Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 661

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_120
id	caadria2014_120
authors	Hack, Norman; Willi Viktor Lauer, Fabio Gramazio and Matthias Kohler
year	2014
title	Mesh Mould: Differentiation for Enhanced Performance
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 139–148
doi	https://doi.org/10.52842/conf.caadria.2014.139
summary	Mesh-Mould is a novel robotic fabrication system for complex, non-standard concrete structures. The system folds together formwork and reinforcement, the two most labour intensive aspects of concrete constructions and offers an alternative approach to the current modes of prefabrication by suggesting an in-situ fabrication process (Figure 1). The paper outlines the development of the Form-work/Reinforcing Meshes through several iterations of physical and digital tests. Initially starting from simple triangulated 3D lattices, the structures evolved to become more complex and differentiated. The incorporating of flow enhancing ducts and surface perimeters with diverse surface aperture densities facilitates an optimal concrete flow and material distribution within the mesh.
keywords	Robotic fabrication; concrete formwork; differentiation; spatial extrusion
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2014_138
id	ecaade2014_138
authors	Martin Tamke, Ina Blümel, Sebastian Ochmann, Richard Vock and Raoul Wessel
year	2014
title	From Point Clouds to Definitions of Architectural Space - Potentials of Automated Extraction of Semantic Information from Point Clouds for the Building Profession
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 557-566
doi	https://doi.org/10.52842/conf.ecaade.2014.2.557
wos	WOS:000361385100058
summary	Regarding interior building topology as an important aspect in building design and management, several approaches to indoor point cloud structuring have been introduced recently. Apart from a high-level semantic segmentation of the formerly unstructured point clouds into stories and rooms, these methods additionally allow the extraction of attributed graphs in which nodes represent rooms (including room properties like area or height), and edges represent connections between rooms (doors or staircases) or indicate neighborhood relationships (separation by walls). In this paper, we investigate possible applications of these approaches in architectural design and building management and comment on the possible benefits for the building profession. While contemporary practice of spatial arrangement is predominantly based on the manual iteration of spatial topologies, we show that the segmentation of buildings in spaces along with the untraditional more abstract graph-based representations can be used for design, management and navigation within building structures.
keywords	3d scanning; point cloud processing; bim; facility management; space syntax
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ascaad2014_027
id	ascaad2014_027
authors	Hadilou, Arman
year	2014
title	Flexible Formwork: A methodology for casting funicular structures
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 345-352
summary	This paper describes a method for design and fabrication of funicular structures from discrete precast concrete components. It has a critical look over traditional casting techniques and proposes a new methodology to fabricate a flexible formwork. The design process is engaged with a thorough series of analytical models and employs digital computation techniques to test their structural efficiency. Scripting, modeling and prototyping have been integrated to investigate several case studies through which a set of criteria was developed. Digital modeling tries to keep a limited number of varied components that have certain conditions at joints and flexible in other parts. This variation helps to meet the structural criterion and the flexibility of formwork results the efficiency of fabrication.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14projects_71
id	acadia14projects_71
authors	Kalo, Ammar; Newsum, Michael Jake
year	2014
title	Robotic Incremental Sheet Metal Fabrication
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 71-74
doi	https://doi.org/10.52842/conf.acadia.2014.071
summary	Building on previous and current work, this research utilizes the Single Point Incremental Forming (SPIF) process to produce mass customized, double-curved (both positive and negative Gaussian curvature), three-dimensional forms from sheet metal.
keywords	Incremental Sheet Forming, Parametric, Computational Design, Fabrication, Sheet Metal, Architectural Skins, Digital fabrication and construction.
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:52

_id	ecaade2014_060
id	ecaade2014_060
authors	Koki Akiyoshi and Hiroya Tanaka
year	2014
title	Local-reconfigurable Freeform surface with plywood - From the perspective of Japanese Tsugite-Shiguchi
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 527-535
doi	https://doi.org/10.52842/conf.ecaade.2014.1.527
wos	WOS:000361384700052
summary	This research exhibits a novel construction method for Freeform surfaces with plywood, without using metal joints and bending. By introducing the perspective of Japanese Tsugite-Shiguchi, the research aims for a drastic change from node-oriented thinking to module-oriented thinking. This paper focuses on the investigation of how to simplify fabrication processes, how to realize the environmental capabilities of Freeform wood structures, and how to provide redundancy and stability to the whole architectural system. In order to challenge these problems, we examined three discretion methods. As a result, we have been successful to produce a double-layered surface, filled with triangular mesh, implemented only by cutting one sheet of plywood. Moreover, the system has also acquired a new nature: local-reconfigurability, wherein it can react and adapt to fit local parameters and requirements.
keywords	Digital fabrication; freeform timber; without metal and bending; discrete surface; minimal components for mega-assembly
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2014_159
id	ecaade2014_159
authors	Leyla Yunis, Ond_ej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn and Achim Menges
year	2014
title	Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2014.1.423
wos	WOS:000361384700042
summary	Research pavilions can serve as architectural scale demonstrations for the materialization of experimental forms and structures. Pavilions seek to prove and change methods of design and construction mechanisms in order to achieve desires such as material efficiency, novel spatial qualities and performative needs. The case of the ICD/ITKE Research Pavilion 2013-14 highlights the use of fiber composites in order to achieve a core-less filament winding modular system from bio-inspired lightweight structures through robotic fabrication. This paper describes the multi-disciplinary design and construction process of this pavilion that created a structure of out 36 unique components.
keywords	Bio-inspired; fiber composites; multi-disciplinary design; robotic fabrication; modular system construction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia14_375
id	acadia14_375
authors	Maxwell, Iain; Pigram, David; Egholm-Pedersen, Ole
year	2014
title	Fabrication Aware Form-Finding: A Combined Quasi-Reciprocal Timber and Discontinious Post-tensioned Concrete Structure
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 375-383
doi	https://doi.org/10.52842/conf.acadia.2014.375
summary	This paper describes innovations in fabrication-aware form-finding applied to two novel construction methods: one for quasi-reciprocal timber frames, the other for post-tensioned precast concrete structures. A pavilion which applies all innovations serves as a case study.
keywords	Fabrication-aware form-finding, precast concrete, reciprocal frame, multi-axis timber construction, material logics and tectonics, digital fabrication
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2014_167
id	ecaade2014_167
authors	Pavlos Fereos and Marios Tsiliakos
year	2014
title	Isoprototyping - Rapid Robotic Aided Fabrication for Double Curvature Surfaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 433-443
doi	https://doi.org/10.52842/conf.ecaade.2014.1.433
wos	WOS:000361384700043
summary	IsoPrototyping is a research initiative, undertaken at the Institute fur experimentelle architektur.hochbau, within the context of the Vertiefung Hochbau and Sonderkapitel des hochbaus courses, which specialize on building construction. Through the case study of an iso-surface spatial configuration, this research targets the exploration of innovative digital prototyping methodologies, that would allow rapid and cost-efficient fabrication, capable of manufacturing any given double curved surface. The ABB industrial robots of REX-Lab programmed in combination with custom designed, recalibrated dry-mold, surface-producing apparatus, formed the framework for a proficient, yet flexible, process describing and fabricating implicit non-linear systems.
keywords	Industrial robots; pin-board; rapid-prototyping; dry-recalibrated mould; digital-fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia14_523
id	acadia14_523
authors	Tracy, Kenneth; Yogiaman, Christine; Tessmer, Lavender
year	2014
title	Tensile Effects: Semi-rigid concrete formwork
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 523-530
doi	https://doi.org/10.52842/conf.acadia.2014.523
summary	This paper describes ongoing research in developing thin plastic formwork for multi-story, cast-in-place concrete structures. These techniques build upon Cast Thicket, a previous installation which provides a built example of the system.
keywords	Plastic Cast Concrete, Flexible Molds, File-to-Fabrication, Minimal Surface Optimization, Physics Simulation, Digital Craft, Material Logics and Tectonics
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:57

_id	ecaade2014_133
id	ecaade2014_133
authors	Armando Trento, Antonio Fioravanti and Francesco Rossini
year	2014
title	Health and Safety Design by means of a Systemic Approach - Linking Construction Entities and Activities for Hazard Prevention
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 633-642
doi	https://doi.org/10.52842/conf.ecaade.2014.1.633
wos	WOS:000361384700063
summary	Education and Research in Computer Aided Architectural Design in Europe faces many urgent tasks. Among the Architecture, Engineering and Construction (AEC)international scientific societies, only few researches systematically investigate on how to integrate the design solutions with Health and Safety (HS) planning measures, enhancing a collaborative “fusion” of all involved actors in Design and Construction decision making. Process automation cannot be enhanced until design/management tools, such as Building Information Models, can rely only on entities formalised "per se" geometrical items fulfilled by isolated-object specific information. To face complex problems, BIM models should be able to implement and manipulate multiple sets of entities, qualified by clearly established relationships, belonging to organically structured and oriented (sub-) systems. This paper reports on an early stage research project, focused on the identification of operative rules for Health and Safety design. Implementation on the unique case study of Palazzo della Civiltà Italiana functional refurbishment faces two main objectives: one, more pragmatic, is concerned with boostingworkers education about non-standard operative tasks, by means of accurate ad-hoc construction narrative visualisation; another one, more challenging and theoretically complex, consists in modelling "judgment-based" rules, aimed at supporting automated reasoning in Safety Design.
keywords	Construction hazards prevention through design; project construction management and visualization; health and safety management; risk modelling; knowledge representation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_142
id	caadria2014_142
authors	Chandra, Daniels and Ning Zhou
year	2014
title	BIM Add-on Tool for Automated CUI Calculation
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2014.305
summary	The Building and Construction Authority (BCA) of Singapore established Sustainable Construction Master Plan with the goal of achieving a Sustainable Singapore Blueprint. The Concrete Usage Index (CUI) is a part of Sustainable Construction scoring under Singapore’s ‘Green Mark’ system. Since computation of CUI score was formerly calculated manually without the use of BIM software, it was an inaccurate and tedious process. Although calculation of CUI is currently much faster through the use of BIM software, it still faces challenges. The objective of this project is to address those challenges by creating a BIM addon tool which is capable of automating the process of CUI calculation with minimum user input. Our intention is to help the industry to calculate CUI systematically and efficiently while promoting the adoption of BIM.
keywords	CUI; Concrete Usage Index; BIM; Green Mark; sustainable design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2014_099
id	caadria2014_099
authors	Koh, Immanuel
year	2014
title	Generative-Glass: Prototyping Generative Architectural Systems with Artisan’s Glass-Blowing and Automated Digital Fabrication Techniques
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 389–398
doi	https://doi.org/10.52842/conf.caadria.2014.389
summary	This paper aims to investigate the ways in which the traditional processes of glassblowing techniques could be incorporated with contemporary generative design processes in the realization of new novel architectural systems. Pedagogical issues on how such prototyping processes could be better integrated within architectural education are also discussed. With the use of algorithmic design methodology to generate/visualize the components assembled in multitudes and digital fabrication machineries to produce the necessary moulds/jigs/tools/connection joints, a series of 5 different glass prototypes have been actualized at the scale of 1:1 or otherwise. The work is the direct outcome of a new programme founded and directed by the author as part of the Architectural Association (AA) School of Architecture‘s Visiting School in 2013. Part 1 briefly introduces the specific agenda and how the corresponding structure of the programme is designed to facilitate the glass research work done concurrently at the digital fabrication laboratory and glassblowing studio. Part 2 would systematically discuss in detail the design of each of the 5 main glass prototypes made, presented alongside photographs and diagrams to illustrate the prototypes’ respective assembly and fabrication logics. Part 3 would evaluate the work done and project plans for the next iteration of the research in 2014.
keywords	Glass; Digital Fabrication; Generative Design; Traditional Crafts
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2022_431
id	ecaade2022_431
authors	Sieder-Semlitsch, Jakob and Nicholas, Paul
year	2022
title	Self-Serveying Multi-Robot System for Remote Deposition Modelling
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 233–240
doi	https://doi.org/10.52842/conf.ecaade.2022.1.233
summary	The need for increased automation of the AEC sector has been extensively documented within the architectural discipline over recent years. Far beyond economic perspectives, current advances in technology offer an increased and more direct implementation of sustainable materials. Within this research, the potential for the re-use of material with low embodied energy within automated construction will be examined. Herefore, Remote Material Deposition (RDM, firstly described in Dörfler et al., 2014) is utilized as main fabrication method, deploying varying compositions of local building debris, lime mortar, and sand, via a throwing arm. This research explores a method of continuous verification of material deployment and removal of material oversaturation to guarantee accuracy. Herefore, all instances of the robot ecology are in direct communication with one another and the user for verification, adaptation, and information. The proposed framework is examined through experimentation by designing, building, and implementing an inter-communicative network of bespoke semi-autonomous robots with all proposed parts of the system.
keywords	Construction Automation, Material Reuse, Onsite Construction, Self Verifying System, Robot Ecology, Additive Manufacturing
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2021_291
id	caadria2021_291
authors	Bansal, Medha and Erdine, Elif
year	2021
title	Bio-Mineralisation And In-Situ Fabrication Of In-Dune Spaces: Case Study Of Thar Desert
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.caadria.2021.1.493
summary	Desertification has made large productive landscapes in the South-west Thar desert redundant, subjected people to migration and induced a constant influx of sand into the region (Singhvi and Amal, 2014). The abundance of sand creates an opportunity to adopt an existing technique, Bio-mineralisation, to develop a sand based composite material which, when treated with a construction binder like sodium alginate, can be used for engineering purposes. The paper sets a theoretical framework to develop a fabrication mechanism with microbial-grout injections and propose the development of in-dune/underground assembly of habitable spaces. Each of the sub-components of material system, fabrication mechanism and In-dune structures are detailed, and evaluated to devise a hierarchy between them. Their interdependencies together inform design strategies, a phasing plan and global time scale for overall terrain transformation.
keywords	Bio-mineralisation; Bio-grouting; In-dune fabrication; Tool path algorithms; Micro-climate analysis
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia14_453
id	acadia14_453
authors	Bell, Brad; Read, T. Cord; Ede, Austin; Barnes, Nathan
year	2014
title	Casting non-repetitive Geometries with Digitally Reconfigurable Surfaces
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 453-462
doi	https://doi.org/10.52842/conf.acadia.2014.453
summary	The research is a digitally reconfigurable formwork, controlled by Arduinos and stepper motors, capable of producing a wide range of geometric outcomes for largel-scale panel prototypes using concrete or composite materials.
keywords	Reconfigurable Molds, Panelized Surfaces, Precast Concrete, Digital Fabrication and Constructions, 3D Printing, Arduinos, Material Logics and Tectonics
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia14projects_201
id	acadia14projects_201
authors	Burger, Shane
year	2014
title	South Australian Health and Medical Research Institute (Sahmri)
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 201-204
doi	https://doi.org/10.52842/conf.acadia.2014.201
summary	An outline of the workflow used on the SAHMRI project from design through to fabrication and assembly. SAHMRI, which opened in 2014, features a doubly-curved glass and metal facade with exterior solar fins for shading.
keywords	Building Information Modelling, Digital Fabrication and Construction, Computational design analysis
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:54

_id	caadria2014_201
id	caadria2014_201
authors	Cabrinha, Mark N.
year	2014
title	Lattice Shell Methodologies
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 191–200
doi	https://doi.org/10.52842/conf.caadria.2014.191
summary	This paper outlines a working methodology for the parametric development of lattice shell structures combining surface topology and form-finding with the material constraints of straight lath members woven into a geodesic network. By employing non-uniform grid spacing, a wider typology of spatial types can be employed than can be achieved with traditional flat-matt lattice shell construction. As a parametric design tool and working methodology, some of the heavy lifting in form-finding and geodesic analysis can be off-loaded to the tool, such that a more comprehensive attention can be placed on other design criteria such as spatial development and environmental response while maintaining the elegance and economy of lattice shells.
keywords	gridshells; geodesics; form-finding; bending-active structures; wood; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia14projects_55
id	acadia14projects_55
authors	Carlow, Jason
year	2014
title	Parametric Façade Systems: Performance-Driven design for ultra-thin buildings in Hong Kong
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 55-58
doi	https://doi.org/10.52842/conf.acadia.2014.055
summary	Through design research, analysis and modeling, the project seeks to distort the standardizing forces of building code limitations, economic concerns and mass production on the built environment. The project presents a proposal for an extremely thin building type that features a more responsive, better integrated façade developed with parametric design tools.
keywords	Parametric Design, Pre-fabrication, Façade Systems, Digital Fabrication, Linear Domesticity, Building Code
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

For more results click below: