Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ecaade2013_249
id	ecaade2013_249
authors	Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year	2013
title	Bioinformed Performative Composite Structures
doi	https://doi.org/10.52842/conf.ecaade.2013.1.575
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
summary	This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
wos	WOS:000340635300060
keywords	Bioinformed; multi-material; composite; parametrics; performative design.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac201311303
id	ijac201311303
authors	Beorkrem, Chris; Mitchell McGregor, Igor Polyakov, Nicole Desimini
year	2013
title	Sphere Mapping: a method for responsive surface rationalization
source	International Journal of Architectural Computing vol. 11 - no. 3, 319-330
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a parametric surface. The research attempts to propose a method for attaching fixed sized objects to a free flowing surface or "blanket." The model can be used to interrogate a series of shapes and forms with the same componentry. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe and his students developed a series of studies in material and surface properties. By utilizing a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Rhino Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe's original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
series	journal
last changed	2019/05/24 09:55

_id	cf2013_315
id	cf2013_315
authors	Chang, Darren
year	2013
title	Aerodynamic Performance Driven Form-Generation for Skyscraper Design
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 315-326.
summary	I have conducted a study to explore aerodynamic performance as a driver for skyscraper design, utilizing up-to-date parametric design and computational fluid dynamics (CFD) technologies readily available to architects. Previous scientific research has suggested strategies in modifying the form of skyscrapers for the purpose of improving their aerodynamic performance. I have incorporated six of such strategies into parametric design tool to produce a matrix of 60 prototypes. These prototypes are subjected to qualitative and quantitatively evaluation iterations to yield the most optimized design, with considerations given primarily to aerodynamic performance, and secondarily to structural robustness, program potential, and image attractiveness. The selected design option is further developed into a skyscraper concept. A multi-staged aerodynamic performance-driven design process is the most important result of the study. In addition, two valuable insights have been obtained: first, to inject a new inspiration into the design of skyscrapers, I have implemented the MultiDisciplinary Optimization (MDO) methodology from the aerospace industry. Second, I am able to support form-generation parametric design by quantitative evaluation process.
keywords	performative architecture, performance-driven form-generation, skyscraper design, multi-disciplinary optimization, tall building aerodynamics
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2014_029
id	caadria2014_029
authors	Devilat, Bernadette and Stephen Gage
year	2014
title	The Role of the Record and the Paradox of the Original
doi	https://doi.org/10.52842/conf.caadria.2014.317
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 317–326
summary	Earthquakes have progressively destroyed the Chilean built heritage over the years, not only due to the initial devastation they produce, but also as a result of the applied reconstruction approaches that follow. The design of reconstruction projects has usually aimed to re-establish the previous built form of historic buildings; generating new ‘heritage’ constructions that try to imitate only the appearance of previous ones rather than understanding that heritage, in the case studied, includes a sustainable mode of construction. This issue occurs in places where previous records are sometimes non-existent, which poses the question of authenticity. Considering the regularity of earthquakes in Chile, the role of accurate recording technologies, such as 3D laser scanning, becomes relevant. Their implications for new and existing architectures in the re-construction process include being a virtual database for demolition, retrofitting, intervention or replica. This paper examines the survey of the church of San Lorenzo de Tarapacá obtained in January 2013, and discusses how this, in conjunction with previous records, might impact on what is considered heritage and the design of future reconstructions.
keywords	Earthquakes; 3D scanning; heritage intervention; replica; Tarapacá
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2013_347
id	cf2013_347
authors	Dillenburger, Benjamin and Michael Hansmeyer
year	2013
title	The Resolution of Architecture in the Digital Age
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 347-357.
summary	The resolution of architecture is a measure of the spatial density of information inherent in a building. This paper demonstrates how the confluence of advances in computational design and additive manufacturing has recently led to a paradigm shift in potential architectural resolution. Buildings can now be designed and fabricated with elements at the threshold of human perception. This resolution can be used to replicate existing architectural styles ever more efficiently and accurately. Yet as with the introduction of other new technologies, architects must now explore the latent potentials and determine what kind of new architectures become conceivable. Specifically, what architectures can adequately express this enormous resolution and the unlimited geometric complexity within reach? With the project Digital Grotesque, we present the first human-scale, enclosed structure that truly exploits these opportunities. Algorithms are used to articulate and orchestrate the geometry from the macro scale down to 1mm small details. The structure is enriched with local information at a previously unseen resolution. A unique language of form is developed that transcends rationality and celebrates spatial expression: a digital exuberance.
keywords	high resolution, additive manufacturing, 3d printing, digital fabrication, computational design, subdivision, mesh
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013r_018
id	ecaade2013r_018
authors	Goyal, Akshay
year	2013
title	Field condition and the robotic urban landscapes
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 217-228
summary	The paper explores the concept of the ‘field condition’ in recent urban discourse and its implication with respect to emerging technologies in the domains of robotics and AI. The author argues that the notion of ‘field condition’ as one of ‘loosely bound aggregates characterized by porosity and local interconnectivity defined not by overarching geometrical schemas but by intricate local connections’1, has inherent limitations in its contemporary manifestation. The paper then discusses the discourse of the field theory in architecture & urbanism in context with recent developments in swarm robotics, modular self reconfiguring robotic systems and distributed intelligence. Recent design proposals that explore the idea of the city informed by such technologies are also analyzed. The author then argues for a ‘Robotic Urban Landscape’ that builds on the notion of the field as a possibility in the near future. In such a theoretical construct the city consists of a field of ‘nomadic’ mobile technological artifacts that respond to a complex set of parameters and act as a collective whole. The ‘robotic field condition’ in this respect has both physical and virtual dimensions, is both machinic and biological, and has fuzzy binary condition, effectively dematerializing its identity as part of the larger whole. Such fields of mini robots, which collectively are able to perform complex task systems, get intrinsically linked to the city fabric and result in a new urban ecology. The impact on the urban condition as a result of these ‘robotic fields’ of loosely bound mobile artificial constructs that respond in the mathematical matrix of urban ecology and socio economic parameters, is also discussed. Lastly the author suggests a provocative likelihood of a ‘singularity’ moment in light of these developments and the need to relook at contemporary architectural discourse
keywords	Field theory, robotics, artificial intelligence, robotic ecology, emerging technology, emergent urbanism
email
last changed	2013/10/07 19:08

_id	caadria2014_044
id	caadria2014_044
authors	Huang, Alvin; Stephen Lewis and Jason Gillette
year	2014
title	Pure Tension: Intuition, Engineering & Fabrication
doi	https://doi.org/10.52842/conf.caadria.2014.171
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 171–180
summary	The "PURE Tension" Pavilion is a lightweight, rapidly deployable, tensioned membrane structure and portable charging station commissioned by Volvo Car Italia to showcase the new Volvo V60 Hybrid Electric Diesel car. Officially launched in Milan, Italy in October 2013, this experimental structure was developed through a process of rigorous research and development that investigated methods of associative modelling, dynamic mesh relaxation, geometric rationalization, solar incidence analysis, membrane panelling, and material performance. It is an experimental structure that, similar to a concept car, is a working prototype that speculates on the potential future of personal mobility and alternative energy sources for transportation while also exploring digital design methodologies and innovative structural solutions. This paper will illustrate the design, development and fabrication processes involved in realizing this structure.
keywords	Form-finding; dynamic-mesh relaxation; geometric rationalisation; patterning, digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
wos	WOS:000361384700036
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac201310102
id	ijac201310102
authors	Kocaturk, Tuba
year	2013
title	Emerging Socio-Technical Networks of Innovation in Architectural Practice
source	International Journal of Architectural Computing vol. 11 - no. 1, 21-36
summary	This article reports on the initial analyses and findings of on-going research project which investigates the socio-technical transformation of Architectural practice due to technology adoption.A conceptual framework is developed as a tool to identify, analyse, and characterize the different socio-technical networks in current practice, and the ways in which these networks are being developed and coordinated. Highly technology- mediated and interdisciplinary architectural/engineering practices have been monitored and studied in their real-life project contexts.Through comparative case analyses, a conceptual framework has been developed and used to represent and analyse emerging socio- technical networks and the ways in which these networks facilitate innovation. In this context, new modes/practices of innovations are identified through the diverse and dynamic relationships emerging between architects, digital tools/systems, the design artefact, and the various multi-disciplinary knowledge/actors in a socio-technical setting.
series	journal
last changed	2019/05/24 09:55

_id	caadria2013_080
id	caadria2013_080
authors	Koh, Immanuel
year	2013
title	Computer Vision and Augmented Reality Technologies in Experimental Architectural Design Education at the AA
doi	https://doi.org/10.52842/conf.caadria.2013.427
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 427-436
summary	This paper aims to investigate the potential of both open source software and new media (esp. computer vision and augmented reality) as tools for architectural design and education. The examples illustrated in the paper would be drawn mainly from students’ projects done as part of their AA Media Studies Course submission at the AA School of Architecture (AA) during the academic years from 2011/2012 to 2012/2013. The paper outlines the main approaches, which students have chosen to implement, both directly and indirectly, these new media and tools into their studio work at the AA. Section 1 briefly introduces a range of currently available open source computational design toolkits that are deemed useful for quick implementation of computer vision and augmented reality technologies. The related programming languages, softwares and hardwares would also be introduced and described accordingly. Sections 2 and 3 are accompanied with a visual catalogue of students’ projects to better illustrate the diversity in the understanding and implementation of computer vision and augmented reality technologies in architectural design. Section 4 serves to conclude the paper by first discussing briefly the feedback from students at the end of the course before clarifying the context of the research and thus its relation to recent work done by others using similar technologies.
wos	WOS:000351496100042
keywords	Computer vision, Augmented reality, Generative design, Interaction design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201310202
id	ijac201310202
authors	Leidi, Michele; Arno Schlüter
year	2013
title	Exploring Urban Space: Volumetric Site Analysis for Conceptual Design in the Urban Context
source	International Journal of Architectural Computing vol. 11 - no. 2, 157-182
summary	This paper proposes a set of new analytic and visualization methods for conceptual design in the urban context. The methodology is based on the discretization of the urban site into a volumetric grid of points. For each of these points, different physical properties such as solar radiation, airflow, and visibility are computed. Subsequently interactive visualization techniques allow the observation of the site at a volumetric, directional and dynamic level, making visible information that is typically invisible. Several case-studies demonstrate how this allows to generate suggestions, for example, for the definition of the form of a building or for the rationalization of its surfaces. This approach aims at developing a conceptual design process that allows the fusion of active technologies, passive methods, and expressive aspects, in cohesive concepts able to embrace and exploit the diversities of an urban site.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013_127
id	ecaade2013_127
authors	Lückert, Angelika; Koch, Volker and von Both, Petra
year	2013
title	Dances with Architects
doi	https://doi.org/10.52842/conf.ecaade.2013.2.587
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 587-594
summary	This paper proposes a complementary approach for the architectural design studio. By interpreting architecture by means of an interactive (dance) performance as design task it combines architectural theoretical examination with the implementation of new technologies and event realization. This design studio concept integrates scenography, choreography, sound design and event management, providing workshops carried out by external and internal experts to give insight into these disciplines and new tools. The experimental form allows the students to define the specific form within a broad scope, ranging from a dance performance performed by the students themselves to an interactive installation. The focus for the students was on dealing with the diverse input and on the decision-making process and its reflection.
wos	WOS:000340643600060
keywords	Interactive; performance; teaching; collaboration; gesture control.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2013_161
id	caadria2013_161
authors	Manferdini, Elena and Anna Maria Manferdini
year	2013
title	Tempera
doi	https://doi.org/10.52842/conf.caadria.2013.883
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 883-892
summary	This paper explores the characteristics of painting developed during the Nineteenth century, and specifically updates the use of matter and brushing techniques invented by a group of painters called “Impressionists”. In that period, impressionist artists began to brush “tempera” on a canvas as a malleable matter able to emphasize an accurate depiction of light in its changing qualities. Thick brush strokes left on the painted surface revealed the master’ gesture and completely changed the way to represent reality. Stimulated by the recent advancements in digital technologies, this paper looks for methodologies able to transfer impressionistic painterly innovation into a contemporary digital 3D environment and investigates how paint behaves when morphing from a photorealistic depiction of Nature to a disfigured one. In particular, reality-based 3D information, first frozen by a laser scanner into a digital geometry, slowly melts into liquid paint on a colour palette. While colours mix, the geometrical matter that constitutes the photorealistic scanned reality and its details disappear into primitive paint clog that are mixed and brushed into new colours and shapes able to create novel atmospheric and chromatic effects.
wos	WOS:000351496100091
keywords	Tempera, Laser scanner, 3D painting effects, Design creativity
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2013r_017
id	ecaade2013r_017
authors	Meghna, Saiqa I.; Chowdhury, Suvro S.
year	2013
title	Contextual customization of design process. Design through the digital and the material
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 205-216
summary	In contemporary world, digital technologies have initiated new architectural languages and have eased the way to communicate them directly from initial design phase to production facilities, allowing for the construction of complex geometries with the use of ever evolving techniques and tools. When the emergence of a substance depends on the material behavior, the design interest shifts towards the ‘formation’ instead of the ‘final form’. Regarding these the design procedures will be discussed from the premise where architecture will be perceived through an evolution process that deals with the coherent variables of elements and shifting parameters within a context. However, there are crucial questions about its application in the contexts which have lower access to contemporary technologies although digital technology has already influenced almost every aspects of the culture of the respective context. Besides, the huge production cost has limited its adaptability in many under developed and developing countries where the construction field relies mainly on traditional and low-tech methods. The paper is an effort to give attention on exploration of the new-found freedoms of material computation in close connection with the respective context by inventing new design processes, material applications and custom devices. It is the time to experiment with flexible, mobile and low-cost fabrication methods applicable to different scenarios while achieving the complexity of the contemporary architectural ge¬ometries. Thus an equal focus has to be given to speculate about projects that are site-specific, custom¬ized and adapted to local climatic conditions and technical know-how, in areas that traditionally have limited access to new technologies.
keywords	Complex geometries, material behavior, custom devices, low-cost fabrication, design process
email
last changed	2013/10/07 19:08

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2022_000
id	ecaade2022_000
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2022.1
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, 672 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2022_001
id	ecaade2022_001
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design- Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2022.2
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, 646 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
keywords	Proceedings, Front Matter
series	eCAADe
email
last changed	2024/04/22 07:10

_id	sigradi2013_52
id	sigradi2013_52
authors	Rivera, Omar; Alexis Salinas; Paula Ulloa; Oscar Otárola; Braulio Gatica; William Fuentes; Rodrigo García Alvarado; Mauro Chiarella
year	2013
title	Emprendimiento de Componentes Constructivos Paramétricos [Entrepreneurship of Building Parametric Components]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 244 - 248
summary	New technologies of parametric design and digital fabrication encourages development of building components, involving a new approach to architectural work and promote professional endeavors. This paper presents several experiences of recent graduates of architecture in U. Bio-Bio, Chile, which demonstrate these capabilities. The development of a roof module, a structural grid, a flexible envelope, cutting partitions and folded units for wind protection are examples of mass-customization, with implementation of new processes of design, construction and divulgation into the building industry.
keywords	Parametric Design, Digital Fabrication, Building Construction, Entrepreneurship, Innovative Architecture
series	SIGRADI
email
last changed	2016/03/10 09:58

For more results click below: