Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 49

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2014_086
id	ecaade2014_086
authors	Ahmed Sarhan and Peter Rutherford
year	2014
title	Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
doi	https://doi.org/10.52842/conf.ecaade.2014.1.323
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
summary	The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
wos	WOS:000361384700032
keywords	Environmental design; building performance simulation; architectural design education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_055
id	ecaade2014_055
authors	Ahmet Emre Dincer, Gülen Cagdas and Hakan Tong
year	2014
title	A Digital Tool for Customized Mass Housing Design
doi	https://doi.org/10.52842/conf.ecaade.2014.1.201
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 201-211
summary	Innovative design approaches are needed for mass housing implementations. Especially increasing interaction between user and designer is major important in the design decisions of these buildings. For this, it is seriously necessary to benefit from technological advances in computational designs, because digital tools like shape grammar, cellular automata, genetic algorithm, l-systems and agent-based models in this field provide not only to save time and to manage the relationships but also to generate many different alternatives. Accordingly, a digital support tool for designers has been developed by using cellular automata approach and scripts of 3Ds Max software. It produces samples of housing design plans which is generated by cellular automata approach according to the data of users' preferences. In this paper the interface and contributions of the developed model are introduced and discussed.
wos	WOS:000361384700020
keywords	Computational design; mass customization; innovative housing design; plugin
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_035
id	ascaad2014_035
authors	Al-Kazzaz, Dhuha A. and Assda A. Al-Tuhafi
year	2014
title	Using Genetic Algorithms for the Generation of New Designs Derived from Islamic Schools Plans
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 119; 431-442
summary	Historic buildings are fruitful sources of architectural concepts which can be used to generate new designs characterized by authenticity and originality. Design computing methods have used varied techniques of knowledge representation in deriving new designs from architectural precedents such as: case-based design and genetic algorithms. This research has adopted genetic algorithms, a simulation of biological evolution to generate new plans from old ones belonging to the Islamic historical schools. The implemented method represents architectural knowledge in a simple schema (chromosome) and allows it to be modified easily using crossover operation to generate new plans with high fitness value. The research considered the fitness function as a measure of differences among the design characteristics of the sample of the Islamic schools. The results show the effectiveness of genetic algorithms in both analyzing past precedents and synthesizing their characteristics to produce new designs.
series	ASCAAD
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ascaad2014_006
id	ascaad2014_006
authors	Badrani, Hayet and Bernard Duprat
year	2014
title	Analysis of Produced Form and Innovation in Architectural Design
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 85-97
summary	This paper is about the analysis of architectural objects; it follows and compares the form’s variation. In fact, a collection of buildings can be characterized by the morphology decomposition or the morphometric treatment. Operating method is put in place to study the possible arrangements of the basic components according to morphotic structures and predefined relations. Based on the questions about the produced form, this method promotes a creative situation; it can support and help teaching innovation in the field of architectural design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_149
id	sigradi2014_149
authors	Baisch, Lucas Figueiredo; Luis Gustavo Gonçalves Costa Correo
year	2014
title	Pepakura e Educação Patrimonial: Construção de Modelos de Edificações Históricas da Cidade de Salvador [Pepakura and Heritage Education: Salvador City Historical Buildings Model Construction]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 471-474
summary	The Heritage Education is a way of approaching the historical architecture of their communities of students. Through playfulness, it is possible to explore new forms of human cognition to arouse interest and curiosity in their own history and identity. In this research, it is proposed that the planning of the São Francisco de Assis Church in Salvador, Bahia, Brazil, for the assembly of your model for primary school students. For this, SketchUp® software for modeling, Pepakura Designer® for planning and AutoCAD® for finalization and printing are used.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2014_170
id	caadria2014_170
authors	Beirão, José Nuno; André Chaszar and Ljiljana _avi_
year	2014
title	Convex- and Solid-Void Models for Analysis and Classification of Public Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.253
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 253–262
summary	In this paper a semiautomated morphological classification of urban space is addressed systematically by sorting through the volumetric shapes of public spaces represented as 3-dimensional convex and solid voids. The motivation of this approach comes from a frequent criticism of space syntax methods for lacking information on how buildings and terrain morphology influence the perception and use of public spaces in general and streets in particular. To solve this problem information on how façades relate with streets and especially information about the facades’ height should be considered essential to produce a richer and more accurate morphological analysis of street canyons and other open spaces. Parametric modelling of convex voids broadens the hitherto known concept of two-dimensional convex spaces considering surrounding facades’ height and topography as important inputs for volumetric representation of urban space. The method explores the analytic potentials of ‘convex voids’ and ‘solid voids’ in describing characteristics of open public spaces such as containment, openness, enclosure, and perceived enclosure, and using these metrics to analyse and classify urban open spaces.
keywords	Open public space; convex voids; solid voids; user-guided feature recognition
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_013
id	ascaad2014_013
authors	Binhomaid, Omar and Tarek Hegazy
year	2014
title	Comparison between Genetic Optimization and Heuristic Methods for Prioritizing Infrastructure Rehabilitation Programs
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 175-182
summary	In recent years, infrastructure rehabilitation has been in the focus of attention in North America and around the world. A large percentage of existing infrastructure assets is deteriorating due to harsh environmental conditions, insufficient capacity, and age. Due to stringent budget limits, however, asset management systems become important to assess the life cycle performance of various assets, and accordingly prioritize the assets for rehabilitation purposes. While many asset management systems have been introduced in the literature, almost no studies have compared the effectiveness of their asset prioritization methods. This paper presents an extensive comparison between heuristic and optimization methods for prioritizing large-scale rehabilitation programs, under budget constraints. The paper first introduces different life cycle cost analysis (LCCA) formulations for three case studies obtained from the literature related to buildings, pavements, and bridges. Based on extensive experiments with the three case studies and on different network sizes, heuristic techniques proved its practicality for handling various network sizes. The performance of genetic optimization, on the other hand, was more efficient on small-scale networks but showed steep degradation in performance with large-scale problems. This research can be beneficial to municipalities and asset managers and can help them design efficient methods to sustain the safety and operability of the civil infrastructure, with least cost.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2023_438
id	sigradi2023_438
authors	Braz Barcellos, Daniel, Lucena de Assis Bezerra, Giulia Fernanda and Oukawa, Ana Carolina
year	2023
title	Impacts on the landscape coast of Joao Pessoa-PB: an analysis based on digital simulations
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1809–1820
summary	The research analyzes the impact of artificial beach nourishment in Joao Pessoa - PB, considering the increase in buildings and its environmental and social consequences. Urban beaches are particularly vulnerable to the growing effects of climate change. Artificial beach nourishment is proposed as a response to coastal erosion, but experts raise concerns about its high cost, ecosystem imbalance, destruction of fragile biomes, and impact on local communities. The research employs digital simulation (Scheer, 2014) through generative visual models as resources to analyze the beach nourishment project in Cabo Branco and Tambaú. Various visualization techniques and means are overlapped to simulate images linked to the real impacts of the proposed interventions. The study also explores the relationships between gray, green, and blue infrastructures and the effects on shading and ventilation caused by the buildings. The purpose is to understand the social, environmental, and urban dynamics' impacts on the city.
keywords	Simulation, Beach nourishment, Coastal erosion
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	acadia14projects_55
id	acadia14projects_55
authors	Carlow, Jason
year	2014
title	Parametric Façade Systems: Performance-Driven design for ultra-thin buildings in Hong Kong
doi	https://doi.org/10.52842/conf.acadia.2014.055
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 55-58
summary	Through design research, analysis and modeling, the project seeks to distort the standardizing forces of building code limitations, economic concerns and mass production on the built environment. The project presents a proposal for an extremely thin building type that features a more responsive, better integrated façade developed with parametric design tools.
keywords	Parametric Design, Pre-fabrication, Façade Systems, Digital Fabrication, Linear Domesticity, Building Code
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

_id	ascaad2014_008
id	ascaad2014_008
authors	Chokhachian, Ata and Abolfazl Dehghanmongabadi
year	2014
title	Critical Attitude toward the Footstep of Googie Architecture on Parametric Architecture
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 109-118
summary	Advent of machinery age, altering in human needs and lifestyle has changed the pattern of architecture. This pattern is in close relation with different environmental, contextual, behavioral and theoretical aspects of dwellers. With a glance to the history of design, in 1940s the new style of architecture came up which was called Googie architecture. It was a movement of modern architecture, a subdivision of futurist architecture influenced by car culture and the Space Age. This style was alive up to mid-1960s but in its short life, it put a big impact on the appearance of the cities and buildings. Furthermore, in recent years the new style of architecture named Parametricism has started to take shape and accordingly the formal appearance is very close to Googie architecture. Also parametric architecture is out birth of technology and the idea of communication and futurism. The research is questioning the characteristics of parametric and Googie architecture with scrutinizing the origins and main gestures of these styles in society and culture of the period that they exist in. the research tries to figure out failures of Googie style in its own period and parallel to this, it give suggestions to implement and transform qualitative parameters in the design process by means of adapting pattern language in design process, applying parametric design thinking and simplexity in design systems.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_237
id	acadia14_237
authors	Cupkova, Dana; Azel, Nicolas
year	2014
title	MASS REGIMES: Geometrically Actuated Thermal Flows
doi	https://doi.org/10.52842/conf.acadia.2014.237
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 237-246
summary	Mass Regimes project investigates the effect of complex geometry on the process of passive heat distribution in thermal mass systems, with the intention of instrumentalizing design principles that effectively engage a greater thermal gradient between buildings and their environment. The focus is on a deeper understanding of how specific morphological manipulation of mass distribution to surface area affects the rate of thermal transfer.
keywords	Performance in Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2014_143
id	ecaade2014_143
authors	Danilo Di Mascio and Tom Maver
year	2014
title	Investigating a narrative architecture - Mackintosh's Glasgow School of Art
doi	https://doi.org/10.52842/conf.ecaade.2014.1.653
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 653-663
summary	In this paper a theoretical approach and a methodology to investigate and document a narrative architecture will be presented. In the architecture field the word narrative is often used in reference to ways of representing or telling the story of a project. Within the context of this research with the expression “narrative architecture” the authors mean an architecture that, like a book, tells a story through its material and immaterial characteristics. In order to analyze the selected characteristics of a narrative architecture, a possible approach is represented by a digital 3D reconstruction and a critical analysis of the digital model produced. The digital reconstruction process and the theoretical background have been applied to a case study, a masterpiece in the history of architecture: Mackintosh's Glasgow School of Art. Several graphic works have been created to communicate the main characteristics of this narrative architecture. The research project attempts to explore ways to study and explain existing buildings from new and innovative points of view, but at the same time it can trigger important reflections in architectural design and education.
wos	WOS:000361384700065
keywords	Digital reconstruction; narrative architecture; representation and visualization; critical analysis; 3d modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2014_029
id	caadria2014_029
authors	Devilat, Bernadette and Stephen Gage
year	2014
title	The Role of the Record and the Paradox of the Original
doi	https://doi.org/10.52842/conf.caadria.2014.317
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 317–326
summary	Earthquakes have progressively destroyed the Chilean built heritage over the years, not only due to the initial devastation they produce, but also as a result of the applied reconstruction approaches that follow. The design of reconstruction projects has usually aimed to re-establish the previous built form of historic buildings; generating new ‘heritage’ constructions that try to imitate only the appearance of previous ones rather than understanding that heritage, in the case studied, includes a sustainable mode of construction. This issue occurs in places where previous records are sometimes non-existent, which poses the question of authenticity. Considering the regularity of earthquakes in Chile, the role of accurate recording technologies, such as 3D laser scanning, becomes relevant. Their implications for new and existing architectures in the re-construction process include being a virtual database for demolition, retrofitting, intervention or replica. This paper examines the survey of the church of San Lorenzo de Tarapacá obtained in January 2013, and discusses how this, in conjunction with previous records, might impact on what is considered heritage and the design of future reconstructions.
keywords	Earthquakes; 3D scanning; heritage intervention; replica; Tarapacá
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2014_206
id	caadria2014_206
authors	Dias, Miguel Sales; Sara Eloy, Miguel Carreiro, Pedro Proença, Ana Moural, Tiago Pedro, João Freitas, Elisângela Vilar, Jorge D'alpuim and António Sérgio Azevedo
year	2014
title	Designing Better Spaces for People
doi	https://doi.org/10.52842/conf.caadria.2014.739
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 739–748
summary	We present a pilot study aiming to explore the use of biometrics sensing technology within a semi-immersive VR environment, where users face architectural spaces which induce them sensations close to fear of heights, claustrophobia, frustration and relief. Electrodermal activity was used to detect users’ emotional arousal, while navigating in VR. Navigation conditions and participants’ expertise with games were controlled. Main results show that physiological measurement of user’s perceptions can discriminate well "positive" from "negative" spaces, providing designers with basic information on people’s emotional state when using the buildings they design.
keywords	Virtual reality; computational design; human-computer interaction; space perception; biometrics sensing, electrodermal activity
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2014_025
id	ascaad2014_025
authors	Elias-Ozkan, Soofia T. and Hatem Hadia
year	2014
title	Teaching and Learning Building Performance Virtualisation
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 323-330
summary	Building performance simulation tools have indeed eased the task of evaluating a building’s performance from the point of view of lighting design, heating and cooling loads, total energy loads, acoustic properties, natural lighting, ventilation, smoke and fire containment etc. However, to use these tools correctly, not only is theoretical knowledge required but also insight that can only be attained after substantial experience. For example, in order to evaluate the thermal performance alone, one needs to understand climatology, material properties, building physics, HVAC systems, internal and external gain factors, solar impacts, etc. to name a few. Hence, teaching students of Architecture how to use these tools, and also to interpret the results properly, is a tall order. This paper reports on insights gained through teaching courses on building performance simulations to graduate students in the Department of Architecture. The course content was varied each term and a different simulation software was used; namely: ECOTECT, Energy Plus and Design Builder. Data presented here will also contain feedback from the course students regarding the modelling process of the buildings, inputting the data, simulating their performance, and evaluating the results. Also, the difficulties faced during the various steps as well as the drawbacks of the tools will be discussed in depth.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:36

_id	ecaade2014_198
id	ecaade2014_198
authors	Erik Kjems
year	2014
title	Data Fusion Using Geographic Managed Objects
doi	https://doi.org/10.52842/conf.ecaade.2014.2.495
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 495-504
summary	The way we design our buildings and cities has not really changed a lot for decades. Drawing boards have been exchanged with relatively small 30” inch monitors, pens and rulers have been exchanged with advanced digital tools mostly though disturbing, making the creative process of design merely a frustrating one. So what have we gained from CAD. Certainly a lot, but mostly the possibility to combine and fuse projects. Simulating future use and behaviour, revealing design issues and failures before actually built. Still data fusion is a relatively new challenge albeit quite obvious trying to assemble models coming from different systems and vendors representing different professional domains. This paper discusses data exchange and data fusion in general and presents a new development, which gives the possibility to enhance data as intelligent objects opening a whole new paradigm for both data exchange and data fusion.
wos	WOS:000361385100052
keywords	Data fusion; cad; managed object; data exchange; virtual machine
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_104
id	ecaade2014_104
authors	Estefania Tapias and Shubham Soni
year	2014
title	Building-up urban open spaces from shadow range analyses
doi	https://doi.org/10.52842/conf.ecaade.2014.1.129
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 129-135
summary	This paper explores an alternative approach for the creation of new built forms based on solar access analysis. Consolidated on urban areas under development, the denominated 'inverted' approach is focused on the generation of recreational open spaces based on shadow conditions caused by existing built forms, and as a starting point for the construction of new urban envelopes as possible development areas. Unlike the existing method of the 'solar envelope', the 'inverted' approach shows an alternative procedure for the construction of built forms, based on pedestrian comfort caused by solar access in urban spaces rather than on indoor performance affected by the penetration of sunlight into buildings. As a method for the creation of urban envelopes, this approach attempts to enhance pedestrian comfort according to the study of solar access in urban areas. The 'inverted' approach is based on sun path data and is developed as a generative procedure, where the results of shadow range analyses and the different urban objectives work as input parameters for the generation of urban envelopes. Based on this methodology, two Grasshopper® custom components are developed.
wos	WOS:000361384700012
keywords	Urban open spaces; solar access; shadow range simulation; generative modelling
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: