafts
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia13_311
id	acadia13_311
authors	Maxwell, Iain; Pigram, David; McGee, Wes
year	2013
title	The Novel Stones of Venice: The Marching Cube Algorithm as a Strategy for Managing Mass-customisation
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 311-318
doi	https://doi.org/10.52842/conf.acadia.2013.311
summary	The Marching Cube (MC) algorithm is a simple procedural routine for the surface representation of three- dimensional scalar fields. While much has been written of the algorithm’s efficiencies and adaptive nature within the domain of computer graphics and imaging, little has been explored within the context of architectural geometry and fabrication. This paper posits a novel implementation of the MC algorithm coupled with robotic fabrication (RF) techniques, to realise an open-ended design method that approaches mass-customisation as the unique geometric distortion of a finite set of topologically consistent families of tectonic elements.The disciplinary consequences of this and similar methods that intimately couple algorithmic design techniques with robotic fabrication are discussed. These include the re-affirmation or expansion of the role of the architect as master builder that is enabled by challenging Leon Battista Alberti’s 15th Century division between design concept and building.The method and its disciplinary potentials are illustrated through the description of an installation built by the authors for the Australian Pavilion at the Venice Biennale. Clouds of Venice serves as a case study for a new integrated mode of production, one that increases the quality and number of feedback relations between design, matter and making.
keywords	tools and interfaces, mass-customisation, robotic fabrication, algorithmic architecture, marching cube, digital fabrication
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2013_278
id	ecaade2013_278
authors	Oxman, Neri; Laucks, Jared; Kayser, Markus; Gonzalez Uribe, Carlos David and Duro-Royo, Jorge
year	2013
title	Biological Computation for Digital Design and Fabrication
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 585-594
doi	https://doi.org/10.52842/conf.ecaade.2013.1.585
wos	WOS:000340635300061
summary	The formation of non-woven fibre structures generated by the Bombyx mori silkworm is explored as a computational approach for shape and material optimization. Biological case studies are presented and a design approach for the use of silkworms as entities that can “compute” fibrous material organization is given in the context of an architectural design installation. We demonstrate that in the absence of vertical axes the silkworm can spin flat silk patches of variable shape and density. We present experiments suggesting sufficient correlation between topographical surface features, spinning geometry and fibre density. The research represents a scalable approach for optimization-driven fibre-based structural design and suggests a biology-driven strategy for material computation.
keywords	Biologically computed digital fabrication; robotic fabrication; finite element analysis; optimization; CNC weaving.
series	eCAADe
email
last changed	2022/06/07 08:00

For more results click below: