Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 93

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_212
id	sigradi2013_212
authors	Angulo, Antonieta; Guillermo Vásquez de Velasco
year	2013
title	Immersive Simulation of Architectural Spatial Experiences
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 495 - 499
summary	The paper describes our research efforts seeking to assess the potential use of immersive simulation through virtual reality (VR) environments as a tool for aiding the design of architectural spatial experiences. By making use of a fully implemented HMD-based VR Environment in our school at Ball State University we conducted a controlled experiment with novice design students. After the evaluation of results of the experiment we have found evidence of the positive impact of the use of the system in design education. We will further investigate on the best practices to incorporate its pervasive use based on high-impact simplified methods.
keywords	Spatial experience; Immersive simulation; Head mounted display; Virtual reality; Design education
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia13_093
id	acadia13_093
authors	Konis, Kyle
year	2013
title	Wiring to the Sky
doi	https://doi.org/10.52842/conf.acadia.2013.093
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 93-100
summary	As architectural design methodologies focus increasingly on the production of dynamic form, the means to actuate these forms, the input that fuels parametric processes, analytical form-generating techniques and responsive controls is of primary concern. In the virtual test beds where systems are developed, inputs are often ad-hoc, based on crude assumptions of the environment, or disconnected from the physical environment entirely.Inverting a technique originally developed to illuminate virtual objects with light captured from real (physical) environments, this project explores image-based lighting as a means of detailed environmental light sensing. The objective of the project is to demonstrate the application of High Dynamic Range (HDR) image data acquired continuously in the physical world as signal input to inform, actuate and evaluate responsive solar control and daylighting systems. As a proof of concept, a virtual hemispherical dome consisting of 145 apertures is controlled to respond in real time to continuous image-based measurements of sky luminance, seeking a defined set of daylighting and solar control objectives. The paper concludes by discussing the implications of incorporating real-world environmental data in the development of dynamic form.
keywords	complex systems, image-based lighting, environmental adaptation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	sigradi2013_379
id	sigradi2013_379
authors	Monteiro de Menezes, Alexandre; Maria de Lourdes Silva Viana; Mário Lucio Pereira Junior; Sérgio Ricardo Palhares
year	2013
title	CAD e BIM: Evolução ou Revolução na Aprovação de Projetos de Edificações nas Instâncias Legais? [CAD and BIM: Evolution or Revolution in Building Projects Approval in Legal Instances?]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 302 - 306
summary	This research compared CAD and BIM, seeking to identify evolution, or revolution, in the field of building projects, focusing on municipal approval. The research sought to understand municipal, state and federal normative to approve architectural projects and studied CAD and BIM in the light of the technical documents generation submitted for building projects evaluation and approval. The aim was to compare the efficiency of 3D model for the analysis of projects in municipalities. The results identify adequacies and inadequacies on both platforms, but also formulate suggestions for improvements in the process of evaluation and approval of projects by local governments.
keywords	BIM; Architectural design; Projects approval; Graphic communication; Buildings construction
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email
last changed	2013/10/07 19:08

_id	sigradi2013_311
id	sigradi2013_311
authors	Porto Carreiro, Patrícia; Rejane de Moraes Rêgo
year	2013
title	Mapas Mentais e Ferramentas Computacionais na Gestão da Informação do Processo de Ensino Projetual da Arquitetura, Urbanismo e Paisagismo [Mind Maps and Computational Tools in the Information Management in the Process of Design Teaching in Architecture, Urbanism and Landscaping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 590 - 594
summary	This article relates a teaching experience in the discipline “InfoAU II” at the CAU/UFPE/Brasil. One of the objectives is, working with the students, reflecting about the design as a multidisciplinary knowledge integration process. The other one is opening a discussion about the importance in the Information management in the process of design teaching in Architecture, Urbanism and Landscaping within digital environments. The methodology involves a construction of mind maps on paper and digital format (using the software Prezi) as a tool for registration of design process, which it shows the requirement to get deeply in seeking methodologies and tools for a reflexive design teaching.
keywords	Mind maps; Information management; Design process; Design teaching; Curriculum
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2013_143
id	sigradi2013_143
authors	Veiga, Monica; Adriane Borda; Francisca Michelon; Tatiana Lebedeff
year	2013
title	Atribuição de Acessibilidade à Fotografia através da Restituição e Desconstrução da Tridimensionalidade [Attribution of accessibility to photography through the restitution and deconstruction of three-dimensionality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 449 - 453
summary	This paper describes the experiments that are being developed to support an inclusive or accessible exposition of photographs. Physical three dimensional models are being developed using 3D printing technologies to allow tactile experience. The method being structured for this production is registered. It includes the use of the concept of games seeking to work with the purpose of decomposition of information which is recommended by the inclusive communication literature.
keywords	Tactile mock-up; Accessibility; Visual Impairment; Museum; Assistive technology
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	caadria2013_030
id	caadria2013_030
authors	Adamantidis, Ermis; Madhav Kidao and Marios Tsiliakos
year	2013
title	Siphonophore – A Physical Computing Simulation of Colonial Intelligence Organisms
doi	https://doi.org/10.52842/conf.caadria.2013.355
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 355-364
wos	WOS:000351496100035
summary	This paper sets out to document the procedural design and implementation of “Siphonophore” a multisensory digital ecology, mimicking colonial-ordered behaviour systems. The exploration of the notion of “self” in a complex system of highly integrated individuals with reference to the emergence of behaviours from the human-machine-context interaction, is engaged by this open system’s hierarchical articulation of electronics, Arduino boards, sensors and programming routines. User interaction and recorded statistics from the system’s core algorithm are assessed, in relation to the capacity of this prototype to provide an alternative methodology of describing collective intelligence, while presenting a non-standard perspective of body-space interaction and design as entertaining art. The overall impact is discussed in relation to the examined observations, towards a potential advancement to a system of superior contextual understanding.
keywords	Colonial intelligence, Multisensory installation, Physical computing, Spatial sensing, Human-machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia13_281
id	acadia13_281
authors	Ahlquist, Sean; Menges, Achim
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
doi	https://doi.org/10.52842/conf.acadia.2013.281
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 281-292
summary	Material behavior can be defined as the confluence of associative rules, contextual pressures and constraints of materialization. In more general terms, it can be parameterized as topologies, forces and materiality. Forming behavior means resolving the intricate matrix of deterministic and indeterministic factors that comprise and interrelate each subset of these material- nherent conditions. This requires a concise design framework which accumulates the confluent behavior through successive and cyclical exchange of multiple design modes, rather than through a single design environment or set of prescribed procedures. This paper unfolds a sequencing of individual methods as part of a larger design framework, described through the development of a series of complex hybrid- structure material morphologies. The “hybrid” nature reflects the integration of multiple force-active structural concepts within a single continuous material system, devising both self-organized yet highly articulated spatial conditions. This leads primarily to the development of what is termed a “textile hybrid” system: an equilibrium state of tensile surfaces and bending-active meshes. The research described in this paper looks to expose the structure of the textile as an indeterministic design parameter, where its architecture can be manipulated as means for exploring and differentiating behavior. This is done through experimentation with weft-knitting technologies, in which the variability of individual knit logics is instrumentalized for simultaneously articulating and structuring form. Such relationships are shown through an installation constructed at the ggggallery in Copenhagen, Denmark.
keywords	Material Behavior, Spring-based Simulation, CNC Knitting, Form- and Bending-Active, Textile Hybrid Structures.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	caadria2013_262
id	caadria2013_262
authors	Alston, Mark E.
year	2013
title	Space Emergent Field
doi	https://doi.org/10.52842/conf.caadria.2013.715
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 715-724
wos	WOS:000351496100070
summary	Architecture has always been founded upon ideologies. However could the influence of human interactions create a new perspective for space form evolution? To create a spatial adaptive system, to the influence of culture and behaviour of human being? The output of this spatial system is the determination of optimised values for spatial configurations by biomolecular, self-assembly computation for emergent spatial forms.
keywords	Spatial, Adaptive, Biomolecular computations, Self-assembly
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
wos	WOS:000361385100030
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_034
id	caadria2013_034
authors	Arenas, Ubaldo and José Manuel Falcón
year	2013
title	ALOPS Constructive Systems – Towards the Design and Fabrication of Unsupervised Learning Construction Systems
doi	https://doi.org/10.52842/conf.caadria.2013.905
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 905-914
wos	WOS:000351496100093
summary	In this paper we explore the concept and design guidelines for an Autonomous Learning Oriented Proto System (ALOPS), a construction system designed to enhance its own performance through time. Our research has been focused on the fabrication of a prototype for a porous wall system which reacts to light intensities by closing or opening its apertures. Taking that aim, we used a combination of robotics, programing, and material behaviour to endow the system with the capacity to record reactions towards encountered sets of conditions during its active energy periods, allowing the system to use this knowledge database to evolve autonomously by feeding this information back into the computation process. This approach in construction systems opens up the architectural design processes to address the creation of digital memory structures rather than complex algorithms in order to operate specific functions. With this development, the architect could think of architectures constantly evolving by learning from their environments as well as of users forming symbiotic and behavioural bonds with the emergent spatial personalities, thus affecting the underpinning relationships between architecture, user and context.
keywords	erformance architecture, Unsupervised learning, Machine learning
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_214
id	ecaade2013_214
authors	Barros, Pedro; Beirão, José and Duarte, José Pinto
year	2013
title	The Language of Mozambican Slums
doi	https://doi.org/10.52842/conf.ecaade.2013.2.715
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 715-724
wos	WOS:000340643600074
summary	A shape grammar was developed for analyzing the evolution of Maputo´s slums with the strategic objective of capturing the evolution of house types and understanding the social agreements behind the spatial relations of their house elementary spaces in order to reuse such rules for the purpose of rehabilitation. This paper shows preliminary results of the research and aims at developing, based on the resulting grammars, a parametric tool able to execute morphological analyses, simulations and generate improved design solutions for the qualification of Maputo´s informal settlements.
keywords	Shape grammars; urbanism; computation; regeneration; informal settlements.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2013_036
id	ecaade2013_036
authors	Bernhard, Mathias
year	2013
title	Frequency Analysis of Wood Textures
doi	https://doi.org/10.52842/conf.ecaade.2013.1.597
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 597-603
wos	WOS:000340635300062
summary	“Frequency analysis of wood textures” presents the application of Fourier analysis to translate images of wood textures to the frequency domain. With this encoding, a lot more details can be captured by the same amount of data points than with other descriptions in the spatial domain. A small set of overlapping waves with different frequencies, magnitudes and phase angles allows to characterize the main features of the wood’s grain texture and to quantify and classify different samples. The sample’s color information is thereby enhanced with an array of direction vectors, describing the local orientation distribution.
keywords	Wood; Fourier analysis; pattern recognition; information theory.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia13_293
id	acadia13_293
authors	Bessai, Tom
year	2013
title	Bending-Active Bundled Structures: Preliminary Research and Taxonomy Towards an Ultra-Light Weight Architecture of Differentiated Components
doi	https://doi.org/10.52842/conf.acadia.2013.293
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 293-300
summary	This paper documents preliminary research into a bending-active architecture that leverages the “bundling” of linear force-active elements in order to create spatial diversity and differentiation.The primary design components of the system are light-weight GFRP rods and tubes that perform well in elastic bending. Material testing and iterative physical model studies are documented, and provide a framework to guide the further development of emerging spring-based computation methods. Challenges to the system include the analysis and resolution of rod-to-rod bundled connections, as well as the development of predictable bifurcation and crossing unions. The paperidentifies key precedents to the work followed by a brief summary of the material selection and testing framework. A speculative taxonomy of bundled bending-active “types” is proposed and supported by examples and prototypes.
keywords	Bundling, Bending-Active, Force-Active Architecture, Material Systems, Spring-based Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
wos	WOS:000340635300055
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_135
id	ecaade2013_135
authors	Buš, Peter
year	2013
title	Emergent Urban Strategies
doi	https://doi.org/10.52842/conf.ecaade.2013.1.283
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 283-290
wos	WOS:000340635300029
summary	This paper presents the results of partial research in the area of designing processes and methods of spatial and social interaction of multi-agent system with its environment in the city urban structure. According to the logic defined by the intrinsic rules of the simulation model of the selected area,there will be verified and tested the emergent phenomena resulting in changes in the configurations of urban structures.
keywords	Emergence; multi-agent modeling; bottom-up; city reconfiguration, collective design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_072
id	caadria2013_072
authors	Christopher, Hannah; Srinivas Tadeppalli and G. Subbaiyan
year	2013
title	Computer Aided Modular Geometric Modeling,to Study the Perception of Safety – Natural Surveillance for Perceived Personal Security
doi	https://doi.org/10.52842/conf.caadria.2013.761
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 761-770
wos	WOS:000351496100079
summary	Natural surveillance is one key factor proposed, in the approach to decrease fear of crime. Building fenestrations and outdoor spaces like terrace, balconies and verandas that extend the interior spaces and the indoor activities, beyond the closed external shell of the buildings, are proposed by CPTED, in their place specific policy guidelines, to help design out fear and crime. In this background, this study on natural surveillance opportunities, explores typological variations of these component outdoor spaces of buildings, in line with variations in size and location. The affordances considered for this study specifically focus on the ways in which these spaces structure the visual fields for the external observer. This paper thus reports the survey of visual preferences exploring the spatial affordances of building spaces and their association with fear of crime.
keywords	Natural surveillance, Typology, Fear of crime, Visibility analysis
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: