Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 655

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_298
id	caadria2014_298
authors	Yu, Rongrong; John Gero and Ning Gu
year	2014
title	Cognitive Effects of Using Parametric Modeling by Practicing Architects: A Preliminary Study
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 677–686
doi	https://doi.org/10.52842/conf.caadria.2014.677
summary	This paper presents the results of a protocol study which explores the cognitive behaviour of eight practicing architects while they used a geometric modeller (Rhino) with a parametric modeller (Grasshopper) as they designed. The protocol videos collected were transcribed, segmented and coded using the FBS ontology as the coding scheme. This resulted in each protocol being transformed from a qualitative video into a sequence of symbols from the FBS ontology and further divided into design knowledge and rule algorithm classes. The sequence of symbols forms the foundation on which quantitative representations of cognitive behaviour can be constructed and compared. Results of the relative cognitive effort expended on design knowledge and rule algorithm classes, through an articulation of the cognitive design issues, have been compared and discussed. These results provide insight into the use of parametric modellers by architects.
keywords	Design cognition; parametric modelling; protocol studies.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2014_095
id	caadria2014_095
authors	Yekutiel, Tatyana Pankratov and Yasha Jacob Grobman
year	2014
title	Controlling Kinetic Cladding Components in Building Façades: A Case for Autonomous Movement
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 129–138
doi	https://doi.org/10.52842/conf.caadria.2014.129
summary	"The movement of building façade cladding is usually used to control buildings’ exposure to environmental conditions such as direct sunlight, noise and wind. Until recently, technology and cost constraints allowed for only limited types of façade cladding movement. One of the main restrictions stemmed from the limitations that architects face in designing and controlling movement scenarios in which each façade or cladding element moves autonomously. The introduction of parametric design tools for architectural design, combined with the advent of inexpensive sensor/actuator microcontrollers, made it possible to explore ways to overcome this limitation. Autonomous movement of building façade cladding elements has several potential benefits. One of the main feasible advantages of this type of movement is that it can deal with changing external and interior local conditions in different parts of the façade by individually controlled movement, by preceding reaction or flock behaviour. Thus, it can increase significantly the performance of the building façade. This paper presents new results from an ongoing research study that is examining the potential of autonomous movement of façade cladding elements. It compares the environmental performance of centrally controlled kinetic façade elements and a prototypic façade made of autonomously controlled elements.
keywords	Kinetic cladding components; responsiveness; interactive; decentralised control; Arduino
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2014_207
id	caadria2014_207
authors	Beorkrem, Christopher and Charles Davis II
year	2014
title	A Primitive Parametric
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 893–902
doi	https://doi.org/10.52842/conf.caadria.2014.893
summary	This paper describes the products of an exhibition organized by the authors that speculatively reconstructed the ‘long history’ of Architectural Biology to recover the cultural potential of biological metaphors in contemporary architecture. The extended historical timeline of the show spanned from the second half of the nineteenth century to the present. However, in contrast to previous shows that have isolated modern architects’ interests in the formalist principles of biology, this show examined the formal and cultural prerogatives of modern architects in tandem with one another. This historical framework encouraged the speculative analysis of the social and political relevance of contemporary claims, which inherently challenges the ahistorical bias of the postcritical debates that emerged in the new millennium. Widening our gaze to examine the ‘long history’ of biological metaphors in architecture enabled us to recuperate the cultural significance that biological references have accrued within the discipline of architecture. This disciplinary history promises to repair the historical amnesia that has beset contemporary architects who limit their analysis of biology to formalist principles of design. A key component of the exhibit was the conceptual pairing of the ‘primitive’ (cultural) concerns of nineteenth-century figures with the ‘parametric’ (formal) concerns of postwar and contemporary architects. Using Gottfried Semper as a representative figure for the former position, we reinterpreted the inherent cultural meaning of postwar and contemporary architectural works, including those completed by Frei Otto, Achim Menges, Lars Spuybroek, SHoP, and Evan Douglis. The material potential of this approach was expressed in the making of analytical maps, digital models, and conceptual drawings that explored the latent ‘primitive’ themes of contemporary ‘parametric’ designs.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2020_542
id	ecaade2020_542
authors	Brown, Andre, Liu, Yisi, Webb, Nicholas and Knight, Mike
year	2020
title	Interpreting and exploiting narrative as a sketch design generator for application in VE
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 449-458
doi	https://doi.org/10.52842/conf.ecaade.2020.1.449
summary	The research in this paper focusses on how a narrative text can be the generator of an architectural drawing, or other architectural representation, such as an Architectural Virtual Environment. The drawn physical sketch has traditionally played that role. A particular approach to narrative has been important for some notable architects and their architecture. Ian Ritchie (2014), for instance, celebrates the use of poetry to describe the essential spirit of a scheme before any drawing is done. The work in the paper here describes the proposition to capture such narrative text in a systematic and structured way. We describe foundational work on how the captured narrative text has been translated into a contemporary, computer-mediated, design development environment. Different narrative accounts recalling a now demolished house form the focus case study. This case study is the vehicle through which the initial principles establishing how best to move from narrative to virtual representation are established and tested.
keywords	virtual environment; narrative; sketch; virtual reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ascaad2014_028
id	ascaad2014_028
authors	Hamza, Neveen
year	2014
title	Crafting the Virtual Sensory Environment: building performance simulation visualization as an enabler for creating sensory environments
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 353-359
summary	The sensory virtual environment is defined as a cognitive method leading to a mental model of potential value in gaining insights of how building spaces may perform to enhance the sensory experience of occupants. For architects, creating a sensory and experiential space is the holy grail of design endeavours. So far, the results of the experiential and sensory success of buildings are dependent on the architects’ own experience and judgment of materials and compositions within the space. Currently the use of tools such as 3D Max provides an ocular experience of the crafted virtual space, rarely giving indications of daylight and possible sensory experiences of the indoor thermal and acoustic conditions. In practice testing the thermal, daylight and other environmental performances of buildings at design stage is within the remit of building services consultants for conformity regulatory checks, and is dominated by extensive 2D (graphs) information exchanges. There is a need to include other formats of visual information exchanges to facilitate decisions on sustainable buildings and to achieve performing sensory environments This paper presents an exploration of endeavours to test the virtual sensory space through visualizations of building performance and aims to provide recommendations on how to fuse endeavours to disseminate knowledge within the design team while creating an information exchange mechanism that captures experts’ explicit and tacit knowledge. Case studies will be presented on how building performance simulation tools are used to provide matrices of relations to indicate the building performance, thermal comfort, daylight and natural ventilation and were used as an aid for architectural design decisions to create sensory environments.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_037
id	caadria2014_037
authors	Khoo, Chin Koi
year	2014
title	Designing a Responsive Material System with Physical Computing
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 97–106
doi	https://doi.org/10.52842/conf.caadria.2014.097
summary	This paper focuses on an investigation to explore architectural design potentials with a responsive material system and physical computing. Contemporary architects and designers are seeking to integrate physical computing in responsive architectural designs; however, they have largely borrowed from engineering technology’s mechanical devices and components. There is the opportunity to investigate an unexplored design approach to exploit the responsive capacity of material properties as alternatives to the current focus on mechanical components and discrete sensing devices. This opportunity creates a different design paradigm for responsive architecture that investigates the potential to integrate physical computing with responsive materials as one integrated material system. Instead of adopting highly intricate and expensive materials, this approach is explored through accessible and off-the-shelf materials to form a responsive material system, called Lumina. Lumina is implemented as an architectural installation called Cloud that serves as a morphing architectural skin. Cloud is a proof of concept to embody a responsive material system with physical computing to create a reciprocal and luminous architectural intervention for a selected dark corridor. It represents a different design paradigm for responsive architecture through alternative exploitation of contemporary materials and parametric design tools.
keywords	Physical computing; responsive material systems; adaptive architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2014_024
id	ecaade2014_024
authors	Maycon Sedrez, Rafael Meneghel and Gabriela Celani
year	2014
title	Digital fabrication of a brise-soleil using fractal geometry as generative system
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 315-325
doi	https://doi.org/10.52842/conf.ecaade.2014.2.315
wos	WOS:000361385100033
summary	Parametric design and digital fabrication are becoming ubiquitous tools to contemporary architecture and imply a different design process. With this new perception of the contemporary production we have designed a façade sun shade using fractal geometry as a generative system. Fractals are complex shapes generated with simple rules, so it is relatively easy to change the final geometry when we work with parameters. The design process made possible the creation of different options for the brise-soleil using parametric definitions. Some solutions were physically modeled using rapid prototyping, which we consider an essential tool in the contemporary design process. The whole process conducted to the conclusion that architects need to incorporate a new set of skills when working with digital fabrication. Keywords: fractal, design process, generative system, digital fabrication.
keywords	Fractal geometry; generative system; digital fabrication; design process
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia14_517
id	acadia14_517
authors	Peters, Brian
year	2014
title	Additive Formwork: 3D Printed Flexible Formwork
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp.517-522
doi	https://doi.org/10.52842/conf.acadia.2014.517
summary	Additive Formwork explores the potential and advantages of 3D printed, flexible formwork for architectural applications, specifically precast concrete panels. This research experiments with 3D printed malleable polymers as a mold at both a small and large scale, to determine the limitations and opportunities for architects and designers in construction.
keywords	Digital fabrication and construction3D Printing, Parametric Design, Robotic Fabrication, Flexible, Precast Concrete, Material Research
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 08:00

_id	ascaad2014_019
id	ascaad2014_019
authors	Sidawi, Bhzad
year	2014
title	The Role of Social Interaction in Empowering the Innovative Utilization of CAAD
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 253-262
summary	The production of Innovative projects is the ultimate goal of architects and the previous research highlighted that certain negotiation, collaboration and communications activities are essential to initiate creativity and produce innovative design products. CAAD systems help the architect in formulating and developing design ideas. Research studies have concentrated on the usability and shortages of these systems, the users' attitude, knowledge and their acceptance of these systems. However, few studies have investigated the relation between the social settings of a design studio and the utilization of CAAD systems. This research explores the link between the social settings and the utilization of CAAD in producing innovative design products. It argues that certain design studio's settings would affect the use of CAAD systems in an innovative way. In 2012, students at college of Architecture, University of Dammam were surveyed to find out how the design studio's settings would support/ hinder the utilization of CAAD systems. The survey results showed that innovative students, who undertake certain design and communication tasks, found that CAAD systems are more useful in producing innovative projects. The study makes recommendations on how to set healthy social interaction conditions in the design studio and initiate innovative behaviour while using CAAD systems during the design process.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_229
id	sigradi2014_229
authors	Bessone, Miriam Clemencia; Maria Elena Tosello, Matias Dalla Costa
year	2014
title	Experiencias paramétricas en la formación del Arquitecto: Ensayo de aplicación a los Talleres Iniciales [Parametric experiences in architect’s education: case of application in a basic design studio]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 241-244
summary	In the actual textual landscape, images work activating cognitive and behavioral processes, disrupting the anthropological context of critical thinking based on logical-formal reasoning. Different types of languages –carrying specific signs and syntax- entwine to oral and written text, augmenting the differences and introducing new problematic in education, situation that requires to be investigate, debate and adequate. From this statement and through the presentation of a didactic experience of parametric systems application in a beginning design studio of Architecture, this paper aims to contribute to the discussion of which are the notions and basic strategies needed to initiate significant learning process that allow to think and design starting from emergent design languages.
keywords	Didactic Strategies; Design Strategies; Parametric Design; Architecture
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_045
id	sigradi2014_045
authors	Hudson, Roland
year	2014
title	Knowledge Based Strategies for Parametric Design in Architecture
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 77-81
summary	Design professionals in the construction industry widely use the term “parametric”. Despite this there is a paucity of applied guidelines for developing parametric models. It is possible to attend workshops and learn the mechanics of a specific applications and access online repositories of ‘design patterns’, but the cognitive process of application in practice has received little recent attention. Analysis and experience of practice indicates that acquisition of new knowledge and capture of existing knowledge are the basis for all parametric tasks. This paper exposes a deeper understanding of the role of the parametric designer and proposes an applied strategic framework.
keywords	Parametric design; Design strategies; Computational thinking
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ascaad2014_021
id	ascaad2014_021
authors	Sushant, Verma and Pradeep Devadass
year	2014
title	Adaptive [skins]: Adaptation through smart systems
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 275-289
summary	The project investigates responsive building skin systems that adapt to the dynamic environmental conditions to regulate internal conditions in a habitable space over different periods of time by exhibiting a state of motion and dynamism. Passive and active building skins are developed using shape memory alloys and pneumatic actuators through investigations of smart systems that integrate smart materials and smart geometries. Nitinol springs are integrated in tensegrity systems to actuate the adaptive behaviour, which forms the passive roof system. Owing to the complexity of the multi-parametric system, genetic algorithms are developed for system optimization and calibrated with physical prototypes at varied scales. The developed systems are tested against two distinct climatic models- New Delhi and Barcelona, and evaluated for performance, based on heat and light, which are quantified as solar gain and illuminance as principles, and daylight factor for evaluation purpose. New tool-sets are developed in the process by combining various digital tools, to create a real-time feedback and memory loop system.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_061
id	caadria2014_061
authors	Zavoleas, Yannis
year	2014
title	Computational Thinking with Analogue and Digital Means
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 843–852
doi	https://doi.org/10.52842/conf.caadria.2014.843
summary	By elaborating on the significance of the drawing in the architectural avantgarde of the 1960s, the paper’s primary scope is to weave a thread between late modernism and contemporary research in computational design. The architectural drawing is presented as an abstract means aiding design research. The more recent notion of performative drawing evokes adaptability, being a critical precondition that responds to diverse design aims in interactive manners. Performative drawing's function may further be linked to patterns, a recurring research theme during late modernism. Thinking in (and with) patterns recalls approaching design problems through malleable schemas that hold design data, according to which they are being transformed. In respect, the present paper delves into the analogies between the manipulation of patterns with the use of drawings during late modernism and parametric processes developed through simulation patterns of the current era. Through this comparison, it becomes possible to stress out the operative significance of methodologies and conceptual means in the architectural making as tools that are being used primarily for the exploration of form’s dynamic behaviour.
keywords	Patterns; parametric architecture; late modernism; performative drawing; simulation
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_330
id	sigradi2014_330
authors	Alaçam, Sema
year	2014
title	The Many Functions of Hand Gestures While Communicating Spatial Ideas - An Empirical Case Study
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 106-109
summary	Physical dimensions of the designing activity these representations will probably exist Architects substantially develop their ideas in space through a visual apprehension of spatial relations. We aim to explore how hand gestures play role in presenting geometric features, spatial relations and ideas through a qualitative evaluation of an empirical case study. (100 words)
keywords	Architectural design environments; Hand gestures; Iconic gestures; Spatial thinking
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_187
id	ecaade2014_187
authors	Asli Cekmis
year	2014
title	Fuzzy computing for layout design in ill-defined, uncertain spaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 277-286
doi	https://doi.org/10.52842/conf.ecaade.2014.1.277
wos	WOS:000361384700027
summary	Layout design has been supported by some computational tools, where fuzzy systems have been approved as an appropriate method to handle uncertainty in the early design stage. In this paper, a new mathematical model depending on the fuzzy logic and sets theory is proposed to assist in layout design. The model distinctly deals with spatial uncertainty in open planned designs, where there is no clear layout configuration or definite patterns of usage. The model calculates the possibility of occupancy according to space, function and user related parameters and logical rules. It also visualises the architectural plan as being comprised of sub-spaces formed by the distribution of those possibilities. Sub-spaces are characterised as “Fuzzy Architectural Spatial Objects” (FASOs). As a result, layouts are represented as an accumulation of FASOs showing a certain inhabitation pattern. Various layouts can be generated within the identity of FASOs. Architects can evaluate the layouts and propose new ones by organising the FASOs on the plan and considering their relations. After describing the model the paper demonstrates an application which aims to design a proper layout for a major exhibition hall in Istanbul.
keywords	Spatial uncertainty; open-plans; inhabitation patterns; layout design; fuzzy architectural spatial objects (fasos)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_036
id	ascaad2014_036
authors	Assassi, Abdelhalim; Belal Taher and Samai Rachida
year	2014
title	Intelligent Digital Craft to Recognize Spatial Installations for Residential Designs: Approach to Understand the Design of Housing Barbaric in Algeria using the Majali Composition Software
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 195-196; 443-456
summary	Architecture took an evolutionary context over time, where designers were interested in finding pragmatic spontaneous appropriate solutions and met the needs of people in urban and architectural spaces. Whereas, in modern architecture an intense and varied competition happens between architects through various currents of thoughts , schools and movements, however, that creativity was the ultimate goal , and a the same time we find that every architect distinguishes himself individually or collectively through tools of architectural expression and design representation adopting a school of thought, using , for example, the leaves of various sizes and diverse technical drawing tools to accurately show that he can be read by professionals or craftsmen outside the geographical scope to which it belongs .With the rapid technological development which accompanied the digital craft in the contemporary world , The digital craft summed up time, distance and tools , so they gave the concept more appropriate accuracy , as virtualization has become the most effective tool for Architecture To reach the ideal and typical results at the practical level, or pure research. At the level of residential design and on the grounds that housing plays an important role in the government policies and given that housing is a basic unit common to all urban communities on earth , the use of different programs to show its typicality in two dimensions or in the third dimension - for example, using software "AutoCAD " " 3D Max " , " ArchiCAD " ... etc. - gave virtualisation smart, creative and beautiful forms which lead to better understand the used /or to be used residential spaces, and thus the conclusion that the life system of dwelling under design or under study , as can specifically recognize spatial structure in housing design - using digital software applying "Space Syntax" for example - in the shadow of slowly growing digital and creative development with the help of high-speed computers . the morphological structure of the dwelling is considered to be the most important contemporary residential designs Investigation through which the researcher in this area aims to understand the various behavioral relations and social structures within the projected residential area, using Space Syntax techniques. Through the structural morphology of dwellings can be inferred quality networks, levels of connectivity and depth and places of openness or closure within the dwelling under study, or under design. How, then, have intelligently contributed this digital craft to the perception of those spatial fixtures ? The aim of this research is to apply an appropriate program in the field of vernacular residential design and notably Space syntax which relate to the understanding and analysis of spatial structures, and also demonstrate its role at the morphological and spatial structure aspects, and prove how effective it helps to understand the social logic of domestic space through social individual/collective relationships and behaviors projected on the spatial configurations of dwellings. The answer to the issue raised above and at the methodological aspect, the study discussed the application of space syntax techniques on the subject. The findings tend to prove the efficiency by comparing samples of Berber vernacular domestic spaces from the Mzab, the Aures and Kabilya in Algeria, and has also led to ascertain the intelligibility of space syntax techniques in reading the differences between the behaviors in domestic spaces in different areas of the sample through long periods of time .
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:39

_id	ijac201412408
id	ijac201412408
authors	Bueno, Ernesto and Benamy Turkienicz
year	2014
title	Supporting Tools for Early Stages of Architectural Design
source	International Journal of Architectural Computing vol. 12 - no. 4, 495-512
summary	In architectural design, pencil and paper remain the most frequently used media to create freehand drawings to support early design stages. Digital tools conventionally used by architects lack appropriate functionalities and do not offer friendly interfaces for the early stages of architectural design.These are the bad news.The good news are twofold: a) hardware already available can help freehand designers todigitally express their first ideas; and b) functionality principles present in experimental software combined with appropriate hardware could successfully provide a friendly and intuitive human-computer interaction in the early stages of architectural design.This paper takes special attention to the way architects interact with computers, how input devices constrain possible interactions and how functionalities can be explored through these interactions.The article summarizes basic principles to be considered in the development of an all-in-one software and create a scenario whereby these principles are simulated on a hypothetical software to be used during the early stages of architectural design.
series	journal
last changed	2019/05/24 09:55

For more results click below: