Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 656

Reformat results as: short short into frame detailed detailed into frame

_id	acadia14_609
id	acadia14_609
authors	Vierlinger, Robert, Bollinger, Klaus
year	2014
title	Acommodating Change in Parametric Design
doi	https://doi.org/10.52842/conf.acadia.2014.609
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 609-618
summary	This work presents a set of tools and methods to lever the flexibility and openness of contemporary parametric design environments as well as modern computational power, to ultimately push the quality of the artifact but also the design process itself.
keywords	generative, parametric and evolutionary design; multi-objective search; custom optimization; parallel computing; open representation; karamba; octopus
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac201412302
id	ijac201412302
authors	Baerlecken, Daniel; Russell Gentry, Matthew Swarts, et al.
year	2014
title	Structural, Deployable Folds - Design and Simulation of Biological Inspired Folded Structures
source	International Journal of Architectural Computing vol. 12 - no. 3, 243-262
summary	This paper presents a concept of folding as a form-generator for a structural system that allows the ability to deploy large spanning structures. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modeling process that allows structural performance evaluation of different types of the same origami family in order to optimize the geometry for a given scenario. The workflow between scripting based form generation - within Rhinoceros and Excel - and LS-DYNA is presented in detail. Additionally, within the context of an architectural project we discuss the question of scalability from a thin microstructure to a thickened roof structure.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2014_030
id	sigradi2014_030
authors	Borges, Marina Ferreira; Ricardo Hallal Fakury
year	2014
title	Processo iterativo de design paramétrico e projeto estrutural aplicado ao desenvolvimento de torre eólica [Iterative process of parametric design and structural project applied to the development of lattice and wind power]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 35-38
summary	This article proposes to study the process of parametric design integrated analysis and structural design. This application model is called Performative Model; the form is generated based on performance criteria. The digital tools facilitate the information flow between designers using parametric model and Finite Element Analysis. To research the method of Performative Model is proposed the development of a conceptual framework of lattice wind tower with the aim of a quantitative and qualitative structure optimization. Therefore, the parametric modeling will be done using Rhinoceros software, the plugin for creating algorithms Grasshoper and structural analysis plugin Scan & Solve.
keywords	Performative model; Parametric model; Finite Element Analysis; Lattice Wind Tower
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2014_233
id	ecaade2014_233
authors	Evangelos Pantazis and David Gerber
year	2014
title	Material Swarm Articulations - New View Reciprocal Frame Canopy
doi	https://doi.org/10.52842/conf.ecaade.2014.1.463
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 463-473
summary	Material Swarm Articulations, is an experiment in developing a multi-objective optimization system that incorporates bottom up approaches for informing architectural design. The paper presents an initial built project that demonstrates the combination of a structural form finding method, with an agent based design system through the digital fabrication processes. The objective of this research is to develop a workflow combined with material and construction constraints that has the potential to increase performance objectives while enabling geometric complexity and design driven articulation of a traditional tectonic system. The emphasis of the research at this stage is to take advantage of material properties and assembly methods applied to a digital design and simulation workflow that enables emergent patterns to influence the performance of the space.The paper illustrates the research through a prototype of a self standing canopy structure in 1:1 scale. It presents results of the form finding, generative patterning, digital fabrication affordances and sets and agenda for next steps in the use of multi-agent systems for design purposes.
wos	WOS:000361384700046
keywords	Computational design; agent-based system; digital fabrication; parametric design; reciprocal frames; form finding; multi-objective optimization, multi-agent systems for design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2014_118
id	caadria2014_118
authors	Herr, Christiane M. and Thomas Fischer
year	2014
title	A Notation to Aid Column and Beam Layout Design for Reinforced Concrete Construction in China
doi	https://doi.org/10.52842/conf.caadria.2014.399
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 399–408
summary	In this paper we report on the ongoing development of a toolkit to support the design of column and beam layouts for reinforced concrete structures in China. We present a visual, human- and machine-readable notation for architects and structural engineers to rapidly model column and beam layouts, as well as our underlying considerations. In conjunction with the toolkit, which consists of a CAD package, an editor, a parser, and an interpreter, the notation addresses aspects of local construction practice and supports design considerations including appearance, structural viability, constructability, and cost.
keywords	Generative design; structural design; local materialisation; concrete; China; cost evaluation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia14_101
id	acadia14_101
authors	Richards, Daniel;Amos, Martyn
year	2014
title	Designing with Gradients: Bio-Inspired Computation for Digital Fabrication
doi	https://doi.org/10.52842/conf.acadia.2014.101
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 101-110
summary	This paper presents a novel generative model that can create functional and expressive geometries by evolving volumetric gradient patterns. We demonstrate that our model is useful for performance-driven form finding tasks such as structural optimisation, and holds vast potential for designing exotic multi-material and functionally graded materials in future applications.
keywords	Artificial Intelligence in Design, Material Agency, Biomimicry and Biological Models in Design, Generative, Parametric, and Evolutionary Design, Digital fabrication and construction, New digital design concepts and strategies
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	acadia14_267
id	acadia14_267
authors	Ahlquist, Sean
year	2014
title	Post-forming Composite Morphologies: Materialization and design methods for inducing form through textile material behavior
doi	https://doi.org/10.52842/conf.acadia.2014.267
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 267-276
summary	This paper presents research in developing materials with integrated pre-stressed textile and rigid composite properties. Such a material system, termed Pre-stressed Textile-Reinforced Composites (pTRC), produces forms with great degrees of both 3-dimensional and structural differentiation, from flat form-work in combination with a curated composite forming process.
keywords	Pre-stressed Textile-reinforced Composites, Textile Hybrid, Material Behavior, Form-finding, Spring-based Simulation.Category: Material Logics and Tectonics.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	acadia14projects_189
id	acadia14projects_189
authors	Alkanoglu, Volkan
year	2014
title	Distortion
doi	https://doi.org/10.52842/conf.acadia.2014.189.2
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 189-192
summary	The design of this 3-dimensional installation is based on a single surface structural system. It represents spatial connectivity, ephemeral visual effects, and historic references of Fenton Hall's previous programmatic use. The installation synthesizes a spatial link of levels through both visual and physical connections
keywords	Digital Craft, digital fabrication and construction
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:54

_id	sigradi2014_021
id	sigradi2014_021
authors	Araujo, André L.; Wilson Barbosa Neto, Gabriela Celani
year	2014
title	Treliças espaciais metálicas: combinação de parâmetros formais e materiais nos estágios iniciais do processo de projeto [Spatial steel trusses: Integrating structural pre-dimensioning requirements in the early stages of the parametric design]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 355-359
summary	The integration of structural considerations in architectural geometry processing is among the topics most discussed in the complex shapes design. While some design tools allow the designer to begin with an inefficient form and then turn it into a more efficient one, other tools allow exploring and creating structural forms considering both formal and structural aspects from the beginning. This paper presents a parametric design approach to create spatial steel trusses with the combination of two strategies: (1) shell surface to set out structural elements; (2) cross section properties to ensure structural stability aspects. In this paper we discuss how the combination of these strategies can contribute to the use of parametric design techniques in the early stages of the design process, taking into account both structural optimization and production aspects.
keywords	Structural design; Spatial Structures; Tubular trusses; Parametric Design; Dimensioning
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_036
id	ascaad2014_036
authors	Assassi, Abdelhalim; Belal Taher and Samai Rachida
year	2014
title	Intelligent Digital Craft to Recognize Spatial Installations for Residential Designs: Approach to Understand the Design of Housing Barbaric in Algeria using the Majali Composition Software
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 195-196; 443-456
summary	Architecture took an evolutionary context over time, where designers were interested in finding pragmatic spontaneous appropriate solutions and met the needs of people in urban and architectural spaces. Whereas, in modern architecture an intense and varied competition happens between architects through various currents of thoughts , schools and movements, however, that creativity was the ultimate goal , and a the same time we find that every architect distinguishes himself individually or collectively through tools of architectural expression and design representation adopting a school of thought, using , for example, the leaves of various sizes and diverse technical drawing tools to accurately show that he can be read by professionals or craftsmen outside the geographical scope to which it belongs .With the rapid technological development which accompanied the digital craft in the contemporary world , The digital craft summed up time, distance and tools , so they gave the concept more appropriate accuracy , as virtualization has become the most effective tool for Architecture To reach the ideal and typical results at the practical level, or pure research. At the level of residential design and on the grounds that housing plays an important role in the government policies and given that housing is a basic unit common to all urban communities on earth , the use of different programs to show its typicality in two dimensions or in the third dimension - for example, using software "AutoCAD " " 3D Max " , " ArchiCAD " ... etc. - gave virtualisation smart, creative and beautiful forms which lead to better understand the used /or to be used residential spaces, and thus the conclusion that the life system of dwelling under design or under study , as can specifically recognize spatial structure in housing design - using digital software applying "Space Syntax" for example - in the shadow of slowly growing digital and creative development with the help of high-speed computers . the morphological structure of the dwelling is considered to be the most important contemporary residential designs Investigation through which the researcher in this area aims to understand the various behavioral relations and social structures within the projected residential area, using Space Syntax techniques. Through the structural morphology of dwellings can be inferred quality networks, levels of connectivity and depth and places of openness or closure within the dwelling under study, or under design. How, then, have intelligently contributed this digital craft to the perception of those spatial fixtures ? The aim of this research is to apply an appropriate program in the field of vernacular residential design and notably Space syntax which relate to the understanding and analysis of spatial structures, and also demonstrate its role at the morphological and spatial structure aspects, and prove how effective it helps to understand the social logic of domestic space through social individual/collective relationships and behaviors projected on the spatial configurations of dwellings. The answer to the issue raised above and at the methodological aspect, the study discussed the application of space syntax techniques on the subject. The findings tend to prove the efficiency by comparing samples of Berber vernacular domestic spaces from the Mzab, the Aures and Kabilya in Algeria, and has also led to ascertain the intelligibility of space syntax techniques in reading the differences between the behaviors in domestic spaces in different areas of the sample through long periods of time .
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:39

_id	ecaade2014_022
id	ecaade2014_022
authors	Asterios Agkathidis and Tuba Kocaturk
year	2014
title	Deceptive Landscape Installation - Algorithmic patterning strategies for a small pavilion
doi	https://doi.org/10.52842/conf.ecaade.2014.2.071
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 71-79
summary	This paper reflects a collaborative, research led design project, aiming to explore the potentials offered by incorporating parametric / generative tools and performative lighting simulation software in order to design and fabricate a small pavilion for the School of Architecture. The Deceptive Landscape pavilion was designed in the framework of a masters level, research led, and collaborative design studio. During its intense 12 weeks schedule, student teams were asked to explore and apply generative / parametric tools such as Rhino and Grasshopper, in order to design and later construct a small pavilion, with a theme of their choice. In addition, each team was asked to optimise their design proposal by embedding environmental software plug-ins (e.g. DIVA for Rhino) in their design process, thereby aiming to re-inform their parametric models and set performance targets. Finally each team was expected to propose a file to factory fabrication technique, following all constrains of a limited, predetermined budget. The most convincing and consistent proposal, was then chosen for fabrication. The finalised project serves as verification of the effectiveness of the design system and teaching methods used.
wos	WOS:000361385100006
keywords	Generative design, parametric design, pavilion installation, fabrication;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201412307
id	ijac201412307
authors	Baerlecken, Daniel; Katherine Blair Wright
year	2014
title	Nominalized Matter: Agency of Material
source	International Journal of Architectural Computing vol. 12 - no. 3, 339-356
summary	This paper investigates making as a process that brings together diverse materials and combines their flow in anticipation of what might emerge. Ingold calls this approach the textility of making, which gives priority to the formation of materials as a process, in which form is generated through interventions within fields of forces and currents of materials - not through a predefined notion of an ideal outcome. The approach opposes the Aristotelian hylomorphic approach, which focuses on final products. This paper investigates textiles techniques and their potential for simultaneously creating ornamental and structural systems. This work is conducted through a sequence of architecture design studios, producing the case studies found in this paper. Within the paper different examples of textile systems are introduced ranging from a Semperian approach (wall as dress) to form finding experiments with active textile materials - demonstrating the potential for methods utilizing material agency to inform architectural design
series	journal
last changed	2019/05/24 09:55

_id	caadria2014_226
id	caadria2014_226
authors	Barrios, Carlos R.
year	2014
title	Parametric Visualization and Navigation in Multidimensional Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.543
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 543–552
summary	This paper presents a visual model to increase visualization and efficiency when working with parametric models. The formalistic model allows to visually track all possible variations of parameters in a logical structure showing all design variations at once. The paper introduces background information on typical arrangements of parametric modeling instances showing their limitations; presents the formalistic model for logical arrangement in multidimensional structures showing its advantages; and discusses an example of the application of the formalistic model showing a logical arrangements of designs in a hypercube matrix.
keywords	Parametric Modeling; Parametric Design; Parametric Variations, Parametric Visualization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_170
id	caadria2014_170
authors	Beirão, José Nuno; André Chaszar and Ljiljana _avi_
year	2014
title	Convex- and Solid-Void Models for Analysis and Classification of Public Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.253
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 253–262
summary	In this paper a semiautomated morphological classification of urban space is addressed systematically by sorting through the volumetric shapes of public spaces represented as 3-dimensional convex and solid voids. The motivation of this approach comes from a frequent criticism of space syntax methods for lacking information on how buildings and terrain morphology influence the perception and use of public spaces in general and streets in particular. To solve this problem information on how façades relate with streets and especially information about the facades’ height should be considered essential to produce a richer and more accurate morphological analysis of street canyons and other open spaces. Parametric modelling of convex voids broadens the hitherto known concept of two-dimensional convex spaces considering surrounding facades’ height and topography as important inputs for volumetric representation of urban space. The method explores the analytic potentials of ‘convex voids’ and ‘solid voids’ in describing characteristics of open public spaces such as containment, openness, enclosure, and perceived enclosure, and using these metrics to analyse and classify urban open spaces.
keywords	Open public space; convex voids; solid voids; user-guided feature recognition
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_207
id	caadria2014_207
authors	Beorkrem, Christopher and Charles Davis II
year	2014
title	A Primitive Parametric
doi	https://doi.org/10.52842/conf.caadria.2014.893
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 893–902
summary	This paper describes the products of an exhibition organized by the authors that speculatively reconstructed the ‘long history’ of Architectural Biology to recover the cultural potential of biological metaphors in contemporary architecture. The extended historical timeline of the show spanned from the second half of the nineteenth century to the present. However, in contrast to previous shows that have isolated modern architects’ interests in the formalist principles of biology, this show examined the formal and cultural prerogatives of modern architects in tandem with one another. This historical framework encouraged the speculative analysis of the social and political relevance of contemporary claims, which inherently challenges the ahistorical bias of the postcritical debates that emerged in the new millennium. Widening our gaze to examine the ‘long history’ of biological metaphors in architecture enabled us to recuperate the cultural significance that biological references have accrued within the discipline of architecture. This disciplinary history promises to repair the historical amnesia that has beset contemporary architects who limit their analysis of biology to formalist principles of design. A key component of the exhibit was the conceptual pairing of the ‘primitive’ (cultural) concerns of nineteenth-century figures with the ‘parametric’ (formal) concerns of postwar and contemporary architects. Using Gottfried Semper as a representative figure for the former position, we reinterpreted the inherent cultural meaning of postwar and contemporary architectural works, including those completed by Frei Otto, Achim Menges, Lars Spuybroek, SHoP, and Evan Douglis. The material potential of this approach was expressed in the making of analytical maps, digital models, and conceptual drawings that explored the latent ‘primitive’ themes of contemporary ‘parametric’ designs.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_338
id	sigradi2014_338
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva, Luisa Rodrigues Félix Dalla Vecchia
year	2014
title	A parametrização como experiência prévia para a estruturação de métodos projetuais em arquitetura [Parametrization as previous experience for structuring design methods in Architecture]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 297-301
summary	This study describes a didactic method for the introduction of parametric design in graphic and digital geometry courses in architectural training. It started with the recognition of the concept of parametric design and the investment in the appropriation of Grasshopper associated with Rhinoceros. Paper folding exercises were configured both physically and in the digital space. Through an interactive dynamic between traditional processes, by hand and digital, and parametric design, a learning path was defined in a playful manner which highlights the differences between methods of representation and its implications for the design action starting from a first semester of training.
keywords	Parametric Design; Teaching/learning; Graphic and Digital Geometry; Architecture; Paper Folding
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: