Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013r_018
id	ecaade2013r_018
authors	Goyal, Akshay
year	2013
title	Field condition and the robotic urban landscapes
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 217-228
summary	The paper explores the concept of the ‘field condition’ in recent urban discourse and its implication with respect to emerging technologies in the domains of robotics and AI. The author argues that the notion of ‘field condition’ as one of ‘loosely bound aggregates characterized by porosity and local interconnectivity defined not by overarching geometrical schemas but by intricate local connections’1, has inherent limitations in its contemporary manifestation. The paper then discusses the discourse of the field theory in architecture & urbanism in context with recent developments in swarm robotics, modular self reconfiguring robotic systems and distributed intelligence. Recent design proposals that explore the idea of the city informed by such technologies are also analyzed. The author then argues for a ‘Robotic Urban Landscape’ that builds on the notion of the field as a possibility in the near future. In such a theoretical construct the city consists of a field of ‘nomadic’ mobile technological artifacts that respond to a complex set of parameters and act as a collective whole. The ‘robotic field condition’ in this respect has both physical and virtual dimensions, is both machinic and biological, and has fuzzy binary condition, effectively dematerializing its identity as part of the larger whole. Such fields of mini robots, which collectively are able to perform complex task systems, get intrinsically linked to the city fabric and result in a new urban ecology. The impact on the urban condition as a result of these ‘robotic fields’ of loosely bound mobile artificial constructs that respond in the mathematical matrix of urban ecology and socio economic parameters, is also discussed. Lastly the author suggests a provocative likelihood of a ‘singularity’ moment in light of these developments and the need to relook at contemporary architectural discourse
keywords	Field theory, robotics, artificial intelligence, robotic ecology, emerging technology, emergent urbanism
email
last changed	2013/10/07 19:08

_id	caadria2022_74
id	caadria2022_74
authors	Mazza, Domenico, Kocaturk, Tuba and Kaljevic, Sofija
year	2022
title	Geelong Digital Outdoor Museum (GDOM) - Photogrammetry as the Surface for a Portable Museum
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 677-686
doi	https://doi.org/10.52842/conf.caadria.2022.1.677
summary	This paper presents the development and evaluation of the Geelong Digital Outdoor Museum (GDOM) prototype accessible at https://gdom.mindlab.cloud. GDOM is a portable museum‚our novel adaptation of the distributed museum model (Stuedahl & Lowe, 2013) which uses mobile devices to present museum collections attached to physical sites. Our prototype defines a way for intangible heritage associated with tangible landscapes to be accessible via personal digital devices using 360 3D scanned digital replicas of physical landscapes (photogrammetric digital models). Our work aligns with efforts set out in the UN Sustainable Development Goal 11 (SDG 11) to safeguard cultural and natural heritage, by openly disseminating the heritage of physical sites seamlessly through the landscape. Using a research by design methodology we delivered our prototype as a modular web-based platform that leveraged the Matterport digital model platform. We qualitatively evaluated the prototype's usability and future development opportunities with 32 front-end users and 13 potential stakeholders. We received a wide gamut of responses that included: users feeling empowered by the greater accessibility, users finding a welcome common ground with comparable physical experiences, and users and potential stakeholders seeing the potential to re-create physical world experiences with modifications to the digital model along with on-site activation. Our potential stakeholders suggested ways in which GDOM could be integrated into the arts, education, and tourism to widen its utility and applicability. In future we see design potential in breaking out of the static presentation of the digital model and expanding our portable museum experience to work on-site as a complement to the remote experience. However, we recognise the way in which on-site activation integrate into users' typical activities can be tangential (McGookin et al., 2019) and this would necessitate further investigation into how to best integrate the experience on-site.
keywords	Cultural Heritage, Intangible Heritage, Digital Heritage, Web Platform, 3D Scanning, Photogrammetry, Digital model, Portable Museum, Distributed Museum, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	cf2013_222
id	cf2013_222
authors	Traunmueller Martin and Ava Fatah gen. Schieck
year	2013
title	Following the Voice of the Crowd: Exploring Opportunities for Using Global Voting Data to Enrich Local Urban Context
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 222-232.
summary	With the introduction of the internet to the public and the rise of digital technologies we experience a shift in our understanding of space. Mobile devices and ubiquitous computing in urban landscape make the physicality of distance disappear – the modern citizen is digitally connected to everybody at anytime and anywhere. The result of this network is a highly globalized world which effects economy same as personal interests and decisions of its inhabitants. The introduction of web 3.0 with its methods of comment, recommender and voting systems offers a broad platform for people all over the world to share experiences and exchange opinions about an unlimited variety of topics. Global opinions meet local interests. In this paper we explore the possibilities of using global voting data to enrich locally the modern citizen’s urban walking experience. We describe a new approach to wayfinding by implementing methods of digital recommender systems into the physical world. We investigate Facebook voting data to generate an alternative to the shortest route, as suggested by common route finder systems, in order to maximize the pleasure of an urban stroll. The testing of the system in a real world context together with collected feedback stimulate the discussions.
keywords	Wayfinding, Urban Pedestrian Navigation, Social Networks, Voting data, Mobile Devices, Recommendation Systems
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
wos	WOS:000361385100030
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_061
id	ecaade2013_061
authors	Ciftcioglu, Ozer and Bittermann, Michael S.
year	2013
title	Fusion of Perceptions in Architectural Design
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 335-344
doi	https://doi.org/10.52842/conf.ecaade.2013.2.335
wos	WOS:000340643600034
summary	A method for fusion of perceptions is presented. It is based on probabilistic treatment of perception, where perception quantifies the chance an unbiased observer sees an environmental object, and the associated probability can be interpreted as degree of awareness for the object. The approach uniquely accounts for the fact that final realization or remembrance of a scene in the brain may be absent or elusive, so that it is subject to probabilistic considerations. For objects that are to be perceived from multiple viewpoints, such as a sculpture in a museum, or a building in its urban context, the probabilistic approach uniquely defines the fusion of perceptions. This is accomplished by carrying out the probabilistic union of events. The computation is presented together with its geometric implications, which become rather intricate for multiple observers, whereas the computation is straight forward. The method is exemplified for two applications in architectural design at different scales, namely interior and urban design, indicating the generic nature as well as the large application potential of the method.
keywords	Perception; vision modeling; architectural design; evolutionary search.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2013_306
id	cf2013_306
authors	Dai, Qun and Marc Aurel Schnabel
year	2013
title	Relationship between Mean Radiant Temperature and Building Type for Pedestrians in Rotterdam
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 306-314.
summary	Outdoor thermal comfort for pedestrians becomes important issues in urban planning affecting everyone’s daily lives. Mean Radiant Temperature (T mrt ) is one of the most important parameters in micro climate. In this study, we built a computerised model with variable and typical building types. Then a radiation model SOLWEIG was used to simulate pavements’ T mrt spatial variations. We analysed and discussed the simulation results by comparing different building types. We used RayMan to find some relationship between thermal comfort index PET or PMV. Our finding can act as a reference for architects and planners to make design decisions on quantifying the thermal comfort in specific urban environment and their building types.
keywords	Mean radiant temperature (T mrt ), pedestrians, thermal comfort index, spatial variations
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_002
id	ecaade2013_002
authors	Hanzl, Ma_gorzata
year	2013
title	Modelling of Public Spaces
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 319-327
doi	https://doi.org/10.52842/conf.ecaade.2013.1.319
wos	WOS:000340635300033
summary	The relationship between the material settings and situational belonging to a more general notion of the culture of a given community remains the subject of inquiry of at least two scientific disciplines: anthropology and urban morphology studies. In this study an assessment of the various modelling platforms is performed with the objective of finding the most efficient method which allows the description of the semiotic features of urbanscapes. The ideal system should link the parametric definition of urban geometry with the high flexibility of data input and easy manipulation. In order to enable culture related analyses of urbanscapes, analyses should be performed which refers to the semiotics of morphological structures in the detailed scale of urban enclosure, which are streets or squares. Some elements of the proposed method of index key analyses are explained as one possible solution for the problems posed.
keywords	Urban design; urban morphology; anthropology; parametric modelling; outdoor space.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac201310204
id	ijac201310204
authors	Kontovourkis, Odysseas; Marios C. Phocas, George Tryfonos
year	2013
title	Prototyping of an Adaptive Structure based on Physical Conditions
source	International Journal of Architectural Computing vol. 11 - no. 2, 205-226
summary	Latest advances in digital architectural design enable applications of computation and fabrication strategies for the development of adaptive mechanisms. Adaptive design processes, influenced by environmental and human related conditions, are only developed partially with regard to the design, fabrication, and multi-objective performance based context. The current paper proposes an adaptive design process that investigates the design of a kinetic structure emphasizing material behaviour, embedded technology and computation. In parallel, it allows design proposals to adapt or transform with regard to geometrical configuration and structural behaviour according to external and internal influences. An adaptive hybrid structure is developed at digital and physical prototype level, where its behaviour is examined in real time under the influence of physical conditions. The development is based on a holistic design approach driven by environmental and human activity related conditions, while focusing on the application of elastic materials and embedded technology.
series	journal
last changed	2019/05/24 09:55

_id	cf2013_038
id	cf2013_038
authors	Lee, Ju Hyun; Ning Gu, Michael J. Ostwald, and Julie Jupp
year	2013
title	Understanding Cognitive Activities in Parametric Design
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 38-49.
summary	Parametric design offers a new paradigm in the field of ComputerAided Design; a paradigm focused on the potential for producing design variations. However, despite this potential, the cognitive activities associated with parametric design are not well understood. The authors of this paper present a formal method for capturing cognitive activities via protocol analysis. To support the interpretation of this method, this paper evaluates creativity implicit in design products by way of a consensual assessment technique. The findings identify two cognitive activities (‘making generation’ and ‘changing existing parameters’) as potential critical to divergent thinking and the restructuring of design components. These activities facilitate the generative aspects of parametric design. The paper concludes with a discussion of three cognitive levels (physical, perceptual and conceptual) that support an understanding of cognitive activities in parametric design.
keywords	Parametric design, CAD, Cognitive activity, Protocol analysis, Consensual assessment technique
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2013_033
id	caadria2013_033
authors	Nguyen, Danny D. and M. Hank Haeusler
year	2013
title	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.caadria.2013.365
wos	WOS:000351496100036
summary	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software The research presented in this paper investigates the need for an equivalent of architectural drawings for urban interaction design in an architectural scale in order to communicate interaction design intentions to design participants and clients through using state of the art computer, gaming and sensor technologies. The paper discusses two projects (a) Blur Building, as a large scale interaction design project executed through an experienced team and (b) presents as student design project coordinated by the researchers as a reference project. Both projects in this paper are discussed and evaluated from an Urban Interaction Design point of view. This paper emphasizes the significance for establishing ‘drawing’ equivalents for urban interaction design, discussing representation of ideas in architectural design; followed by outlining existing methods of interactive design representation, such as storyboards to then introduce current advancements in gaming environments. The following paper introduces a framework for future research projects that will design, deploy and evaluate of prototypes as a communication platform combining physical sensing devices in combination with gaming engines to enable a digital / physical hybrid. This would allow designers and clients to test, evaluate and improve urban interactions in a design phase prior to completing the project.
keywords	Spatial design, Human-computing interfacing, Interactive architecture, Smart environments, Sensor technology
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2013_043
id	ecaade2013_043
authors	Rua, Helena; Falcão, Ana Paula and Roxo, Ana Filipa
year	2013
title	Digital Models – Proposal for the Interactive Representation of Urban Centres
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 265-273
doi	https://doi.org/10.52842/conf.ecaade.2013.1.265
wos	WOS:000340635300027
summary	The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations) and 3D representations have been gradually replaced by 3D digital models that can reproduce buildings and places in a virtual environment.3D digital models are tools that enable a wide range of applications in urban planning and management, especially in architectural and data documentation where they allow the analysis of theoretical scenarios such as: 1) representation of the past, considering the procedures needed to restore the heritage; 2) visualisation of the present, to enable dissemination and communication of the city as it is; and, 3) simulation of the future, with the model being used to visualise and experiment with architectural objects, even those at a design stage. The main contribution of this work is to present an urban application developed into a GeoBIM tool, ESRI City Engine Software (CE), that integrates GIS (Geographic Information Systems) and BIM (Building Information Modelling) concepts. Finally, to enhance its potential, three spatial analyses were conducted.
keywords	3D model; GIS – Geographic Information System; BIM – Building Information Modelling; shape grammars; spatial analysis.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2013_205
id	caadria2013_205
authors	Shuvo, Faysal Kabir and Patrick Janssen
year	2013
title	Modelling Informal Settlements Using a Hybrid Automata Approach
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 591-600
doi	https://doi.org/10.52842/conf.caadria.2013.591
wos	WOS:000351496100058
summary	Automata based modeling of urban environments focuseson the bottom up emergence of particular phenomena through interactions at the disaggregated level. Two popular approachesare Cellular Automata (CA) for modelling fixed automata and Agent Based Modelling (ABM) for modelling mobile automata.However, certain urban phenomena cannot easily be modelled by either CA or ABM alone. This research focuses on one suchphenomenon, referred to as leap-frog development, which is a discontinuous and dispersed type of urban growth. A hybridautomata model is proposed for modelling such phenomena that combines both CA and ABM into a single integrated model. Theproposed model is demonstrated by applying it to a case-study in Dhaka city for simulating the growth of informalsettlements associated with the readymade garment industry.
keywords	Hybrid automata, GIS, Agentbased systems, Cellular automata, Informal settlements
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.1
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.2
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
doi	https://doi.org/10.52842/conf.caadria.2013
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2013_030
id	caadria2013_030
authors	Adamantidis, Ermis; Madhav Kidao and Marios Tsiliakos
year	2013
title	Siphonophore – A Physical Computing Simulation of Colonial Intelligence Organisms
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 355-364
doi	https://doi.org/10.52842/conf.caadria.2013.355
wos	WOS:000351496100035
summary	This paper sets out to document the procedural design and implementation of “Siphonophore” a multisensory digital ecology, mimicking colonial-ordered behaviour systems. The exploration of the notion of “self” in a complex system of highly integrated individuals with reference to the emergence of behaviours from the human-machine-context interaction, is engaged by this open system’s hierarchical articulation of electronics, Arduino boards, sensors and programming routines. User interaction and recorded statistics from the system’s core algorithm are assessed, in relation to the capacity of this prototype to provide an alternative methodology of describing collective intelligence, while presenting a non-standard perspective of body-space interaction and design as entertaining art. The overall impact is discussed in relation to the examined observations, towards a potential advancement to a system of superior contextual understanding.
keywords	Colonial intelligence, Multisensory installation, Physical computing, Spatial sensing, Human-machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_115
id	ecaade2013_115
authors	Barczik, Günter
year	2013
title	Continuous Oscillations
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 571-578
doi	https://doi.org/10.52842/conf.ecaade.2013.2.571
wos	WOS:000340643600058
summary	We present and discuss a didactic for augmenting architectural design education with computational design techniques via integrative feedback loops and show examples of student projects. Our goal is to embed new technical skills into existing design abilities as quickly as possible, in order to enable our students to exploit and explore the extended capabilities of digital design techniques within the framework of architectural design projects. We instigate a process of continuous mutual feedback between different fields: on the one hand between technique-based exercises and design-related steps, and on the other hand between the digital and the physical. Through oscillation and feedback, the newly learned skills are directly interwoven with the existing ones. Special emphasis is put on the illuminative effects of transitions between different media and on issues of fabrication.
keywords	Design curriculum; tools; shape studies.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
wos	WOS:000340635300055
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201310103
id	ijac201310103
authors	Bollmann, Dietrich and Alvaro Bonfiglio
year	2013
title	Design Constraint Systems - A Generative Approach to Architecture
source	International Journal of Architectural Computing vol. 11 - no. 1, 37-63
summary	Generative Architectural Design permits the automatic (or semiautomatic) generation of architectural objects for a wide range of applications, from archaeological research and reconstruction to digital sketching. In this paper the authors introduce design constraint systems (DCS), their approach to the generation of architectural design with the help of a simple example: The development of the necessary formalisms to generate a family of architectural designs, i.e. simple houses and pagodas. After explaining the formal system the authors introduce an approach for the generation of complex form based on the application of transformations and distortions.Architecture is bound by the constraints of physical reality: Gravitation and the properties of the used materials define the limits in which architectural design is possible. With the recent development of new materials and construction methods however, the ways in which form and physics go together get more complicated. As a result, the shapes of architecture gain more liberty, and more and more complex shapes and structures become possible.While these advances allow for new ways of architectural expression, they also make the design process much more challenging. For this reason new tools are necessary for making this complexity manageable for the architect and enable her to play and experiment with the new possibilities of complex shapes and structures. Design constraint systems can be used as tool for experimentation with complex form. Therefore, the authors dedicate the final part of this paper to a concise delineation of an approach for the generation of complex and irregular shapes and structures. While the examples used are simple, they give an idea of the generality of design constraint systems: By using a two-component approach to the generation of designs (the first component describes the abstract structure of the modelled objects while the second component interprets the structure and generates the actual geometric forms) and allowing the user to adjust both components freely, it can be adapted to all kind of different architectural styles, from historical to contemporary architecture.
series	journal
last changed	2019/05/24 09:55

For more results click below: