Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_137
id	ecaade2013_137
authors	Camporeale, Patricia
year	2013
title	Genetic Algorithms Applied to Urban Growth Optimization
doi	https://doi.org/10.52842/conf.ecaade.2013.2.227
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 227-236
summary	This work is a research on the application of genetic algorithms (GA) to urban growth taking into account the optimization of solar envelope and sunlight in open spaces.It was considered a typical block of a Spanish grid, which is the most common subdivision of the urban land in towns situated in Argentina. Two models are compared, one in which the growth has no more limitations than building codes. The other one, in which the growth incorporates the solar radiation as a desirable parameter.This way of parameterizing configures a bottom-up method of urban growth. No top-down decisions intervenes in the growth process.This tool proves to be useful at early stages of urban planning when decisions—which will influence along the development of the city for a long time—are taken.
wos	WOS:000340643600022
keywords	Genetic algorithms; solar envelope.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2013_220
id	caadria2013_220
authors	Chaszar, André and José Nuno Beirão
year	2013
title	Feature Recognition and Clustering for Urban Modelling – Exploration and Analysis in GIS and CAD
doi	https://doi.org/10.52842/conf.caadria.2013.601
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 601-610
summary	In urban planning exploration and analysis assist the generation, measurement, interpretation and management of the modelled urban environments. This frequently involves categorisation of model elements and identification of element types. Such designation of elements can be achieved through attribution (e.g. ‘tagging’ or ‘layering’) or direct selection by model users. However, for large, complex models the number and arrangement of elements makes these approaches impractical in terms of time/effort and accuracy. This is particularly true of models which include substantial numbers of elements representing existing urban fabric, rather than only newly generated elements (which might be automatically attributed during the generation process). We present methods for identification and categorisation of model elements in models of existing and proposed urban agglomerations. We also suggest how these methods can enable exploration of models, discovery of identities and relationships not otherwise obvious, and acquisition of insights to the models’ structure and contents which are not captured, and may even be obscured, by manual selection or automated pre-attribution.
wos	WOS:000351496100059
keywords	City information modelling, Data mining, Feature recognition, Geometric-content-based-search, Urban typologies
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2013_306
id	cf2013_306
authors	Dai, Qun and Marc Aurel Schnabel
year	2013
title	Relationship between Mean Radiant Temperature and Building Type for Pedestrians in Rotterdam
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 306-314.
summary	Outdoor thermal comfort for pedestrians becomes important issues in urban planning affecting everyone’s daily lives. Mean Radiant Temperature (T mrt ) is one of the most important parameters in micro climate. In this study, we built a computerised model with variable and typical building types. Then a radiation model SOLWEIG was used to simulate pavements’ T mrt spatial variations. We analysed and discussed the simulation results by comparing different building types. We used RayMan to find some relationship between thermal comfort index PET or PMV. Our finding can act as a reference for architects and planners to make design decisions on quantifying the thermal comfort in specific urban environment and their building types.
keywords	Mean radiant temperature (T mrt ), pedestrians, thermal comfort index, spatial variations
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
wos	WOS:000340635300027
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2013_210
id	cf2013_210
authors	Schubert, Gerhard; Sebastian Riedel, and Frank Petzold
year	2013
title	Seamfully Connected: Real Working Models as Tangible Interfaces for Architectural Design
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 210-221.
summary	This paper describes work conducted as part of an interdisciplinary research project into new approaches to using computer technology in the early phases of the architectural design process. The aim is to reduce the existing discrepancy between familiar, analogue ways of working in the early design stages and the increasingly widespread use of digital tools in office practice. Taking this as its starting point, a prototype for a design platform was developed. The core of the project is a direct, real-time connection between real volumetric models, an interactive 3D sketching-tool and interactive digital content that supports the design process. The conceptual and technical core of this connection is an integrated object recognition system. In this paper we describe the need for an integrated solution, the underlying conceptual idea and the recognition methods implemented including their respective strengths and limitations.
keywords	Design Tool, Urban Design, Early Design Stages, HCI
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
wos	WOS:000361385100030
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_212
id	ecaade2013_212
authors	Beirão, José and Arrobas, Pedro
year	2013
title	Interactive Urban Parametric Design
doi	https://doi.org/10.52842/conf.ecaade.2013.1.291
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 291-299
summary	This paper presents the use of a City Information Modeling (CIM) platform composed of a GIS platform, a SQL database, a CAD design interface and a VPI used to develop the parametric models of possible development scenarios. It calculates urban indicators and measurable design properties in order to better understand and support choices while making design decisions. Such approach improves the generation of alternative scenarios projections supported by the calculation of urban properties.
wos	WOS:000340635300030
keywords	Flexible planning; parametric urban design; alternative scenarios.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	sigradi2013_261
id	sigradi2013_261
authors	Dezen-Kempter, Eloisa
year	2013
title	Urbanidade 360º – Explorando Ferramentas Interativas [Urbanity 360 degrees - Exploring Interactive tools]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 586 - 589
summary	The emergence of new social codes and knowledge, including on new technologies of information and communication, has changed our gaze in the new and complex order of the city and the everyday experience of the people. In this article, we show how the user friendly software like Google Earth, Google Maps and the 3D modeling program SketchUP were used to explore urbanity in a current research with high schools students at University of Campinas (Unicamp). This research had as the main objective to integrate geometric aspects into simulation of urban development and environmental impacts.
keywords	Urbanity; Digital model; Urban simulation; Urban typologies
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
wos	WOS:000340643600049
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2013_338
id	cf2013_338
authors	Hua, Hao
year	2013
title	Multiplying Architectural Layouts and 3D Forms: Interplay of Necessity and Contingency in Architectural Modeling
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 338-346.
summary	Since 1960s there were many models for architectural layout planning which formulated design activities as problem-solving. On the other hand, various form-finding models had emerged after 1980s. The former seeks the necessity of architectural modeling as an objective science, while the latter encourages the contingent characters of individual modeling. This paper proposes a method of integrating the two families of models. A commutation channel is defined thus every member in one family can work with any member in the other. Therefore the models of architectural layouts can “multiple” the models of 3D forms, which leads to rich variety of architectural structures and forms. The method is implemented and tested in Java.
keywords	layout, form, necessity, contingency
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2013_208
id	caadria2013_208
authors	Kim, Jong Bum; Mark J. Clayton and Wei Yan
year	2013
title	Parameterize Urban Design Codes with BIM and Object-Oriented Programming
doi	https://doi.org/10.52842/conf.caadria.2013.033
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 33-42
summary	There has been a significant need for the new urban design apparatus that carries out performance analyses of the urban models, since the code reform movements focused on the sustainable urban developments. This research explores the use of parametric Building Information Modeling to enable stakeholders to intuitively understand the implications and consequences of urban design codes. We investigate whether key regulations can be captured as algorithms and ontologies in parametric BIM and Object-Oriented Programming. Then we present our prototype of parametric urban models in a BIM platform that explains (1) the extent which urban design code information can be parameterized in BIM and (2) the methods how parametric models can hold code information. The results show that our prototype enables real-time manipulations of code requirements and interactive visualization of code allowances.
wos	WOS:000351496100004
keywords	Parametric modelling, BIM, Object-oriented programming, Urban design codes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2013_197
id	ecaade2013_197
authors	Koenig, Reinhard; Treyer, Lukas and Schmitt, Gerhard
year	2013
title	Graphical Smalltalk with My Optimization System for Urban Planning Tasks
doi	https://doi.org/10.52842/conf.ecaade.2013.2.195
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 195-203
summary	Based on the description of a conceptual framework for the representation of planning problems on various scales, we introduce an evolutionary design optimization system. This system is exemplified by means of the generation of street networks with locally defined properties for centrality. We show three different scenarios for planning requirements and evaluate the resulting structures with respect to the requirements of our framework. Finally the potentials and challenges of the presented approach are discussed in detail.
wos	WOS:000340643600019
keywords	Design optimization; interactive planning support system; generative system integration; evolutionary multi-criteria optimization.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013r_009
id	ecaade2013r_009
authors	Orsi, Francesco; Fiorito, Stefano
year	2013
title	Learning from vernacular
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 115-120
summary	By looking at time-tested recurrent design patterns drawn from Portuguese vernacular settlements, the present research tries to address the problem of developing sustainable urban solutions for scattered low density territories throughout Portugal. The research departs from the hypothesis that Portuguese vernacular settlements contain morphological characteristics that can be captured and reused in new designs: this may be particularly useful for rethinking extensive suburban territories’ densification conditions, in order to enhance both their consistency and sustainability. Urban sprawl and uncontrolled space consumption have often hastened the problem of territorial sustainability, that’s the reason why completing, restructuring and enhancing dispersed built environments is of paramount importance in order to foster both cultural and economical sustainability in contemporary Portugal. This project ultimately aims at contributing towards the definition of design procedures and planning tools for the re-urbanization of extensive urban fabrics. One of the major objectives is developing a decision making support tool for generating meaningful and coherent interventions in dispersed urban fabrics which could foster connectivity, integration and quality of life, by doing so this work tries to propose a novel methodology that could prove to be valuable in different contexts, even outside Portugal.
keywords	Generative patterns; Vernacular urbanism; Bottom-up processes; Re-urbanization; Territorial sustainability
email
last changed	2013/10/07 19:08

_id	ecaade2013_178
id	ecaade2013_178
authors	Pak, Burak and Verbeke, Johan
year	2013
title	Walkability as a Performance Indicator for Urban Spaces
doi	https://doi.org/10.52842/conf.ecaade.2013.1.423
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 423-432
summary	This paper frames walkability as a performance indicator for urban spaces and critically addresses some of the existing evaluation methods. It introduces alternative strategies and tools for enabling the collective evaluation of walkability and discusses how experiences of the citizens can possibly lead to a social construct of walkability. This discussion is elaborated by a pilot study which includes exploratory research, social-geographic web services and heat maps. Using these tools and methods, it was possible to derive various experiential and environmental spatial qualities, extract problems and identify problematic areas. From these we have learned that walkability may serve as a fruitful conversation framework and a participatory research concept. Furthermore, we were able to develop ideas for solutions to design and planning problems.
wos	WOS:000340635300044
keywords	Walkability; experiential knowledge; collective mapping; social web.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2022_000
id	ecaade2022_000
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2022.1
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, 672 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2022_001
id	ecaade2022_001
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design- Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2022.2
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, 646 p.
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
keywords	Proceedings, Front Matter
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia13_439
id	acadia13_439
authors	PanahiKazemi, Lila; Rossi, Andrea
year	2013
title	Spatializing the Social: Computational strategies for integrated design in informal areas in Istanbul
doi	https://doi.org/10.52842/conf.acadia.2013.439
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 439-440
summary	This research proposes a set of architectural and urban strategies to deal with the issue of intervention in informal settlements, informed and empowered by the use of computational tools for modelling and simulation. The global aim is to find possible ways to integrate bottom-up self-construction processes with top-down planning regulations, creating an interface to generate and discuss developments between citizens and planners.
keywords	Social Forms; informal settlements; urban simulation; Istanbul; interactive planning; participative urbanism
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 08:00

_id	cf2013_286
id	cf2013_286
authors	Pang, Lei; Xiaodong Song, and Chengyu Sun
year	2013
title	Computer Aided Simulation for Compact Residential Regulatory Plan
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 286-294.
summary	Residential land development requires compact and intelligent growth in order to conserve land, especially in countries such as China with a large population but little usable land for built environment. This should not be done at the expense of public green space. Living density is an important issue that cannot be avoided in the urbanization process. This research uses Spatial Form Compact as the goal of trying to support the residential regulatory plan. A prototype site has been chosen to optimize the layout. Suppose the type of residential building had been decided and FAR is given as a premise. This method allows the arrangement of residential buildings to be compact and leads to more available space for concentrated green area, for example parks or other facilities. The BL-based method of genetic algorithm and VB program is used for the optimization and calculation of the prototype. The arrangement of residential buildings which is done by computer in this period is only used to explore the relationship between FAR and reasonable building layout. In order to guide the real construction of the building, the site plan should be done further elaborately under the guidance of regulatory plan by the developer and urban planner.
keywords	Compact, Residential area, FAR, Concentrated Green Space
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email
last changed	2013/10/07 19:08

For more results click below: