Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 670

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_124
id	caadria2014_124
authors	Williams, Nicholas; Sascha Bohnenberger and John Cherrey
year	2014
title	A System for Collaborative Design on Timber Gridshells
doi	https://doi.org/10.52842/conf.caadria.2014.441
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 441–450
summary	The bent timber laths of the Sound Bites gridshell create two types of performance space over an area of almost 100 m2. Such postformed gridshells are a wellestablished design solution for creating curved forms from linear elements. Extending principles developed since the 1970s, contemporary digital tools have been utilised to drive a renewed interest in them, primarily through so-called form-finding techniques which connect digital and material models through a simulation of shape under bending loads (Nettlebladt, 2013) and the definition of efficient structural geometry acting under compression loads only (Hernandez et. al., 2012). This paper describes the workflow conceived and implemented for the Sound Bites structure. A central challenge of the research was for such a workflow to allow for the principles of gridshell design to be engaged in parallel to other tight constraints and design drivers. As such it needed to facilitate close collaboration between architectural, engineering and fabrication experts. This workflow was tested in the design and realisation of the full-scale structure within a six-week period. The gridshell design was developed through the manipulation of the shape of two edge profiles and the shell form spanning between these. Architectural and fabrication constraints were met and the workflow allowed for a sufficient level of structural analysis to be fed back to inform the design.
keywords	Digital Workflow; Collaborative Design; Digital Formfinding; Digital Fabrication
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2014_036
id	ascaad2014_036
authors	Assassi, Abdelhalim; Belal Taher and Samai Rachida
year	2014
title	Intelligent Digital Craft to Recognize Spatial Installations for Residential Designs: Approach to Understand the Design of Housing Barbaric in Algeria using the Majali Composition Software
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 195-196; 443-456
summary	Architecture took an evolutionary context over time, where designers were interested in finding pragmatic spontaneous appropriate solutions and met the needs of people in urban and architectural spaces. Whereas, in modern architecture an intense and varied competition happens between architects through various currents of thoughts , schools and movements, however, that creativity was the ultimate goal , and a the same time we find that every architect distinguishes himself individually or collectively through tools of architectural expression and design representation adopting a school of thought, using , for example, the leaves of various sizes and diverse technical drawing tools to accurately show that he can be read by professionals or craftsmen outside the geographical scope to which it belongs .With the rapid technological development which accompanied the digital craft in the contemporary world , The digital craft summed up time, distance and tools , so they gave the concept more appropriate accuracy , as virtualization has become the most effective tool for Architecture To reach the ideal and typical results at the practical level, or pure research. At the level of residential design and on the grounds that housing plays an important role in the government policies and given that housing is a basic unit common to all urban communities on earth , the use of different programs to show its typicality in two dimensions or in the third dimension - for example, using software "AutoCAD " " 3D Max " , " ArchiCAD " ... etc. - gave virtualisation smart, creative and beautiful forms which lead to better understand the used /or to be used residential spaces, and thus the conclusion that the life system of dwelling under design or under study , as can specifically recognize spatial structure in housing design - using digital software applying "Space Syntax" for example - in the shadow of slowly growing digital and creative development with the help of high-speed computers . the morphological structure of the dwelling is considered to be the most important contemporary residential designs Investigation through which the researcher in this area aims to understand the various behavioral relations and social structures within the projected residential area, using Space Syntax techniques. Through the structural morphology of dwellings can be inferred quality networks, levels of connectivity and depth and places of openness or closure within the dwelling under study, or under design. How, then, have intelligently contributed this digital craft to the perception of those spatial fixtures ? The aim of this research is to apply an appropriate program in the field of vernacular residential design and notably Space syntax which relate to the understanding and analysis of spatial structures, and also demonstrate its role at the morphological and spatial structure aspects, and prove how effective it helps to understand the social logic of domestic space through social individual/collective relationships and behaviors projected on the spatial configurations of dwellings. The answer to the issue raised above and at the methodological aspect, the study discussed the application of space syntax techniques on the subject. The findings tend to prove the efficiency by comparing samples of Berber vernacular domestic spaces from the Mzab, the Aures and Kabilya in Algeria, and has also led to ascertain the intelligibility of space syntax techniques in reading the differences between the behaviors in domestic spaces in different areas of the sample through long periods of time .
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:39

_id	ascaad2014_006
id	ascaad2014_006
authors	Badrani, Hayet and Bernard Duprat
year	2014
title	Analysis of Produced Form and Innovation in Architectural Design
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 85-97
summary	This paper is about the analysis of architectural objects; it follows and compares the form’s variation. In fact, a collection of buildings can be characterized by the morphology decomposition or the morphometric treatment. Operating method is put in place to study the possible arrangements of the basic components according to morphotic structures and predefined relations. Based on the questions about the produced form, this method promotes a creative situation; it can support and help teaching innovation in the field of architectural design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2021_291
id	caadria2021_291
authors	Bansal, Medha and Erdine, Elif
year	2021
title	Bio-Mineralisation And In-Situ Fabrication Of In-Dune Spaces: Case Study Of Thar Desert
doi	https://doi.org/10.52842/conf.caadria.2021.1.493
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 493-502
summary	Desertification has made large productive landscapes in the South-west Thar desert redundant, subjected people to migration and induced a constant influx of sand into the region (Singhvi and Amal, 2014). The abundance of sand creates an opportunity to adopt an existing technique, Bio-mineralisation, to develop a sand based composite material which, when treated with a construction binder like sodium alginate, can be used for engineering purposes. The paper sets a theoretical framework to develop a fabrication mechanism with microbial-grout injections and propose the development of in-dune/underground assembly of habitable spaces. Each of the sub-components of material system, fabrication mechanism and In-dune structures are detailed, and evaluated to devise a hierarchy between them. Their interdependencies together inform design strategies, a phasing plan and global time scale for overall terrain transformation.
keywords	Bio-mineralisation; Bio-grouting; In-dune fabrication; Tool path algorithms; Micro-climate analysis
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_201
id	caadria2014_201
authors	Cabrinha, Mark N.
year	2014
title	Lattice Shell Methodologies
doi	https://doi.org/10.52842/conf.caadria.2014.191
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 191–200
summary	This paper outlines a working methodology for the parametric development of lattice shell structures combining surface topology and form-finding with the material constraints of straight lath members woven into a geodesic network. By employing non-uniform grid spacing, a wider typology of spatial types can be employed than can be achieved with traditional flat-matt lattice shell construction. As a parametric design tool and working methodology, some of the heavy lifting in form-finding and geodesic analysis can be off-loaded to the tool, such that a more comprehensive attention can be placed on other design criteria such as spatial development and environmental response while maintaining the elegance and economy of lattice shells.
keywords	gridshells; geodesics; form-finding; bending-active structures; wood; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_273
id	sigradi2014_273
authors	Chiarella, Mauro; Analía Raffin, Silvina Lopaczek, Sebastian Martini, Nicolas Góngora, Francisco Bressan
year	2014
title	Pieles Arquitectónicas Dinámicas. Prototipos a escala mediante prototipado rápido, microcontroladores y patrones plegados [Dynamic architectural skins. Scale prototypes using rapid prototyping, microcontrollers and folding patterns]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 96-100
summary	Contemporary architecture replaces the concept facade by skin: outer layer mediating between the building and its surroundings; active, informed, connected and communicative membrane. Our training and practice in architecture, still working for the rigor and stability of modular geomerías on determinants of a unique spatial and morphological situation passive. In the teaching of architecture in Latin America there are no exercises that incorporate a learning design to create flexible dynamic geometries as possible structures for sensitive skin. The research aims to explore the possibilities and systematize the dynamic folding of planar surfaces using geometric simulation programs (freeform origami, Grasshopper); building scale prototypes (rapid prototyping and arduino microcontroller) and subsequent verification of energy analysis program.
keywords	Architectural skin; folded patterns; arduino; rapid prototyping
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	acadia14_209
id	acadia14_209
authors	Huang, Alvin; Lewis, Stephen
year	2014
title	Nearly Minimal: How intuition and analysis inform the minimal surface geometries in the Pure Tension Pavilion
doi	https://doi.org/10.52842/conf.acadia.2014.209
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 209-218
summary	This paper focuses on the application of tool, exploration of technique, and subsequent development of an informed design intuition for generating "near" minimal surface structures in the design, development and construction of the Pure Tension Pavilion.
keywords	Form-finding, Mesh Relaxation, Kangaroo, Intuition, structural analysis
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:50

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
wos	WOS:000361384700036
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2014_151
id	ecaade2014_151
authors	Zeta (Georgia) Kachri and Sean Hanna
year	2014
title	Parasitic Ecologies - Algorithmic Space through Diffusion-Limited Aggregation of Truncated Octahedrons
doi	https://doi.org/10.52842/conf.ecaade.2014.2.539
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 539-546
wos	WOS:000361385100056
summary	Parasitic architecture allows the creation of flexible structures that feed off existing infrastructure. Additionally, self-organised models that grow in response to environmental forces and adapt to their context introduce new ways for intervening in architectural design. This paper investigates the properties of self-organised parasitic structures that evolve by creating aggregation forms in the context of simulated structural environments. The growth process of the parasitic structures is inspired by the fungal colonies and is based on the rules of diffusion-limited aggregation (DLA) extended to support real-time force analysis and aggregation of space-filling geometry. The results of the simulations demonstrate that the developed diffusion-limited aggregation of truncated octahedrons is capable of providing self-sustained structures able to adapt in environments with different spatial limitations.
keywords	Adaptive structural models; parasitic architecture; diffusion-limited aggregation; self-organisation, java
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	sigradi2015_12.215
id	sigradi2015_12.215
authors	Riether, Gernot; Wit, Andrew John
year	2015
title	Redefining the Parametric Pedagogy. Reflections on a digital design build studio
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 713-718.
summary	During the summer of 2014, a unique pedagogical prototype was initiated and tested through a short five-week digital design build workshop lead by Professors Gernot Riether and Andrew John Wit at Ball State University in Muncie, Indiana. Unlike the typical design studio typology where projects are initiated through a series of top down predetermined project frameworks, this studio allowed for projects to emerge through student’s navigating an area of research in digital design and fabrication. The studio was supplied by nothing more than an entrepreneurial mindset, initial budget and the requirement that an architectural project would be realized at full-scale by the end of the semester. Over the course of the semester, students tested, stumbled and pressed through a series of follies and prototypes that resulted in the realization of the Underwood Pavilion. This paper explores a novel design pedagogy, through the lens of this Digital Design Build Studio.
keywords	Studio pedagogy, Computation, Design Build, Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	ascaad2022_099
id	ascaad2022_099
authors	Sencan, Inanc
year	2022
title	Progeny: A Grasshopper Plug-in that Augments Cellular Automata Algorithms for 3D Form Explorations
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 377-391
summary	Cellular automata (CA) is a well-known computation method introduced by John von Neumann and Stanislaw Ulam in the 1940s. Since then, it has been studied in various fields such as computer science, biology, physics, chemistry, and art. The Classic CA algorithm is a calculation of a grid of cells' binary states based on neighboring cells and a set of rules. With the variation of these parameters, the CA algorithm has evolved into alternative versions such as 3D CA, Multiple neighborhood CA, Multiple rules CA, and Stochastic CA (Url-1). As a rule-based generative algorithm, CA has been used as a bottom-up design approach in the architectural design process in the search for form (Frazer,1995; Dinçer et al., 2014), in simulating the displacement of individuals in space, and in revealing complex relations at the urban scale (Güzelci, 2013). There are implementations of CA tools in 3D design software for designers as additional scripts or plug-ins. However, these often have limited ability to create customized CA algorithms by the designer. This study aims to create a customizable framework for 3D CA algorithms to be used in 3D form explorations by designers. Grasshopper3D, which is a visual scripting environment in Rhinoceros 3D, is used to implement the framework. The main difference between this work and the current Grasshopper3D plug-ins for CA simulation is the customizability and the real-time control of the framework. The parameters that allow the CA algorithm to be customized are; the initial state of the 3D grid, neighborhood conditions, cell states and rules. CA algorithms are created for each customizable parameter using the framework. Those algorithms are evaluated based on the ability to generate form. A voxel-based approach is used to generate geometry from the points created by the 3D cellular automata. In future, forms generated using this framework can be used as a form generating tool for digital environments.
series	ASCAAD
email
last changed	2024/02/16 13:38

_id	caadria2014_291
id	caadria2014_291
authors	Thomas, Russell C. and John S. Gero
year	2014
title	Computational Modelling of Designer-User Interactions and Value Systems
doi	https://doi.org/10.52842/conf.caadria.2014.075
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 75–84
summary	This paper develops a multi-agent computational model to simulate the effects of designer-user interactions on the design of products, interactions that are both direct and indirect. The architecture of an agent-based computational system is described, with emphasis on how it models situated design computing and cognition, including both designer and consumer agents. Indicative results obtained from running simulations are presented. The primary contribution is to demonstrate that situated design computing and cognition can be modelled using Computational Social Science methods.
keywords	situated design computing; multi-agent systems; agent modelling; designer-user interaction; innovation; simulation
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia14projects_213
id	acadia14projects_213
authors	Tinghe, Patrick; Mutlow, John
year	2014
title	La Brea Affordable Housing
doi	https://doi.org/10.52842/conf.acadia.2014.213
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 213-217
summary	The project is a highly sustainable, 50,000 sq ft mixed use affordable housing project housing the formerly homeless and people living with disabilities.
keywords	affordable housing, sustainable
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:56

_id	sigradi2014_263
id	sigradi2014_263
authors	Wit, Andrew John
year	2014
title	Towards an Intelligent Architecture “Creating Adaptive Building Systems for Inhabitation”
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 328-332
summary	Existing typologies of emergency housing rely heavily on conventional designs, materials and labor-intensive construction methodologies, which in post-disaster environments place large amounts of strain on the surrounding communities, material manufacturers and financial systems. With ever more unpredictable environmental conditions, should our new housing prototypes not also have the ability to simultaneously adapt to rapidly changing environmental conditions? This paper investigates the potential of developing a new typology of rapidly deployable emergency housing prototypes through the creation of a system which relies on embedded design intelligence, advanced fabrication and adaptable systems, rather than attempting to make existing building systems smarter.
keywords	Adaptable; Housing; Skin; Robotics; Pneumatic
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	caadria2014_298
id	caadria2014_298
authors	Yu, Rongrong; John Gero and Ning Gu
year	2014
title	Cognitive Effects of Using Parametric Modeling by Practicing Architects: A Preliminary Study
doi	https://doi.org/10.52842/conf.caadria.2014.677
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 677–686
summary	This paper presents the results of a protocol study which explores the cognitive behaviour of eight practicing architects while they used a geometric modeller (Rhino) with a parametric modeller (Grasshopper) as they designed. The protocol videos collected were transcribed, segmented and coded using the FBS ontology as the coding scheme. This resulted in each protocol being transformed from a qualitative video into a sequence of symbols from the FBS ontology and further divided into design knowledge and rule algorithm classes. The sequence of symbols forms the foundation on which quantitative representations of cognitive behaviour can be constructed and compared. Results of the relative cognitive effort expended on design knowledge and rule algorithm classes, through an articulation of the cognitive design issues, have been compared and discussed. These results provide insight into the use of parametric modellers by architects.
keywords	Design cognition; parametric modelling; protocol studies.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2014_056
id	caadria2014_056
authors	Abdelhameed, Wael A.
year	2014
title	Creativity and VR Use
doi	https://doi.org/10.52842/conf.caadria.2014.719
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 719–728
summary	Creativity with its various processes is involved in all design actions. Creativity used in architectural design is different than creativity in other domains. However, creativity in general with its related cognition processes has no general theory. This research proposes certain activities of initial architectural design phases in which the role of activity is important. The research proceeds to present a case study of two architectural design studios in which a VR environment is employed in order to investigate the effect of VR use on the creativity in those initial design phases. The research applies a methodology of qualitative and quantitative analysis. Various architectural design factors are neutralized to overcome the influence generated from human factors variation and design thinking prejudice on architectural designing and the associated creativities.
keywords	Virtual Reality; Creativity; Architectural Design; Design Studio
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

For more results click below: