Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 668

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_173
id	caadria2014_173
authors	Lim, Jason; Ammar Mirjan, Fabio Gramazio and Matthias Kohler
year	2014
title	Robotic Metal Aggregations
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 159–168
doi	https://doi.org/10.52842/conf.caadria.2014.159
summary	The recent convergence of computational design and digital fabrication has made new forms of architectural materialization possible. A workshop conducted at the Royal Melbourne Institute of Technology investigated how differentiated lightweight metal structures may be designed and fabricated under these new conditions. The workshop aim was to complete three such structures; each one is aggregated from aluminum profiles that are robotically assembled according to computationally driven geometric logics. The key challenge was to enable participants, assumed to lack programming and robotic fabrication experience, to design and construct their structures within imposed time constraints. This paper describes the subsequent development of accessible computational design tools and a robust robotic fabrication method for the workshop, and highlights the key decisions taken with their implementation. The workshop results are discussed and the design tools evaluated with respect to them. The paper concludes by recommending an approach to developing computational design tools which emphasizes the importance of usability and integration with the fabrication process.
keywords	Robotic fabrication; computational design; visual programming; lightweight structures
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2014_176
id	ecaade2014_176
authors	Sina Mostafavi and Matthew Tanti
year	2014
title	Design to fabrication integration and material craftsmanship - A performance driven stone architecture design system based on material, structural and fabrication constraints and criteria
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 445-454
doi	https://doi.org/10.52842/conf.ecaade.2014.1.445
wos	WOS:000361384700044
summary	This paper presents a computational design methodology through describing of a case study on stone building system. In addition to establishing a performance driven form-finding methodology, the objective is to redefine local craftsmanship methods as industrial fabrication techniques in order to introduce the constructability of the design solutions as one of the main performance criteria. Therefore, the focus of the methodology is to facilitate architectural design processes through developing of customized computational design tools and workflows for data integration and concurrent performance evaluation. The research starts with the hypothesis that the technological advancements in digital design and fabrication can lead to re-exploration and improvement of traditional building techniques with local materials. The paper explains different stages of the methodology and the way the chained design to fabrication processes would lead to constructible, structurally possible and optimal design solutions of small scale and simple symmetric design solutions to complex topologies at the scale of larger complex buildings.
keywords	Digital materiality ; design information exchange; compression-only stone structure; computer aided craftsmanship ; robotic fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2014_000
id	ecaade2014_000
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 1
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 668 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.2
summary	This is the first volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The first volume of the proceedings contains 65 papers grouped under seven sub-themes (Towards Smarter Cities, Design Tool 1, CAAD Education, Fabrication, Shape-Form-Geometry, Visualisation and Digital Heritage).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2014_094
id	ecaade2014_094
authors	Ruggero Lancia and Ian Anderson
year	2014
title	Digital Curation for CAAD Curricula - Bridging Mainstream and Speculative Design Procedures to promote curatorial competences for Architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 313-322
doi	https://doi.org/10.52842/conf.ecaade.2014.1.313
wos	WOS:000361384700031
summary	As the design processes in Architectural practices switch toward entirely digital workflows, architects are gradually required, because of their legal and commercial liability, to provide for both a relatively long term curation of their own digital products and the deposit of authoritative data. But, despite being the sole curation actors for their data, architects receive little education or training in either pertinent competences nor agreed and established procedures to comply with these duties. In this paper, the design of Digital Curation courses within CAAD Curricula will be discussed against the investigation results of the DEDICATE project, an AHRC funded project hosted at the Humanities Advanced Technology and Information Institute of the University of Glasgow.
keywords	Caad curricula; digital curation; generative design; digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_021
id	sigradi2014_021
authors	Araujo, André L.; Wilson Barbosa Neto, Gabriela Celani
year	2014
title	Treliças espaciais metálicas: combinação de parâmetros formais e materiais nos estágios iniciais do processo de projeto [Spatial steel trusses: Integrating structural pre-dimensioning requirements in the early stages of the parametric design]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 355-359
summary	The integration of structural considerations in architectural geometry processing is among the topics most discussed in the complex shapes design. While some design tools allow the designer to begin with an inefficient form and then turn it into a more efficient one, other tools allow exploring and creating structural forms considering both formal and structural aspects from the beginning. This paper presents a parametric design approach to create spatial steel trusses with the combination of two strategies: (1) shell surface to set out structural elements; (2) cross section properties to ensure structural stability aspects. In this paper we discuss how the combination of these strategies can contribute to the use of parametric design techniques in the early stages of the design process, taking into account both structural optimization and production aspects.
keywords	Structural design; Spatial Structures; Tubular trusses; Parametric Design; Dimensioning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_057
id	sigradi2014_057
authors	Barros, Diana Rodriguez; María Mandagarán
year	2014
title	Pensamiento de diseño y construcción de narrativas visuales. Caso de prácticas didácticas disruptivas en entornos postdigitales [Design thinking and construction of visual narratives. Case teaching practices in disruptive postdigitals environments]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 195-199
summary	Design Thinking recognizes processes linked to empathy, creation, prototyping and storytelling, that condition design methodologies to solve complex problems with user participation. From this perspective, next to disruptive practices, we present learning experiences focus in management, design and production of graphic databases in Web 2.0 and 3.0 contexts. They are linked to photomontages and graphic communication pieces of urban-architectural works and narratives that give meaning and entity to those interventions. We recorded results that value spatial thinking with images. Also the presence of traditional skills with hybrid skills in students, that encourage fluency, creativity and innovation, self-learning, experimentation, teamwork and network integration.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_137
id	ecaade2014_137
authors	Elif Erdine and Alexandros Kallegias
year	2014
title	Reprogramming Architecture - Learning via Practical Methodologies
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 373-380
doi	https://doi.org/10.52842/conf.ecaade.2014.1.373
wos	WOS:000361384700037
summary	This paper aims to address innovative approaches in the pedagogical aspects of architecture by describing the work of AA Summer DLAB and Athens \| Istanbul (AI) Visiting Schools of the Architectural Association (AA) School of Architecture in London. The presented work is part of a research which enables a more seamless transition from design to fabrication and from academia to profession. The paper formulates the pedagogical and methodological approach towards the integration of generative design thinking, large-scale prototyping, kinetic/interactive design, and participatory design. As such, a discussion on the methods of overcoming the fragmented nature of architectural education via the elaboration of the methodology, computational setup, fabrication strategies, and interaction / kinetic modes of the selected programmes is aspired.
keywords	Computational design research and teaching; biomimetics; generative design; kinetic / interactive design; participatory design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia14_229
id	acadia14_229
authors	Georgiou, Michail; Georgiou, Odysseas; Kwok, Theresa
year	2014
title	Form Complexity - Rewind \| ‘God’s Eye’ Sukkahville 2013
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 229-236
doi	https://doi.org/10.52842/conf.acadia.2014.229
summary	A bottom-up, multidisciplinary approach, redefining design and construction of complex forms through integration of material properties, fabrication constraints and construction logistics.
keywords	Material Logics & Tectonics, Performance in Design, Computational design research and education, Practice-based and interdisciplinary computational design research, Digital fabrication and construction, New digital design concept and strategies
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2014_161
id	caadria2014_161
authors	Heydarian, Arsalan; Joao P. Carneiro,David Gerber, Burcin Becerik-Gerber, Timothy Hayes and Wendy Wood
year	2014
title	Immersive Virtual Environments: Experiments on Impacting Design and Human Building Interaction
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 729–738
doi	https://doi.org/10.52842/conf.caadria.2014.729
summary	This research prefaces the need for engaging with endusers in early stages of design as means to achieve higher performing designs with an increased certainty for enduser satisfaction. While the architecture, engineering, and construction (AEC) community has previously used virtual reality, the primary use has been for coordination and visualization of Building Information Models (BIM). This work builds upon the value of use of virtual environments in AEC processes but asks the research question "how can we better test and measure design alternatives through the integration of immersive virtual reality into our digital and physical mock up workflows? " The work is predicated on the need for design exploration through associative parametric design models, as well as, testing and measuring design alternatives with human subjects. The paper focuses on immersive virtual environments (IVEs) and presents a literature review of the use of virtual environments for integrating enduser feedback during the design stage. In a controlled pilot experiment, the authors find that human participants perform similarly in IVE and the physical environment in everyday tasks. The participants indicated they felt a strong sense of "presence" in IVE. In the future, the authors plan on using IVE to explore the integration of multi agent systems to impact building design performance and occupant satisfaction.
keywords	Virtual Reality; Prototyping; Design Technology; Immersive Virtual Environments; Feedback
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2014_015
id	ascaad2014_015
authors	Mueller, Volker
year	2014
title	Second Generation Prototype of a Design Performance Optimization Framework
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 199-209
summary	The integration of performance evaluation into the building design process becomes increasingly important in order to respond to demands on contemporary design with respect to the future of our built and natural environments. This paper presents work on the second iteration of an implementation of a design performance optimization framework that attempts to respond to the challenges of integrating analysis and optimization into the design process. Main challenges addressed are speed of feedback through implementation on the cloud, utilizing parallelization of computations and availability of results in the computational context of the model through leveraging the parametric nature of the application; The goal is to enable designers in their decision-making throughout the design process with focus on earlier phases of the design process during which changes can be implemented faster and at much lower costs than in later phases of design or even during construction and occupation.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_003
id	ascaad2014_003
authors	Parlac, Vera
year	2014
title	Surface Dynamics: From dynamic surface to agile spaces
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 39-48
summary	Behavior, adaptation and responsiveness are characteristics of live organisms; architecture on the other hand is structurally, materially and functionally constructed. With the shift from ‘mechanical’ towards ‘organic’ paradigm (Mae-Wan Ho, 1997) attitude towards architectural adaptation, behavior and performance is shifting as well. This change is altering a system of reference and conceptual basis for architecture by suggesting the integration of dynamics – dynamics that don’t address kinetic movement only but include flows of energies, material and information. This paper presents an ongoing research into kinetic material system with the focus on non-mechanical actuation (shape memory alloy) and the structural and material behavior. It proposes an adaptive surface capable of altering its shape and forming small occupiable spaces that respond to external and internal influences and flows of information. The adaptive structure is developed as a physical and digital prototype. Its behavior is examined at a physical level and the findings are used to digitally simulate the behavior of the larger system. The design approach is driven by an interest in adaptive systems in nature and material variability (structural and functional) of naturally constructed materials. The broader goal of the research is to test the scale at which shape memory alloy can be employed as an actuator of dynamic architectural surfaces and to speculate on and explore the capacity of active and responsive systems to produce adaptable surfaces that can form occupiable spaces and with that, added functionalities in architectural and urban environments.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_239
id	ecaade2014_239
authors	Pedro Filipe Martins and José Pedro Sousa
year	2014
title	Digital Fabrication Technology in Concrete Architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 475-484
doi	https://doi.org/10.52842/conf.ecaade.2014.1.475
wos	WOS:000361384700047
summary	Technological innovation has been an important driving force in architecture, enabling and inspiring architects and engineers by giving them new tools for solving existing problems. In the last two decades, the exploration of digital design and fabrication technologies has stimulated the development of a variety of interests and strategies to materialize increasingly complex and customized solutions in architecture, with traditional building materials. Reinforced concrete is the most widely used material in the building industry today and throughout its history has been the subject of vast research into its performance as a construction material and its tectonic potential in architecture. As such, the introduction of digital fabrication processes in concrete construction represents the biggest prospect for renovation of our built environment and at the same time, presents particular difficulties and opportunities, which are now being addressed. In an effort to investigate the alternative design and material possibilities in concrete emerging from the use of digital fabrication technologies in architecture, this paper proposes a focused view of digital fabrication applied to concrete construction with two areas of research. By framing the research in the context of reference works in concrete architecture of the 20th century, this paper describes and illustrates taxonomy of existing and possible types of integration of digital fabrication technologies in concrete architecture in the realms of Practice and Research.This characterization allows the authors to frame the relation between material, technology and architecture in different environments regarding the same material, extracting a clear image of existing processes, their potential and shortcomings, as well as expectations for future developments.
keywords	Digital fabrication; concrete; cam; robotics; sustainability
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2014_515
id	caadria2014_515
authors	Pipe, Nicola
year	2014
title	Integration Processes for Advanced Material Fabrication in Architecture
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 943–944
doi	https://doi.org/10.52842/conf.caadria.2014.943
series	CAADRIA
type	poster
email
last changed	2022/06/07 08:00

_id	sigradi2014_250
id	sigradi2014_250
authors	Rocha, Germana; Aristóteles Cordeiro
year	2014
title	Modelagem tridimensional digital em abordagem tectônica na concepção da arquitetura [Digital Three-dimensional Modeling by a tectonic approach in architectural design]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 250-254
summary	This paper reports a teaching and learning experience of architectural digital three-dimensional geometric modeling from its tectonic character, with regard to the interactions between the formal architectural framework and its sturdy structure. Was held at the undergraduate course in Architecture and Urbanism of the Universidade Federal da Paraíba. It´s an interdisciplinary exercise aimed at the integration of knowledge where students utilize the contents learned in the discipline of Structural Systems I for the construction of a digital three-dimensional geometric model with the Trimble´s software Sketchup in the Perspective discipline, resulting in the development of models with greater formal consistency.
keywords	Digital modeling; Structural systems; Architectural education
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	caadria2014_288
id	caadria2014_288
authors	Bacinoglu, Zeynep and Sema Alacam
year	2014
title	A Context Based Approach to Digital Architectural Modelling Education
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 811–820
doi	https://doi.org/10.52842/conf.caadria.2014.811
summary	This paper presents a context based framework for introducing digital modelling and fabrication to architecture students. Modelling has being taught either as a separate skill, or introduced within a comprehensive context of conventional design approaches. We argue that, a ‘digestive context’ might guide students to gain designing experience with/in digital media in a gradual and a cumulative way. This paper is based on a series of modelling and fabrication exercises as part of a one-semester digital design and modelling studio course for postgraduate students. We focus on the impact the initial exercises we assigned our students had on the final design product; We discuss the affordance and adaptability of the method that was developed by the students.
keywords	Digital design; fabrication; architectural education
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia14_409
id	acadia14_409
authors	Bard, Joshua; Gannon, Madeline; Jacobson-Weaver, Zachary; Jeffers, Michael; Smith, Brian; Contreras, Mauricio
year	2014
title	Seeing is Doing: Synthetic Tools for Robotically Augmented Fabrication in High-Skill Domains
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 409-416
doi	https://doi.org/10.52842/conf.acadia.2014.409
summary	The historical split between visualization and actualization in architectural design has encouraged a disciplinary split between representation (the domain of the designer) and construction (a domain entirely removed from the Architect’s purview). This split between seeing and doing in architectural design can be questioned in the context of contemporary robotic technologies where physical and digital workflows comingle in high-skill, collaborative domains.
keywords	Architectural Robotics, Human-Robot Collaboration, MOCAP, Adaptive Fabrication, High-Skill Domain, Robotics and Autonomous Design Systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_144
id	sigradi2014_144
authors	Böhme, Luis Felipe González; Cristián Calvo Barentin
year	2014
title	Desarrollo de competencias avanzadas en computación en la formación de los arquitectos latinoamericanos del siglo XXI [Advanced Computing Competence Development in 21st-century Latin American Architects’ Education]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 217-221
summary	Automation and robotics are increasingly penetrating all types of industries in developed countries including architecture, i.e., products and services related to architectural practice. Therefore, more than ever, architects, designers and artists are interested in developing computational thinking skills to be able to integrate more functionality into their creations and take direct control of their fabrication. But what can a small school of architecture in Latin America do to prevent the deskilling of its graduates and, instead, create new labor opportunities for them abroad. Third-year students integrate physical computing with visual programming in an active learning environment to develop free proposals.
keywords	Architectural education; Physical computing; Visual programming; Computational thinking; Active learning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2014_201
id	caadria2014_201
authors	Cabrinha, Mark N.
year	2014
title	Lattice Shell Methodologies
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 191–200
doi	https://doi.org/10.52842/conf.caadria.2014.191
summary	This paper outlines a working methodology for the parametric development of lattice shell structures combining surface topology and form-finding with the material constraints of straight lath members woven into a geodesic network. By employing non-uniform grid spacing, a wider typology of spatial types can be employed than can be achieved with traditional flat-matt lattice shell construction. As a parametric design tool and working methodology, some of the heavy lifting in form-finding and geodesic analysis can be off-loaded to the tool, such that a more comprehensive attention can be placed on other design criteria such as spatial development and environmental response while maintaining the elegance and economy of lattice shells.
keywords	gridshells; geodesics; form-finding; bending-active structures; wood; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: