Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_039
id	ecaade2013_039
authors	Papadonikolaki, Eleni; Koutamanis, Alexander and Wamelink, J. W. F. (Hans)
year	2013
title	Attaining Performance with Building Information Modelling
doi	https://doi.org/10.52842/conf.ecaade.2013.2.475
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 475-483
summary	The paper presents the findings of a systematic literature review of approximately 200 scientific sources. It is designed with the aim to identify the current benefits and factors of high performance in Architecture, Engineering, Construction (AEC) since the introduction of Building Information Modelling (BIM). We formed and confirmed two main propositions associating the performance of the AEC to the use of BIM. The mapping of the current impact and benefits of BIM showed that the role of the managers, suppliers, owners and authorities is underestimated, as well as the initiation and use stage of project development. At the same time, the performance in the AEC industry can be improved by an array of possibilities where IT research and policy-making authorities contribute – from establishing new collaboration protocols until improving existing or creating new BIM tools.
wos	WOS:000340643600048
keywords	Building Information Modelling (BIM); Architecture, Engineering and Construction (AEC); supply chain management; life-cycle phases; stakeholders.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2013_238
id	sigradi2013_238
authors	Lima, Fernando; Vinícius Morais; Frederico Braida; Raiane Duque
year	2013
title	Protótipo Virtual a partir da Plataforma BIM: Uma Base Digital de Dados para Estudos Simulativos de Cenários Ambientais e Mapeamento de Infra-estrutura [Virtual Prototype from the BIM platform: A digital Database for Environmental Simulation Studies and Infrastructure Mapping]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 297 - 301
summary	In this article is presented some results of the studies and data obtained in the undergraduates’ research project linked to the Architecture and Urbanism curse of the Federal University of Juiz de Fora (UFJF), in which a digital evaluative approach of environmental performance of buildings in the campus is pursued. In this paper is reported the unfolding of this research project that aims to develop a virtual prototype in Building Information Modelling platform of a campus construction, and its application in environmental simulation studies as well as the management of the building´s information as-built.
keywords	Virtual Prototype; Building Information Modeling; Simulation Studies
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_364
id	sigradi2013_364
authors	Maing, Minjung; Rodrigo Vargas
year	2013
title	Digital Fabrication Processes of Mass Customized Building Facades in Global Practice
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 415 - 419
summary	This paper describes the process of digital design and fabrication for customized building facades and effects from highly customized configurations in U.S., major manufacturing power of China, and emerging construction in Asia and South America. Case studies are presented to form comparisons of technology adoption to project workflow in these three global contexts. Although integration of digital fabrication has shown signs of success in U.S., traditional practices of limited digital information exchange are commonplace in Asia and South America. With focus on adoption of new fabrication tools, BIM and larger production capacity, the potential benefits of digital fabrication are imminent.
keywords	Digital fabrication; Building facades; Mass customization; Curtain wall; BIM
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2013_063
id	caadria2013_063
authors	Markova, Stanimira; Andreas Dieckmann and Peter Russell
year	2013
title	Custom IFC Material Extension – Extending IFC for Parametric Sustainable Building Design
doi	https://doi.org/10.52842/conf.caadria.2013.013
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 13-22
summary	The enormous variety of design systems and data formats utilised by the actors in the building design process has been recognised as a significant challenge for information exchange and project management. The introduction of the Industry Foundation Classes (IFC) data standard as a paradigm shift has opened a first time opportunity for smooth data and information exchange over the full range of design related parameters and processes, reaching beyond the classical constructional, economic and safety-related requirements. Moreover, IFC allows for the extension of the standard in further areas, corresponding to the specific design, project or client requirements. These user-driven extensions often close an important gap of the IFC standard and can subsequently be imbedded in new releases of the IFC data standard. This paper is focused on the extension of IFC for the purposes of controlling and managing material use, increasing material efficiency and closing material cycles over the life cycle of a building. Material efficiency is defined by the design scopes of material recyclability, element reusability and waste reduction. The practical implications of the data format extension and design-check performance are examined on the level of the data model and, subsequently, on the level of proprietary Building Information Modelling (BIM) software, based on a pre-defined case.
wos	WOS:000351496100002
keywords	Material efficient building design, IFC, Parametric design, Semantic design, BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2013_185
id	ecaade2013_185
authors	Zají_ková, Veronika and Achten, Henri
year	2013
title	Landscape Information Modeling
doi	https://doi.org/10.52842/conf.ecaade.2013.2.515
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 515-523
summary	In this paper we report on a recently started PhD project in which we investigate the extension of the concept of “Building Information Model” (BIM) to the domain of landscape design. The potential benefits of BIM in the field of architecture have been reported many times (e.g., Ibrahim et al., 2004; Eastman et al., 2008; Abdelmohsen et al., 2011). However, in landscape design an information model in the way of BIM seems to be missing. Benefits of a Landscape Information Model would be (a) formalisation of knowledge in landscape design; (b) information model to support multiple participants in landscape design; (c) improved information exchange between landscape design, architecture, and urban design. In this paper we set out the basic outline of the research.
wos	WOS:000340643600052
keywords	BIM; landscape design; LIM.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
wos	WOS:000340643600051
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2013_184
id	sigradi2013_184
authors	de Sousa Checcucci, Érica; Ana Paula Carvalho Pereira; Arivaldo Leão de Amorim
year	2013
title	Modelagem da Informação da Construção (BIM) no Ensino de Arquitetura [Building Information Modeling (BIM) on Architecture Teaching]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 307 - 311
summary	This paper discusses the experience of the initial phase of introduction of the BIM paradigm in the undergraduate program in Architecture and Urbanism (evening course) of FAUFBA. We started from the premise that BIM should be adopted gradually and integrated with the various subjects of the course, and should be initiated through the disciplines of graphic representation. The proposal for this course is presented and practices are discussed, as they were experienced in the discipline of Computing and Design II, which deals with this paradigm. It was observed that BIM process requires significant changes, as it encountered some initial resistance from the students. However, this approach increases the understanding of building and facilitates the project documentation. Furthermore, the understanding of the scope of the paradigm was crucial to the effective use of the adopted tool.
keywords	Architectural education; Building Information Modeling (BIM); TIC; Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013_076
id	ecaade2013_076
authors	Dolas, Caner; Dieckmann, Andreas and Russell, Peter
year	2013
title	Building Your Own Urban Tool Kit
doi	https://doi.org/10.52842/conf.ecaade.2013.2.485
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 485-493
summary	The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building geometry, patterning of different building types, early numerical and graphical design evaluation, various simulation methods and the exploration of design alternatives. The toolset consists of the most common building shapes, but can be extended with additional shapes and their respective area and volumetric calculations when necessary. The rapid large-scale deployment of the components has been achieved by diverting existing tools from their intended use.
wos	WOS:000340643600049
keywords	BIM; urban planning; early design; rule-based design; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013_213
id	ecaade2013_213
authors	Ebertshäuser, Sebastian and von Both, Petra
year	2013
title	ifcModelCheck
doi	https://doi.org/10.52842/conf.ecaade.2013.2.525
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 525-534
summary	On behalf of the BBR (German Federal Office for Building and Regional Planning) the development of an Industry Foundation Classes (IFC) based inspection tool was accomplished as application on an underlying work-in-progress development framework. By providing a machine-based checking process the tool ModelCheck was rolled out to meet demands emerged during pilot projecting. Thus it is capable of processing automated compliance checks on quality criteria for the authorities, e.g. documentation guidelines of BBR regarding building and real estate documentation or building information modeling (BIM) quality criteria formed for the Humboldt-Forum project – a BIM pilot-project managed by BBR. ModelCheck supports checks on IFC models - formal against schemes and logical inspection with regards to alpha-numeric content by using xml-based configurable rules.
wos	WOS:000340643600053
keywords	BIM; quality assurance; rule-based model checking; collaboration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2013r_008
id	ecaade2013r_008
authors	Gargaro, Silvia; Fioravanti, Stefano
year	2013
title	Traditions based on context. How context ontologies can help archaeological sites.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 105-114
summary	Nowadays ICT tools are part of the cultural tradition of designers and over time have replaced pencil and paper in design development. The application programs for design are many and for different purposes, but the role and importance of Context often are underestimated. For new tradition, it needs “Context Knowledge Model” based on ontologies for the management of buildings and preservation and enhancement of cultural heritage with technological innovation. Context modeling gives the opportunity to address the management of pre-existing building in a conscious way. The interoperability of data and knowledge of Context is important to analyze the quality of building process. This is based on standard concepts of the project for the recovery and restoration of the buildings starting from knowledge of context. The goal of this research is to exploit information technology to advance and define knowledge of context monitoring, management and maintenance of historic buildings. The representation of context is important to understand physical, social, economic and normative Context in which the building was placed. The process used to analyze Context entities were Ontologies. This theoretical model will be applied to underground archaeological Roman sites, to implement semantic levels in IFC and BIM for building design.
keywords	Archaeological sites, Collaborative design, Context, Ontology, Design Process
email
last changed	2013/10/07 19:08

_id	caadria2013_208
id	caadria2013_208
authors	Kim, Jong Bum; Mark J. Clayton and Wei Yan
year	2013
title	Parameterize Urban Design Codes with BIM and Object-Oriented Programming
doi	https://doi.org/10.52842/conf.caadria.2013.033
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 33-42
summary	There has been a significant need for the new urban design apparatus that carries out performance analyses of the urban models, since the code reform movements focused on the sustainable urban developments. This research explores the use of parametric Building Information Modeling to enable stakeholders to intuitively understand the implications and consequences of urban design codes. We investigate whether key regulations can be captured as algorithms and ontologies in parametric BIM and Object-Oriented Programming. Then we present our prototype of parametric urban models in a BIM platform that explains (1) the extent which urban design code information can be parameterized in BIM and (2) the methods how parametric models can hold code information. The results show that our prototype enables real-time manipulations of code requirements and interactive visualization of code allowances.
wos	WOS:000351496100004
keywords	Parametric modelling, BIM, Object-oriented programming, Urban design codes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ijac201311302
id	ijac201311302
authors	Meagher, Mark; David van der Maas, Christian Abegg, Jeffrey Huang
year	2013
title	Dynamic ornament: An investigation of responsive thermochromic surfaces in architecture
source	International Journal of Architectural Computing vol. 11 - no. 3, 301-318
summary	This paper describes the use of environmental sensor data as a basis for the design of architectural ornament that takes on a distinctive appearance in response to the atmospheric conditions where it is located. Among the goals of the project were the identification of inexpensive fabrication methods that could be used to build responsive surfaces at the scale of a room, and the identification of material and tectonic strategies for integrating dynamic information displays in buildings. A series of prototypes were constructed to explore the benefits and limitations of thermochromic ink as a material for visualizing dynamic data, and a method is proposed for building thermochromic surfaces based on printed circuit boards (PCB's) that is cost-effective and allows the fabrication of large surfaces through tiling. The limitations of this method include high power consumption, a short lifespan and difficulties in controlling the surface temperature.
series	journal
last changed	2019/05/24 09:55

_id	caadria2013_140
id	caadria2013_140
authors	Park, Juhong and Takehiko Nagakura
year	2013
title	A Thousand BIM – A Rapid Value-Simulation Approach to Developing a BIM Tool for Supporting Collaboration During Schematic Design
doi	https://doi.org/10.52842/conf.caadria.2013.023
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 23-32
summary	A typical architectural design project proceeds as collaboration among professionals who have different expertise, values and priorities. The collaboration is needed to make designs both rich yet feasible, but the professionally different ways of thinking can also be a block on the way of design development. This paper takes the example of the relationship between developers and architects, who tend to have different evaluation criteria, methods, and processes. A BIM-based tool, A Thousand BIM, is introduced as a means to quickly generate possible building typologies on a given project site, with computation of expected total values expressed in simple financial terms. Its aim is to help a group of heterogeneous professionals to communicate in the same language, articulate criteria and priorities in multiple perspectives, and share rapidly simulated evaluations of schematic design variations. The implemented evaluation process considers construction cost per square foot, land value, and sustainability as well as other soft design values such as views and accessibility. It can take various market data as inputs to cost calculation, and the weight to each of the design values is dynamically adjustable. A professional can explicitly set them, and share the criteria, priorities, and results of value simulations with others in an enhanced collaborative process.
wos	WOS:000351496100003
keywords	BIM, Pro-forma, Design collaboration, Value simulation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	caadria2013_068
id	caadria2013_068
authors	Pedersen, Jens and Andy VanMater
year	2013
title	Resource Driven Urban Metabolism – How Can Metabolic Scaling be Used in Urban Design?
doi	https://doi.org/10.52842/conf.caadria.2013.561
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 561-570
summary	City scale projects are complex multivariable problems and have previously been addressed using a variety of organisational principles, whether it be the infrastructural grid, used by Ludwig Hilbersheimer in his project “Hochhausstadt” or the spinal organisation of the Tokyo Masterplan done by Kenzo Tange and the Metabolist Movement. This project strays from traditional methods of structuring a city and investigates a novel self-engineered anticipatory model, which focuses on the use of generative and genetic algorithms to develop a new associative system to develop coastal cities in arid climates. The system functions as a negative feedback loop, analysing existing conditions, and by a series of mathematical functions, projecting the new growth patterns for major components of a city, such as building envelopes, road networks, canal networks and public space distribution as a result of the cities internally generated resources.
wos	WOS:000351496100055
keywords	Computational design, Generative & evolutionary design, Tooling, City modelling, Urban metabolism
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia13_101
id	acadia13_101
authors	Rahmani Asl, Mohammad; Zarrinmehr, Saied; Yan, Wei
year	2013
title	Towards BIM-based Parametric Building Energy Performance Optimization
doi	https://doi.org/10.52842/conf.acadia.2013.101
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 101-108
summary	The demand for sustainable buildings with minimal environmental impact and efficient energy use is increasing. The most effective design decisions for sustainable design can be made in the early design phases, but appropriate tools to explore design alternatives and understand their impacts on building energy performance are not available at this stage of the project. The integration of Building Information Modeling (BIM) and parametric modeling is the new trend of building modeling, which can greatly benefit sustainable building design. This research introduces an innovative tool to facilitate integrated parametric BIM and to enhance its applications towards creative, sustainable building design through simulation and optimization. The created tool, Revit2GBSOpt, integrates parametric BIM and building energy performance simulation and enables designers to generate alternative options in BIM to explore the energy performance simulation results automatically. Finding the optimized solution, the BIM model will be updated.
keywords	Tools and Interface, Building Information Modeling (BIM), Parametric Simulation, Performance-based Design, Sustainable Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
wos	WOS:000340635300027
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: