Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 594

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	caadria2014_136
id	caadria2014_136
authors	Ham, Jeremy J. and Marc Aurel Schnabel
year	2014
title	Comparisons in Representational Media Use in Design Studios between Hong Kong and Australia
doi	https://doi.org/10.52842/conf.caadria.2014.781
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 781–790
summary	Representational media – analogue, physical, digital, or virtual – are employed by students in the conception, development and presentation. In 2013 a survey at two architectural schools was conducted to study the current representational media use in design studios. The survey examined the role digital and physical media play in students’ design work and how students use the various media to generate and communicate their designs. This study presents its importance through the shift in architectural education whereby digital tools are not taught per se any longer, however expected to be mastered throughout the course. Yet students’ learning experiences are strongly dependant on the successful acquisition of skills and its transfer to deep learning. Especially architectural design studios build upon the premises that rerepresentation leads to a better acquisition of knowledge. Architectural educators may use the study to revisit their studio and reposition the role of media as well as align learning outcomes, deliverables and communication tools with the actual working- and learning-styles of students.
keywords	Representational media; design studio; pedagogy
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_128
id	ecaade2014_128
authors	Ivana Vinšová, Dana Mat_jovská and Henri Achten
year	2014
title	The Unbearable Lightness of BIM
doi	https://doi.org/10.52842/conf.ecaade.2014.2.411
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 411-415
summary	In this paper we investigate the current state of BIM usage in Czech Republic and aim to find strategies how to improve BIM education based on findings from practice. We give an outline of the current state, identify problems that provide hurdles for BIM adoption, and show how we implement a new pedagogical approach to BIM education in our faculty.
wos	WOS:000361385100043
keywords	Bim; academic bim; practising bim
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaaderis2023_45
id	ecaaderis2023_45
authors	Morton, David, Ahmed, Tarek MF and Humphery, Richard
year	2023
title	BIM and Teaching in Architecture: Current thinking and approaches
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 105–115
summary	Increasing use of BIM has represented a continuing shift in traditional assumptions on how we navigate the design process. BIM is affording the student the ability to gain a greater understanding of their design ideas via the exploration of scale, spatial organisation and structure, amongst many other design layers, in increasing levels of detail, at the same point in the design process. Architectural education is at a delayed tipping point where architectural students are increasingly looking towards BIM to streamline their design process drawn by the production of realistic visualisation, but with a lack of knowledge and skill in its application. With a lack of guidance and understanding around the application of BIM, the use of BIM in this manner overlooks the potential of BIM to construct and test virtual simulations of proposed schemes, to support design enquiry. A historical concern for the pedagogy constructed around the students’ design process is the application of methods and techniques that support the progression through the design process, (Ambrose, 2014; dash mei & Safari, 2018). This study examines the design process of architectural students and the interaction between analogue and digital methods used in design. These primary modes of communication, offer the opportunity to query the roles and rules of traditional architectural conventions around ‘problem finding’ and ‘problem solving’, challenging the ‘traditional’ design process examined by pioneers like Bruner (1966) and Schon (1987). These approaches are distilled from the findings of the study and presented as guidance to those teaching in architectural aBIMemia to align pedagogic goals to methods of abstraction in this new era of design education reconsidering digital methods in design.
keywords	BIM, BIM, Design Process, Architecture, Learning
series	eCAADe
email
last changed	2024/02/05 14:28

_id	caadria2016_809
id	caadria2016_809
authors	Nakapan, Walaiporn
year	2016
title	Using the SAMR Model to transform mobile learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2016.809
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 809-818
summary	This paper presents the progress of a pilot classroom, which uses mobile devices to enhance instructor-student classroom interac- tions and students’ learning of the History of Art and Architecture. The main objective of this research was to find a way of improving classroom activities, for the coming year, by making the best possible use of technology to enable students to learn more successfully and improve their understanding of the lesson content. In this paper, class- room activities during 2014 and 2015 are analysed using the SAMR Model coupled with Bloom’s revised taxonomy and the EdTech Quin- tet Model. In addition, a plan for the redesign and improvement of ac- tivities in 2016 is proposed, the effectiveness of the SAMR model at improving in class activities is discussed and a perspective on how to develop the classroom using the “SAMR ladder” is included. The re- sults show that in 2015, 25% of the students in the class achieved an A grade, and less than 5% were graded F compared to 26% in 2012.
keywords	Design education; mobile-based learning; History of Art and Architecture; SAMR model
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2014.761
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2014_031
id	caadria2014_031
authors	Phare, Darin; Ning Gu and Anthony Williams
year	2014
title	A Semiotic Analysis of Representational Imagery Used in a Collective Design Task
doi	https://doi.org/10.52842/conf.caadria.2014.431
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 431–440
summary	Collective Design seeks to explore how new forms of Collective Intelligence, arising from the web, allows mass participation in design. Regarding design we have a wellestablished grounding for understanding how design works through the use of representations. Likewise, collective intelligence via certain crowdsourcing examples has demonstrated that a diverse crowd can trump ability groups, when the conditions are right. In the literature, crowdsourcing is the leading lens bridging design with collective intelligence. However in crowdsourcing design there is less focus on the role of shared representations, subsequently any collective diversity is mitigated by the models that govern the extraction of this intelligence. We propose that more effective design in collective intelligence lies in the crowd’s ability to generate meaningful contributions via the content of shared representations. In order to investigate this, the current paper examines data collected from a pilot study in which a representationally rich online collaborative presentation tool is used to provide a shared design space. The analysis presented applies our previously established semiotic framework to identify potential patterns in the meaningful communication of image based design information.
keywords	Collective Design; representation; semiotics
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	cdrf2023_273
id	cdrf2023_273
authors	Pixin Gong, Xiaoran Huang, Chenyu Huang, Shiliang Wang
year	2023
title	Modeling on Outdoor Thermal Comfort in Traditional Residential Neighborhoods in Beijing Based on GAN
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_23
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	With the support of new urban science and technology, the bottom-up and human-centered space quality research has become the key to delicacy urban governance, of which the Universal Thermal Climate Index (UTCI) have a severe influence. However, in the studies of actual UTCI, datasets are mostly obtained from on-site measurement data or simulation data, which is costly and ineffective. So, how to efficiently and rapidly conduct a large-scale and fine-grained outdoor environmental comfort evaluation based on the outdoor environment is the problem to be solved in this study. Compared to the conventional qualitative analysis methods, the rapidly developing algorithm-supported data acquisition and machine learning modelling are more efficient and accurate. Goodfellow proposed Generative Adversarial Nets (GANs) in 2014, which can successfully be applied to image generation with insufficient training data. In this paper, we propose an approach based on a generative adversarial network (GAN) to predict UTCI in traditional blocks. 36000 data samples were obtained from the simulations, to train a pix2pix model based on the TensorFlow framework. After more than 300 thousand iterations, the model gradually converges, where the loss of the function gradually decreases with the increase of the number of iterations. Overall, the model has been able to understand the overall semantic information behind the UTCI graphs to a high degree. Study in this paper deeply integrates the method of data augmentation based on GAN and machine learning modeling, which can be integrated into the workflow of detailed urban design and sustainable construction in the future.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_007
id	ascaad2014_007
authors	Al-Rawi, Osama
year	2014
title	Evolutionary Algorithms in Islamic Architecture
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 99-107
summary	The cosmological nature of Islamic architecture makes it a useful case study for the capability of the adaptation, assimilation and accommodation with the development of evolutionary algorithms and their applications in architectural design. Genetic algorithm derives its structure from the observation of nature. We shall review the concept of intelligent agents and their organization into complex adaptive systems as well as genetic-type algorithms for learning and evolution. Since algorithmic art consists of generation of images on the basis of algorithms, algorithms can be viewed as a notation, and notation is something that music has but visual artefacts in general miss. This paper aims to discover the role of evolutionary algorithms in historical Islamic architecture. Also, we shall try to investigate the way in which the future development could occur not only through the discovery of new facts or theories, but also through the rise and dissemination of new visions having different explanation of Islamic architecture that considers it as a result of serious application of formation through evolutionary genetic algorithms.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ascaad2014_036
id	ascaad2014_036
authors	Assassi, Abdelhalim; Belal Taher and Samai Rachida
year	2014
title	Intelligent Digital Craft to Recognize Spatial Installations for Residential Designs: Approach to Understand the Design of Housing Barbaric in Algeria using the Majali Composition Software
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 195-196; 443-456
summary	Architecture took an evolutionary context over time, where designers were interested in finding pragmatic spontaneous appropriate solutions and met the needs of people in urban and architectural spaces. Whereas, in modern architecture an intense and varied competition happens between architects through various currents of thoughts , schools and movements, however, that creativity was the ultimate goal , and a the same time we find that every architect distinguishes himself individually or collectively through tools of architectural expression and design representation adopting a school of thought, using , for example, the leaves of various sizes and diverse technical drawing tools to accurately show that he can be read by professionals or craftsmen outside the geographical scope to which it belongs .With the rapid technological development which accompanied the digital craft in the contemporary world , The digital craft summed up time, distance and tools , so they gave the concept more appropriate accuracy , as virtualization has become the most effective tool for Architecture To reach the ideal and typical results at the practical level, or pure research. At the level of residential design and on the grounds that housing plays an important role in the government policies and given that housing is a basic unit common to all urban communities on earth , the use of different programs to show its typicality in two dimensions or in the third dimension - for example, using software "AutoCAD " " 3D Max " , " ArchiCAD " ... etc. - gave virtualisation smart, creative and beautiful forms which lead to better understand the used /or to be used residential spaces, and thus the conclusion that the life system of dwelling under design or under study , as can specifically recognize spatial structure in housing design - using digital software applying "Space Syntax" for example - in the shadow of slowly growing digital and creative development with the help of high-speed computers . the morphological structure of the dwelling is considered to be the most important contemporary residential designs Investigation through which the researcher in this area aims to understand the various behavioral relations and social structures within the projected residential area, using Space Syntax techniques. Through the structural morphology of dwellings can be inferred quality networks, levels of connectivity and depth and places of openness or closure within the dwelling under study, or under design. How, then, have intelligently contributed this digital craft to the perception of those spatial fixtures ? The aim of this research is to apply an appropriate program in the field of vernacular residential design and notably Space syntax which relate to the understanding and analysis of spatial structures, and also demonstrate its role at the morphological and spatial structure aspects, and prove how effective it helps to understand the social logic of domestic space through social individual/collective relationships and behaviors projected on the spatial configurations of dwellings. The answer to the issue raised above and at the methodological aspect, the study discussed the application of space syntax techniques on the subject. The findings tend to prove the efficiency by comparing samples of Berber vernacular domestic spaces from the Mzab, the Aures and Kabilya in Algeria, and has also led to ascertain the intelligibility of space syntax techniques in reading the differences between the behaviors in domestic spaces in different areas of the sample through long periods of time .
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:39

_id	caadria2014_145
id	caadria2014_145
authors	Aydin, Serdar and Marc Aurel Schnabel
year	2014
title	A Survey on the Visual Communication Skills of BIM Tools
doi	https://doi.org/10.52842/conf.caadria.2014.337
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 337–346
summary	Building Information Modelling (BIM) applications are supported by various modelling tools, being expansive to deliver visualised geometry and databases simultaneously. But there is still a gap in visual communication amongst its professionals. Articulating the advantages of fully Web-based collaboration, this paper looks into how BIM tools make contribution to visual communication between different parties working collaboratively. A hybrid model of low-level and high-level interactions is tentatively conceptualised. Based on the hybridised model, a survey is conducted to elucidate a few experiential matters such as visual aesthetics, cognition and motivational impacts of visualisation in BIM tools. Following the survey, a discussion is oriented towards a new storytelling methodology with a novel term, namely gamification. Seeking motivating and efficient means of visual communication between human-human, human-tool and human-model interactions, the present study focuses on an enhanced legibility and appreciation of tools by those who are involved in BIM projects.
keywords	Narrative visualisation; infinite computing; information aesthetics; gamification; hybrid model of interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2014_053
id	ecaade2014_053
authors	Baris Cokcan, Johannes Braumann and Sigrid Brell-Cokcan
year	2014
title	Performative Wood
doi	https://doi.org/10.52842/conf.ecaade.2014.2.131
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 131-138
summary	This research builds upon projects from both university and practice to explore new approaches on how the multifunctionality, flexibility, and performance of wood can be utilized to inform new approaches towards both design and fabrication. The following projects use physical prototypes to bend wood just within its tolerances, design with the high precision of multi-axis robotic fabrication in mind, and finally inform the shape of a large free-form structure through material properties.
wos	WOS:000361385100013
keywords	Wood; high-performance material; cnc; robotic fabrication; geometric design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2014_229
id	sigradi2014_229
authors	Bessone, Miriam Clemencia; Maria Elena Tosello, Matias Dalla Costa
year	2014
title	Experiencias paramétricas en la formación del Arquitecto: Ensayo de aplicación a los Talleres Iniciales [Parametric experiences in architect’s education: case of application in a basic design studio]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 241-244
summary	In the actual textual landscape, images work activating cognitive and behavioral processes, disrupting the anthropological context of critical thinking based on logical-formal reasoning. Different types of languages –carrying specific signs and syntax- entwine to oral and written text, augmenting the differences and introducing new problematic in education, situation that requires to be investigate, debate and adequate. From this statement and through the presentation of a didactic experience of parametric systems application in a beginning design studio of Architecture, this paper aims to contribute to the discussion of which are the notions and basic strategies needed to initiate significant learning process that allow to think and design starting from emergent design languages.
keywords	Didactic Strategies; Design Strategies; Parametric Design; Architecture
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_144
id	sigradi2014_144
authors	Böhme, Luis Felipe González; Cristián Calvo Barentin
year	2014
title	Desarrollo de competencias avanzadas en computación en la formación de los arquitectos latinoamericanos del siglo XXI [Advanced Computing Competence Development in 21st-century Latin American Architects’ Education]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 217-221
summary	Automation and robotics are increasingly penetrating all types of industries in developed countries including architecture, i.e., products and services related to architectural practice. Therefore, more than ever, architects, designers and artists are interested in developing computational thinking skills to be able to integrate more functionality into their creations and take direct control of their fabrication. But what can a small school of architecture in Latin America do to prevent the deskilling of its graduates and, instead, create new labor opportunities for them abroad. Third-year students integrate physical computing with visual programming in an active learning environment to develop free proposals.
keywords	Architectural education; Physical computing; Visual programming; Computational thinking; Active learning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_347
id	sigradi2014_347
authors	Cardellino, Paula; Claudio Araneda
year	2014
title	Mapeo Vivencial del Fenómeno Enseñanza - Aprendizaje en el Espacio de Aula Escolar – El Caso de Uruguay [Sensorial Mapping of the Teaching – Learning Phenomena in the Classroom Space – The Case of Uruguay]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 144-145
summary	Children are entitled to equal access to education; this applies to the classroom setting. The classroom size, shape and layout are commonly taken for granted and little consideration is taken to how this affects the learning experience. This paper argues that the traditional classroom environment does not allow for equal interaction between teachers and pupils. Preliminary findings of a case study in 4 classrooms in Uruguay are presented. The conclusions suggest that not all pupils in the classroom receive quality interaction with the teacher. A more comprehensive approach to designing spaces that are conducive to learning will benefit this interaction.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2014_080
id	caadria2014_080
authors	Chian, Eugene and Patrick Janssen
year	2014
title	Exploring Urban Configurations for a Walkable New Town Using Evolutionary Algorithms
doi	https://doi.org/10.52842/conf.caadria.2014.233
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 233–242
summary	Multi-objective evolutionary algorithms have been successfully applied within various design domains in order to explore the trade-offs between conflicting design criteria. This research investigates how evolutionary algorithms can be used to develop urban configurations for walkable new towns, focusing in particular on the trade-off between travelling time using public transport and accessibility to open space. A population of optimised urban configurations was evolved and analysed, resulting in the identification of three differing typologies for walkable new towns.
keywords	Urban structure; transportation network; urban density; multi-objective evolutionary algorithms
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: