Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 597

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_234
id	sigradi2013_234
authors	Alencar, Viviane; Gabriela Celani
year	2013
title	The Art of Computer Graphics Programming: Translating Pioneer Programs
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 500 - 504
summary	Considering the importance of the use of programming languages for teaching computational design to architects, this paper proposes the translation of computer programs from a pioneer work in this field into a more contemporary programming language. The book The Art of Computer Graphics Programming: A Structured Introduction for Architects and Designers was published in 1987 by William J. Mitchell, Robin Ligget and Thomas Kvan, and remains an important reference for architects. The original Pascal codes in the book were translated into Processing, and made available through an Internet website, along with images and comments, in order to give late Prof. Mitchell’s work the consideration it deserves.
keywords	Processing; Pascal; Computer graphics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_023
id	ecaade2013_023
authors	Biloria, Nimish and Chang, Jia-Rey
year	2013
title	Hyper-Morphology
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 529-537
doi	https://doi.org/10.52842/conf.ecaade.2013.1.529
wos	WOS:000340635300055
summary	Hyper-Morphology is an on-going research outlining a bottom-up evolutionary design process based on autonomous cellular building components. The research interfaces critical operational traits of the natural world (Evolutionary Development Biology, Embryology and Cellular Differentiation) with Evolutionary Computational techniques driven design methodologies. In the Hyper-Morphology research, genetic sequences are considered as sets of locally coded relational associations between multiple factors such as the amount of components, material based constraints, and geometric adaptation/degrees of freedom based adaptation abilities etc, which are embedded autonomously within each HyperCell component. Collective intelligence driven decision-making processes are intrinsic to the Hyper-Morphology logic for intelligently operating with autonomous componential systems (akin to swarm systems). This subsequently results in user and activity centric global morphology generation in real-time. Practically, the Hyper-Morphology research focuses on a 24/7 economy loop wherein real-time adaptive spatial usage interfaces with contemporary culture of flexible living within spatial constraints in a rapidly urbanizing world.
keywords	Evo-devo; cellular differentiation; self-organization; evolutionary computation; adaptive architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_342
id	sigradi2013_342
authors	Bruscato, Underléa; Sandro J. Rigo; Cristiano A. Costa; Humberto J. M. Costa
year	2013
title	Visualização de Informações Geográficas no Turismo Ubíquo de Itinerários Culturais [Visualization of Geographic Information of Ubiquitous Tourism in Cultural Routes]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 153 - 157
summary	This paper presents a practical experience developed within the framework of a network of researchers dedicated to develop projects of technology transfer, training and research in the field of innovation, involving virtual reality, augmented reality and advanced interaction. The group develops visualization oriented technologies and aim to socialize the experiences developed. In this sense was created an Electronic Guide to cultural routes in southern Brazil, exploiting the contemporary concept of ubiquitous tourism, in which users access tourism content with mobile devices, using sensitivity to context, semantic web and advanced visualization, thus rescuing the memory and regional architectural heritage.
keywords	Ubiquitous tourism; Mobile computing, Memory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_065
id	ecaade2013_065
authors	Davila Delgado, Juan Manuel and Hofmeyer, Herm
year	2013
title	Automated Simulation and Study of Spatial-Structural Design Processes
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 155-164
doi	https://doi.org/10.52842/conf.ecaade.2013.2.155
wos	WOS:000340643600015
summary	A so-called “Design Process Investigation toolbox” (DPI toolbox), has been developed. It is a set of computational tools that simulate spatial-structural design processes. Its objectives are to study spatial-structural design processes and to support the involved actors. Two case-studies are presented which demonstrate how to: (1) study the influence of transformation methods on design instances and (2) study the influence of transformation methods on the behavior of other transformation methods. It was found that in design instances with the same type of structural elements the influence of a specifically varied transformation method is more explicit; while, when different types are present this influence is more undetermined. It was also found that the use of two specifically different structural modification methods have little influence on the sub-sequential spatial transformation method.
keywords	Design process research; design process simulation; spatial design; structural design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	cf2013_096
id	cf2013_096
authors	D´avila Delgado, Juan Manuel and Herm Hofmeyer
year	2013
title	Research Engine: A Tool to Simulate and Study Spatial-Structural Design Processes
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 96-108.
summary	The project’s objective is to study spatial-structural design processes and to support the involved actors; to that end a computational tool so-called Research Engine (RE) has been developed. The RE seeks to fulfill four aims: (1) to study the influence of transformations methods on design instances; (2) to study the influence of transformations methods on the behavior of other transformations methods; (3) to aid in finding “best compromised” or interesting spatial and structural design instances; and (4) to serve as design support tool, providing useful information in early stages of the design process. The paper describes the RE framework and its implementation. Case-studies are presented which showcase the RE’s capabilities and demonstrate that it does fulfill the previously stated aims.
keywords	design process research, design process simulation, spatial design, structural design
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ijac201311305
id	ijac201311305
authors	Esquivel, Gabriel; Dylan Weiser, Darren J Hartl, Daniel Whitten
year	2013
title	POP-OP: A Shape Memory-Based Morphing Wall
source	International Journal of Architectural Computing vol. 11 - no. 3, 347-362
summary	Recent tendencies in architecture take a unique point of view, with aesthetically novel and unnatural sensibilities emerging from a close scrutiny and study of apparently natural systems. These tendencies are being driven by mathematical and computational abstractions that transform the way we understand the matterinformation relationship. This project was inspired by Op Art, a twentieth century art movement and style in which artists sought to create an impression of movement on an image surface by means of an optical illusion. Passive elements consisting of composite laminates were produced with the goal of creating lightweight, semi-rigid, and nearly transparent pieces. The incorporation of active materials comprised a unique aspect of this project: the investigation of surface movement through controlled and repeatable deformation of the composite structure using shape memory alloy (SMA) wiring technology. The integration of composite materials with SMA wiring and Arduino automation control resulted in an architectural wall that incorporated perceptual and actual motion.
series	journal
last changed	2019/05/24 09:55

_id	caadria2021_412
id	caadria2021_412
authors	Estrina, Tatiana, Hui, Vincent and Ma, Lena
year	2021
title	The Digital Design Build - Modes of Experiential Learning in the Pandemic Era
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 41-50
doi	https://doi.org/10.52842/conf.caadria.2021.2.041
summary	In recent years, academia has deviated from the lecture-based model to a hybridized system of instruction and experiential learning. Experiential learning aids students in understanding collaborative processes in architectural praxis and exposes them to engaging learning opportunities, a critical component of architectural studio education (Nijholt et al. 2013). During the COVID-19 outbreak, students are barred from accessing on-campus facilities. This causes a redevelopment of curricular delivery and disrupts experiential learning which heavily relies on in-person interaction. It is imperative for instructors to retain experiential learning in the transition to virtual instruction. This paper explores experiential learning within virtual platforms for instruction. Through outlining the implementation of technologies, capitalizing on connectivity, and maximizing opportunity for digital problem solving, the authors posit a framework that other educators may adopt. The paper concludes with a case study of a virtual design-build project, and the various techniques implemented in retaining experiential learning during the pandemic.
keywords	Pedagogy; Experiential learning; Social connectivity; Resilience; Disrupted education
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia23_v1_128
id	acadia23_v1_128
authors	Fayyad, Iman
year	2023
title	Bending Cylinders: Geometries of the Anthropocene
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 128-135.
summary	Over the past several decades, the conception and construction of formal complexity has disregarded the realities of material waste, costs, and accessibility. By engaging the isometric relationship between flatness and three-dimensional form, the research shown here investigates how waste-conscious approaches to geometric innovation can create new architectural languages. Specifically, the work deploys a subset of curved-crease folding that uses planar reflections referred to as sectional mirror operations to create unique forms comprised of composite cylindrical and conical surfaces (Figure 1). Whereas known studies in curved-crease folding typically explore singular (one-off, figural) compositions (Davis et al. 2013), this process develops a module aggregation strategy to suggest large inhabitable structures as both figural and field-like conditions.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2013_006
id	caadria2013_006
authors	Gerber, David J. and Shih-Hsin (Eve) Lin
year	2013
title	Geometric Complexity and Energy Simulation – Evolving Performance Driven Architectural Form
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 87-96
doi	https://doi.org/10.52842/conf.caadria.2013.087
wos	WOS:000351496100009
summary	The research presents the custom development of a software tool and design process for integrating three design domains, their respective objectives, and geometric parameterizations. It then describes a set of experimental projects and analyses in the context of informing form and geometric complexity. Preliminary results of the multidisciplinary design optimization prototype, which, implements a genetic algorithm, are then presented. The findings include discussion of the value for architects for designing-in performance e.g. the bringing of the energy simulation and financial pro-forma upstream in the design process and of the value for trade off design decision making the system provides. The summary discussion includes the benefit of breeding architecturally complex geometries and the kinds of optimisations or search for improvements on designs that can be achieved.
keywords	Parametric, Generative, Optimisation, Design decision support
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2014_136
id	caadria2014_136
authors	Ham, Jeremy J. and Marc Aurel Schnabel
year	2014
title	Comparisons in Representational Media Use in Design Studios between Hong Kong and Australia
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 781–790
doi	https://doi.org/10.52842/conf.caadria.2014.781
summary	Representational media – analogue, physical, digital, or virtual – are employed by students in the conception, development and presentation. In 2013 a survey at two architectural schools was conducted to study the current representational media use in design studios. The survey examined the role digital and physical media play in students’ design work and how students use the various media to generate and communicate their designs. This study presents its importance through the shift in architectural education whereby digital tools are not taught per se any longer, however expected to be mastered throughout the course. Yet students’ learning experiences are strongly dependant on the successful acquisition of skills and its transfer to deep learning. Especially architectural design studios build upon the premises that rerepresentation leads to a better acquisition of knowledge. Architectural educators may use the study to revisit their studio and reposition the role of media as well as align learning outcomes, deliverables and communication tools with the actual working- and learning-styles of students.
keywords	Representational media; design studio; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-9-8]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/04/17 13:59

_id	acadia13_087
id	acadia13_087
authors	Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J.; Haberl, Jeff S.; Yan, Wei
year	2013
title	Visualization of Building Energy Performance in Building Information Models
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 87-92
doi	https://doi.org/10.52842/conf.acadia.2013.087
summary	This paper presents the results of research and development of Building Energy Simulation (BES) visualization methods. In this effort the authors used Building Information Modeling (BIM) Authoring Tools’ Application Programming Interface (API) to visualize BES results in BIM. We also used an external database to store and manage the object-based simulation results from a BES tool. Based on these methods, we created a prototype: Building Energy Performance Visualization (BEPV), which translates information from the result database to the Energy Performance Indicator (EPI) parameter in BIM. Using the prototype, when BIM models are created for building design, the building energy performance can be expressed visually as color-coding on the BIM, allowing users to see energy flows directly. The developed prototype lets architects use BIM as a common user interface for building design and performance visualization, and may improve their designs in early stages.
keywords	building information model, information visualization, interdisciplinary design, performance based design, simulation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2013_208
id	caadria2013_208
authors	Kim, Jong Bum; Mark J. Clayton and Wei Yan
year	2013
title	Parameterize Urban Design Codes with BIM and Object-Oriented Programming
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 33-42
doi	https://doi.org/10.52842/conf.caadria.2013.033
wos	WOS:000351496100004
summary	There has been a significant need for the new urban design apparatus that carries out performance analyses of the urban models, since the code reform movements focused on the sustainable urban developments. This research explores the use of parametric Building Information Modeling to enable stakeholders to intuitively understand the implications and consequences of urban design codes. We investigate whether key regulations can be captured as algorithms and ontologies in parametric BIM and Object-Oriented Programming. Then we present our prototype of parametric urban models in a BIM platform that explains (1) the extent which urban design code information can be parameterized in BIM and (2) the methods how parametric models can hold code information. The results show that our prototype enables real-time manipulations of code requirements and interactive visualization of code allowances.
keywords	Parametric modelling, BIM, Object-oriented programming, Urban design codes
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2013_026
id	ecaade2013_026
authors	Kucukoglu, J. Gozde and Colakoglu, Birgul
year	2013
title	Algorithmic Form Generation for Crochet Technique
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 273-278
doi	https://doi.org/10.52842/conf.ecaade.2013.2.273
wos	WOS:000340643600027
summary	In architecture use of generative computation suggests a possibility of rethinking the form finding process. In order to generate form, one method could be predefining first the production technique and constraining the form by the rules of it. In this study crochet-knitting technique is chosen as a production technique. To explore various forms developed through this technique; a computational model, which the behavior of crochet-knitted surface is embedded into, is developed. This paper explains the process of decoding the behavior of a crochet-knitted surface for a computational model in order to extract the crochet-knitting patterns of complex geometrical surfaces.
keywords	Form generation; crochet technique; hyperbolic geometry; decoding rule
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2013_038
id	cf2013_038
authors	Lee, Ju Hyun; Ning Gu, Michael J. Ostwald, and Julie Jupp
year	2013
title	Understanding Cognitive Activities in Parametric Design
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 38-49.
summary	Parametric design offers a new paradigm in the field of ComputerAided Design; a paradigm focused on the potential for producing design variations. However, despite this potential, the cognitive activities associated with parametric design are not well understood. The authors of this paper present a formal method for capturing cognitive activities via protocol analysis. To support the interpretation of this method, this paper evaluates creativity implicit in design products by way of a consensual assessment technique. The findings identify two cognitive activities (‘making generation’ and ‘changing existing parameters’) as potential critical to divergent thinking and the restructuring of design components. These activities facilitate the generative aspects of parametric design. The paper concludes with a discussion of three cognitive levels (physical, perceptual and conceptual) that support an understanding of cognitive activities in parametric design.
keywords	Parametric design, CAD, Cognitive activity, Protocol analysis, Consensual assessment technique
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013r_002
id	ecaade2013r_002
authors	Neves, Isabel C.; Rocha, J.
year	2013
title	The contribution of Tomas Maldonado to the scientific approach to design at the beginning of computational era. The case of the HfG of Ulm.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 39-50
summary	Nowadays the use of computational design processes in architecture is a common practice which is currently recovering a set of theories connected to computer science developed in the 60`s and 70`s. Back then, such pioneering experiences were carried out by an interest in employing scientific principles and methodologies in architectural design, which, with the help of computers, were developed in Research Centres mainly located in the USA and the UK. Looking into this period, this paper investigates the relevance of the German design school of the Hochschule für Gestaltung of Ulm to the birth of computation in architecture. Even though there were no computers in the school, this paper argues that the innovative pedagogies introduced by a group of distinct professors built clear foundations that can be understood as being at the basis of further computational approaches in architecture.This paper focuses on the remarkable work done by Tomas Maldonado. His contribution was paramount in the emergence of analogical ways of computer design thinking. This analysis ultimately wants to emphasize how the HfG Ulm’s role and its scientific approach have paved the way for the onset of the computational era in architecture.
keywords	HfG - Hochschule für Gestaltung Ulm; Educational Project; Semiotics; Operational Research; Computational Design; Architecture
email
last changed	2013/10/07 19:08

_id	ecaade2013_039
id	ecaade2013_039
authors	Papadonikolaki, Eleni; Koutamanis, Alexander and Wamelink, J. W. F. (Hans)
year	2013
title	Attaining Performance with Building Information Modelling
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 475-483
doi	https://doi.org/10.52842/conf.ecaade.2013.2.475
wos	WOS:000340643600048
summary	The paper presents the findings of a systematic literature review of approximately 200 scientific sources. It is designed with the aim to identify the current benefits and factors of high performance in Architecture, Engineering, Construction (AEC) since the introduction of Building Information Modelling (BIM). We formed and confirmed two main propositions associating the performance of the AEC to the use of BIM. The mapping of the current impact and benefits of BIM showed that the role of the managers, suppliers, owners and authorities is underestimated, as well as the initiation and use stage of project development. At the same time, the performance in the AEC industry can be improved by an array of possibilities where IT research and policy-making authorities contribute – from establishing new collaboration protocols until improving existing or creating new BIM tools.
keywords	Building Information Modelling (BIM); Architecture, Engineering and Construction (AEC); supply chain management; life-cycle phases; stakeholders.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia13_207
id	acadia13_207
authors	Sanchez, Jose
year	2013
title	Gamescapes
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 207-216
doi	https://doi.org/10.52842/conf.acadia.2013.207
summary	While parametrics and form-finding techniques focus on design as an idea of “search,” it is inevitable to wonder if the field is becoming stagnated, converging on similar “solutions” in an ever-shrinking design search space.Initiatives like Minecraft, coming from video game design, reopen the creative desires of players by providing a rigorous algorithmic set of rules and a fully open world coupling algorithmic design and intuition. This is what J.C.R. Licklider would call “man-computer symbiosis”(Licklider 1960).This paper presents how game mechanics suggest a radically different ethos for computational design thinking. It presents the Bloom project, commissioned for the London Olympics in 2012, which combines the use of industrially produced identical components with game mechanics. This project breaks the idea of serialized outcomes and suggests that within the search space of possible formations, there are unforeseeable assemblies and creative outcomes.The Bloom project has become a new research unit at UCL Bartlett, coupling notions of digital modular materials and crowd-farming for assembly, which positions gaming as a design heuristics to open the field of architectural design.
keywords	crowd search, game mechanics, combinatorics, open-ended, sandbox, intelligence augmentation.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

For more results click below: