Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 651

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_013
id	ascaad2014_013
authors	Binhomaid, Omar and Tarek Hegazy
year	2014
title	Comparison between Genetic Optimization and Heuristic Methods for Prioritizing Infrastructure Rehabilitation Programs
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 175-182
summary	In recent years, infrastructure rehabilitation has been in the focus of attention in North America and around the world. A large percentage of existing infrastructure assets is deteriorating due to harsh environmental conditions, insufficient capacity, and age. Due to stringent budget limits, however, asset management systems become important to assess the life cycle performance of various assets, and accordingly prioritize the assets for rehabilitation purposes. While many asset management systems have been introduced in the literature, almost no studies have compared the effectiveness of their asset prioritization methods. This paper presents an extensive comparison between heuristic and optimization methods for prioritizing large-scale rehabilitation programs, under budget constraints. The paper first introduces different life cycle cost analysis (LCCA) formulations for three case studies obtained from the literature related to buildings, pavements, and bridges. Based on extensive experiments with the three case studies and on different network sizes, heuristic techniques proved its practicality for handling various network sizes. The performance of genetic optimization, on the other hand, was more efficient on small-scale networks but showed steep degradation in performance with large-scale problems. This research can be beneficial to municipalities and asset managers and can help them design efficient methods to sustain the safety and operability of the civil infrastructure, with least cost.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_030
id	sigradi2014_030
authors	Borges, Marina Ferreira; Ricardo Hallal Fakury
year	2014
title	Processo iterativo de design paramétrico e projeto estrutural aplicado ao desenvolvimento de torre eólica [Iterative process of parametric design and structural project applied to the development of lattice and wind power]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 35-38
summary	This article proposes to study the process of parametric design integrated analysis and structural design. This application model is called Performative Model; the form is generated based on performance criteria. The digital tools facilitate the information flow between designers using parametric model and Finite Element Analysis. To research the method of Performative Model is proposed the development of a conceptual framework of lattice wind tower with the aim of a quantitative and qualitative structure optimization. Therefore, the parametric modeling will be done using Rhinoceros software, the plugin for creating algorithms Grasshoper and structural analysis plugin Scan & Solve.
keywords	Performative model; Parametric model; Finite Element Analysis; Lattice Wind Tower
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_104
id	ecaade2014_104
authors	Estefania Tapias and Shubham Soni
year	2014
title	Building-up urban open spaces from shadow range analyses
doi	https://doi.org/10.52842/conf.ecaade.2014.1.129
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 129-135
summary	This paper explores an alternative approach for the creation of new built forms based on solar access analysis. Consolidated on urban areas under development, the denominated 'inverted' approach is focused on the generation of recreational open spaces based on shadow conditions caused by existing built forms, and as a starting point for the construction of new urban envelopes as possible development areas. Unlike the existing method of the 'solar envelope', the 'inverted' approach shows an alternative procedure for the construction of built forms, based on pedestrian comfort caused by solar access in urban spaces rather than on indoor performance affected by the penetration of sunlight into buildings. As a method for the creation of urban envelopes, this approach attempts to enhance pedestrian comfort according to the study of solar access in urban areas. The 'inverted' approach is based on sun path data and is developed as a generative procedure, where the results of shadow range analyses and the different urban objectives work as input parameters for the generation of urban envelopes. Based on this methodology, two Grasshopper® custom components are developed.
wos	WOS:000361384700012
keywords	Urban open spaces; solar access; shadow range simulation; generative modelling
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2014_233
id	ecaade2014_233
authors	Evangelos Pantazis and David Gerber
year	2014
title	Material Swarm Articulations - New View Reciprocal Frame Canopy
doi	https://doi.org/10.52842/conf.ecaade.2014.1.463
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 463-473
summary	Material Swarm Articulations, is an experiment in developing a multi-objective optimization system that incorporates bottom up approaches for informing architectural design. The paper presents an initial built project that demonstrates the combination of a structural form finding method, with an agent based design system through the digital fabrication processes. The objective of this research is to develop a workflow combined with material and construction constraints that has the potential to increase performance objectives while enabling geometric complexity and design driven articulation of a traditional tectonic system. The emphasis of the research at this stage is to take advantage of material properties and assembly methods applied to a digital design and simulation workflow that enables emergent patterns to influence the performance of the space.The paper illustrates the research through a prototype of a self standing canopy structure in 1:1 scale. It presents results of the form finding, generative patterning, digital fabrication affordances and sets and agenda for next steps in the use of multi-agent systems for design purposes.
wos	WOS:000361384700046
keywords	Computational design; agent-based system; digital fabrication; parametric design; reciprocal frames; form finding; multi-objective optimization, multi-agent systems for design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2014_132
id	sigradi2014_132
authors	Hu, Yongheng; Qinying Li, Feng Yuang, Han Li
year	2014
title	The BIM based Responsive Environmental Performance Design Methodology
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 120-125
summary	The concept of “families” lies in the core of internal data structure in Building Information Modeling (BIM). The elements of this modeling platform are all associated with each other as parts of the “families”, independent of their geometrical structure, materiality, parametric dependencies or their physical connection to other elements. Through the associations introduced among the parameters of the ‘families’ members, this study aims at establishing a methodology for a multi-objective evaluation of the environmental performance of the building as an organism. The methodology is founded on a system of different values and weights attributed to the parameters of the families members which are adjusted and fine-tuned through a series of iterations, thus affecting the overall building performance towards an optimum goal. The performance evaluation method used in the “families” methodology is not limited to the individual assessment of the environmental performance objectives or to an integrated multi-objective weighting mechanism; as an overall evaluation platform it checks and balances the individual characteristics of the system not as static conclusive results but as dynamic criteria intended to guide the overall design and building process. The importance of this paper lies in the construction of a concrete methodological set of tools for the assessment of the environmental performance of the building. It will lead the way in independent research in the field of architectural design and the development of ecological thinking and building in China.
keywords	BIM ‘families’; Multi-Objective Generic Algorithm; Environmental Performance Simulation; Multi-Objective Environmental Performance Optimization
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2014_123
id	sigradi2014_123
authors	Hu, Yongheng; Qinying Li
year	2014
title	Study on an Architect-Oriented approach of Structural Performance-based Design
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 111-114
summary	For most architects, it is not easy to transform their free form of designs into constructable building without precise knowledge structural design and more often the architect need ask structural engineer for consultation. Yet the structural performance of building itself provides possibility for the architect to explore a new form-finding procedure and An approach is introduced in this article and it could be adopted by architects concerning the works of predicting the structural performance in the early design stage. The approach has been developed throughout the architecture history and recently it turns into a computational methodology for architectural design. This article analysis the structural performance design history in architect’s view, compares and explain the current Structural performance-based design methodology and evaluate its value for architecture design.
keywords	Performance-Based Design; Structural Optimization; Form-Finding; Computational Design; Tectonic Innovation
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2014_274
id	caadria2014_274
authors	Kaftan, Martin; Markus Manahl, Jiri Pavlicek, Elmar Hess and Urs Hirschberg
year	2014
title	Augmented Parametrics
doi	https://doi.org/10.52842/conf.caadria.2014.615
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 615–624
summary	Current parametric design software lacks the capacity to integrate simulation and optimisation when they would be most relevant: at the early stages of the design process. This paper presents a novel framework to address this issue: A parametric program that supports performance-based modelling by integrating detailed physical simulation modules that also take construction issues into account, while at the same time providing easy access to high-level optimisation approaches. Providing bidirectional parametric modelling capabilities, we refer to the system under development as augmented parametrics. It is being developed as part of a research project sponsored by the Austrian Science Foundation.
keywords	Parametric design; generative design; optimization; building performance simulation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2014_224
id	ecaade2014_224
authors	Mohammad Rahmani Asl, Michael Bergin, Adam Menter and Wei Yan
year	2014
title	BIM-based Parametric Building Energy Performance Multi-Objective Optimization
doi	https://doi.org/10.52842/conf.ecaade.2014.2.455
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-464
summary	Building energy performance assessments are complex multi-criteria problems. Appropriate tools that can help designers explore design alternatives and assess the energy performance for choosing the most appropriate alternative are in high demand. In this paper, we present a newly developed integrated parametric Building Information Modeling (BIM)-based system to interact with cloud-based whole building energy performance simulation and daylighting tools to optimize building energy performance using a Multi-Objective Optimization (MOO) algorithm. This system enables designers to explore design alternatives using a visual programming interface, while assessing the energy performance of the design models to search for the most appropriate design. A case study of minimizing the energy use while maximizing the appropriate daylighting level of a residential building is provided to showcase the utility of the system and its workflow.
wos	WOS:000361385100048
keywords	Building energy performance analysis; building information model (bim); parametric modelling; parametric energy simulation; multi-objective optimization
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2014_046
id	caadria2014_046
authors	Moya, Rafael; Simon Watkins, Yan Ding, Jane Burry and Mark Burry
year	2014
title	Aerodynamic Features as Auxiliary Architecture
doi	https://doi.org/10.52842/conf.caadria.2014.295
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 295–304
summary	This paper presents the experimental study of aerodynamics phenomena in built environments, focused on explorations of environmental wind flow near buildings, pedestrian wind comfort issues and methods of mitigation of wind speed. In addition, it is an overview of an aerodynamic analysis with CFD software for a hypothetical urban shelter design, based on aerodynamic features. The aim is to evaluate the feature’s performance to control wind flow in protection regions for pedestrians.
keywords	Urban aerodynamics; CFD simulation; wind discomfort
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cdrf2023_273
id	cdrf2023_273
authors	Pixin Gong, Xiaoran Huang, Chenyu Huang, Shiliang Wang
year	2023
title	Modeling on Outdoor Thermal Comfort in Traditional Residential Neighborhoods in Beijing Based on GAN
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_23
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	With the support of new urban science and technology, the bottom-up and human-centered space quality research has become the key to delicacy urban governance, of which the Universal Thermal Climate Index (UTCI) have a severe influence. However, in the studies of actual UTCI, datasets are mostly obtained from on-site measurement data or simulation data, which is costly and ineffective. So, how to efficiently and rapidly conduct a large-scale and fine-grained outdoor environmental comfort evaluation based on the outdoor environment is the problem to be solved in this study. Compared to the conventional qualitative analysis methods, the rapidly developing algorithm-supported data acquisition and machine learning modelling are more efficient and accurate. Goodfellow proposed Generative Adversarial Nets (GANs) in 2014, which can successfully be applied to image generation with insufficient training data. In this paper, we propose an approach based on a generative adversarial network (GAN) to predict UTCI in traditional blocks. 36000 data samples were obtained from the simulations, to train a pix2pix model based on the TensorFlow framework. After more than 300 thousand iterations, the model gradually converges, where the loss of the function gradually decreases with the increase of the number of iterations. Overall, the model has been able to understand the overall semantic information behind the UTCI graphs to a high degree. Study in this paper deeply integrates the method of data augmentation based on GAN and machine learning modeling, which can be integrated into the workflow of detailed urban design and sustainable construction in the future.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2014_080
id	ecaade2014_080
authors	Sevil Yazici
year	2014
title	Efficiency in Architectural Geometry Informed by Materials
doi	https://doi.org/10.52842/conf.ecaade.2014.1.547
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 547-554
summary	Although some studies investigate physics-based dynamic systems to generate structurally efficient forms by incorporating geometry with performance requirements, there is a gap in the field questioning on how to link structurally efficient architectural geometry with mechanical properties of materials. The aim of this paper is to question the possibility of generating an information loop in which Young's Modulus, stiffness of the material may both inform the form-finding process and the structural performance simulation. The proposed method offers steps including form-finding, series of analyses applied for architectural geometry and structural performance, as well as optimization. Based on the simulation results, efficiency values are calculated driven by the use of different materials. The significance of incorporating material properties in the early design stage is underlined, by comparing differences, whether the stiffness of material informs the form-finding process or not.
wos	WOS:000361384700054
keywords	Form-finding; material; architectural geometry; finite element method; optimization
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ijac201412204
id	ijac201412204
authors	Wilkinson, Samuel; Sean Hanna
year	2014
title	Approximating Computational Fluid Dynamics for Generative Tall Building Design
source	International Journal of Architectural Computing vol. 12 - no. 2, 155-178
summary	Background literature review, methodology, results, and analysis are presented for a novel approach to approximating wind pressure on tall buildings for the application of generative design exploration and optimisation.The predictions are approximations of time-averaged computational fluid dynamics (CFD) data with the aim of maintaining simulation accuracy but with improved speed.This is achieved through the use of a back-propagation artificial neural network (ANN) with vertex-based shape features as input and pressure as output.The training set consists of 600 procedurally generated tall building models, and the test set of 10 real building models; for all models in both sets, a feature vector is calculated for every vertex. Over the test set, mean absolute errors against the basis CFD are 1.99–4.44% (_:2.10–5.09%) with an on-line process time of 14.72–809.98s (0.028s/sample). Studies are also included on feature sensitivity, training set size, and comparison of CFD against prediction times. Results indicate that prediction time is only dependent on the number of test model vertices, and is therefore invariant to basis CFD time.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
wos	WOS:000372316000007
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	ecaade2014_086
id	ecaade2014_086
authors	Ahmed Sarhan and Peter Rutherford
year	2014
title	Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
doi	https://doi.org/10.52842/conf.ecaade.2014.1.323
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
summary	The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
wos	WOS:000361384700032
keywords	Environmental design; building performance simulation; architectural design education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_637
id	acadia14_637
authors	Boone, Elizabeth
year	2014
title	Vacuum Insulated Tubes
doi	https://doi.org/10.52842/conf.acadia.2014.637
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 637-646
summary	Multi disciplinary research on thermally broken vacuum insulated tubes as a high performance building enclosure.
keywords	Material Logics and Tectonics, Multidisciplinary Design Optimization, Computational design analysis, Practice-based and interdisciplinary computational design research, Works in Progress, Computational design research and education
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

For more results click below: