Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	acadia14_531
id	acadia14_531
authors	Kalo, Ammar; Newsum, Michael Jake
year	2014
title	Bug-Out Fabrication: A Parallel Investigation using the Namib Darkling Beetle as a Biological Model and Incremental Sheet Metal Forming as a Fabrication Method.
doi	https://doi.org/10.52842/conf.acadia.2014.531
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp.531-538
summary	This paper presents a project that aims to capitalize on the interchanges between two independent yet concurrent design and fabrication studies. The research demonstrates pairing of design and fabrication workflows using a biological model from the Namib Darkling Beetle, as well as advancing the research on incremental sheet forming.
keywords	Incremental Sheet Forming, Namib Darkling Beetle, Computational Design, Fabrication, Sheet Metal, Shelter
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	acadia23_v2_294
id	acadia23_v2_294
authors	Matharu, Sumer; Crawford, Joe; Ohakim, Ugonna
year	2023
title	Techno Relics: A Framework for Computation, Materiality, and Fabrication in the Anthropocene
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 294-303.
summary	This paper explores the potential of material, computation, and fabrication methodologies broadly engaging a critical understanding of the human epoch, also known as the anthro- pocene era, and its impact on Earth’s geology. Man-made materials have arguably become ubiquitous and a massively distributed part of the environment, while also placing an involuntary burden on local ecologies. Nature has taken its course and swallowed these synthetic materials to create new compositions of complex conglomerations, thereby blur- ring the boundaries between the agency of man, nature, and technology (Corcoran et al. 2014). The discipline of architecture, too, must reconsider its own boundaries, and evolve to design and fabricate with these techno relics, defined here as a remnant of the techno- logical impact on our planet. In order to understand how these techno relics can be used by designers, this paper pres- ents a general framework for the research, discovery, and validation of computational and fabrication processes. This is done through the examination of the background research in using aluminum waste by leveraging pre-existing digital and physical processes. Furthermore, the paper situates the background work within the broader context of how these techno relics can be mined, or collected. This is done through the examination of a case study that follows plastic waste in the Pacific Northwest through an Indigenous lens, providing possible architectural solutions that are relevant to the building typology in the remote communities most affected.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	acadia23_v1_174
id	acadia23_v1_174
authors	Nejur, Andrei
year	2023
title	NoeudAL Pavilion: Ultralight folded nodes for bespoke geometries
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 174-179.
summary	This research project, conducted at the University of Montreal School of Architecture, presents an innovative approach to the construction of reticulated structures, focusing on the development and application of a novel, ultralight aluminum node. The node, constructed from a folded, laser-cut, 1-mm aluminum sheet, is designed to accommodate wooden linear members with varied rectangular sections, making it adaptable to bespoke geometries and low valence nodes. This innovative design offers a solution to the long-standing challenge in the construction industry of balancing cost, customization, and weight for reticulated structures through novel node designs (Abdelwahab and Tsavdaridis 2019; Dyvik et al. 2023; Chilton 2007; Rochas 2014; Hassani et al. 2020).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ijac201412407
id	ijac201412407
authors	Abdelmohsen, Sherif M.
year	2014
title	An Inquiry into Designing in Context using Generative Systems
source	International Journal of Architectural Computing vol. 12 - no. 4, 477-494
summary	The use of generative systems has been widely investigated in the architectural design process through different procedures and levels of autonomy to generate form.The digression from abstract pre- existing notions of vocabulary and rules – even when resulting in emergent forms – to address complex real- world contexts is yet a challenging undertaking.This paper explores incorporating context in the process of designing using generative systems from ideation to fabrication, and explores the relationship between the emergent nature of generative design and the situated act of designing while using generative design tools.A course offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was designed for this purpose. 110 students employed systems including shape grammars, L- systems, fractals and cellular automata, to design and fabricate 8 group projects.A discussion around emergence and situatedness is presented, with special attention to the designing process from ideation to fabrication.
series	journal
last changed	2019/05/24 09:55

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ascaad2014_037
id	ascaad2014_037
authors	Al-Tuhafi, Assda A. and Nasma M. Thabit
year	2014
title	The Methodology of Teaching Computer-Aided Architectural Design in the Department of Architecture in Mosul University
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 271; 457-469
summary	Several architectural studies tackled the methodologies of teaching the architectural design subject in general and their relation to the use of computer in particular. The trends varied in accordance with the research that is relevant to the subject due to its importance in generating new architectural models, but it didn’t crystallize a theoretical framework that identifies clear and specific vocabularies related to the methodology of teaching the computer-aided architectural design. The current study discusses the importance of this concept in an attempt to explore the particular problem represented by the non-clarity of this methodology in the department of architecture in Mosul University. Therefore, the problem of the research crystallized and its objective and its methodology were identified and this was represented by constructing a theoretical framework which includes several main items. Then the theoretical framework was applied to selected projects of architectural department students in order to manifest the particularity of teaching the computer-aided architectural design. Results showed the distinction of this department as this methodology led to the derivation of different architectural products in accordance with the particular effects using the computer technologies. The results also manifested the change in the architectural design trend that was caused due to the digital intervention in the way of the student's thinking from one hand and the components and the elements of the building from the other hand that the quality of the design can be improved by using the computer and the quantity will be more in shorter time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2021_291
id	caadria2021_291
authors	Bansal, Medha and Erdine, Elif
year	2021
title	Bio-Mineralisation And In-Situ Fabrication Of In-Dune Spaces: Case Study Of Thar Desert
doi	https://doi.org/10.52842/conf.caadria.2021.1.493
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 493-502
summary	Desertification has made large productive landscapes in the South-west Thar desert redundant, subjected people to migration and induced a constant influx of sand into the region (Singhvi and Amal, 2014). The abundance of sand creates an opportunity to adopt an existing technique, Bio-mineralisation, to develop a sand based composite material which, when treated with a construction binder like sodium alginate, can be used for engineering purposes. The paper sets a theoretical framework to develop a fabrication mechanism with microbial-grout injections and propose the development of in-dune/underground assembly of habitable spaces. Each of the sub-components of material system, fabrication mechanism and In-dune structures are detailed, and evaluated to devise a hierarchy between them. Their interdependencies together inform design strategies, a phasing plan and global time scale for overall terrain transformation.
keywords	Bio-mineralisation; Bio-grouting; In-dune fabrication; Tool path algorithms; Micro-climate analysis
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_338
id	sigradi2014_338
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva, Luisa Rodrigues Félix Dalla Vecchia
year	2014
title	A parametrização como experiência prévia para a estruturação de métodos projetuais em arquitetura [Parametrization as previous experience for structuring design methods in Architecture]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 297-301
summary	This study describes a didactic method for the introduction of parametric design in graphic and digital geometry courses in architectural training. It started with the recognition of the concept of parametric design and the investment in the appropriation of Grasshopper associated with Rhinoceros. Paper folding exercises were configured both physically and in the digital space. Through an interactive dynamic between traditional processes, by hand and digital, and parametric design, a learning path was defined in a playful manner which highlights the differences between methods of representation and its implications for the design action starting from a first semester of training.
keywords	Parametric Design; Teaching/learning; Graphic and Digital Geometry; Architecture; Paper Folding
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia14_661
id	acadia14_661
authors	Corazza, Marco; Doshi, Viral; Korner, Axel; Tabassun, Mehnaj
year	2014
title	Fiber Composite Fabrication: Experimental Methods of Architectural Applications
doi	https://doi.org/10.52842/conf.acadia.2014.661
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 661-670
summary	Due to availability and the production costs of current fabrication methods, fiber reinforced composites are used primarily in specialized fields with limited applications in architecture. The aim of the research is to present an exploration in low-tech fabrication techniques in conjunction with geometrical optimization of a large-scale typology within extreme environmental conditions.
keywords	fiber composites, digital fabrication, material computation, computational fluid dynamics, shell structures, structural optimization
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
doi	https://doi.org/10.52842/conf.acadia.2021.444
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	caadria2021_089
id	caadria2021_089
authors	Cristie, Verina, Ibrahim, Nazim and Joyce, Sam Conrad
year	2021
title	Capturing and Evaluating Parametric Design Exploration in a Collaborative Environment - A study case of versioning for parametric design
doi	https://doi.org/10.52842/conf.caadria.2021.2.131
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 131-140
summary	Although parametric modelling and digital design tools have become ubiquitous in digital design, there is a limited understanding of how designers apply them in their design processes (Yu et al., 2014). This paper looks at the use of GHShot versioning tool developed by the authors (Cristie & Joyce, 2018; 2019) used to capture and track changes and progression of parametric models to understand early-stage design exploration and collaboration empirically. We introduce both development history graph-based metrics (macro-process) and parametric model and geometry change metric (micro-process) as frameworks to explore and understand the captured progression data. These metrics, applied to data collected from three cohorts of classroom collaborative design exercises, exhibited students' distinct modification patterns such as major and complex creation processes or minor parameter explorations. Finally, with the metrics' applicability as an objective language to describe the (collaborative) design process, we recommend using versioning for more data-driven insight into parametric design exploration processes.
keywords	Design exploration; parametric design; history recording; version control; collaborative design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2014_080
id	sigradi2014_080
authors	De Martino, Jarryer Andrade; Gabriela Celani
year	2014
title	Sistema Generativo Evolutivo como Método no Processo Criativo [Evolutionary Generative System as a Method on Creative Process]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 380-383
summary	This paper presents the evolutionary algorithms associated with a generative system as a design method for creating a roof. The flexibility of the system allowed the generation of five experiments with different formal arrangements, contributing to the development of the creative process by obtaining unexpected results and more efficient. The paper presents a brief conceptual description of the evolutionary generative system, the description of the method used and the analysis of results.
keywords	Evolutionary algorithms; Parameterization; Creative process; Optimization; Diversity
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2014_043
id	sigradi2014_043
authors	Galvez Nieto, Alexander Junior´s
year	2014
title	El método de proyecto análogo-digital para el mejoramiento del aprendizaje de la representación arquitectónica dimensional [The method of analog-digital project to improve learning of three-dimensional architectural rendering]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 191-194
summary	The ideation process is to move an idea, a mental dimension to the actual physical dimension; that captures the initial intentions and allows their development. Awareness of this stage suggests and use techniques and strategies that favor the process. With the development of technology in the means of architectural expression, has moved any analog or traditional activity, as in the case of the model where its inclusion and experimentation, helps create a hybrid architecture. The confrontation to new methodologies, as part of a creative education, helps significantly to brain plasticity.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2014_002
id	caadria2014_002
authors	Haeusler, M. Hank; Danny Nguyen and Margaret Goldsack
year	2014
title	Ruled Surface Media Facades
doi	https://doi.org/10.52842/conf.caadria.2014.689
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 689–698
summary	Traditionally media facades have been created using 2D surfaces, not dissimilar to televisions. As computational architecture continues to explore non-Euclidian shapes it is a logical process to investigate the use and possibilities of emerging complex curved surfaces for the display of media content to match architectural design aspirations with demands of ubiquitous city concepts of penetrating surfaces with information. Drawing on existing architectural knowledge of ruled surfaces the paper outlines the implementation of adopting existing principles from architecture and mathematics to contemporary discussions in media architecture. It demonstrates that ruled surfaces can function as media facades by simulating ten different ruled surface types in Grasshopper and overlaying them with different video content. Based on the results the team proceeded to build a 1:1 prototype of a hyperbolic paraboloid to test if the simulated results in the computer matched with the physical model. The prototype was further tested using media content to observe the visibility of the display from various viewing positions. Based on the findings the paper concludes that ruled surface media facades are feasible. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	Media facades; responsive architecture; ruled surfaces; non-Euclidian spaces
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2014_136
id	caadria2014_136
authors	Ham, Jeremy J. and Marc Aurel Schnabel
year	2014
title	Comparisons in Representational Media Use in Design Studios between Hong Kong and Australia
doi	https://doi.org/10.52842/conf.caadria.2014.781
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 781–790
summary	Representational media – analogue, physical, digital, or virtual – are employed by students in the conception, development and presentation. In 2013 a survey at two architectural schools was conducted to study the current representational media use in design studios. The survey examined the role digital and physical media play in students’ design work and how students use the various media to generate and communicate their designs. This study presents its importance through the shift in architectural education whereby digital tools are not taught per se any longer, however expected to be mastered throughout the course. Yet students’ learning experiences are strongly dependant on the successful acquisition of skills and its transfer to deep learning. Especially architectural design studios build upon the premises that rerepresentation leads to a better acquisition of knowledge. Architectural educators may use the study to revisit their studio and reposition the role of media as well as align learning outcomes, deliverables and communication tools with the actual working- and learning-styles of students.
keywords	Representational media; design studio; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_020
id	ecaade2014_020
authors	Hans J.C. Hubers, Michela Turrin, Irem Erbas and Ioannis Chatzikonstantinou
year	2014
title	pCOLAD: online sharing of parameters for collaborative architectural design
doi	https://doi.org/10.52842/conf.ecaade.2014.2.039
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 39-48
summary	Simultaneous interdisciplinary architectural design from the very start of a project faces challenges in properly sharing information across disciplines. This research developed a method and related digital tool to improve collaborative design and aimed at making selected information to be shared faster and more transparently. The method consists of developing alternative parametric solutions for different parts of the design in such a way that crucial parameters form a link between these parts. The digital tool has been developed for Grasshopper and permits synchronic (real-time over the Internet) and a-synchronic sharing of these parameters. The design alternatives are evaluated with specific criteria, pros and cons in an Internet Forum and discussed via a video-conferencing tool. Decisions are then taken in a collaborative manner through voting. The paper describes the method based on a case study.
wos	WOS:000361385100003
keywords	Parametric; collaborative; design; plug-in; stadium
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2014_197
id	ecaade2014_197
authors	Helga Tauscher and Raimar J. Scherer
year	2014
title	Use cases for configurable building information model visualization
doi	https://doi.org/10.52842/conf.ecaade.2014.2.485
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 485-494
summary	We present a new approach to reconnect building information models and their visual representations involving architects and engineers as domain experts in the process of the visualization specification. To this end a generic visualization framework and a visualization description language are introduced. Four use case areas for the application of the approach were identified and are illustrated with corresponding examples.
wos	WOS:000361385100051
keywords	Bim; visualization; dsl
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2014_118
id	caadria2014_118
authors	Herr, Christiane M. and Thomas Fischer
year	2014
title	A Notation to Aid Column and Beam Layout Design for Reinforced Concrete Construction in China
doi	https://doi.org/10.52842/conf.caadria.2014.399
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 399–408
summary	In this paper we report on the ongoing development of a toolkit to support the design of column and beam layouts for reinforced concrete structures in China. We present a visual, human- and machine-readable notation for architects and structural engineers to rapidly model column and beam layouts, as well as our underlying considerations. In conjunction with the toolkit, which consists of a CAD package, an editor, a parser, and an interpreter, the notation addresses aspects of local construction practice and supports design considerations including appearance, structural viability, constructability, and cost.
keywords	Generative design; structural design; local materialisation; concrete; China; cost evaluation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2017_082
id	sigradi2017_082
authors	Itao Palos, Karine; Gisela Belluzzo de Campos
year	2017
title	A resiliência na tipografia digital: Interações propiciadas por programas generativos [Resilience in digital typography: Interactions provided by generative programs]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.568-574
summary	This article aims to describe the ephemeral qualities that typography acquires in the digital context, caused by the polyvalence of the algorithmic code, which, from generative programming, allows the user to interact with the typographic object. These reflection are realized through the study of four projects: “Lettree” (2004), “Pyrographie” (2005), “Falling in Love” (2016) and “He liked Thick Word Soup” (2014). The observations were made by drawing a comparison between the concept of “matter” in the computational scenario proposed by the design philosopher Vilém Flusser (2015) and the quality of “fluidity” observed in the images created by digital generative programs.
keywords	Typography; Interaction; Generative Systems; Design; Resilience.
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: