Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 118

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2020_542
id	ecaade2020_542
authors	Brown, Andre, Liu, Yisi, Webb, Nicholas and Knight, Mike
year	2020
title	Interpreting and exploiting narrative as a sketch design generator for application in VE
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 449-458
doi	https://doi.org/10.52842/conf.ecaade.2020.1.449
summary	The research in this paper focusses on how a narrative text can be the generator of an architectural drawing, or other architectural representation, such as an Architectural Virtual Environment. The drawn physical sketch has traditionally played that role. A particular approach to narrative has been important for some notable architects and their architecture. Ian Ritchie (2014), for instance, celebrates the use of poetry to describe the essential spirit of a scheme before any drawing is done. The work in the paper here describes the proposition to capture such narrative text in a systematic and structured way. We describe foundational work on how the captured narrative text has been translated into a contemporary, computer-mediated, design development environment. Different narrative accounts recalling a now demolished house form the focus case study. This case study is the vehicle through which the initial principles establishing how best to move from narrative to virtual representation are established and tested.
keywords	virtual environment; narrative; sketch; virtual reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia14_101
id	acadia14_101
authors	Richards, Daniel;Amos, Martyn
year	2014
title	Designing with Gradients: Bio-Inspired Computation for Digital Fabrication
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 101-110
doi	https://doi.org/10.52842/conf.acadia.2014.101
summary	This paper presents a novel generative model that can create functional and expressive geometries by evolving volumetric gradient patterns. We demonstrate that our model is useful for performance-driven form finding tasks such as structural optimisation, and holds vast potential for designing exotic multi-material and functionally graded materials in future applications.
keywords	Artificial Intelligence in Design, Material Agency, Biomimicry and Biological Models in Design, Generative, Parametric, and Evolutionary Design, Digital fabrication and construction, New digital design concepts and strategies
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2014_079
id	ecaade2014_079
authors	Taichi Kuma, Moritz Dörstelmann, Marshall Prado and Achim Menges
year	2014
title	Integrative Computational Design Methodology for Composite Spacer Fabric Architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 61-69
doi	https://doi.org/10.52842/conf.ecaade.2014.2.061
wos	WOS:000361385100005
summary	Spacer fabrics are 3D warp-knitted fabrics, which have a volumetric structure. Together with the capacity to differentially stretch and contract, these materials allow three dimensional which is specific to spacer fabrics. The authors present a computational design methodology which enables the generation of form based on these material characteristics and local, regional and global material manipulations. Such a process can not only generate functional surface articulations, but also control the forming of spatial textile geometries. As a resin infused composite structure the spacer fabric can serve as architectural construction and building envelope. This new methodology to develop fibrous and textile morphology is contrary to a traditional hierarchical design process, which is based on a linear strategy from design to implementation. The investigation methods are based on analogue material experimentation and integration of the materials behaviour into a computational design process. Such a feedback process can unfold potential material morphologies and performances of spacer fabric as an architectural material.
keywords	Integrative computational design; fibre composite structure; spacer fabric; material computation; form finding
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2014_021
id	ecaade2014_021
authors	Aant van der Zee, Bauke de Vries and Theo Salet
year	2014
title	From rapid prototyping to automated manufacturing
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-461
doi	https://doi.org/10.52842/conf.ecaade.2014.1.455
wos	WOS:000361384700045
summary	In this paper we present an outline of a newly started project to develop a tool which connects BIM to a manufacturing technique like 3D printing. First we will look some promising manufacturing techniques. We will design a small dwelling and export it into a BIM, from which we will extract our data to generate the path the nozzle has to follow. The chosen path is constrained by the material properties, the design and speed of the nozzle. To validate the system we develop a small VR tool in which we mimic a manufacturing tool.
keywords	Rapid prototyping; rapid manufacturing; robotics; automation; building information model (bim)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	sigradi2014_056
id	sigradi2014_056
authors	Barros, Diana Rodriguez; Stella Maris Massa
year	2014
title	Diseño de interfaces y modelos de análisis y evaluación en entornos post-digitales. Casos de aplicación con recursos educativos abiertos y repositorios [Interface design and analysis and evaluation models post-digital environmentsApplication cases with open educational resources and repositories]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 44-48
summary	We present studies and advances that link two I+D+T projects based in FADU and FI UNMdP, Argentina. These studies, started this year, have the common aim from two complementary visions, enriching an indexed and classified heritage about Open Educational Resources and repositories in postdigital environments and academic areas. This is a collaborative and interdisciplinary work with the purpose of supporting the improvement of presence, semi-presence, and distance educational process, and helping free and equal access to different available educational resources. At this state, in particular, we are interested in contributing to the improvement of REA interface designs and repositories through providing heuristic lists that join later an analysis and evaluation interface model.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia21_444
id	acadia21_444
authors	Crawford, Assia
year	2021
title	Mitochondrial Matrix
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 444-453.
doi	https://doi.org/10.52842/conf.acadia.2021.444
summary	The following project was created as part of an art residency with the Wellcome Centre for Mitochondrial Research (WCMR) at Newcastle University. The WCMR specializes in leading-edge research into mitochondrial disease, investigating causes, treatments, and ways of avoiding hereditary transmission. Mitochondria is believed to have started off as a separate species that through symbiosis came to be the powerhouse of each cell in our bodies (Hird 2009). Mitochondrial disease is a genetic disorder that is caused by genetic mutations of the DNA of the mitochondria or the cell that in turn affects the mitochondria (Bolano 2018). Mitochondria is a hereditary condition and can affect people at different stages in their lives. It can affect various organs and has a link to various types of conditions. Therefore, the patient experience is unique to each individual and the elusive nature of the condition can make it particularly challenging due to the complexity of the disorder as well as the inaccessible scale on which these variations occur (Chinnery 2014)
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia14_311
id	acadia14_311
authors	Crolla, Kristof; Williams, Nicholas
year	2014
title	Smart Nodes: A System for Variable Structural Frames with 3D Metal-Printed Nodes
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 311-316
doi	https://doi.org/10.52842/conf.acadia.2014.311
summary	The SmartNodes research explores the potentials for highly-designed, customized connection nodes to be used in combination with standardized components in enabling a system of highly differentiated structures. This paper reports on the design workflow and research in progress towards the development of a prototype structure.
keywords	3D Metal Printing, Frame Structures, Embedded Intelligence, Digital Manufacturing, Mass-Customization, Digital Design Workflow, Works in Progress.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia14_473
id	acadia14_473
authors	Cutellic, Pierre
year	2014
title	Le Cube d'Après, Integrated Cognition for Iterative and generative Designs.
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 473-478
doi	https://doi.org/10.52842/conf.acadia.2014.473
summary	This paper describes the work in progress of a research on Neurodesign and a previously described process entitled Augmented Iterations [Cutellic and Lotte, 2013]. Within this broader field of research and design explorations, we will focus on describing and comment results obtained in the neuroselection of shapes among a continuously varying flow of visual stimuli. Eventually, these results will lead to the identification of a non-linear and non-convergent potential for the human-based computation of iterative and generative designs.
keywords	Human Computer Interaction, Augmented Iteration, Neurodesign, Generative Design, Integrated Cognition, Evolutionary Computation, Design Computing and Cognition
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2014_232
id	ecaade2014_232
authors	Daniel Baerlecken and Sabri Gokmen
year	2014
title	Emphatic Lines - Surface structuring based on Walter Crane's pattern making methods
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 107-114
doi	https://doi.org/10.52842/conf.ecaade.2014.2.107
wos	WOS:000361385100010
summary	The paper introduces a method for structuring and ornamenting double-curved geometry, which is developed through the lens of Walter Crane. Crane's method for pattern making is based on underlying scaffolds and infill patterns for two dimensional surfaces. The presented research uses his method and applies it through digitals means to three dimensional surfaces. The scaffold is used to solve the problem of curvature: it creates flat facets. This approach is tested through a prototypical installation at the Musee d'Jurassien d'Art and d'histoire using aluminium sheet metal and water-jet cutting, but can also be transferred to other architectural applications.
keywords	Tendrils; patterning; making; facets
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2015_037
id	cf2015_037
authors	de Vries, Bauke; Grond, Manon and van der Zee, Aant
year	2015
title	Development of a multi-disciplinary university wide design course
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 37-46.
summary	Design is one of the basic skills of every engineer. However until now design is only seen as a core course in Architecture studies and lately in Industrial Engineering studies. This paper reports about the development of a design course for all departments of a typical technical university. After a short overview of design teaching tradition, an inventory is presented of the different interpretation of design by the various departments. The course development is presented over two periods: 2012-2014, and 2014-2015. In between a major change was conducted. The course learning goals and student evaluations are presented. In the discussion we reflect on fundamental and practical problems that occur in design teaching for such a wide audience. Finally we draw conclusions on the changing role of design what is needed to give design the same status as mathematics in a technical curriculum.
keywords	Design, Design teaching, Multi-disciplinary design
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2014_206
id	caadria2014_206
authors	Dias, Miguel Sales; Sara Eloy, Miguel Carreiro, Pedro Proença, Ana Moural, Tiago Pedro, João Freitas, Elisângela Vilar, Jorge D'alpuim and António Sérgio Azevedo
year	2014
title	Designing Better Spaces for People
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 739–748
doi	https://doi.org/10.52842/conf.caadria.2014.739
summary	We present a pilot study aiming to explore the use of biometrics sensing technology within a semi-immersive VR environment, where users face architectural spaces which induce them sensations close to fear of heights, claustrophobia, frustration and relief. Electrodermal activity was used to detect users’ emotional arousal, while navigating in VR. Navigation conditions and participants’ expertise with games were controlled. Main results show that physiological measurement of user’s perceptions can discriminate well "positive" from "negative" spaces, providing designers with basic information on people’s emotional state when using the buildings they design.
keywords	Virtual reality; computational design; human-computer interaction; space perception; biometrics sensing, electrodermal activity
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2014_054
id	ecaade2014_054
authors	Domenico D'Uva
year	2014
title	Morphogenesis and panelling, the use of generative tools beyond academia. - Case studies and limits of the method.
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 81-87
doi	https://doi.org/10.52842/conf.ecaade.2014.2.081
wos	WOS:000361385100007
summary	The increasing complexity in architectural design brought a parallel evolution of tools for shape generation and management. Digital tools which better fulfil this need are the generative design software. The aim of this work is finding and testing real life uses of generative design software beyond academic edges. The specific target is transform a complex surface into a similar surface mostly made of flat panels. As a testing ground it has been chosen the support in construction of complex shapes made with ordinary and well known tools. The combination of software used is Rhinoceros, with its plugin Grasshopper, and a couple of opensource add-on, Lunchbox and Paneling tool. The cases are listed from the simplest to the most complex, and the first four are solved with the automated procedure, the fifth, manually. Based on the cases studied it is possible to confirm that the method is applicable to the majority of the complex surfaces.
keywords	Generative; panelling; discretization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia14projects_265
id	acadia14projects_265
authors	Huller, Brennen; Long, Nels; Troufanov, Nikita; Wiscombe, Tom
year	2014
title	Puff`d Composites
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 265-266
doi	https://doi.org/10.52842/conf.acadia.2014.265
summary	PUFF’D prototype explores plasticity of composite construction and the role of the seam and joint in architecture.
keywords	plasticity, compostite construction, monolithic building components
series	ACADIA
type	Tex-Fab
email
last changed	2022/06/07 07:50

_id	ascaad2014_022
id	ascaad2014_022
authors	Kotsopoulos, Sotirios D.; Leonardo Giusti and Federico Casalegno
year	2014
title	Designing Synchronous Interactions for the Fenestration System of a Prototype Sustainable Dwelling
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 291-301
summary	This paper presents an interactive fenestration system designed for the principal façade of a prototype sustainable dwelling. The system attains autonomous, responsive and interactive modes of operation, and is able to provide synchronous response to a wide variety of environmental conditions and user needs. The method to address the design of the system was to integrate electro-active materials and real time sensing and control technologies. The test was to implement a full-scale façade with the abovementioned capabilities. This presentation discusses the features, technologies and reasoning followed in the design and implementation of the façade.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_159
id	ecaade2014_159
authors	Leyla Yunis, Ond_ej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn and Achim Menges
year	2014
title	Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2014.1.423
wos	WOS:000361384700042
summary	Research pavilions can serve as architectural scale demonstrations for the materialization of experimental forms and structures. Pavilions seek to prove and change methods of design and construction mechanisms in order to achieve desires such as material efficiency, novel spatial qualities and performative needs. The case of the ICD/ITKE Research Pavilion 2013-14 highlights the use of fiber composites in order to achieve a core-less filament winding modular system from bio-inspired lightweight structures through robotic fabrication. This paper describes the multi-disciplinary design and construction process of this pavilion that created a structure of out 36 unique components.
keywords	Bio-inspired; fiber composites; multi-disciplinary design; robotic fabrication; modular system construction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2014_266
id	sigradi2014_266
authors	Lonsing, Werner; Peter Anders Ph.D.
year	2014
title	Portable Architectural Design - Developing a Immersive Augmented Reality System for Architects
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 166-169
summary	The architectural design process is, besides sketching, bound to the office. The introduction of computational design did not really change it. This paper will introduce and discuss the development of an affordable solution for a wearable and immersive augmented-reality-system (AR) for architects based on simple hardware components with some essential options to create and edit three-dimensional virtual shapes while being on-site.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2014_112
id	ecaade2014_112
authors	Miguel Sales Dias, Sara Eloy, Miguel Carreiro, Elisângela Vilar, Sibila Marques, Ana Moural, Pedro Proênça, Joana Cruz, Jorge d'Alpuim, Nelson Carvalho, António Sérgio Azevedo and Tiago Pedro
year	2014
title	Space Perception in Virtual Environments - On how biometric sensing in virtual environments may give architects users's feedback
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 271-280
doi	https://doi.org/10.52842/conf.ecaade.2014.2.271
wos	WOS:000361385100029
summary	This paper focuses on the objective study of emotions, namely, fear induced by architectural spaces, by sensing and statistically analysing some physiological signals of users experiencing Virtual Environments (VE). For this, a virtual building was designed considering the presence of stairs and ramps as architectural elements that could affect users´ physiological states and perception of fear of falling. Thirty-one older persons participated in this study and were assigned to two experimental conditions (i.e., safe and unsafe conditions). Five main locations (beginning of the stairs; neutral room; first descending ramp; ascending ramp; and the middle of ascending ramp) were considered along the participants' path, and heart rate (HR) was collected in the vicinity of those locations. Results shown significant differences in HR activation among neutral, beginning of stairs and middle of ascending ramp. Despite the fact that the effect of condition was not fully verified for HR, participants reported more fear while interacting with the unsafe condition, with significant differences between conditions.
keywords	Virtual environments; space perception; biometric sensing; emotion; ambient assisted living; architecture design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia14_219
id	acadia14_219
authors	Moritz Dörstelmann, Moritz; Prado, Marshall; Parascho, Stefana; Knippers, Jan; Menges, Achim
year	2014
title	Integrative computational design methodologies for modular architectural fiber composite morphologies
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 219-228
doi	https://doi.org/10.52842/conf.acadia.2014.219
summary	This paper describes how computational design methodologies can serve as an integrative tool within a multidisciplinary design project. The topic is discussed based on the design and fabrication process for modular architectural fiber composite morphologies applied and developed in the ICD/ITKE Research Pavilion 2013-14.
keywords	integrative computational design, digital fabrication and construction, robotic fabrication reinforced fiber composite structures, biomimicry and biological models in design, light-weight construction, multidisciplinary design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	caadria2014_034
id	caadria2014_034
authors	Nguyen, Danny D. and M. Hank Haeusler
year	2014
title	Exploring Immersive Digital Environments
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 87–96
doi	https://doi.org/10.52842/conf.caadria.2014.087
summary	In contemporary architecture firms, most design drawings are done via use of 3D modelling software. This method requires advanced knowledge of the software in order to produce an accurate representation of space into the digital environment. The paper argues that conventional 3D visualization methods to design and analyse are restrictive to how well the user understands the space on a computer, as drawings are done ex-situ and without testing the design concept in-situ, hence there might be a level of disparity between the design and final fabrication. This is particularly a challenge when designing Urban Interaction Design concepts, as combinations of variables play a role in how the design will be received by the audience. Observing the design challenges for Urban Interaction Design and applying knowledge to architectural representation, potentially an alternative sketching process can be developed to alleviate the disparity between the conceptual design and post fabrication. This paper discusses an experimental process of using wireless spatial sensing devices to digitize physical spaces in real-time and to use on-the-spot analysis. In its conclusion the paper argues that this method enables the designer to gain advanced conceptual understandings of the intended space and thus make more informed decisions.
keywords	Spatial Design; Human-Computing Interfacing; Urban Interaction Design; Spatial 3D Visualization; Wireless Sensor Technology
series	CAADRIA
email
last changed	2022/06/07 07:58

For more results click below: