Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 386

Reformat results as: short short into frame detailed detailed into frame

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2014_053
id	ecaade2014_053
authors	Baris Cokcan, Johannes Braumann and Sigrid Brell-Cokcan
year	2014
title	Performative Wood
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2014.2.131
wos	WOS:000361385100013
summary	This research builds upon projects from both university and practice to explore new approaches on how the multifunctionality, flexibility, and performance of wood can be utilized to inform new approaches towards both design and fabrication. The following projects use physical prototypes to bend wood just within its tolerances, design with the high precision of multi-axis robotic fabrication in mind, and finally inform the shape of a large free-form structure through material properties.
keywords	Wood; high-performance material; cnc; robotic fabrication; geometric design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_167
id	ecaade2014_167
authors	Pavlos Fereos and Marios Tsiliakos
year	2014
title	Isoprototyping - Rapid Robotic Aided Fabrication for Double Curvature Surfaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 433-443
doi	https://doi.org/10.52842/conf.ecaade.2014.1.433
wos	WOS:000361384700043
summary	IsoPrototyping is a research initiative, undertaken at the Institute fur experimentelle architektur.hochbau, within the context of the Vertiefung Hochbau and Sonderkapitel des hochbaus courses, which specialize on building construction. Through the case study of an iso-surface spatial configuration, this research targets the exploration of innovative digital prototyping methodologies, that would allow rapid and cost-efficient fabrication, capable of manufacturing any given double curved surface. The ABB industrial robots of REX-Lab programmed in combination with custom designed, recalibrated dry-mold, surface-producing apparatus, formed the framework for a proficient, yet flexible, process describing and fabricating implicit non-linear systems.
keywords	Industrial robots; pin-board; rapid-prototyping; dry-recalibrated mould; digital-fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2022_431
id	ecaade2022_431
authors	Sieder-Semlitsch, Jakob and Nicholas, Paul
year	2022
title	Self-Serveying Multi-Robot System for Remote Deposition Modelling
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 233–240
doi	https://doi.org/10.52842/conf.ecaade.2022.1.233
summary	The need for increased automation of the AEC sector has been extensively documented within the architectural discipline over recent years. Far beyond economic perspectives, current advances in technology offer an increased and more direct implementation of sustainable materials. Within this research, the potential for the re-use of material with low embodied energy within automated construction will be examined. Herefore, Remote Material Deposition (RDM, firstly described in Dörfler et al., 2014) is utilized as main fabrication method, deploying varying compositions of local building debris, lime mortar, and sand, via a throwing arm. This research explores a method of continuous verification of material deployment and removal of material oversaturation to guarantee accuracy. Herefore, all instances of the robot ecology are in direct communication with one another and the user for verification, adaptation, and information. The proposed framework is examined through experimentation by designing, building, and implementing an inter-communicative network of bespoke semi-autonomous robots with all proposed parts of the system.
keywords	Construction Automation, Material Reuse, Onsite Construction, Self Verifying System, Robot Ecology, Additive Manufacturing
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2014_069
id	caadria2014_069
authors	Sosa, Ricardo; Qinqi Xu and Rajesh Elara Mohan
year	2014
title	The House That Roomba Built
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 647–656
doi	https://doi.org/10.52842/conf.caadria.2014.647
summary	The "Roomba House" (RH) is a novel generative design approach based on robotic interaction with the physical environment in order to inductively identify design opportunities for improving the design of future robot-inclusive spaces and furniture. The paper presents the theoretical and technological details of this approach, an empirical study of a cleaning robot and sample results from an evolutionary system inspired by heuristics inductively derived from the study. RH is an informed provocation based on the recognition that increasingly widespread domestic robots that roam our living spaces will infer key features and help produce creative design solutions that maintain or improve user requirements while improving their inclusiveness in everyday life.
keywords	Robots, evolutionary creativity, computational creativity
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2014_271
id	sigradi2014_271
authors	Alvarez, Marcelo Paysse
year	2014
title	Relevamiento con drones; el caso Real de San Carlos [Drone mapping; case study: Real de San Carlos]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 649-652
summary	Cultural landscapes, although complex realities, give shape and meaning to the tangible and intangible components which form the foundations of human cultural background. The architecture of the city of Colonia del Sacramento fits within this context, and builds up a unique cultural landscape inserted in the logic of the historical heritage protection system. This concept, which implies wealth but also conflicts, demands a multidisciplinary approach grounded on a wide vision of this issue. Likewise, this comprehensive approach contributes to reverse and correct the lack of capacity and/or interest to save these examples of man-made landscape (prefabrication, mega-projects of the beginnings of the 20th Century, etc.), which are essential pieces of heritage conservation. Since 1943 the bullring is owned by the Municipality of Colonia. In the last decade the building was fenced to prevent breakdown risk. Still, illegal access occurs quite easily, increasing the risk and potential damage, in addition to the spoilage caused by more than one hundred years of inactivity and lack of maintenance. This paper proposes a method to survey and record the current status of the building, from photos taken by unmanned aerial vehicles (UAV, drones), allowing the registry without the need of direct access to the site. The survey will enable three types of results: series of mapped photographs, 3D models and an interactive platform for aerial view. The aim is to provide valuable and essential documentation for next stages of consolidation works, competitions and eventualy, new uses of the heritage building.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2014_279
id	caadria2014_279
authors	Austern, Guy; Soungmin Yu, Mara Moral and Theerapat Jirathiyut
year	2014
title	The Urban Genome
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 263–272
doi	https://doi.org/10.52842/conf.caadria.2014.263
summary	The influence of urban morphology on the energy consumption of a fabric has been recently established by research into the energy use of existing cities. This paper suggests a framework for generating environmentally adapted urban tissue by using genetic algorithms as form-finding processes. A series of multi-objective optimization algorithms are described. The geometric abstractions used as a basis for these algorithms are illustrated in detail, and the results and implications of these types of simulations are discussed. The methodology developed within this paper was tested on one km2 site in three cities of varying climates, and further expanded into a detailed case study within one city.
keywords	Urban simulation; Environmental design; Optimization; Genetic Algorithms; Urban Morphology
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_047
id	caadria2014_047
authors	Dickinson, Susannah and Sheehan Wachter
year	2014
title	Nature as a Comprehensive Model: A Biomimetic Installation
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 627–636
doi	https://doi.org/10.52842/conf.caadria.2014.627
summary	The following group installation was part of a seminar on biomimetics at the University of Arizona, USA. The design began with research into various natural systems, namely cell growth and morphogenesis and digital tools. In nature cells contain preprogrammed responses based on intrinsic properties which allow for differentiation and adaptation to external forces. This logic of cell morphology was developed into the installation design. Form specificity and topological variation was developed through the manipulation of a material system, bending and loading identical components to adapt to external forces, such as the sun, while simultaneously navigating the site, providing structure and ultimately architectural space.
keywords	Biomimetics; pedagogy; simulation; design/build
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia14projects_185
id	acadia14projects_185
authors	Hell, Ula; Kehne, Holger; Pichler, Peter
year	2014
title	Lamellar Flows: Digitally Conceived Building Skins
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 185-188
doi	https://doi.org/10.52842/conf.acadia.2014.185
summary	Digital design strategies usually create differentiation and formal complexities in relatively defined and encapsulated settings. This project focuses less on form itself but on the processes of convergence between site, material, structure, function and construction to be forged and calibrated as one specific material system.
keywords	parallel, convergence, lamellar, material system, morphology, timber
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:49

_id	caadria2014_184
id	caadria2014_184
authors	Janssen, Patrick and Vignesh Kaushik
year	2014
title	Plot Packing
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 533–542
doi	https://doi.org/10.52842/conf.caadria.2014.533
summary	Generative design tools can accelerate the optioneering process by allowing designers to quickly generate large numbers of design variants, thereby enabling a wider and more thorough exploration to be conducted. This paper focuses on procedures for generating inner city street networks and city block massing studies for sites within existing urban areas. A novel procedure is proposed that is capable of subdividing complex non-orthogonal sites into similarly sized well-formed plots and subsequently further subdividing these plots into sizes appropriate for selected city block typologies. The application of the procedure is demonstrated on a site in Singapore.
keywords	Urban optioneering; street networks; parametric urbanism; quadrilateral mesh generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2014_526
id	caadria2014_526
authors	Leidi, Michele and Arno Schlüter
year	2014
title	Conceiving Design Schemes of Urban Architecture Through Volumetric Site Analysis
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 963–964
doi	https://doi.org/10.52842/conf.caadria.2014.963
series	CAADRIA
type	poster
email
last changed	2022/06/07 07:52

_id	caadria2014_171
id	caadria2014_171
authors	Lo, Chia-Hui and Teng-Wen Chang
year	2014
title	Lily: Developing a Contextual Idea Linking Tool for Designing on Site
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 667–676
doi	https://doi.org/10.52842/conf.caadria.2014.667
summary	This research develops a supporting tool (Lily) to inspire designer generates relevant ideas while he or she is on site visiting. This mobile application has been developed via scenario-based design paradigm and testing experiment. Based on the analysis of the interaction process from experiment observation, the visualization is comprised of both the physical information (site) and virtual information (linking form idea pieces) that is implemented based on the Location-Based technology with iOS application platform. An implementation called Lily.
keywords	Mobile; idea linking; on site; design tool
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2014_266
id	sigradi2014_266
authors	Lonsing, Werner; Peter Anders Ph.D.
year	2014
title	Portable Architectural Design - Developing a Immersive Augmented Reality System for Architects
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 166-169
summary	The architectural design process is, besides sketching, bound to the office. The introduction of computational design did not really change it. This paper will introduce and discuss the development of an affordable solution for a wearable and immersive augmented-reality-system (AR) for architects based on simple hardware components with some essential options to create and edit three-dimensional virtual shapes while being on-site.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2014_102
id	caadria2014_102
authors	Lopes, João V.; Alexandra C. Paio and José P. Sousa
year	2014
title	Parametric Urban Models Based on Frei Otto’s Generative Form-Finding Processes
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 595–604
doi	https://doi.org/10.52842/conf.caadria.2014.595
summary	Presently there is a progressive tendency to incorporate parametric design strategies in urban planning and design. Although the computational technologies that allow it are recent, fundamental theories and thinking processes behind it can be traced back to the work conducted at the Institute for Lightweight Structures (IL) in Stuttgart, between the 1960’s and 1980’s. This paper describes an experimental urban research work based on Frei Otto and Eda Schaur's thoughts on unplanned settlements, and on the form-finding experiences carried out at IL. By exploring the digital development of parametric and algorithmic interactive models, two urban design proposals were developed for a site in Porto city. Out of this experience, this paper suggests that today the act of design can benefit from a deeper understanding of the natural processes of occupation and connection.
keywords	Parametric urbanism; generative design; form-finding; Frei Otto
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2014_013
id	caadria2014_013
authors	Moya, Rafael; Flora Salim and Mani Williams
year	2014
title	Pneumosense Project
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 369–378
doi	https://doi.org/10.52842/conf.caadria.2014.369
summary	The study of wind conditions in the urban context has multiple application areas such as for cleaning pollution through ventilation, analysing wind pressures on building façades, and improving pedestrian comfort. In this context, the Pneumosense project is a student’s project focused in the design of a kinetic system to ameliorate negative impact of wind conditions in pedestrian areas in the city of Melbourne. Its development considers several stages including site analysis, analogue wind tunnel testing, digital simulations with Computational Fluid Dynamic software, material explorations, kinetic component design with Arduino, and rapid prototyping.
keywords	Urban aerodynamics; windbreak; wind tunnel simulation; computational fluid dynamics; architectural prototype
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2014_199
id	ecaade2014_199
authors	Nancy Diniz and Hai-Ning Liang
year	2014
title	A Mobile Sensing Kit for Urban Analysis - For more legible, quantifiable intangible and temporary data
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 63-70
doi	https://doi.org/10.52842/conf.ecaade.2014.1.063
wos	WOS:000361384700005
summary	This paper describes the design and testing of a mobile sensing kit for real-timeurban site analysis. It aims to contribute to a discussion on the importance ofsensing-based mapping of urban phenomena following our assertion that current delivery of urban analysis methodologies, with their emphasis on visuo-spatialanalysis only, fail to create maps that reflect the nuanced and layered interrelationships between the people and the physical environmental space they live in. In essence, the paper will bring to light the set up components and deployment of a mobile sensing kit that allows for usually mapped static invisible data (air quality, temperature, humidity) to be mapped as visible data. In other words, we want to explore how real-time geo-referenced data collection can enhance traditional data mapping and visualization methods enabling designers to understand better the urban space.
keywords	Environmental data collection; mobile sensing; intangible data collection and visualization; city modeling; site surveying with open hardware; diy electronics
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac201412103
id	ijac201412103
authors	Park, Ju Hong; Takehiko Nagakura
year	2014
title	A Thousand BIM: A rapid value-simulation approach to developing a BIM tool for supporting collaboration during schematic design
source	International Journal of Architectural Computing vol. 12 - no. 1, 47-60
summary	The purpose of this study is to develop a BIM-based plug-in that is able to assist a collaboration among heterogeneous professionals. The tool will enable them to communicate in the same language, articulate criteria and priorities in multiple perspectives, and to share rapidly simulated evaluations of schematic design variations. Among many barriers that block collaborations among professionals, a quintessential barrier in the building and design industries may be epistemological rather than physical. The professionally different ways of thinking, expertise, values, and priorities can be a block on the collaborative development process of architectural design projects. This paper takes the example of the relationship between developers and architects, who tend to have different evaluation criteria. A real-time value simulation tool is introduced as a means to generate possible building typologies on a given project site, with computation of expected total values expressed in simple financial terms.
series	journal
last changed	2019/05/24 09:55

For more results click below: