Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 640

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_254
id	caadria2014_254
authors	Tuker, Cetin and Halil Erhan
year	2014
title	An Architectural Modeling Method for Game Environments and Visualization
doi	https://doi.org/10.52842/conf.caadria.2014.605
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 605–614
summary	Modeling 3D architectural environments for games and design visualization is different than modelling for other purposes, such as for construction. These models include only the outer surfaces as ‘skin’ structures of the facades for rendering for which existing tools are too complex. After interviewing fourteen domain experts and evaluating available modelling tools, we observed a need for new modelling methods for rapid visualizations that leaves redundant model parts out for efficiency. We have developed a surface modelling method and a formalism for modelling architectural environments by slicing a building into layers with strips of façade element sequences. In the first prototype, we focused on parametric structures using userdefined architectonic vocabulary such as voids and solids. We conducted an expert review study with four participants: two user-experience and two domain experts. All participants responded that the method is easy to learn even for non-experts. Based on the tasks completed, they agreed that the method can speed the process of modelling large continuous façades, single-mass single-storey geometries, and repetitive floor layers; they also made suggestions for improvement. The results from the initial evaluation show that the method presented has some merits to be used in practice.
keywords	3D modelling; facade reconstruction; game; visualization
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2014_013
id	ascaad2014_013
authors	Binhomaid, Omar and Tarek Hegazy
year	2014
title	Comparison between Genetic Optimization and Heuristic Methods for Prioritizing Infrastructure Rehabilitation Programs
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 175-182
summary	In recent years, infrastructure rehabilitation has been in the focus of attention in North America and around the world. A large percentage of existing infrastructure assets is deteriorating due to harsh environmental conditions, insufficient capacity, and age. Due to stringent budget limits, however, asset management systems become important to assess the life cycle performance of various assets, and accordingly prioritize the assets for rehabilitation purposes. While many asset management systems have been introduced in the literature, almost no studies have compared the effectiveness of their asset prioritization methods. This paper presents an extensive comparison between heuristic and optimization methods for prioritizing large-scale rehabilitation programs, under budget constraints. The paper first introduces different life cycle cost analysis (LCCA) formulations for three case studies obtained from the literature related to buildings, pavements, and bridges. Based on extensive experiments with the three case studies and on different network sizes, heuristic techniques proved its practicality for handling various network sizes. The performance of genetic optimization, on the other hand, was more efficient on small-scale networks but showed steep degradation in performance with large-scale problems. This research can be beneficial to municipalities and asset managers and can help them design efficient methods to sustain the safety and operability of the civil infrastructure, with least cost.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_030
id	sigradi2014_030
authors	Borges, Marina Ferreira; Ricardo Hallal Fakury
year	2014
title	Processo iterativo de design paramétrico e projeto estrutural aplicado ao desenvolvimento de torre eólica [Iterative process of parametric design and structural project applied to the development of lattice and wind power]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 35-38
summary	This article proposes to study the process of parametric design integrated analysis and structural design. This application model is called Performative Model; the form is generated based on performance criteria. The digital tools facilitate the information flow between designers using parametric model and Finite Element Analysis. To research the method of Performative Model is proposed the development of a conceptual framework of lattice wind tower with the aim of a quantitative and qualitative structure optimization. Therefore, the parametric modeling will be done using Rhinoceros software, the plugin for creating algorithms Grasshoper and structural analysis plugin Scan & Solve.
keywords	Performative model; Parametric model; Finite Element Analysis; Lattice Wind Tower
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia14projects_55
id	acadia14projects_55
authors	Carlow, Jason
year	2014
title	Parametric Façade Systems: Performance-Driven design for ultra-thin buildings in Hong Kong
doi	https://doi.org/10.52842/conf.acadia.2014.055
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 55-58
summary	Through design research, analysis and modeling, the project seeks to distort the standardizing forces of building code limitations, economic concerns and mass production on the built environment. The project presents a proposal for an extremely thin building type that features a more responsive, better integrated façade developed with parametric design tools.
keywords	Parametric Design, Pre-fabrication, Façade Systems, Digital Fabrication, Linear Domesticity, Building Code
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	sigradi2014_132
id	sigradi2014_132
authors	Hu, Yongheng; Qinying Li, Feng Yuang, Han Li
year	2014
title	The BIM based Responsive Environmental Performance Design Methodology
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 120-125
summary	The concept of “families” lies in the core of internal data structure in Building Information Modeling (BIM). The elements of this modeling platform are all associated with each other as parts of the “families”, independent of their geometrical structure, materiality, parametric dependencies or their physical connection to other elements. Through the associations introduced among the parameters of the ‘families’ members, this study aims at establishing a methodology for a multi-objective evaluation of the environmental performance of the building as an organism. The methodology is founded on a system of different values and weights attributed to the parameters of the families members which are adjusted and fine-tuned through a series of iterations, thus affecting the overall building performance towards an optimum goal. The performance evaluation method used in the “families” methodology is not limited to the individual assessment of the environmental performance objectives or to an integrated multi-objective weighting mechanism; as an overall evaluation platform it checks and balances the individual characteristics of the system not as static conclusive results but as dynamic criteria intended to guide the overall design and building process. The importance of this paper lies in the construction of a concrete methodological set of tools for the assessment of the environmental performance of the building. It will lead the way in independent research in the field of architectural design and the development of ecological thinking and building in China.
keywords	BIM ‘families’; Multi-Objective Generic Algorithm; Environmental Performance Simulation; Multi-Objective Environmental Performance Optimization
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2014_244
id	sigradi2014_244
authors	Manica, Carlo Rossano; Fábio Gonçalves Teixeira, Underléa Miotto Bruscato, Leonardo Barili Brandi, Osorio Schaeffer, Renan Willian Leite Pereira
year	2014
title	Processo de Fabricação Digital de Artefato para Transporte de Maças [Digital Process for Manufacturing Artifact for Apples Transport]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 324-327
summary	This article presents the result of the activities carried out for the discipline of the program Master in Design and Technology (UFRGS), Digital Manufacturing Process as a Tool for Project. It aimed to develop a product based on digital manufacturing process. With this purpose, was designed a package for the transport of apples. In order to achieve the goal the generation of alternatives was conducted through a game and Sketch Creative Brainstorming, followed by research on the product life cycle. Subsequently, was used parametric modeling software for the package design. The use of three-dimensional modeling software Rhinoceros together with the plug-in Grasshopper allowed the construction of three-dimensional parametric models. As a result, we obtained the creation of a product that can be adapted to other fruits, avoiding rework, and run through rapid prototyping, this being a consequence of the facilities of adoption of digital fabrication.
keywords	Digital fabrication; Parametric modeling; grasshoper; Packaging; Apple
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2014_024
id	ecaade2014_024
authors	Maycon Sedrez, Rafael Meneghel and Gabriela Celani
year	2014
title	Digital fabrication of a brise-soleil using fractal geometry as generative system
doi	https://doi.org/10.52842/conf.ecaade.2014.2.315
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 315-325
summary	Parametric design and digital fabrication are becoming ubiquitous tools to contemporary architecture and imply a different design process. With this new perception of the contemporary production we have designed a façade sun shade using fractal geometry as a generative system. Fractals are complex shapes generated with simple rules, so it is relatively easy to change the final geometry when we work with parameters. The design process made possible the creation of different options for the brise-soleil using parametric definitions. Some solutions were physically modeled using rapid prototyping, which we consider an essential tool in the contemporary design process. The whole process conducted to the conclusion that architects need to incorporate a new set of skills when working with digital fabrication. Keywords: fractal, design process, generative system, digital fabrication.
wos	WOS:000361385100033
keywords	Fractal geometry; generative system; digital fabrication; design process
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2014_224
id	ecaade2014_224
authors	Mohammad Rahmani Asl, Michael Bergin, Adam Menter and Wei Yan
year	2014
title	BIM-based Parametric Building Energy Performance Multi-Objective Optimization
doi	https://doi.org/10.52842/conf.ecaade.2014.2.455
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-464
summary	Building energy performance assessments are complex multi-criteria problems. Appropriate tools that can help designers explore design alternatives and assess the energy performance for choosing the most appropriate alternative are in high demand. In this paper, we present a newly developed integrated parametric Building Information Modeling (BIM)-based system to interact with cloud-based whole building energy performance simulation and daylighting tools to optimize building energy performance using a Multi-Objective Optimization (MOO) algorithm. This system enables designers to explore design alternatives using a visual programming interface, while assessing the energy performance of the design models to search for the most appropriate design. A case study of minimizing the energy use while maximizing the appropriate daylighting level of a residential building is provided to showcase the utility of the system and its workflow.
wos	WOS:000361385100048
keywords	Building energy performance analysis; building information model (bim); parametric modelling; parametric energy simulation; multi-objective optimization
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ascaad2014_015
id	ascaad2014_015
authors	Mueller, Volker
year	2014
title	Second Generation Prototype of a Design Performance Optimization Framework
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 199-209
summary	The integration of performance evaluation into the building design process becomes increasingly important in order to respond to demands on contemporary design with respect to the future of our built and natural environments. This paper presents work on the second iteration of an implementation of a design performance optimization framework that attempts to respond to the challenges of integrating analysis and optimization into the design process. Main challenges addressed are speed of feedback through implementation on the cloud, utilizing parallelization of computations and availability of results in the computational context of the model through leveraging the parametric nature of the application; The goal is to enable designers in their decision-making throughout the design process with focus on earlier phases of the design process during which changes can be implemented faster and at much lower costs than in later phases of design or even during construction and occupation.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_031
id	ascaad2014_031
authors	Roshanzamir, Shima and Morteza Farhadian Dehkordi
year	2014
title	A Model for Land Use Distribution Forecasting: To evaluate and negotiate with design scenarios
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 3853-394
summary	In designing and managing land use distribution, as a complex system, in addition to providing a visionary and intuitive strategy one should consider the rule based optimization processes and the internal autonomous forces. These ensure cities global eligibility besides their local efficiency and compatibility. This essay suggests a model to create negotiation between these two approaches. The tool is developed as an agent based model in a parametric environment and presented through a hypothetical case study. First, the system structure and behavior is defined and then through direct and indirect control tools, challenge was to achieve suggested design scenario without ignoring the self organizing behavior of agents.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_046
id	ecaade2014_046
authors	Yazg_ Aksoy and Gülen Cagdas
year	2014
title	A Model for Sustainable Site Layout Design with Pareto Genetic Algorithm: SSPM
doi	https://doi.org/10.52842/conf.ecaade.2014.1.227
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 227-238
summary	In architectural design, computer aided design tools have an important impact on design process, but still early design stage and sustainable design are problematic issues. During sustainable architectural design process, the designer needs to comply with some regulations, which requires calculations and comparisons. Green building certification systems are developed to assist designers during this complicated process, but for an efficient sustainable design for different regions, environmental information and local building codes must be considered with green building certification system criteria. In this paper, LEED and BREEAM certification systems are going to be considered as being the most representative building environment assessment schemes that are in use. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local building codes and environmental conditions; an efficient decision support system can be developed by using multi-objective genetic algorithm. This paper presents an effective site-use multi-objective optimization model that use pareto genetic algorithm to determine the most efficient sustainable site layout design for social housing, which could assist designers in the early stage of design process.
wos	WOS:000361384700022
keywords	Sustainable site layout design; multi objective genetic algorithm; leed-breeam
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2014_095
id	caadria2014_095
authors	Yekutiel, Tatyana Pankratov and Yasha Jacob Grobman
year	2014
title	Controlling Kinetic Cladding Components in Building Façades: A Case for Autonomous Movement
doi	https://doi.org/10.52842/conf.caadria.2014.129
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 129–138
summary	"The movement of building façade cladding is usually used to control buildings’ exposure to environmental conditions such as direct sunlight, noise and wind. Until recently, technology and cost constraints allowed for only limited types of façade cladding movement. One of the main restrictions stemmed from the limitations that architects face in designing and controlling movement scenarios in which each façade or cladding element moves autonomously. The introduction of parametric design tools for architectural design, combined with the advent of inexpensive sensor/actuator microcontrollers, made it possible to explore ways to overcome this limitation. Autonomous movement of building façade cladding elements has several potential benefits. One of the main feasible advantages of this type of movement is that it can deal with changing external and interior local conditions in different parts of the façade by individually controlled movement, by preceding reaction or flock behaviour. Thus, it can increase significantly the performance of the building façade. This paper presents new results from an ongoing research study that is examining the potential of autonomous movement of façade cladding elements. It compares the environmental performance of centrally controlled kinetic façade elements and a prototypic façade made of autonomously controlled elements.
keywords	Kinetic cladding components; responsiveness; interactive; decentralised control; Arduino
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2014_226
id	caadria2014_226
authors	Barrios, Carlos R.
year	2014
title	Parametric Visualization and Navigation in Multidimensional Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.543
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 543–552
summary	This paper presents a visual model to increase visualization and efficiency when working with parametric models. The formalistic model allows to visually track all possible variations of parameters in a logical structure showing all design variations at once. The paper introduces background information on typical arrangements of parametric modeling instances showing their limitations; presents the formalistic model for logical arrangement in multidimensional structures showing its advantages; and discusses an example of the application of the formalistic model showing a logical arrangements of designs in a hypercube matrix.
keywords	Parametric Modeling; Parametric Design; Parametric Variations, Parametric Visualization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_170
id	caadria2014_170
authors	Beirão, José Nuno; André Chaszar and Ljiljana _avi_
year	2014
title	Convex- and Solid-Void Models for Analysis and Classification of Public Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.253
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 253–262
summary	In this paper a semiautomated morphological classification of urban space is addressed systematically by sorting through the volumetric shapes of public spaces represented as 3-dimensional convex and solid voids. The motivation of this approach comes from a frequent criticism of space syntax methods for lacking information on how buildings and terrain morphology influence the perception and use of public spaces in general and streets in particular. To solve this problem information on how façades relate with streets and especially information about the facades’ height should be considered essential to produce a richer and more accurate morphological analysis of street canyons and other open spaces. Parametric modelling of convex voids broadens the hitherto known concept of two-dimensional convex spaces considering surrounding facades’ height and topography as important inputs for volumetric representation of urban space. The method explores the analytic potentials of ‘convex voids’ and ‘solid voids’ in describing characteristics of open public spaces such as containment, openness, enclosure, and perceived enclosure, and using these metrics to analyse and classify urban open spaces.
keywords	Open public space; convex voids; solid voids; user-guided feature recognition
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2014_208
id	ecaade2014_208
authors	Bruno Figueiredo, Eduardo Castro e Costa, Bruno Araújo, Fernando Fonseca, Daniel Mendes, Joaquim A Jorge and José Pinto Duarte
year	2014
title	Interactive Tabletops for Architectural Visualization - Combining Stereoscopy and Touch Interfaces for Cultural Heritage
doi	https://doi.org/10.52842/conf.ecaade.2014.1.585
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 585-592
summary	This paper presents an interactive apparatus to didactically explore Alberti's treatise on architecture, De re aedificatoria, as generative design systems, namely shape grammars. This apparatus allows users to interactively explore such architectonical knowledge in both appealing and informal ways, by enabling them to visualize and manipulate in real-time different design solutions. The authors identify the difficulties on encoding the architectural knowledge of a parametric design model into an interactive apparatus to be used by laypeople. At last, the authors discuss the results of a survey conducted to users that interacted with the prototype in order to assess its ability to communicate the knowledge of an architectural language.
wos	WOS:000361384700058
keywords	Alberti; generative design; multi-modal interfaces; shape grammars; user experience
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_008
id	ascaad2014_008
authors	Chokhachian, Ata and Abolfazl Dehghanmongabadi
year	2014
title	Critical Attitude toward the Footstep of Googie Architecture on Parametric Architecture
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 109-118
summary	Advent of machinery age, altering in human needs and lifestyle has changed the pattern of architecture. This pattern is in close relation with different environmental, contextual, behavioral and theoretical aspects of dwellers. With a glance to the history of design, in 1940s the new style of architecture came up which was called Googie architecture. It was a movement of modern architecture, a subdivision of futurist architecture influenced by car culture and the Space Age. This style was alive up to mid-1960s but in its short life, it put a big impact on the appearance of the cities and buildings. Furthermore, in recent years the new style of architecture named Parametricism has started to take shape and accordingly the formal appearance is very close to Googie architecture. Also parametric architecture is out birth of technology and the idea of communication and futurism. The research is questioning the characteristics of parametric and Googie architecture with scrutinizing the origins and main gestures of these styles in society and culture of the period that they exist in. the research tries to figure out failures of Googie style in its own period and parallel to this, it give suggestions to implement and transform qualitative parameters in the design process by means of adapting pattern language in design process, applying parametric design thinking and simplexity in design systems.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: