Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 394

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2014_032
id	ascaad2014_032
authors	Merzougui, Abdelkrim; Abdelmalek Hasseine; Djemoui Laiadi; Sadouk Houda and Jamel Chaouki
year	2014
title	A CFD Analysis of the Urban Morphology Effect on Air Pollutants Dispersion
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 395-403
summary	Air pollution in urban environments can have negative consequences on people's health and comfort of city-dwellers, and on the durability of buildings. Understanding the transfer and deposition of pollutants in the urban environment is therefore essential in the design process of a building. Computational simulations can aid in understanding the pollutant/chemical dispersion in the urban cityscapes. Computational fluid dynamics (CFD) represents the study of fluid mechanics with the use of computer models and simulations. In this paper we study the impact of urban planning on pollution dispersion, the dispersion characteristics, such as the spread of the pollution dispersions, have been determined for different wind speeds and wind directions.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_086
id	ecaade2014_086
authors	Ahmed Sarhan and Peter Rutherford
year	2014
title	Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
doi	https://doi.org/10.52842/conf.ecaade.2014.1.323
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
summary	The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
wos	WOS:000361384700032
keywords	Environmental design; building performance simulation; architectural design education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_037
id	ascaad2014_037
authors	Al-Tuhafi, Assda A. and Nasma M. Thabit
year	2014
title	The Methodology of Teaching Computer-Aided Architectural Design in the Department of Architecture in Mosul University
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 271; 457-469
summary	Several architectural studies tackled the methodologies of teaching the architectural design subject in general and their relation to the use of computer in particular. The trends varied in accordance with the research that is relevant to the subject due to its importance in generating new architectural models, but it didn’t crystallize a theoretical framework that identifies clear and specific vocabularies related to the methodology of teaching the computer-aided architectural design. The current study discusses the importance of this concept in an attempt to explore the particular problem represented by the non-clarity of this methodology in the department of architecture in Mosul University. Therefore, the problem of the research crystallized and its objective and its methodology were identified and this was represented by constructing a theoretical framework which includes several main items. Then the theoretical framework was applied to selected projects of architectural department students in order to manifest the particularity of teaching the computer-aided architectural design. Results showed the distinction of this department as this methodology led to the derivation of different architectural products in accordance with the particular effects using the computer technologies. The results also manifested the change in the architectural design trend that was caused due to the digital intervention in the way of the student's thinking from one hand and the components and the elements of the building from the other hand that the quality of the design can be improved by using the computer and the quantity will be more in shorter time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	sigradi2014_155
id	sigradi2014_155
authors	Andrade, Max; Cristina Matsunaga
year	2014
title	Avaliação Automática de Valor no Processo de Projeto de Habitação de Interesse Social no Brasi [Alignment Automated Assessment of Value in Brazilian’s Housing Design]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 393-397
summary	The method proposed in this paper addresses the management of values and the cost estimate, based on target costing approach, and integrated with Building Information Model (BIM). This design method must incorporate mechanisms of automated assessment associated with desired value at cost during the design process. The paper will try to show, in brief, that there is a real possibility of inclusion of methodological tools of design, allowing assessment of values in real time during the design actions.
keywords	Building Information Modeling; Desired value; Automatic Assessment; Target Costing
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_133
id	ecaade2014_133
authors	Armando Trento, Antonio Fioravanti and Francesco Rossini
year	2014
title	Health and Safety Design by means of a Systemic Approach - Linking Construction Entities and Activities for Hazard Prevention
doi	https://doi.org/10.52842/conf.ecaade.2014.1.633
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 633-642
summary	Education and Research in Computer Aided Architectural Design in Europe faces many urgent tasks. Among the Architecture, Engineering and Construction (AEC)international scientific societies, only few researches systematically investigate on how to integrate the design solutions with Health and Safety (HS) planning measures, enhancing a collaborative “fusion” of all involved actors in Design and Construction decision making. Process automation cannot be enhanced until design/management tools, such as Building Information Models, can rely only on entities formalised "per se" geometrical items fulfilled by isolated-object specific information. To face complex problems, BIM models should be able to implement and manipulate multiple sets of entities, qualified by clearly established relationships, belonging to organically structured and oriented (sub-) systems. This paper reports on an early stage research project, focused on the identification of operative rules for Health and Safety design. Implementation on the unique case study of Palazzo della Civiltà Italiana functional refurbishment faces two main objectives: one, more pragmatic, is concerned with boostingworkers education about non-standard operative tasks, by means of accurate ad-hoc construction narrative visualisation; another one, more challenging and theoretically complex, consists in modelling "judgment-based" rules, aimed at supporting automated reasoning in Safety Design.
wos	WOS:000361384700063
keywords	Construction hazards prevention through design; project construction management and visualization; health and safety management; risk modelling; knowledge representation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_145
id	caadria2014_145
authors	Aydin, Serdar and Marc Aurel Schnabel
year	2014
title	A Survey on the Visual Communication Skills of BIM Tools
doi	https://doi.org/10.52842/conf.caadria.2014.337
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 337–346
summary	Building Information Modelling (BIM) applications are supported by various modelling tools, being expansive to deliver visualised geometry and databases simultaneously. But there is still a gap in visual communication amongst its professionals. Articulating the advantages of fully Web-based collaboration, this paper looks into how BIM tools make contribution to visual communication between different parties working collaboratively. A hybrid model of low-level and high-level interactions is tentatively conceptualised. Based on the hybridised model, a survey is conducted to elucidate a few experiential matters such as visual aesthetics, cognition and motivational impacts of visualisation in BIM tools. Following the survey, a discussion is oriented towards a new storytelling methodology with a novel term, namely gamification. Seeking motivating and efficient means of visual communication between human-human, human-tool and human-model interactions, the present study focuses on an enhanced legibility and appreciation of tools by those who are involved in BIM projects.
keywords	Narrative visualisation; infinite computing; information aesthetics; gamification; hybrid model of interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_178
id	sigradi2014_178
authors	Baltazar, Ana Paula; Filipe Silva Gonçalves, Mateus Moreira Pontes, Emidio Dias Maciel e Souza, Luiza Silva Metzker
year	2014
title	Ambiente de imersão virtual como ferramenta para mudança de paradigma no processo de projeto arquitetônico: da representação à interação [Virtual immersive environment as a tool for paradigm shift in architecturaldesign process: from representation to interaction]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 551-555
summary	This paper discusses the possibility of a low-cost immersive virtual environment (AIVITS) shifting the paradigm from representation to interaction in architecture design process. It first presents the perspectival paradigm in architecture, initiated in the Renaissance and culminating with the separation between design, building and use, having representation as its main product. Then it discusses the possibility of having representation as a tool, no longer as a paradigm, in a design process based on interaction. It then presents the interface used in the low-cost immersive virtual environment, which instead of representing the final appearance of the building, stimulates people to play with constructive possibilities by means of gestures.
keywords	Immersive environment; Virtual reality; Representation; Interaction; Stereoscopy
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_180
id	sigradi2014_180
authors	Bernardo, Marcus Vinicius Fernandes Rocha; Jose dos Santos Cabral Filho Correo
year	2014
title	Fabricação digital e variedade fora do contexto industrial
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 320-323
summary	This paper discusses issues raised during an experiment about the use of digital fabrication technologies in non-industrial contexts in three concurrent fronts: The first front was to get familiarized with the production ecology of a non-industrial building context, the favela. The second front was to verify the accessibility of digital fabrication technologies outside the industry by building a low cost CNC milling machine based on DIY instructions available in the internet. And the last front was to develop useful solutions with this technology to that context. Partial results are guidelines for improving the technology in order to fit the context
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia14_333
id	acadia14_333
authors	Briscoe, Danelle
year	2014
title	Parametric Planting: Green Wall System Research + Design using BIM
doi	https://doi.org/10.52842/conf.acadia.2014.333
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 333-338
summary	Parametric planning and planting methodologies challenge the capabilities of Building Information Modelling (BIM) as a design tool; experimenting with alternative file types along with visualization from a Autodesk Revit Material Editor and visual programming plug-in Dynamo workflow.
keywords	BIM, parametric, landscape, bio-wall, component, collaboration
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia14projects_201
id	acadia14projects_201
authors	Burger, Shane
year	2014
title	South Australian Health and Medical Research Institute (Sahmri)
doi	https://doi.org/10.52842/conf.acadia.2014.201
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 201-204
summary	An outline of the workflow used on the SAHMRI project from design through to fabrication and assembly. SAHMRI, which opened in 2014, features a doubly-curved glass and metal facade with exterior solar fins for shading.
keywords	Building Information Modelling, Digital Fabrication and Construction, Computational design analysis
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:54

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14projects_55
id	acadia14projects_55
authors	Carlow, Jason
year	2014
title	Parametric Façade Systems: Performance-Driven design for ultra-thin buildings in Hong Kong
doi	https://doi.org/10.52842/conf.acadia.2014.055
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 55-58
summary	Through design research, analysis and modeling, the project seeks to distort the standardizing forces of building code limitations, economic concerns and mass production on the built environment. The project presents a proposal for an extremely thin building type that features a more responsive, better integrated façade developed with parametric design tools.
keywords	Parametric Design, Pre-fabrication, Façade Systems, Digital Fabrication, Linear Domesticity, Building Code
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

_id	caadria2014_142
id	caadria2014_142
authors	Chandra, Daniels and Ning Zhou
year	2014
title	BIM Add-on Tool for Automated CUI Calculation
doi	https://doi.org/10.52842/conf.caadria.2014.305
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 305–314
summary	The Building and Construction Authority (BCA) of Singapore established Sustainable Construction Master Plan with the goal of achieving a Sustainable Singapore Blueprint. The Concrete Usage Index (CUI) is a part of Sustainable Construction scoring under Singapore’s ‘Green Mark’ system. Since computation of CUI score was formerly calculated manually without the use of BIM software, it was an inaccurate and tedious process. Although calculation of CUI is currently much faster through the use of BIM software, it still faces challenges. The objective of this project is to address those challenges by creating a BIM addon tool which is capable of automating the process of CUI calculation with minimum user input. Our intention is to help the industry to calculate CUI systematically and efficiently while promoting the adoption of BIM.
keywords	CUI; Concrete Usage Index; BIM; Green Mark; sustainable design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac201412105
id	ijac201412105
authors	Choo, Thian-Siong; Patrick Janssen
year	2014
title	Evolutionary Optimisation of Semitransparent Building Integrated Photovoltaic Facades
source	International Journal of Architectural Computing vol. 12 - no. 1, 81-100
summary	The optimisation of semi-transparent building integrated photovoltaic facades can be challenging when attempting to find an overall balance performance between conflicting performance criteria. This paper presents a three-phase design optimisation method that maximises overall electricity savings generated by these types of facades by simulating the combined impact of electricity generation, cooling load, and daylight autonomy. Two demonstrations are performed, with the difference being that the second demonstration uses an enhanced model for calculating daylight savings that takes into account the use of blinds to counteract glare. For both demonstrations, the three-phase optimisation method significantly reduces optimisation run times. Comparing the design variants evolved by the two demonstrations, the use of the enhanced daylight savings model results in a total electricity savings that is more accurate but in terms of visual differentiation, the difference between the optimized design variants is relatively small.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2014_065
id	ecaade2014_065
authors	Daniel Prohasky, Rafael Moya Castro, Simon Watkins, Jane Burry and Mark Burry
year	2014
title	Wind sensing with real-time visualisations for Designers - An approach to understanding wind phenomena for pedestrian comfort using low cost wind sensors
doi	https://doi.org/10.52842/conf.ecaade.2014.1.165
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 165-171
summary	The evaluation of a low-tech wind sensing platform for urban aerodynamic simulations relevant to pedestrian comfort. In this paper, the wind canyon effect is simulated with two different building morphologies. The platform provides conceptual knowledge of the dynamics in wind relevant for designers, architectural practitioners and students of design. Low-cost hot wire anemometry is utilised for the design of an Experimental Fluid Dynamic (EFD) wind sensing network interface. This paper explores the validity of the sensing platform for a new approach for non-wind engineers to gain a better understanding of the dynamics of wind. The influence of real-time feedback from quantified wind on the understanding of wind phenomena for non-wind engineers is discussed and compared with post analysis data. It was found that real-time quantified feedback from wind intrigues and stimulates the intuitive notion of wind dynamics through discussion, however post analysis remains critical to evaluate building design performance.
wos	WOS:000361384700016
keywords	Wind sensing; real-time feedback; experimental fluid dynamics; hot-wire anemometry; atmospheric boundary layer
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2014_082
id	sigradi2014_082
authors	De Martino, Jarryer Andrade; Gabriela Celani
year	2014
title	Definição volumétrica a partir de um sistema generativo evolutivo [Volumetric Definition from an Evolutionary Generative System]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 384-388
summary	The objective of this paper is to present the volumetric modeling of a building through an evolutionary generative system, using weather information site. The methodology explored three experiments with two different approaches, one partially and one fully parameterized, obtaining results that directed the modeling process. The paper makes a brief theoretical introduction to the bioclimatic architecture, the description of the method used and the analysis of results.
keywords	Evolutionary algorithms; Generative system; Optimization; Creative process; Insolation
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: