Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 657

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2014_046
id	ecaade2014_046
authors	Yazg_ Aksoy and Gülen Cagdas
year	2014
title	A Model for Sustainable Site Layout Design with Pareto Genetic Algorithm: SSPM
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 227-238
doi	https://doi.org/10.52842/conf.ecaade.2014.1.227
wos	WOS:000361384700022
summary	In architectural design, computer aided design tools have an important impact on design process, but still early design stage and sustainable design are problematic issues. During sustainable architectural design process, the designer needs to comply with some regulations, which requires calculations and comparisons. Green building certification systems are developed to assist designers during this complicated process, but for an efficient sustainable design for different regions, environmental information and local building codes must be considered with green building certification system criteria. In this paper, LEED and BREEAM certification systems are going to be considered as being the most representative building environment assessment schemes that are in use. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local building codes and environmental conditions; an efficient decision support system can be developed by using multi-objective genetic algorithm. This paper presents an effective site-use multi-objective optimization model that use pareto genetic algorithm to determine the most efficient sustainable site layout design for social housing, which could assist designers in the early stage of design process.
keywords	Sustainable site layout design; multi objective genetic algorithm; leed-breeam
series	eCAADe
email
last changed	2022/06/07 07:57

_id	cdrf2023_273
id	cdrf2023_273
authors	Pixin Gong, Xiaoran Huang, Chenyu Huang, Shiliang Wang
year	2023
title	Modeling on Outdoor Thermal Comfort in Traditional Residential Neighborhoods in Beijing Based on GAN
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_23
summary	With the support of new urban science and technology, the bottom-up and human-centered space quality research has become the key to delicacy urban governance, of which the Universal Thermal Climate Index (UTCI) have a severe influence. However, in the studies of actual UTCI, datasets are mostly obtained from on-site measurement data or simulation data, which is costly and ineffective. So, how to efficiently and rapidly conduct a large-scale and fine-grained outdoor environmental comfort evaluation based on the outdoor environment is the problem to be solved in this study. Compared to the conventional qualitative analysis methods, the rapidly developing algorithm-supported data acquisition and machine learning modelling are more efficient and accurate. Goodfellow proposed Generative Adversarial Nets (GANs) in 2014, which can successfully be applied to image generation with insufficient training data. In this paper, we propose an approach based on a generative adversarial network (GAN) to predict UTCI in traditional blocks. 36000 data samples were obtained from the simulations, to train a pix2pix model based on the TensorFlow framework. After more than 300 thousand iterations, the model gradually converges, where the loss of the function gradually decreases with the increase of the number of iterations. Overall, the model has been able to understand the overall semantic information behind the UTCI graphs to a high degree. Study in this paper deeply integrates the method of data augmentation based on GAN and machine learning modeling, which can be integrated into the workflow of detailed urban design and sustainable construction in the future.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2014_139
id	caadria2014_139
authors	Tong, Ziyu
year	2014
title	Comparison of Partitioning Methods for Estimating the Layout of Green Spaces
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 873–882
doi	https://doi.org/10.52842/conf.caadria.2014.873
summary	The urban green space positively affects the quality of the environment and urban life. To estimate the layout of urban green spaces, especially to describe the real difference of regional properties, the influenced zone of each green space should be identified firstly. The influenced zone can be used to quantitatively analyse the difference of regional environmental quality. The identification of the influenced zones of green spaces actually is a problem of space partitioning. The study compared three methods mostly used in space partitioning. The regular grid is a most common partitioning method. It is easy to use, but cannot link the grid with green space separately. Voronoi algorithm is a constructive method which partitions the urban space based on each green. Another approach is the application of gravity models, which assumed analogies between human behaviour and Newtonian gravity laws. The gravity model could calculate the probabilities of residents to choose the green space and partition the urban space. In the comparison of these three methods, we conclude that the gravity model can take more characteristics of the green space as the calculating parameters. The gravity model is a better method to estimate the layout of urban green spaces.
keywords	Space partitioning; gravity model; Voronoi algorithm; regular grids; green space
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2014_055
id	ecaade2014_055
authors	Ahmet Emre Dincer, Gülen Cagdas and Hakan Tong
year	2014
title	A Digital Tool for Customized Mass Housing Design
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 201-211
doi	https://doi.org/10.52842/conf.ecaade.2014.1.201
wos	WOS:000361384700020
summary	Innovative design approaches are needed for mass housing implementations. Especially increasing interaction between user and designer is major important in the design decisions of these buildings. For this, it is seriously necessary to benefit from technological advances in computational designs, because digital tools like shape grammar, cellular automata, genetic algorithm, l-systems and agent-based models in this field provide not only to save time and to manage the relationships but also to generate many different alternatives. Accordingly, a digital support tool for designers has been developed by using cellular automata approach and scripts of 3Ds Max software. It produces samples of housing design plans which is generated by cellular automata approach according to the data of users' preferences. In this paper the interface and contributions of the developed model are introduced and discussed.
keywords	Computational design; mass customization; innovative housing design; plugin
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_007
id	ascaad2014_007
authors	Al-Rawi, Osama
year	2014
title	Evolutionary Algorithms in Islamic Architecture
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 99-107
summary	The cosmological nature of Islamic architecture makes it a useful case study for the capability of the adaptation, assimilation and accommodation with the development of evolutionary algorithms and their applications in architectural design. Genetic algorithm derives its structure from the observation of nature. We shall review the concept of intelligent agents and their organization into complex adaptive systems as well as genetic-type algorithms for learning and evolution. Since algorithmic art consists of generation of images on the basis of algorithms, algorithms can be viewed as a notation, and notation is something that music has but visual artefacts in general miss. This paper aims to discover the role of evolutionary algorithms in historical Islamic architecture. Also, we shall try to investigate the way in which the future development could occur not only through the discovery of new facts or theories, but also through the rise and dissemination of new visions having different explanation of Islamic architecture that considers it as a result of serious application of formation through evolutionary genetic algorithms.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_187
id	ecaade2014_187
authors	Asli Cekmis
year	2014
title	Fuzzy computing for layout design in ill-defined, uncertain spaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 277-286
doi	https://doi.org/10.52842/conf.ecaade.2014.1.277
wos	WOS:000361384700027
summary	Layout design has been supported by some computational tools, where fuzzy systems have been approved as an appropriate method to handle uncertainty in the early design stage. In this paper, a new mathematical model depending on the fuzzy logic and sets theory is proposed to assist in layout design. The model distinctly deals with spatial uncertainty in open planned designs, where there is no clear layout configuration or definite patterns of usage. The model calculates the possibility of occupancy according to space, function and user related parameters and logical rules. It also visualises the architectural plan as being comprised of sub-spaces formed by the distribution of those possibilities. Sub-spaces are characterised as “Fuzzy Architectural Spatial Objects” (FASOs). As a result, layouts are represented as an accumulation of FASOs showing a certain inhabitation pattern. Various layouts can be generated within the identity of FASOs. Architects can evaluate the layouts and propose new ones by organising the FASOs on the plan and considering their relations. After describing the model the paper demonstrates an application which aims to design a proper layout for a major exhibition hall in Istanbul.
keywords	Spatial uncertainty; open-plans; inhabitation patterns; layout design; fuzzy architectural spatial objects (fasos)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_047
id	caadria2014_047
authors	Dickinson, Susannah and Sheehan Wachter
year	2014
title	Nature as a Comprehensive Model: A Biomimetic Installation
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 627–636
doi	https://doi.org/10.52842/conf.caadria.2014.627
summary	The following group installation was part of a seminar on biomimetics at the University of Arizona, USA. The design began with research into various natural systems, namely cell growth and morphogenesis and digital tools. In nature cells contain preprogrammed responses based on intrinsic properties which allow for differentiation and adaptation to external forces. This logic of cell morphology was developed into the installation design. Form specificity and topological variation was developed through the manipulation of a material system, bending and loading identical components to adapt to external forces, such as the sun, while simultaneously navigating the site, providing structure and ultimately architectural space.
keywords	Biomimetics; pedagogy; simulation; design/build
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2014_118
id	caadria2014_118
authors	Herr, Christiane M. and Thomas Fischer
year	2014
title	A Notation to Aid Column and Beam Layout Design for Reinforced Concrete Construction in China
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 399–408
doi	https://doi.org/10.52842/conf.caadria.2014.399
summary	In this paper we report on the ongoing development of a toolkit to support the design of column and beam layouts for reinforced concrete structures in China. We present a visual, human- and machine-readable notation for architects and structural engineers to rapidly model column and beam layouts, as well as our underlying considerations. In conjunction with the toolkit, which consists of a CAD package, an editor, a parser, and an interpreter, the notation addresses aspects of local construction practice and supports design considerations including appearance, structural viability, constructability, and cost.
keywords	Generative design; structural design; local materialisation; concrete; China; cost evaluation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2014_224
id	ecaade2014_224
authors	Mohammad Rahmani Asl, Michael Bergin, Adam Menter and Wei Yan
year	2014
title	BIM-based Parametric Building Energy Performance Multi-Objective Optimization
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-464
doi	https://doi.org/10.52842/conf.ecaade.2014.2.455
wos	WOS:000361385100048
summary	Building energy performance assessments are complex multi-criteria problems. Appropriate tools that can help designers explore design alternatives and assess the energy performance for choosing the most appropriate alternative are in high demand. In this paper, we present a newly developed integrated parametric Building Information Modeling (BIM)-based system to interact with cloud-based whole building energy performance simulation and daylighting tools to optimize building energy performance using a Multi-Objective Optimization (MOO) algorithm. This system enables designers to explore design alternatives using a visual programming interface, while assessing the energy performance of the design models to search for the most appropriate design. A case study of minimizing the energy use while maximizing the appropriate daylighting level of a residential building is provided to showcase the utility of the system and its workflow.
keywords	Building energy performance analysis; building information model (bim); parametric modelling; parametric energy simulation; multi-objective optimization
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2014_088
id	caadria2014_088
authors	Puusepp, Renee
year	2014
title	Spatial Agglomerates
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 585–594
doi	https://doi.org/10.52842/conf.caadria.2014.585
summary	This paper reports on the computational modelling research investigating spatial organisations often associated with unplanned settlements. Such spatial agglomerates are composed of several co-located but autonomous units (agents) that share common facilities and infrastructure (e.g. circulation). Depending on the context, units in the agglomerate represent individual dwellings, apartments or abstract spatial geometry. The paper presents early prototype models that can be interpreted at various scale, and a computational model for generating organic settlement layouts. The originality of the research resides within a new multi-agent algorithm for creating spatial organisations. The agglomeration process benefits from two distinct generative design strategies – self-organisation and adaptive development strategy. While the self-organisation accounts for the emergence of the global structure in the agglomeration, the adaptive development strategy ensures that the basic environmental and spatial requirements of each individual unit are satisfied.
keywords	Generative design; agent based modelling; object oriented design; unplanned settlements
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ascaad2014_009
id	ascaad2014_009
authors	Rahmann, Heike and Jillian Walliss
year	2014
title	Interdisciplinary Intersections: New roles for digital technologies and landscape architecture in the design of large scale infrastructures
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 123-135
summary	The introduction of BIM is assumed to introduce higher degrees of collaboration and efficiencies within design and construction practices. The potentials of this collaboration tend to focus on architecture, engineering and construction (AEC). Landscape architecture is rarely discussed within this model, technically nor conceptual. This paper explores the potentials of landscape architecture’s contribution to this new model of digitally driven collaboration. Drawing on interviews with the architects, landscape architects and engineers we explore the role of landscape architecture in the conceptualization, design and construction of the Victorian Desalination Plant, a highly political project located on an ecological sensitive coastal site. This paper highlights the centrality of the landscape digital model in mediating the critical intersection between the design parameters, physical attributes of the site, performative qualities of the design and the disciplines of architecture, landscape and engineering. This model also formed the dominant method for communicating the complex project to stake holders and clients. Significantly, this model was not developed into a BIM model, with content instead integrated into the architectural and engineering models. This research highlights one of the major difficulties in conceptualizing the positioning of landscape architecture within a BIM driven collaborative process. To operate effectively, landscape architecture must engage across the multiple scales and disciplinary intersections. Consequently, landscape architects must understand the digital and spatial languages of architecture and engineering, and conceptualise where their contribution lies within ‘paperless’ design and construction processes. This outcome differs significantly from current debates within landscape architecture which instead focus on the identification of ‘the’ specialist BIM software most appropriate to the discipline, as distinct from understanding BIM as a collaborative process.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_655
id	acadia14_655
authors	Su, Zhouzhou; Yan, Wei
year	2014
title	Improving Genetic Algorithm for Design Optimization Using Architectural Domain Knowledge
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp.655-660
doi	https://doi.org/10.52842/conf.acadia.2014.655
summary	The paper presents an improved genetic algorithm (GA) for architectural design optimization problems with offline simulation method utilizing specific domain knowledge in architecture. The method is evaluated by a case study of a nursing unit design, for which the objectives are to minimize nurses’ travel distance and maximize daylighting performance in patient rooms.
keywords	design optimization, building simulation, genetic algorithm, offline simulation, computational complexity, walking distance
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	sigradi2014_293
id	sigradi2014_293
authors	Vannini, Virgínia Czarnobay; Alessandro Lima, Jarryer Andrade De Martino, Underléa Miotto Bruscato
year	2014
title	Desenho Paramétrico e Performance Associados ao Processo Projetual [Parametric Design and Performance associated with Design Process]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 134-137
summary	This work describes a design methodology to minimize direct solar incidence in facades, exploring the shape of brise-soleil. The methodology correlates parametric design and evolutionary algorithm, through the integration of computational tools. At first, are established shade’s shape variable and restrictions, through the Rhinoceros software and Grasshopper plug-in. Subsequently, the shape is studied to minimize the sunlight incidence through the genetic platform ‘Galapagos’ and the simulation software ‘Ecotect’. The results indicate the relevance between the parametric design and the evolutionary algorithms during the project process, reducing the time in researching for optimized solutions.
keywords	Design process; Evolutionary algorithm; Parametric design; Brise-soleil
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2014_105
id	ecaade2014_105
authors	Zaid Alwan, Peter Holgate and Paul Jones
year	2014
title	Applying BIM to Sustainable Performance Evaluation in Design Projects: An Educational Approach for Architecture Programmes
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 437-444
doi	https://doi.org/10.52842/conf.ecaade.2014.2.437
wos	WOS:000361385100046
summary	The merits and potential of Building Information Modelling (BIM) have been promoted for several years; however, its widespread adoption and development may potentially stagnate on account of a technical skills shortage, with insufficient personnel having the capabilities to successfully deliver projects. This shortfall covers all aspects of BIM, and building performance and life cycle analysis in particular. Programmes such as Ecotect, Revit, Green Building Studio, and Project Vasari, have transformed data capture and analysis, enabling architects and systems engineers to visualise site analyses and to test preliminary designs. As BIM is a relatively new process which continues to develop rapidly, Higher Education Institutions need to respond to currency and change while striving to provide graduates with the advanced skills to satisfy the needs of the building industry. This work presents a case study of the application of Autodesk's Building Performance Analysis Certificate (BPAC) as a driver for learning in support of the integration of BIM into the architectural curriculum.
keywords	Virtual building performance i; bim collaboration; data transfer; sustainability education
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_035
id	ascaad2014_035
authors	Al-Kazzaz, Dhuha A. and Assda A. Al-Tuhafi
year	2014
title	Using Genetic Algorithms for the Generation of New Designs Derived from Islamic Schools Plans
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 119; 431-442
summary	Historic buildings are fruitful sources of architectural concepts which can be used to generate new designs characterized by authenticity and originality. Design computing methods have used varied techniques of knowledge representation in deriving new designs from architectural precedents such as: case-based design and genetic algorithms. This research has adopted genetic algorithms, a simulation of biological evolution to generate new plans from old ones belonging to the Islamic historical schools. The implemented method represents architectural knowledge in a simple schema (chromosome) and allows it to be modified easily using crossover operation to generate new plans with high fitness value. The research considered the fitness function as a measure of differences among the design characteristics of the sample of the Islamic schools. The results show the effectiveness of genetic algorithms in both analyzing past precedents and synthesizing their characteristics to produce new designs.
series	ASCAAD
last changed	2016/02/15 13:09

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_279
id	caadria2014_279
authors	Austern, Guy; Soungmin Yu, Mara Moral and Theerapat Jirathiyut
year	2014
title	The Urban Genome
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 263–272
doi	https://doi.org/10.52842/conf.caadria.2014.263
summary	The influence of urban morphology on the energy consumption of a fabric has been recently established by research into the energy use of existing cities. This paper suggests a framework for generating environmentally adapted urban tissue by using genetic algorithms as form-finding processes. A series of multi-objective optimization algorithms are described. The geometric abstractions used as a basis for these algorithms are illustrated in detail, and the results and implications of these types of simulations are discussed. The methodology developed within this paper was tested on one km2 site in three cities of varying climates, and further expanded into a detailed case study within one city.
keywords	Urban simulation; Environmental design; Optimization; Genetic Algorithms; Urban Morphology
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: