Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_093
id	acadia13_093
authors	Konis, Kyle
year	2013
title	Wiring to the Sky
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 93-100
doi	https://doi.org/10.52842/conf.acadia.2013.093
summary	As architectural design methodologies focus increasingly on the production of dynamic form, the means to actuate these forms, the input that fuels parametric processes, analytical form-generating techniques and responsive controls is of primary concern. In the virtual test beds where systems are developed, inputs are often ad-hoc, based on crude assumptions of the environment, or disconnected from the physical environment entirely.Inverting a technique originally developed to illuminate virtual objects with light captured from real (physical) environments, this project explores image-based lighting as a means of detailed environmental light sensing. The objective of the project is to demonstrate the application of High Dynamic Range (HDR) image data acquired continuously in the physical world as signal input to inform, actuate and evaluate responsive solar control and daylighting systems. As a proof of concept, a virtual hemispherical dome consisting of 145 apertures is controlled to respond in real time to continuous image-based measurements of sky luminance, seeking a defined set of daylighting and solar control objectives. The paper concludes by discussing the implications of incorporating real-world environmental data in the development of dynamic form.
keywords	complex systems, image-based lighting, environmental adaptation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	sigradi2013_212
id	sigradi2013_212
authors	Angulo, Antonieta; Guillermo Vásquez de Velasco
year	2013
title	Immersive Simulation of Architectural Spatial Experiences
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 495 - 499
summary	The paper describes our research efforts seeking to assess the potential use of immersive simulation through virtual reality (VR) environments as a tool for aiding the design of architectural spatial experiences. By making use of a fully implemented HMD-based VR Environment in our school at Ball State University we conducted a controlled experiment with novice design students. After the evaluation of results of the experiment we have found evidence of the positive impact of the use of the system in design education. We will further investigate on the best practices to incorporate its pervasive use based on high-impact simplified methods.
keywords	Spatial experience; Immersive simulation; Head mounted display; Virtual reality; Design education
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201311303
id	ijac201311303
authors	Beorkrem, Chris; Mitchell McGregor, Igor Polyakov, Nicole Desimini
year	2013
title	Sphere Mapping: a method for responsive surface rationalization
source	International Journal of Architectural Computing vol. 11 - no. 3, 319-330
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a parametric surface. The research attempts to propose a method for attaching fixed sized objects to a free flowing surface or "blanket." The model can be used to interrogate a series of shapes and forms with the same componentry. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe and his students developed a series of studies in material and surface properties. By utilizing a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Rhino Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe's original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
series	journal
last changed	2019/05/24 09:55

_id	acadia13_347
id	acadia13_347
authors	Sabin, Jenny E.
year	2013
title	myThread Pavilion: Generative Fabrication in Knitting Processes
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 347-354
doi	https://doi.org/10.52842/conf.acadia.2013.347
summary	Advancements in weaving, knitting and braiding technologies have brought to surface high-tech and high- performance composite fabrics. These products have historically infiltrated the aerospace, automobile, sports and marine industries, but architecture has not yet fully benefitted from these lightweight freeform surface structures. myThread, a commission from the Nike FlyKnit Collective, features knitted textile structures at the scale of a pavilion. The evolution of digital tools in architecture has prompted new techniques of fabrication alongside new understandings in the organization of material through its properties and potential for assemblage. No longer privileging column, beam and arch, our definition of architectural tectonics has broadened alongside advancements made in computational design. Internal geometries inherent to natural forms, whose complexity could not be computed with the human mind alone, may now be explored synthetically through mathematics and generative systems. Textiles offer architecture a robust design process whereby computational techniques, pattern manipulation, material production and fabrication are explored as an interconnected loop that may feed back upon itself in no particular linear fashion. The myThread Pavilion integrates emerging technologies in design through the materialization of dynamic data sets generated by the human body engaged in sport and movement activities in the city.
keywords	next generation technology, textiles, responsive material, knitting, data visualization, generative design, bio-data
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:59

_id	ecaade2014_001
id	ecaade2014_001
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 2
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 632 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.1
summary	This is the second volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The second volume of the proceedings contains 65 papers grouped under nine sub-themes (Generative Design- Parametric Modelling, Material, Collaboration and Participation, VR, Spatial Analysis, Shape, Form and Geometry 2, BIM, Design Tool 2 and Smart and Responsive Design).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2013r_006
id	ecaade2013r_006
authors	Neto, Pedro L.; Vieira, Andrea P.; Moreira, Bruno; Ribeiro, Lígia
year	2013
title	A blended-learning approach in CAAD. Enhancing an architectural design studio experience by using collaborative web applications.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 83-94
summary	This paper is the result of a research project started in 2007 in our architecture school which aimed to adopt a Blended-Learning approach in teaching CAAD to 3rd year architecture students, while integrating the knowledge produced by our R&D Unit on architectural representation and communication techniques and web applications. We present our main conclusions regarding this strategy’s results and the web applications involved to understand if they acted like catalysts for engaging students with their learning process and for promoting a better communication between them and their teachers. The article shows how this strategy created new forms of interaction making communication between teachers and students easier and giving the latter an active role in the learning process. We start with an introduction to CAAD’s pedagogical strategy; we then describe the strategy and model applied to several case studies and the materials and learning tools used. Finally, we’ll discuss the most significant results and draw the main conclusions. The results highlight how the learning process coming from the Blended-Learning strategy and the use of complementary web applications strengthens the student’s and teacher’s capacity to work in a close relationship while maintaining the student’s active role in the learning process.
keywords	Blended-learning; education in architecture; communication and representation; collaborative teaching and learning; design studio environment
email
last changed	2013/10/07 19:08

_id	caadria2013_011
id	caadria2013_011
authors	Sousa, José Pedro and João Pedro Xavier
year	2013
title	Symmetry-Based Generative Design: A Teaching Experiment
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 303-312
doi	https://doi.org/10.52842/conf.caadria.2013.303
wos	WOS:000351496100030
summary	Throughout history, symmetry has been widely explored as a geometric strategy to conceive architectural forms and spaces. Nonetheless, its concept has changed and expanded overtime, and its design exploration does not mean anymore the generation of simple and predictable solutions. By framing in history this idea, the present paper discusses the relevance of exploring symmetry in architectural design today, by means of computational design and fabrication processes. It confirms the emergence of a renewed interest in the topic based on two main ideas: On the one hand, symmetry-based design supports the generation of unique and apparent complex solutions out of simple geometric rules, in a bottom-up fashion. On the other hand, despite this intricacy, it assures modularity in the design components, which can bring benefits at the construction level. As the background for testing and illustrating its theoretical arguments, this paper describes the work produced in the Constructive Geometry course at FAUP.
keywords	Geometry, Symmetry, Computational design, Digital manufacturing, Education
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2021_412
id	caadria2021_412
authors	Estrina, Tatiana, Hui, Vincent and Ma, Lena
year	2021
title	The Digital Design Build - Modes of Experiential Learning in the Pandemic Era
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 41-50
doi	https://doi.org/10.52842/conf.caadria.2021.2.041
summary	In recent years, academia has deviated from the lecture-based model to a hybridized system of instruction and experiential learning. Experiential learning aids students in understanding collaborative processes in architectural praxis and exposes them to engaging learning opportunities, a critical component of architectural studio education (Nijholt et al. 2013). During the COVID-19 outbreak, students are barred from accessing on-campus facilities. This causes a redevelopment of curricular delivery and disrupts experiential learning which heavily relies on in-person interaction. It is imperative for instructors to retain experiential learning in the transition to virtual instruction. This paper explores experiential learning within virtual platforms for instruction. Through outlining the implementation of technologies, capitalizing on connectivity, and maximizing opportunity for digital problem solving, the authors posit a framework that other educators may adopt. The paper concludes with a case study of a virtual design-build project, and the various techniques implemented in retaining experiential learning during the pandemic.
keywords	Pedagogy; Experiential learning; Social connectivity; Resilience; Disrupted education
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2014_136
id	caadria2014_136
authors	Ham, Jeremy J. and Marc Aurel Schnabel
year	2014
title	Comparisons in Representational Media Use in Design Studios between Hong Kong and Australia
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 781–790
doi	https://doi.org/10.52842/conf.caadria.2014.781
summary	Representational media – analogue, physical, digital, or virtual – are employed by students in the conception, development and presentation. In 2013 a survey at two architectural schools was conducted to study the current representational media use in design studios. The survey examined the role digital and physical media play in students’ design work and how students use the various media to generate and communicate their designs. This study presents its importance through the shift in architectural education whereby digital tools are not taught per se any longer, however expected to be mastered throughout the course. Yet students’ learning experiences are strongly dependant on the successful acquisition of skills and its transfer to deep learning. Especially architectural design studios build upon the premises that rerepresentation leads to a better acquisition of knowledge. Architectural educators may use the study to revisit their studio and reposition the role of media as well as align learning outcomes, deliverables and communication tools with the actual working- and learning-styles of students.
keywords	Representational media; design studio; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
wos	WOS:000361384700036
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2013_379
id	sigradi2013_379
authors	Monteiro de Menezes, Alexandre; Maria de Lourdes Silva Viana; Mário Lucio Pereira Junior; Sérgio Ricardo Palhares
year	2013
title	CAD e BIM: Evolução ou Revolução na Aprovação de Projetos de Edificações nas Instâncias Legais? [CAD and BIM: Evolution or Revolution in Building Projects Approval in Legal Instances?]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 302 - 306
summary	This research compared CAD and BIM, seeking to identify evolution, or revolution, in the field of building projects, focusing on municipal approval. The research sought to understand municipal, state and federal normative to approve architectural projects and studied CAD and BIM in the light of the technical documents generation submitted for building projects evaluation and approval. The aim was to compare the efficiency of 3D model for the analysis of projects in municipalities. The results identify adequacies and inadequacies on both platforms, but also formulate suggestions for improvements in the process of evaluation and approval of projects by local governments.
keywords	BIM; Architectural design; Projects approval; Graphic communication; Buildings construction
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email
last changed	2013/10/07 19:08

_id	acadia13_033
id	acadia13_033
authors	Correa, David; David Krieg, Oliver; Menges, Achim; Reichert, Steffen; Rinderspacher, Katja
year	2013
title	HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 33-42
doi	https://doi.org/10.52842/conf.acadia.2013.033
summary	This paper focuses on the implementation of a computational design and robotic fabrication method that integrates the elastic and hygroscopic behavior of wood as active drivers in the design process, using the material’s differentiated characteristics as its main capacity. The project builds on previous work by the authors, furthering their research on the formal and performative transfer of such behaviors into informed architectural systems. Wood’s fibrous structure, relatively low stiffness and high structural capacity are instrumentalized into self-forming mechanisms through conical elastic deformation, while the same organic makeup and corresponding hygroscopic properties have also been programmed, formally articulated and integrated into a climate responsive architectural system. This research will be presented alongside a full-scale architectural project (Figure 1, Figure 2).
keywords	computational design; robotic fabrication; wood construction; elastic bending; hygroscopic actuation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia13_243
id	acadia13_243
authors	Khoo, Chin Koi; Salim, Flora
year	2013
title	Responsive Materiality for Morphing Architectural Skins
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 243-252
doi	https://doi.org/10.52842/conf.acadia.2013.243
summary	This paper presents the design of a novel material system with sensing, form-changing and luminous capacities for responsive and kinetic architecture. This aim is explored and evaluated through an experimental design investigation in the form of an architectural skin. Through experimentation with alternative materials and a rigorous process of designing the responsive material systems,a new architectural skin, namely Blanket, emerged from this research. The newly developed responsive material system is an amalgamation of silicone rubbers and glowing pigments, molded and fabricated in a prescribed way—embedded with shape memory alloys on a tensegrity skeletal structure to achieve the desired morphing properties and absorb solar energy to glow in the dark.Thus, the design investigation explores the potential of the use of form-changing materials with capacitance sensing, energy absorbing and illumination capabilities for a morphing architectural skin that is capable of responding to proximity and lighting stimuli. This lightweight, flexible and elastic architectural morphing skin is designed to minimize the use of discrete mechanical components. It moves towards an integrated “synthetic” morphing architecture that can sense and respond to environmental and occupancy conditions.
keywords	next generation technology; responsive material system; morphing architectural skin; kinetic structure; physical computing in architectural design; sensing and luminous material
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2013_217
id	caadria2013_217
authors	Kolodziej, Przemyslaw and Jozef Rak
year	2013
title	Responsive Building Envelope as a Material System of Autonomous Agents
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 945-954
doi	https://doi.org/10.52842/conf.caadria.2013.945
wos	WOS:000351496100097
summary	The paper represents the concept of an abstract model of the Responsive Building Envelope (RBE), founded on pre-programmed material’s behaviour. The assumed model of the responsive building envelope is based on the idea of material autonomous agents that control default parameters of building’s energies like ventilation, humidity, light volume, radiation, temperature, etc., by materials’ geometry deformation. The agent is a material system, built with the Electroactive Polymers (EAPs) actuators which react to the environment’s fluctuations continuously and independently from other agents. The model of a responsive envelope is a cluster of self-reliant units which control the primary characteristic of the building environment in an analogous way to the homeostasis system of a living organism. By decentralization the system becomes more stable and reliable. The CFD simulation was created from the schematic model of the RBE’s performance to test the presented design concepts.
keywords	Responsive system, Autonomous agent, Electroactive Polymers (EAPs), Homeostatic cycle, CFD simulation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
doi	https://doi.org/10.52842/conf.acadia.2013.137
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	acadia13_253
id	acadia13_253
authors	Krieg, Oliver David; Menges, Achim
year	2013
title	HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 23-260
doi	https://doi.org/10.52842/conf.acadia.2013.023
summary	The paper presents current research into architectural potentials of robotic fabrication in wood construction based on elastically bent timber sheets with robotically fabricated finger joints. Current developments in computational design and digital fabrication propose an integrative design approach contrary to classical, hierarchical architectural design processes. Architecture related fields, such as material science, engineering and fabrication have been seen as separate disciplines in a linear design process since the Industrialization era. However, current research in computational design reveals the potentials of their integration and interconnection for the development of material-oriented and performance-based architectural design.In the first part, the paper discusses the potentials of robotic fabrication based on its extended design space. The robot’s high degree of kinematic freedom opens up the possibility of developing complex and highly performative mono-material connections for wood plate structures. In the second part, the integration of material behavior is presented. Through the development of robotically fabricated, curved finger joints, that interlock elastically bent plywood sheets, a bending-active construction system is being developed (Figure 1,Figure 2). In the third part, the system’s architectural application and related constructional performance is discussed.
keywords	Robotic Fabrication; Finger Joints; Material Computation; Wood Construction; Computational Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	ijac201311302
id	ijac201311302
authors	Meagher, Mark; David van der Maas, Christian Abegg, Jeffrey Huang
year	2013
title	Dynamic ornament: An investigation of responsive thermochromic surfaces in architecture
source	International Journal of Architectural Computing vol. 11 - no. 3, 301-318
summary	This paper describes the use of environmental sensor data as a basis for the design of architectural ornament that takes on a distinctive appearance in response to the atmospheric conditions where it is located. Among the goals of the project were the identification of inexpensive fabrication methods that could be used to build responsive surfaces at the scale of a room, and the identification of material and tectonic strategies for integrating dynamic information displays in buildings. A series of prototypes were constructed to explore the benefits and limitations of thermochromic ink as a material for visualizing dynamic data, and a method is proposed for building thermochromic surfaces based on printed circuit boards (PCB's) that is cost-effective and allows the fabrication of large surfaces through tiling. The limitations of this method include high power consumption, a short lifespan and difficulties in controlling the surface temperature.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_075
id	ecaade2013_075
authors	Mohammed-Amin, Rozhen K.; von Mammen, Sebastian and Boyd, Jeffrey E.
year	2013
title	ARCS Architectural Chameleon Skin
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 467-475
doi	https://doi.org/10.52842/conf.ecaade.2013.1.467
wos	WOS:000340635300049
summary	Traditionally, interactivity in architecture has been suppressed by its materiality. Building structures that can transform and change themselves have been the dream of many architects for centuries. With the continuous advancements in technology and the paradigm shift from mechanics to electronics, this dream is becoming reality. Today, it is possible to have building facades that can visually animate themselves, change their appearance, or even interact with their surroundings. In this paper, we introduce Architectural Chameleon Skin (ARCS), an installation that has the ability to transform static, motionless architectural surfaces into interactive and engaging skins. Swarm algorithms drive the interactivity and responsiveness of this “virtual skin”. In particular, the virtual skin responds to colour, movements, and distance of surrounding objects. We provide a comprehensive description and analysis of the ARCS installation.
keywords	Interactive architecture; responsive facade; swarm-based projection; virtual skin; interactive installation.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia13_427
id	acadia13_427
authors	Ng, Rashida; Patel, Sneha
year	2013
title	Trajectories of Performative Materials
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 427-428
doi	https://doi.org/10.52842/conf.acadia.2013.427
summary	An enduring consideration within architectural discourse, the notion of performance is intrinsically embedded within design. Over the past several years, architecture has been increasingly attentive to the framework of performance and its potential contributions to contemporary issues within the field. Numerous derivatives of the word perform—for example performance, performative, performalism, performalist—have been applied to architectural contexts within several significant publications providing evidence of the mounting interest of researchers, academics, and theorists to this premise. Within his essay “Architecture as Performative Art,” architect and historian Antoine Picon remarks, “From its Renaissance origins, architecture inherited a concern with effectiveness that other arts did not possess,” (Grobman and Neuman 2012) while also emphasizing that current inquiry into performative criteria within the profession instigates even broader aspirations. Contemporary research surrounding performance in architecture articulates mediated aspirations that negotiate between quantitative and qualitative measures.
keywords	Next Generation Technology; performance, materiality, responsive, technologies, design research
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:58

For more results click below: