Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 607

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_127
id	ecaade2013_127
authors	Lückert, Angelika; Koch, Volker and von Both, Petra
year	2013
title	Dances with Architects
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 587-594
doi	https://doi.org/10.52842/conf.ecaade.2013.2.587
wos	WOS:000340643600060
summary	This paper proposes a complementary approach for the architectural design studio. By interpreting architecture by means of an interactive (dance) performance as design task it combines architectural theoretical examination with the implementation of new technologies and event realization. This design studio concept integrates scenography, choreography, sound design and event management, providing workshops carried out by external and internal experts to give insight into these disciplines and new tools. The experimental form allows the students to define the specific form within a broad scope, ranging from a dance performance performed by the students themselves to an interactive installation. The focus for the students was on dealing with the diverse input and on the decision-making process and its reflection.
keywords	Interactive; performance; teaching; collaboration; gesture control.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2013_027
id	caadria2013_027
authors	Sevtsuk, Andres; Onur Ekmekci, Farre Nixon and Reza Amindarbari
year	2013
title	Capturing Urban Intensity
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 551-560
doi	https://doi.org/10.52842/conf.caadria.2013.551
wos	WOS:000351496100054
summary	While the methods for capturing the negative effects of density (e.g. congestion, friction) are widely understood and operationalized, capturing the positive effects of density (e.g. vibrancy, walkability) remain poorly explored. This research focuses on the latter, proposing a novel spatial analysis and mapping approach that can be used to capture the intensity of urban environments. We distinguish between urban density and intensity. Whereas density refers to the amount of people or elements of urban form (e.g. dwelling units, floor area) per unit area of land, intensity refers to the concentration of commercial and service activities on the ground floors along city streets. Bridging morphological mapping techniques with recent network analysis in GIS, ten metrics that capture specific attributes of the built environment influential to intensity are introduced and implemented using data collected from detailed field surveys within two comparative districts in the Bugis area of Singapore. A discussion of the efficacy of these metrics for urban design concludes the paper.
keywords	Urban intensity, Density, Built environment modelling, Urban design, Surveying
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2014_001
id	ecaade2014_001
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 2
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 632 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.1
summary	This is the second volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The second volume of the proceedings contains 65 papers grouped under nine sub-themes (Generative Design- Parametric Modelling, Material, Collaboration and Participation, VR, Spatial Analysis, Shape, Form and Geometry 2, BIM, Design Tool 2 and Smart and Responsive Design).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2014_000
id	ecaade2014_000
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 1
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 668 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.2
summary	This is the first volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The first volume of the proceedings contains 65 papers grouped under seven sub-themes (Towards Smarter Cities, Design Tool 1, CAAD Education, Fabrication, Shape-Form-Geometry, Visualisation and Digital Heritage).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	caadria2013_030
id	caadria2013_030
authors	Adamantidis, Ermis; Madhav Kidao and Marios Tsiliakos
year	2013
title	Siphonophore – A Physical Computing Simulation of Colonial Intelligence Organisms
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 355-364
doi	https://doi.org/10.52842/conf.caadria.2013.355
wos	WOS:000351496100035
summary	This paper sets out to document the procedural design and implementation of “Siphonophore” a multisensory digital ecology, mimicking colonial-ordered behaviour systems. The exploration of the notion of “self” in a complex system of highly integrated individuals with reference to the emergence of behaviours from the human-machine-context interaction, is engaged by this open system’s hierarchical articulation of electronics, Arduino boards, sensors and programming routines. User interaction and recorded statistics from the system’s core algorithm are assessed, in relation to the capacity of this prototype to provide an alternative methodology of describing collective intelligence, while presenting a non-standard perspective of body-space interaction and design as entertaining art. The overall impact is discussed in relation to the examined observations, towards a potential advancement to a system of superior contextual understanding.
keywords	Colonial intelligence, Multisensory installation, Physical computing, Spatial sensing, Human-machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_192
id	sigradi2014_192
authors	Angulo, Antonieta H.; Guillermo P. Vasquez de Velasco
year	2014
title	Immersive Simulation in Instructional Design Studios
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 236-240
summary	The paper describes the implementation of “immersive simulation studios” at Ball State University and their impact on architectural design education. This implementation is part of our on-going research efforts aimed to expand conventionally available digital design tools by including state-of-the-art virtual reality (VR) technology in design studios. Two consecutive immersive simulation studios were held during the academic year 2013-2014; we tested teaching/learning methodologies for effectively using the VR simulation to support the students in the design of architectural spaces. The results make reference to the learning outcomes from these implementations and the level of satisfaction of students using the tool.
keywords	Architectural Education; Design Studios; Virtual Reality; Immersive Simulation; Head-Mounted Display
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2021_412
id	caadria2021_412
authors	Estrina, Tatiana, Hui, Vincent and Ma, Lena
year	2021
title	The Digital Design Build - Modes of Experiential Learning in the Pandemic Era
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 41-50
doi	https://doi.org/10.52842/conf.caadria.2021.2.041
summary	In recent years, academia has deviated from the lecture-based model to a hybridized system of instruction and experiential learning. Experiential learning aids students in understanding collaborative processes in architectural praxis and exposes them to engaging learning opportunities, a critical component of architectural studio education (Nijholt et al. 2013). During the COVID-19 outbreak, students are barred from accessing on-campus facilities. This causes a redevelopment of curricular delivery and disrupts experiential learning which heavily relies on in-person interaction. It is imperative for instructors to retain experiential learning in the transition to virtual instruction. This paper explores experiential learning within virtual platforms for instruction. Through outlining the implementation of technologies, capitalizing on connectivity, and maximizing opportunity for digital problem solving, the authors posit a framework that other educators may adopt. The paper concludes with a case study of a virtual design-build project, and the various techniques implemented in retaining experiential learning during the pandemic.
keywords	Pedagogy; Experiential learning; Social connectivity; Resilience; Disrupted education
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2013_038
id	ecaade2013_038
authors	Gallas, Mohamed-Anis and Halin, Gilles
year	2013
title	DaylightGen: From Daylight Intentions to Architectural Solutions
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 107-116
doi	https://doi.org/10.52842/conf.ecaade.2013.2.107
wos	WOS:000340643600010
summary	This paper addresses the integration of the daylight effect during the early stages of the architectural design process. The first part presents a design assistance method that helps designers to characterize their daylight intentions and materialize them in architectural solutions. In this part, we describe the implementation of this method in a design tool, denoted DaylightGen, the implemented process and the different system components. The second part of this paper focuses on the investigation of the potential of the proposed method in design process. It was evaluated in educational design case study. This part integrates the experimentation process and his results.
keywords	Computer aided architectural design; intentions oriented design; generative and parametric design tool; daylight simulation tool; design tool experimentation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_130
id	caadria2013_130
authors	Grace, Kazjon S.; John S. Gero and Rob Saunders
year	2013
title	Experiential Influences on Computational Association in Design
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 863-872
doi	https://doi.org/10.52842/conf.caadria.2013.863
wos	WOS:000351496100089
summary	This paper presents a computational model of association in design that incorporates the ability to learn from experience. Experiments with an implementation of our model of computational design association, the interpretation-driven model, demonstrate this experiential influence. The challenges inherent in 66tial offered by the interpretation-driven approach are discussed with reference to a typology of association learning.
keywords	omputational design, Association, Experiential learning
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2014_150
id	caadria2014_150
authors	Knapp, Chris; Jonathan Neslon and Michael Parsons
year	2014
title	Constructing Atmospheres
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 149–158
doi	https://doi.org/10.52842/conf.caadria.2014.149
summary	This paper documents and critically reflects upon the design, development, fabrication, and implementation of three pavilion projects developed during 2013-14. The core investigation of this work is the production of architectural spaces characterized by a quality of enveloping, diffuse, visual and spatial atmospheres. The principal activity of the research is aimed at refining methods for software-based exploration of formal complexities and the subsequent need to control variability and efficiency in fabrication output, using Grasshopper for Rhino to develop customized definitions particular to each specific project scenario. Linking the projects together are issues of scale, resolution of effect, and intent to move from disparate assemblies of structure and skin toward composite, manifold construction techniques that address multiple concerns (gravity, bracing, affect, etc) with a minimum of assembly. A material palette common to the current vernacular of CNC-based projects such as plywood, plastics, and other sheet materials is utilised. This work is invested in extending the possibilities of the architect and architecture as a discipline, extrapolating the workflow from these successive projects to the speculative impact of the work upon emerging possibilities of architectural construction and craft.
keywords	3d modelling; Digital fabrication; Rhinoceros; Grasshopper; Tessellation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2013_080
id	caadria2013_080
authors	Koh, Immanuel
year	2013
title	Computer Vision and Augmented Reality Technologies in Experimental Architectural Design Education at the AA
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 427-436
doi	https://doi.org/10.52842/conf.caadria.2013.427
wos	WOS:000351496100042
summary	This paper aims to investigate the potential of both open source software and new media (esp. computer vision and augmented reality) as tools for architectural design and education. The examples illustrated in the paper would be drawn mainly from students’ projects done as part of their AA Media Studies Course submission at the AA School of Architecture (AA) during the academic years from 2011/2012 to 2012/2013. The paper outlines the main approaches, which students have chosen to implement, both directly and indirectly, these new media and tools into their studio work at the AA. Section 1 briefly introduces a range of currently available open source computational design toolkits that are deemed useful for quick implementation of computer vision and augmented reality technologies. The related programming languages, softwares and hardwares would also be introduced and described accordingly. Sections 2 and 3 are accompanied with a visual catalogue of students’ projects to better illustrate the diversity in the understanding and implementation of computer vision and augmented reality technologies in architectural design. Section 4 serves to conclude the paper by first discussing briefly the feedback from students at the end of the course before clarifying the context of the research and thus its relation to recent work done by others using similar technologies.
keywords	Computer vision, Augmented reality, Generative design, Interaction design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2013_114
id	ecaade2013_114
authors	Lin, Shih-Hsin Eve and Gerber, David
year	2013
title	Evolutionary Energy Performance Feedback for Design (EEPFD)
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 175-184
doi	https://doi.org/10.52842/conf.ecaade.2013.2.175
wos	WOS:000340643600017
summary	In order to understand the applicability of multidisciplinary design optimization (MDO) to the building design process, a MDO framework, titled Evolutionary Energy Performance Feedback for Design (EEPFD), along with the prototype tool, H.D.S. Beagle, were developed to support designers with the incorporation of partially automated performance feedback during the early stages of design. This paper presents 2 experimental case studies, one from the design profession and the other from a design studio, that evaluate the applicability and impact of EEPFD on the early stage design process. Through these two case studies two different interaction and automation approaches for applying EEPFD are explored as part of the framework validation. Observed benefits, challenges and suggestions of EEPFD’s implementation are then presented and discussed.
keywords	Conceptual energy performance feedback; design decision support; performance-based design; multidisciplinary design optimization; genetic algorithm.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2023_317
id	ecaade2023_317
authors	Zamani, Alireza, Mohseni, Alale and Bertug Çapunaman, Özgüç
year	2023
title	Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 387–396
doi	https://doi.org/10.52842/conf.ecaade.2023.1.387
summary	Robotic additive manufacturing has garnered significant research and development interest due to its transformative potential in architecture, engineering, and construction as a cost-effective, material-efficient, and energy-saving fabrication method. However, despite its potential, conventional approaches heavily depend on meticulously optimized work environments, as robotic arms possess limited information regarding their immediate surroundings (Bechthold, 2010; Bechthold & King, 2013). Furthermore, such approaches are often restricted to planar build surfaces and slicing algorithms due to computational and physical practicality, which consequently limits the feasibility of robotic solutions in scenarios involving complex geometries and materials. Building on previous work (Çapunaman et al., 2022), this research investigates conformal 3D printing of clay using a 6 degrees-of-freedom robot arm and a vision-based sensing framework on parametrically reconfigurable tensile hyperbolic paraboloid (hypar) formwork. In this paper, we present the implementation details of the formwork system, share findings from preliminary testing of the proposed workflow, and demonstrate application feasibility through a design exercise that aims to fabricate unique components for a poly-hypar surface structure. The formwork system also offers parametric control over generating complex, non-planar tensile surfaces to be printed on. Within the scope of this workflow, the vision-based sensing framework is employed to generate a digital twin informing iterative tuning of the formwork geometry and conformal toolpath planning on scanned geometries. Additionally, we utilized the augmented fabrication framework to observe and analyze deformations in the printed clay body that occurs during air drying. The proposed workflow, in conjunction with the vision-based sensing framework and the reconfigurable formwork, aims to minimize time and material waste in custom formwork fabrication and printing support materials for complex geometric panels and shell structures.
keywords	Robotic Fabrication, Conformal 3D Printing, Additive Manufacturing, Computer-Vision, Reconfigurable Formwork
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2013_087
id	caadria2013_087
authors	Lee, Jung Hoon and Atsuko Kaga
year	2013
title	Visual Analysis of the Relation Between Concentrated Districts of Knowledge-Based Industries and Third Places in Osaka City
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 581-589
doi	https://doi.org/10.52842/conf.caadria.2013.581
wos	WOS:000351496100057
summary	Recently, as the changes in the economic structure, service industries have become an important factor of the urban regeneration. Especially, Knowledge-based industry is garnering attention as an engine of urban economics. Urban present condition such as location of Knowledge-based industry visualization and analysis are main issues for people as well as policymakers, urban planner and designers. This paper presents analysis of the spatial characteristics of the distribution and spatial concentration of Knowledge-based Industry, specifically Business-support Services. Furthermore, this paper is intended to describe examination of the visual relation between spatial conditions and configuration by visualization using GIS and space syntax analysis. This paper shows that business support services are likely to concentrate in specific places. Results of this study show that each type of business support services is concentrated in different districts. Results show that creative design industries are located near the park, riverfront, and such third places with high integration and connectivity with the street by space syntax analysis. Results show that concentrated districts of creative design companies at inner block show relatively high local integration values and connectivity. This study elucidates how industrial concentration and spatial configuration can be ascertained visually.
keywords	Spatial analysis, Knowledge-based industry, Third place, GIS, Space syntax
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
doi	https://doi.org/10.52842/conf.caadria.2016.497
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_096
id	ecaade2013_096
authors	Achten, Henri
year	2013
title	Buildings with an Attitude
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 477-485
doi	https://doi.org/10.52842/conf.ecaade.2013.1.477
wos	WOS:000340635300050
summary	In order to achieve interactive architecture it is necessary to consider more than the technological components of sensors, controllers, and actuators. The interaction can be focused to different interaction activities: instructing, conversing, manipulating, and exploring (we propose to call this the interaction view). Additionally, the purpose of the building may range from performing, sustaining, servicing, symbolising, to entertaining (we propose to call this the world view). Combined, the interaction view and world view establish 20 different attitudes, which are flavours of behaviour for the interactive building. Through attitudes interaction profiles can be established and criteria derived for the design of interactive buildings.
keywords	Interactive architecture; design theory; Human-Computer Interaction; augmented reality; mixed reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_297
id	ecaade2013_297
authors	Aish, Robert
year	2013
title	DesignScript: Scalable Tools for Design Computation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 87-95
doi	https://doi.org/10.52842/conf.ecaade.2013.2.087
wos	WOS:000340643600008
summary	Design computation based on data flow graph diagramming is a well-established technique. The intention of DesignScript is to recognise this type of data flow modeling as a form of ‘associative’ programming and to combine this with the more conventional ‘imperative’ form of programming into a single unified computational design application. The use of this application is intended to range from very simple graph based exploratory ‘proto-programming’ as used by novice end-user programmers to multi-disciplinary design optimisation as used by more experienced computational designers.
keywords	Graph; scripting; associative; imperative.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_161
id	acadia13_161
authors	Akbarzadeh; Masoud
year	2013
title	Performative Surfaces: Generating complex geometries using planar flow patterns
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 161-172
doi	https://doi.org/10.52842/conf.acadia.2013.161
summary	This research explains the development process of a design tool that can construct complex surface geometries using only two-dimensional plan drawings. The intention behind this tool is to address certain complex behavior of surface geometries such as hydrological characteristics. This paper briefly explains the historic and mathematic description of surface data structures, according to Cayley, Maxwell and Morse. This is followed by a brief introduction of the surface network/critical graph extraction technique in GIS. Additionally, the algorithm of contour extraction from asimple critical graph to reconstruct a surface is explained. In the final section the lessons learnedfrom the previous sections are used to develop algorithms for a tool which uses only plan drawings to construct complex surfaces. Three algorithms are explained in the final section among which the third one is considered to be the most complete and promising approach. Therefore,some design examples are presented to show the flexibility of the tool. At the end, this paper provides suggestions and discussions to reflect further ideas in order to improve the tool in future.
keywords	Tools and Interfaces, complex surface, drainage patterns, discrete flow diagram, surface networks, critical graph, and surface generation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: