Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 577

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ascaad2014_013
id	ascaad2014_013
authors	Binhomaid, Omar and Tarek Hegazy
year	2014
title	Comparison between Genetic Optimization and Heuristic Methods for Prioritizing Infrastructure Rehabilitation Programs
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 175-182
summary	In recent years, infrastructure rehabilitation has been in the focus of attention in North America and around the world. A large percentage of existing infrastructure assets is deteriorating due to harsh environmental conditions, insufficient capacity, and age. Due to stringent budget limits, however, asset management systems become important to assess the life cycle performance of various assets, and accordingly prioritize the assets for rehabilitation purposes. While many asset management systems have been introduced in the literature, almost no studies have compared the effectiveness of their asset prioritization methods. This paper presents an extensive comparison between heuristic and optimization methods for prioritizing large-scale rehabilitation programs, under budget constraints. The paper first introduces different life cycle cost analysis (LCCA) formulations for three case studies obtained from the literature related to buildings, pavements, and bridges. Based on extensive experiments with the three case studies and on different network sizes, heuristic techniques proved its practicality for handling various network sizes. The performance of genetic optimization, on the other hand, was more efficient on small-scale networks but showed steep degradation in performance with large-scale problems. This research can be beneficial to municipalities and asset managers and can help them design efficient methods to sustain the safety and operability of the civil infrastructure, with least cost.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2014_088
id	caadria2014_088
authors	Puusepp, Renee
year	2014
title	Spatial Agglomerates
doi	https://doi.org/10.52842/conf.caadria.2014.585
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 585–594
summary	This paper reports on the computational modelling research investigating spatial organisations often associated with unplanned settlements. Such spatial agglomerates are composed of several co-located but autonomous units (agents) that share common facilities and infrastructure (e.g. circulation). Depending on the context, units in the agglomerate represent individual dwellings, apartments or abstract spatial geometry. The paper presents early prototype models that can be interpreted at various scale, and a computational model for generating organic settlement layouts. The originality of the research resides within a new multi-agent algorithm for creating spatial organisations. The agglomeration process benefits from two distinct generative design strategies – self-organisation and adaptive development strategy. While the self-organisation accounts for the emergence of the global structure in the agglomeration, the adaptive development strategy ensures that the basic environmental and spatial requirements of each individual unit are satisfied.
keywords	Generative design; agent based modelling; object oriented design; unplanned settlements
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac201412408
id	ijac201412408
authors	Bueno, Ernesto and Benamy Turkienicz
year	2014
title	Supporting Tools for Early Stages of Architectural Design
source	International Journal of Architectural Computing vol. 12 - no. 4, 495-512
summary	In architectural design, pencil and paper remain the most frequently used media to create freehand drawings to support early design stages. Digital tools conventionally used by architects lack appropriate functionalities and do not offer friendly interfaces for the early stages of architectural design.These are the bad news.The good news are twofold: a) hardware already available can help freehand designers todigitally express their first ideas; and b) functionality principles present in experimental software combined with appropriate hardware could successfully provide a friendly and intuitive human-computer interaction in the early stages of architectural design.This paper takes special attention to the way architects interact with computers, how input devices constrain possible interactions and how functionalities can be explored through these interactions.The article summarizes basic principles to be considered in the development of an all-in-one software and create a scenario whereby these principles are simulated on a hypothetical software to be used during the early stages of architectural design.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2014_165
id	sigradi2014_165
authors	Rossado Espinoza, Verónica Paola
year	2014
title	Desafíos en la enseñanza del diseño arquitectónico creativo: estrategias para desarrollar la creatividad del estudiante con el uso de las TIC [Teaching challenges in creative architectural design: strategies to develop students’ creativity with ICT]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 227-230
summary	Creativity can be reflected in different aspects of daily life, the new ideas will be based on several conditions. However Information, Technology and Communications (ICT) provide new creative alternatives to design. The subject of creativity is understood as a challenge of teaching; where process and creative thinking are linked with ICT and have an important role in the project development. ICT introduce different factors as, networks, information and scientific advances, improving the level of thinking in design. Teachers should encourage students to put into action their inventiveness and collaboration to increase their creativity level.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	caadria2014_256
id	caadria2014_256
authors	Senske, Nicholas
year	2014
title	Digital Minds, Materials, and Ethics: Linking Computational Thinking and Digital Craft
doi	https://doi.org/10.52842/conf.caadria.2014.831
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 831–840
summary	This paper describes the connections between computational thinking and digital craft, and proposes several ways that architectural education can cultivate better digital craft, specifically: motivating the use of computational strategies, encouraging a conceptual understanding of computing as a medium, teaching computer programming, and discussing digital ethics. For the most part, these subjects are not widely taught in architecture schools. However, moving forward, if the profession values good design, it must also value good digital craft, and ought to instil a way of working in the next generation of architects that makes the most of both the computer and the designer. Computational thinking provides a common foundation for defining and instilling this critical mindset and, therefore, deserves greater consideration within architectural pedagogy.
keywords	Digital craft; computational thinking; ethics
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac201412406
id	ijac201412406
authors	Teixeira Mendes, Leticia; Gabriela Celani and José Nuno Beirao
year	2014
title	Meta-PREVI Grammar
source	International Journal of Architectural Computing vol. 12 - no. 4, 459-476
summary	This paper describes part of a wider research that aimed at using Shape Grammar to generate more diverse and interesting urban spaces in Brazilian Social Housing developments.A shape grammar corresponding to design patterns was inferred from the PREVI Lima urban plan developed by C.Alexander [1] in the 1970s.The grammar was inferred from the plan layout and from the text instructions (or pattern descriptions) presented by Alexander, and can be applied to design new plans within a wider formal universe than what the plan layout would suggest.The final section of the paper points towards the development of generic grammars as a way of encapsulating good qualities of certain design projects and applying them to new situations.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2014_339
id	sigradi2014_339
authors	Arenas Bahamondes, Felipe Ignacio; Claudio Andrés Fredes Osses
year	2014
title	Principios de diseño de juegos ubicuos: Modelo para la implementación de juegos de infraestructura multimedial en espacios aumentados [Design principles of ubiquitous games: A model for implementing games of multimedia infrastructure in augmented spaces]
source	siGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 450-454
summary	This research aims to build a method for making ubiquitous games using urban screens. It explores the boundaries between the fields of architecture, new media art and design, describing a theoretical framework that illustrates the potentials of designing game systems in the public space as well as the benefits that include the use of public screens to construct social interaction. Through the analysis and interpretation of several case studies we were able to determine the key aspects that designers should consider developing this kind of projects.
keywords	Ubiquitous games; Augmented spaces; Urban screens; Public space; Active citizenship
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_132
id	ecaade2014_132
authors	Eiman Y. ElBanhawy, Ruth Dalton and Emine Mine Thompson
year	2014
title	Interrogating the Relation between E-Mobility Recharging Network Design and Drivers' Charging Behaviour
doi	https://doi.org/10.52842/conf.ecaade.2014.1.213
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 213-224
summary	In this article we report on research into patterns of electric vehicle (EV) commuters' movement and behavior in a road network. The design of the charging network is a function of its size and the distribution of the charging points. It consists of several spatial design qualities, configuration attributes, travel demand, and users charging patterns. This study introduces the spatial configuration of an active e-mobility system through a case study. The article investigates the correlation between the design characteristics of EV recharging infrastructure and its usability. We need to explore the variations in individual charging behavior within the EV population to understand the movement patterns in the network. Using data of over 500 EV drivers charging their cars using Recharging facilities (RFs) over a three-year time, we clustered the EV population based on the charging patterns. Design configuration analysis is conducted using DepthMap; charging patterns are captured by the infrastructure service provider.
wos	WOS:000361384700021
keywords	Electric vehicles; charging behaviour; recharging facilities; space syntax
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2014_096
id	caadria2014_096
authors	Grobman, Yasha and Roy Kozlovsky
year	2014
title	On the Shores of Architecture
doi	https://doi.org/10.52842/conf.caadria.2014.853
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 853–862
summary	This paper explores the implications of complex geometry enabled by computational technology to architectural theory and practice. It reviews the different design paradigms engaged breaking the horizontality of the floor and ceiling or fusing them together. It argues that current advances in fluid dynamics simulations open a new frontier in the conception of the usable architectural surface, in which the architectural product is no longer a fixed object, but the interaction between a fluid, changing environment and built form. The paper presents a case study in which computational fluid dynamics are utilized to reconvert a disused breakwater into a ‘blue garden’. The morphology of the breakwater and its texture are calculated to produce the conditions amiable for supporting a varied marine ecosystem, and to shape the waves to generate aesthetically meaningful sensations. The essay discusses the technical and conceptual challenges of controlling the nonlinear behaviour of fluids. It then speculates on the theoretical ramifications of having the surface interact with exterior forces and the subject's imagination to produce an event enfolding in time.
keywords	Computational fluid dynamics; curvilinear surfaces; performance design theory; habitat engineering; coastal infrastructure
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia14_153
id	acadia14_153
authors	Lopez, Rodrigo Shiordia; Gerber, David
year	2014
title	Context-Aware Multi-Agent Systems: Negotiating Intensive Fields
doi	https://doi.org/10.52842/conf.acadia.2014.153
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 153-162
summary	This paper presents research and experimentation with context-aware multi-agent based design systems to simulate and propose urban schemes that specifically utilize fields of differentiated intensity data in order to propose an infrastructure to support urban revitalization
keywords	Parametric Design, Generative Design, Multidisciplinary Design Optimization (MDO), Multi-Agent Systems, Autonomous Systems, Regenerative Urbanism
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:59

_id	acadia14projects_143
id	acadia14projects_143
authors	Robinson, Alexander
year	2014
title	Calibrating Agencies in a Territoy of Instrumentality
doi	https://doi.org/10.52842/conf.acadia.2014.143
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 143-146
summary	Exhibited is an interactive landscape player and public outreach tool for robotically sand modeled and vacuum formed designs for dust control mitigation landscapes for the Owens Lake in Lone Pine, California. This system engages users and stakeholders with the tools and products of a digitally augmented rapid landscape prototyping machine built to create agency for multiple values in the design of dust control infrastructure for the dry lake.
keywords	Robotics and Autonomous Design Systems, Simulation + Intuition, Material Logics and Tectonics, Multidisciplinary Design Optimization, User participation in design, Virtual/augmented reality and interactive environments
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

_id	sigradi2014_345
id	sigradi2014_345
authors	Shiordia Lopez, Rodrigo; Dr. David Jason Gerber
year	2014
title	Context-Aware Multi-Agent Systems: Negotiating Intensive Fields
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 138-143
summary	This paper presents research into a technique using context-aware agent based branching L-systems to design explore an urban development scheme in an area of peripheral Mexico City. The design research demonstrates a viable approach to engaging design with specific agent driven objectives that negotiate across highly differentiated fields of data sets. These data sets are the driving force behind this technique, to generate highly differentiated infrastructure and urban networks that are simulated to be autonomous and emergent. The described system consists of simulated robotic autonomous agents that sample and negotiate across data from the site, and react to differences in order to deploy an irrigation network for a polluted and highly saline former lake-bed east of Mexico City.
keywords	Multi-Agent Systems; L-Systems; Generative Urban Design; Multi-Objective Optimization: Design Agency
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2014_151
id	ecaade2014_151
authors	Zeta (Georgia) Kachri and Sean Hanna
year	2014
title	Parasitic Ecologies - Algorithmic Space through Diffusion-Limited Aggregation of Truncated Octahedrons
doi	https://doi.org/10.52842/conf.ecaade.2014.2.539
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 539-546
summary	Parasitic architecture allows the creation of flexible structures that feed off existing infrastructure. Additionally, self-organised models that grow in response to environmental forces and adapt to their context introduce new ways for intervening in architectural design. This paper investigates the properties of self-organised parasitic structures that evolve by creating aggregation forms in the context of simulated structural environments. The growth process of the parasitic structures is inspired by the fungal colonies and is based on the rules of diffusion-limited aggregation (DLA) extended to support real-time force analysis and aggregation of space-filling geometry. The results of the simulations demonstrate that the developed diffusion-limited aggregation of truncated octahedrons is capable of providing self-sustained structures able to adapt in environments with different spatial limitations.
wos	WOS:000361385100056
keywords	Adaptive structural models; parasitic architecture; diffusion-limited aggregation; self-organisation, java
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_014
id	ascaad2014_014
authors	Abuelmaatti, Aisha A.; Vian S. Ahmed and Heveine S. Baban
year	2014
title	Collaborative Environments in Small and Medium-sized Enterprises in Architecture, Engineering and Construction
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 183-193
summary	The general picture of Architecture Engineering and Construction (AEC) is of a sector that is a pyramid with control being in the hands of large players with a large base of Small and Medium Enterprises (SMEs). It ensues naturally that SMEs are key players in supporting the large companies. This suggests that, the AEC sector has a continuous demand for collaboration. Collaborative working has been implemented in numerous companies. These efforts have resulted in the wide recognition of the opportunity that emerging technologies offer the AEC sector. It is, however, commonly observed that SMEs are likely to magnify the sector trend and to be less technically forward thinking than large companies. The main focus of this paper is, therefore, to explore the use of IT within AEC, and the barriers and different implementation factors that can influence SMEs to develop, in response to business pressures using the opportunities provided by collaborative technologies.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_479
id	acadia14_479
authors	Achten, Henri
year	2014
title	One and Many: An Agent Perspective on Interactive Architecture
doi	https://doi.org/10.52842/conf.acadia.2014.479
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 479-486
summary	Agent theory from Distributed Artificial Intelligence can form a strong theoretical foundation for the conception and following the design of interactive architecture. New concepts are introduced: style of interaction and attitude. For design support they can be unified under the notion of intentionality.
keywords	Interactive Architecture, Interaction Style, Building Attitude, Multi Agent Systems in Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: