Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 662

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2014_065
id	ecaade2014_065
authors	Daniel Prohasky, Rafael Moya Castro, Simon Watkins, Jane Burry and Mark Burry
year	2014
title	Wind sensing with real-time visualisations for Designers - An approach to understanding wind phenomena for pedestrian comfort using low cost wind sensors
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 165-171
doi	https://doi.org/10.52842/conf.ecaade.2014.1.165
wos	WOS:000361384700016
summary	The evaluation of a low-tech wind sensing platform for urban aerodynamic simulations relevant to pedestrian comfort. In this paper, the wind canyon effect is simulated with two different building morphologies. The platform provides conceptual knowledge of the dynamics in wind relevant for designers, architectural practitioners and students of design. Low-cost hot wire anemometry is utilised for the design of an Experimental Fluid Dynamic (EFD) wind sensing network interface. This paper explores the validity of the sensing platform for a new approach for non-wind engineers to gain a better understanding of the dynamics of wind. The influence of real-time feedback from quantified wind on the understanding of wind phenomena for non-wind engineers is discussed and compared with post analysis data. It was found that real-time quantified feedback from wind intrigues and stimulates the intuitive notion of wind dynamics through discussion, however post analysis remains critical to evaluate building design performance.
keywords	Wind sensing; real-time feedback; experimental fluid dynamics; hot-wire anemometry; atmospheric boundary layer
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_067
id	ecaade2014_067
authors	Mehrnoush Latifi Khorasani, Jane Burry and Mahsa Salehi
year	2014
title	Thermal performance of patterned facades - Studies on effects of patterns on the thermal performance of facades
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2014.1.267
wos	WOS:000361384700026
summary	Skin is the primary shield between our body and its surroundings. It protects the body from the harmful environmental effects like dehydration and radiation from intense sunlight. Likewise, the outer layer, or skin of a building has the same function of protecting its inhabitants against the external elements. This research is a part of a larger investigation into geometrical patterning and layering of facades as an effective intervention between the outdoor space and the indoor environment to regulate the conditions for occupant thermal comfort. This paper reports on exploration of an approach for measurement, evaluation and feedback in the design workflow through a mixed digital -physical simulation platform (MDPS) based on the objectives of the larger study. For this purpose, it introduces a new way of analyzing thermal performance of double skin facades by using temperature sensors, Arduino, post visualization with MATLAB and digital energy simulation. The main aspects of this proposed workflow is the design of a thermal performance feedback loop as an integral part of the process of geometrical patterning design for façade.
keywords	Patterned facades; thermal performance; surface temperature; data visualization; mixed digital physical simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	ecaade2014_105
id	ecaade2014_105
authors	Zaid Alwan, Peter Holgate and Paul Jones
year	2014
title	Applying BIM to Sustainable Performance Evaluation in Design Projects: An Educational Approach for Architecture Programmes
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 437-444
doi	https://doi.org/10.52842/conf.ecaade.2014.2.437
wos	WOS:000361385100046
summary	The merits and potential of Building Information Modelling (BIM) have been promoted for several years; however, its widespread adoption and development may potentially stagnate on account of a technical skills shortage, with insufficient personnel having the capabilities to successfully deliver projects. This shortfall covers all aspects of BIM, and building performance and life cycle analysis in particular. Programmes such as Ecotect, Revit, Green Building Studio, and Project Vasari, have transformed data capture and analysis, enabling architects and systems engineers to visualise site analyses and to test preliminary designs. As BIM is a relatively new process which continues to develop rapidly, Higher Education Institutions need to respond to currency and change while striving to provide graduates with the advanced skills to satisfy the needs of the building industry. This work presents a case study of the application of Autodesk's Building Performance Analysis Certificate (BPAC) as a driver for learning in support of the integration of BIM into the architectural curriculum.
keywords	Virtual building performance i; bim collaboration; data transfer; sustainability education
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia14_655
id	acadia14_655
authors	Su, Zhouzhou; Yan, Wei
year	2014
title	Improving Genetic Algorithm for Design Optimization Using Architectural Domain Knowledge
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp.655-660
doi	https://doi.org/10.52842/conf.acadia.2014.655
summary	The paper presents an improved genetic algorithm (GA) for architectural design optimization problems with offline simulation method utilizing specific domain knowledge in architecture. The method is evaluated by a case study of a nursing unit design, for which the objectives are to minimize nurses’ travel distance and maximize daylighting performance in patient rooms.
keywords	design optimization, building simulation, genetic algorithm, offline simulation, computational complexity, walking distance
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2014_066
id	ecaade2014_066
authors	Timo Harboe Nielsen, Stephen Melville and Iain Sproat
year	2014
title	Populating surfaces with holes using particle repulsion based on scalar fields
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 537-545
doi	https://doi.org/10.52842/conf.ecaade.2014.1.537
wos	WOS:000361384700053
summary	This paper describes the relaxation of charged particles in order to create a pattern of voids based on a scalar field on any complex polygon mesh. A scalar field representing stress values or a greyscale image, can be used to create void patterns of aesthetic or structural character; all with full awareness of the materiality. Following relaxation, areas with low scalar values consist of large voids with a small distance between them. Areas of high scalar value consist of small voids with a greater distance between them. This research has been applied in the design of a sculpture at Oxford Brookes University, where stress data from Finite Element Software has been used for the automatic and rational distribution of holes.
keywords	Surface perforation; geometry optimisation; particle repulsion
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2014_230
id	ecaade2014_230
authors	Tsung-Hsien Wang
year	2014
title	Reasoning Spatial Relationships in Building Information Models using Voxels
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 465-471
doi	https://doi.org/10.52842/conf.ecaade.2014.2.465
wos	WOS:000361385100049
summary	This paper investigates a voxel-based approach to automate the space construction of an ill-defined building information model, namely, a building model without specific spatial definitions. The objective is to provide a simplified representation through clustering voxels to reconstruct spaces, with which a spatial topological algorithm is designed to infer the implicit connectivity. This approach is treated as the first step to automate building information exchange for building performance simulation and knowledge-intensive reasoning.
keywords	Building information modelling; voxel; automatic building information exchange; topological spatial relationship
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2017_007
id	ecaade2017_007
authors	Wurzer, Gabriel, Lorenz, Wolfgang E., Cerovsek, Tomo and Martens, Bob
year	2017
title	Contrasting Publications in Design and Scientific Research
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 385-394
doi	https://doi.org/10.52842/conf.ecaade.2017.1.385
summary	This paper explores the differences between 'design' and 'science' papers published at eCAADe conferences through use of automatic classification. The latter is conducted using a set of differentiating criteria (e.g. number of figures determines a paper to be either 'design' or 'science') which are calibrated with the help of a manual selection of papers from eCAADe 2015 as ground truth. Results show that we predict 83% of the papers correctly; experiments using data from eCAADe 2014 until eCAADe 2016 furthermore show the stability of our results. However, we are not so much after the development this automatic classification but rather want to characterize the two research cultures of design and science. This is achieved by taking a close look at the differentiating criteria, which can inform tools such as ProceeDings over possible future directions and adaptation needs.
keywords	Differentiation; Design; Science; ProceeDings; CumInCAD
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2014_014
id	caadria2014_014
authors	Zhong, Chen; Stefan Müller Arisona and Gerhard Schmitt
year	2014
title	A Visual Analytics Framework for Large Transportation Datasets
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 223–232
doi	https://doi.org/10.52842/conf.caadria.2014.223
summary	The advancement of sensor technologies makes it possible to collect large amounts of dynamic urban data. On the other hand, how to store, process, and analyze collected urban data to make them useful becomes a new challenge. To address this issue, this paper proposes a visual analytics framework, which is applied to transportation data to manage and extract information for urban studies. More specifically, the proposed framework has three components: (1) a geographic information system (GIS) based pipeline providing basic data processing functions; (2) a spatial network analysis that is integrated into the pipeline for extracting spatial structure of urban movement; (3) interactive operations allowing the user to explore and view the output data sets at different levels of details. Taking Singapore as a case study area, we use a sample data set from the automatic smart card fare collection system as an input to our prototype tool. The result shows the feasibility of proposed framework and analysis method. To summarize, our work shows the potential of geospatial based visual analytics tools in using ‘big’ data for urban analysis.
keywords	GIS; visual analytics; transportation data; flow map; spatial network analysis
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2014_252
id	caadria2014_252
authors	Erhan, Halil; Andy Huang and Robert F. Woodbury
year	2014
title	DiNa Framework and Prototype to Support Collaboration in the Wild
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 471–480
doi	https://doi.org/10.52842/conf.caadria.2014.471
summary	Much of the available collaboration support tools focus on sharing of documents and managing projects that require planned activities. These tools fall short in meeting principle of least effort or taking into account of the reality of complex work patterns. We propose DiNa framework and system architecture for a topic centric as opposed to document-centric collaboration system using readily available devices. DiNa aims to complement existing approaches. Our primary goal is to seek answers for how these devices can better support collaboration without overloading the workflow. After a literature review and roleplaying exercises, the prototypes we developed demonstrate new interaction techniques for defining topics and address them in collaborators’ own terms. It uses different visualizations of the artefacts and their association with the topics, among which is a scalable timeline interface accessible from different platforms, to make the artefacts collected more meaningful in a given context. In this paper we present our recent prototype as a proof-of-concept and its initial evaluations followed by the lessons learnt from our studies on supporting collaboration in the wild. The evaluation outcome is suggestions for improving DiNa-based systems for effective collaboration.
keywords	Collaboration; collaboration support tools; design; mobile computing; distributed cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2014_002
id	caadria2014_002
authors	Haeusler, M. Hank; Danny Nguyen and Margaret Goldsack
year	2014
title	Ruled Surface Media Facades
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 689–698
doi	https://doi.org/10.52842/conf.caadria.2014.689
summary	Traditionally media facades have been created using 2D surfaces, not dissimilar to televisions. As computational architecture continues to explore non-Euclidian shapes it is a logical process to investigate the use and possibilities of emerging complex curved surfaces for the display of media content to match architectural design aspirations with demands of ubiquitous city concepts of penetrating surfaces with information. Drawing on existing architectural knowledge of ruled surfaces the paper outlines the implementation of adopting existing principles from architecture and mathematics to contemporary discussions in media architecture. It demonstrates that ruled surfaces can function as media facades by simulating ten different ruled surface types in Grasshopper and overlaying them with different video content. Based on the results the team proceeded to build a 1:1 prototype of a hyperbolic paraboloid to test if the simulated results in the computer matched with the physical model. The prototype was further tested using media content to observe the visibility of the display from various viewing positions. Based on the findings the paper concludes that ruled surface media facades are feasible. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	Media facades; responsive architecture; ruled surfaces; non-Euclidian spaces
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2014_316
id	sigradi2014_316
authors	Marqueto, Priscilla Thais; Marcelo Tramontano
year	2014
title	Expressão de pontos de vista e os meios digitais: o uso de graffiti digital e projeção de comentários como ferramentas para obtenção de informações em ações culturais [Expression of viewpoints and The Digital Media]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 72-75
summary	The evaluation of previous research carried out by Nomads.usp - Center of Interactive Living Studies - which used several classical methodological instruments of qualitative research in order to understand urban and social contexts, found limits of these tools when they were employed to encompass nuances related to ways of life, worldviews and viewpoints of surveyed individuals. The aim of this reseach is to verify the limits and the possibilities of using two activities conceived for usage in cultural events with audience’s presence - Digital Graffiti and Comment’s Projection -, in a matter of utilizing it as well as procedures for gathering informations about its audiences by proposing communication processes and dialogs, with the aid of digital media.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ijac201412103
id	ijac201412103
authors	Park, Ju Hong; Takehiko Nagakura
year	2014
title	A Thousand BIM: A rapid value-simulation approach to developing a BIM tool for supporting collaboration during schematic design
source	International Journal of Architectural Computing vol. 12 - no. 1, 47-60
summary	The purpose of this study is to develop a BIM-based plug-in that is able to assist a collaboration among heterogeneous professionals. The tool will enable them to communicate in the same language, articulate criteria and priorities in multiple perspectives, and to share rapidly simulated evaluations of schematic design variations. Among many barriers that block collaborations among professionals, a quintessential barrier in the building and design industries may be epistemological rather than physical. The professionally different ways of thinking, expertise, values, and priorities can be a block on the collaborative development process of architectural design projects. This paper takes the example of the relationship between developers and architects, who tend to have different evaluation criteria. A real-time value simulation tool is introduced as a means to generate possible building typologies on a given project site, with computation of expected total values expressed in simple financial terms.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2014_012
id	ascaad2014_012
authors	Sherbini, Khaled A. and Tarek Hegazy
year	2014
title	An Automated Value-based Evaluation and Conditional Approval of Construction Submittals
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 161-174
summary	To ensure compliance with specifications during construction, a formal review process, called the submittals process, is typically used whereby a contractor submits proposals for materials, equipment, and processes for owner’s approval. This evaluation process can be a difficult task because of time restriction, lack of information in the submittal package, and lack of defined criteria for evaluation. This study thus introduces an automated decision support for submittal evaluation that uses the Multi-Attribute Utility Theory (MAUT) to evaluate a submittal considering its impact on the construction and operation of the building. First, key building submittals are analyzed and the top one (chiller) is selected and its evaluation parameters grouped into two categories: non-flexible and flexible. The non-flexible parameters have been dealt with as a checklist with predefined thresholds that must be met without tolerance. Flexible parameters, on the other hand, have been analyzed using utility values that represent decision makers’ preferences and tolerance levels. Accordingly, the evaluation process determines the overall utility for the submittal and the value-based condition for accepting it. An automated prototype system has been developed using data provided by three organizations through intensive interviews with experts. A case study was then used to prove that the proposed evaluation system provides consistent and objective decisions, internal alignment of organizational values, and improved lifecycle performance of submittal items.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_092
id	ecaade2014_092
authors	Sherif Abdelmohsen
year	2014
title	A BIM-based Framework for Assessing Architectural Competition Entries
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 473-483
doi	https://doi.org/10.52842/conf.ecaade.2014.2.473
wos	WOS:000361385100050
summary	Architectural competitions have been traditionally used to select best design practices. The basis of assessment for competitions has typically involved non-technical concepts of quality, subjective and emotional appreciations of experiences, and inseparable accord of formal, functional, aesthetic and contextual values (Rönn, 2011), rather than clear-cut objective and precisely measured values as in the engineering domain (Nashed, 2005; Nelson, 2006). Criteria for judgment usually focus on design parti and clarity of concept, novelty of architectural approach, context compliance, spatial organization, functional adaptability, economical solutions, and design flexibility. The assessment process, although presumably comprehensive and involving multiple evaluation techniques and resources, may still overlook important technical issues that may be fundamentally significant to the exclusion or approval of a given entry. This paper introduces a framework for assessing architectural competition entries aided by concepts of building information modeling (BIM).
keywords	Building information modeling; architectural competitions; design evaluation; best practices; rule checking
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2014_021
id	ascaad2014_021
authors	Sushant, Verma and Pradeep Devadass
year	2014
title	Adaptive [skins]: Adaptation through smart systems
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 275-289
summary	The project investigates responsive building skin systems that adapt to the dynamic environmental conditions to regulate internal conditions in a habitable space over different periods of time by exhibiting a state of motion and dynamism. Passive and active building skins are developed using shape memory alloys and pneumatic actuators through investigations of smart systems that integrate smart materials and smart geometries. Nitinol springs are integrated in tensegrity systems to actuate the adaptive behaviour, which forms the passive roof system. Owing to the complexity of the multi-parametric system, genetic algorithms are developed for system optimization and calibrated with physical prototypes at varied scales. The developed systems are tested against two distinct climatic models- New Delhi and Barcelona, and evaluated for performance, based on heat and light, which are quantified as solar gain and illuminance as principles, and daylight factor for evaluation purpose. New tool-sets are developed in the process by combining various digital tools, to create a real-time feedback and memory loop system.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_089
id	ecaade2014_089
authors	Sven Schneider, Martin Bielik, Dirk Donath, Michel Triemer, Julia Tschetwertak and Alexander Hollberg
year	2014
title	Rapid Data Collection using Automated Model Generation and Performance Evaluation - A workflow for morphological studies of apartment floor plans
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 303-311
doi	https://doi.org/10.52842/conf.ecaade.2014.2.303
wos	WOS:000361385100032
summary	In this paper we propose a framework for accelerating the process of data-collection from apartment floor plans. After describing the general workflow and the criteria used for performance evaluation, we present a tool for automated model generation and evaluation. To demonstrate the functionality of this workflow we show examples, based on a preliminary test phase undertaken in a seminar for master students.
keywords	Data collection; apartment floor plans; space syntax; automated model generation, automated performance evaluation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2014_105
id	caadria2014_105
authors	Takeda, Hiroyuki; Yoshinori Kurashige, Keishiro Hara and Atsuko Kaga
year	2014
title	Methodology of City Analysis for Evaluating Compactness Using GIS
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 243–252
doi	https://doi.org/10.52842/conf.caadria.2014.243
summary	A method to evaluate convenience for daily life focusing on proximity and accessibility is proposed. First, a set of indicators related to convenience for daily life was developed, and comprehensive evaluation on physical environments of a city was conducted by utilizing GIS, statistical, and other surveyed data. Then, a proposed evaluation procedure with a weighting method using the age categories of residents was applied to clarify the areas that could attain high convenience. Additionally, the change of convenience associated with the change in future demographic characteristics was examined based on the estimated population and demographic characteristics in 2040. Potential "cores" were identified that can efficiently enhance the force of centralization needed for realization of a compact city. It was also suggested that the evaluation method developed in this research can be used as a tool to address and realize sustainability in cities.
keywords	City analysis; compact city; GIS; big data
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2014_220
id	ecaade2014_220
authors	Tijjani Zubairu, Sevil Sariyildiz and Ozer Ciftcioglu
year	2014
title	Assessment of Building Performance Using Computational Intelligence: Focus on the Disabled and Elderly
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 217-225
doi	https://doi.org/10.52842/conf.ecaade.2014.2.217
wos	WOS:000361385100023
summary	The care for the elderly and people with disability increasingly demand more ingenuity to undertake, especially as it relates to the built environment. The impact of the physical environment on health has been widely documented. The knowledge of the special needs/preferences of this vulnerable group of users (people suffering from Alzheimer, autism, dementia and other similar disabilities), for the purpose building of performance evaluation and subsequent improvements is essential. The challenge is that their conditions, as exemplified by the loss or impairment of their capacity to provide accurate/realistic information of their building attributes' perceptions and preferences, make such knowledge inaccurate to serve as basis for building improvements and designs. This paper seeks to provide a scientific means for obtaining more accurate knowledge, which when obtained normally can be misleading and non representational of reality. The method adopted for this study is fuzzy-neural-network computation, a branch of computational intelligence, to develop an all-encompassing knowledge based building performance assessment model.
keywords	Building-performance-assessment; elderly; fuzzy-neural-network
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2014_254
id	caadria2014_254
authors	Tuker, Cetin and Halil Erhan
year	2014
title	An Architectural Modeling Method for Game Environments and Visualization
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 605–614
doi	https://doi.org/10.52842/conf.caadria.2014.605
summary	Modeling 3D architectural environments for games and design visualization is different than modelling for other purposes, such as for construction. These models include only the outer surfaces as ‘skin’ structures of the facades for rendering for which existing tools are too complex. After interviewing fourteen domain experts and evaluating available modelling tools, we observed a need for new modelling methods for rapid visualizations that leaves redundant model parts out for efficiency. We have developed a surface modelling method and a formalism for modelling architectural environments by slicing a building into layers with strips of façade element sequences. In the first prototype, we focused on parametric structures using userdefined architectonic vocabulary such as voids and solids. We conducted an expert review study with four participants: two user-experience and two domain experts. All participants responded that the method is easy to learn even for non-experts. Based on the tasks completed, they agreed that the method can speed the process of modelling large continuous façades, single-mass single-storey geometries, and repetitive floor layers; they also made suggestions for improvement. The results from the initial evaluation show that the method presented has some merits to be used in practice.
keywords	3D modelling; facade reconstruction; game; visualization
series	CAADRIA
email
last changed	2022/06/07 07:57

For more results click below: