Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 631

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_112
id	ecaade2014_112
authors	Miguel Sales Dias, Sara Eloy, Miguel Carreiro, Elisângela Vilar, Sibila Marques, Ana Moural, Pedro Proênça, Joana Cruz, Jorge d'Alpuim, Nelson Carvalho, António Sérgio Azevedo and Tiago Pedro
year	2014
title	Space Perception in Virtual Environments - On how biometric sensing in virtual environments may give architects users's feedback
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 271-280
doi	https://doi.org/10.52842/conf.ecaade.2014.2.271
wos	WOS:000361385100029
summary	This paper focuses on the objective study of emotions, namely, fear induced by architectural spaces, by sensing and statistically analysing some physiological signals of users experiencing Virtual Environments (VE). For this, a virtual building was designed considering the presence of stairs and ramps as architectural elements that could affect users´ physiological states and perception of fear of falling. Thirty-one older persons participated in this study and were assigned to two experimental conditions (i.e., safe and unsafe conditions). Five main locations (beginning of the stairs; neutral room; first descending ramp; ascending ramp; and the middle of ascending ramp) were considered along the participants' path, and heart rate (HR) was collected in the vicinity of those locations. Results shown significant differences in HR activation among neutral, beginning of stairs and middle of ascending ramp. Despite the fact that the effect of condition was not fully verified for HR, participants reported more fear while interacting with the unsafe condition, with significant differences between conditions.
keywords	Virtual environments; space perception; biometric sensing; emotion; ambient assisted living; architecture design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia19_246
id	acadia19_246
authors	Zhang, Viola; Qian, William; Sabin, Jenny
year	2019
title	PolyBrickH2.0
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 246-257
doi	https://doi.org/10.52842/conf.acadia.2019.246
summary	This project emerged from collaborative trans-disciplinary research between architecture, engineering, biology, and materials science to generate novel applications in micro-scale 3D printed ceramics. Specifically, PolyBrick H2.0 adapts internal bone-based hydraulic networks through controlled water flow from 3D printed micro-textures and surface chemistry. Engagement across disciplines produced the PolyBrick series at the Sabin Lab (Sabin, Miller, and Cassab 2014) . The series is a manifestation of novel digital fabrication techniques, bioinspired design, materials inquiry, and contemporary evolutions of building materials. A new purpose for the brick is explored that is not solely focused on the mechanical constraints necessary for built masonry structures. PolyBrick H2.0 interweaves the intricacies of living systems (beings and environments combined) to create a more responsive and interactive material system. The PolyBrick 2.0 series looks at human bone as a design model for foundational research. PolyBrick H2.0 merges the cortical bone hydraulic network with new functionalities as a water filtration and collection system for self-preservation and conservation as well as passive cooling solutions. It also pushes the ability of 3D printing techniques to the microscale. These functionalities are investigated under context for a better construction material, but its use may extend further.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	ascaad2014_026
id	ascaad2014_026
authors	Al-Barqawi, Wadia
year	2014
title	Virtual Reality: an approach for building Makkah’s architectural identity
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 331-342
summary	This paper explores a new approach in the architectural design process aiming to construct Makkah's architectural identity. Makkah, which is a city of unique sacred values, has been losing its battle to preserve it heritage buildings. Traditional districts with their heritage buildings have been cleared in order to construct skyscrapers to accommodate the increasing number of pilgrims. While some argue for preserving heritage buildings others insist in building more skyscrapers. Within these conflicting views, architects and urban designers use CAD software to document heritage buildings without informing the future architectural design process. This paper argues for adopting digital architecture as an approach for preserving the architectural heritage of Makkah by studying heritage buildings as systems that can be digitally represented in virtual world. This goes beyond the physical representation of heritage artefacts to investigate in depth the logic that guide the design process. The roushan, which is one of the unique heritage artefacts in Makkan's architecture can be an interface between reality and the virtual environment in the design process. This goes behind modeling the roushan, to employ the principle of virtual representation in the design process. The digital representation of heritage becomes the realm for research transforming the virtual into reality. The hope is to produce an architecture that is related to its local heritage, contemporary in design and responsive to its environment, as well as to advocate principles, references and techniques at the core of the design process, in an educational and professional context. In broader picture the goal is to achieve a city that is responsive to human activities adapted to changes, sustainable in physical forms and social relations and above all unique in design and identity.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	cf2015_370
id	cf2015_370
authors	Kang, Julian; Campagnol, Gabriela;Caffey, Stephen and Clayton, Mark
year	2015
title	4D Construction Simulation Model of MASP
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 370-379.
summary	Building Information Modeling (BIM) is an effective tool students can use to learn how building components work together to secure necessary structural stability in the course of construction. In Summer 2014, students enrolled in the BIM class at Texas A&M University created a 4-dimensional construction simulation model of the Museu de Arte de São Paulo (MASP) to understand how the entire building is sustained by two huge concrete beams connected with four external columns. For this class project, students analyzed the building system while creating a 3-dimensional model of the museum. They also came up with a construction sequence that would best maintain structural integrity of the building in the course of construction, and then produced a short animation video explaining the MASP construction process. This paper presents how the MASP project helped students learn a unique building system and its construction sequence.
keywords	BIM, 4D Construction Simulation, MASP
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2014_109
id	ecaade2014_109
authors	Kristoffer Negendahl, Thomas Perkov and Alfred Heller
year	2014
title	Approaching Sentient Building Performance Simulation Systems
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 49-60
doi	https://doi.org/10.52842/conf.ecaade.2014.2.049
wos	WOS:000361385100004
summary	Building designers make decisions in early design stages that have large impact on building performance, including those of energy-, daylight- and indoor environment performance. Building performance simulation (BPS) tools can support the designer, in making better decisions, by providing the performance consequences of design choices. However BPS tools often require deep technical knowledge and is too time consuming to use to effectively support the design exploration in the early design stages. To solve this challenge, the current paper proposes: Sentient building performance simulation systems, which combine one or more high precision BPS tools to provide near instantaneous performance feedback directly in the design tool. Sentient BPS systems are essentially combining: 1) design tools, 2) parametric tools, 3) BPS tools, 4) dynamic databases 5) interpolation techniques and 6) prediction techniques as a fast and valid simulation system for the early design stage.
keywords	Building performance simulation; parametric modelling; visual programming language; database; responsive system; integrated dynamic model
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2014_015
id	ascaad2014_015
authors	Mueller, Volker
year	2014
title	Second Generation Prototype of a Design Performance Optimization Framework
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 199-209
summary	The integration of performance evaluation into the building design process becomes increasingly important in order to respond to demands on contemporary design with respect to the future of our built and natural environments. This paper presents work on the second iteration of an implementation of a design performance optimization framework that attempts to respond to the challenges of integrating analysis and optimization into the design process. Main challenges addressed are speed of feedback through implementation on the cloud, utilizing parallelization of computations and availability of results in the computational context of the model through leveraging the parametric nature of the application; The goal is to enable designers in their decision-making throughout the design process with focus on earlier phases of the design process during which changes can be implemented faster and at much lower costs than in later phases of design or even during construction and occupation.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_031
id	ascaad2014_031
authors	Roshanzamir, Shima and Morteza Farhadian Dehkordi
year	2014
title	A Model for Land Use Distribution Forecasting: To evaluate and negotiate with design scenarios
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 3853-394
summary	In designing and managing land use distribution, as a complex system, in addition to providing a visionary and intuitive strategy one should consider the rule based optimization processes and the internal autonomous forces. These ensure cities global eligibility besides their local efficiency and compatibility. This essay suggests a model to create negotiation between these two approaches. The tool is developed as an agent based model in a parametric environment and presented through a hypothetical case study. First, the system structure and behavior is defined and then through direct and indirect control tools, challenge was to achieve suggested design scenario without ignoring the self organizing behavior of agents.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac201412304
id	ijac201412304
authors	Pak, Burak; Johan Verbeke
year	2014
title	Geoweb 2.0 for Participatory Urban Design: Affordances and Critical Success Factors
source	International Journal of Architectural Computing vol. 12 - no. 3, 283-306
summary	In this paper, we discuss the affordances of open-source Geoweb 2.0 platforms to support the participatory design of urban projects in real-world practices. We first introduce the two open-source platforms used in our study for testing purposes. Then, based on evidence from five different field studies we identify five affordances of these platforms: conversations on alternative urban projects, citizen consultation, design empowerment, design studio learning and design research. We elaborate on these in detail and identify a key set of success factors for the facilitation of better practices in the future.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2014_018
id	ecaade2014_018
authors	Nils Seifert, Michael Mühlhaus, Gerhard Schubert, Dietrich Fink and Frank Petzold
year	2014
title	Decision support for inner-city development - An interactive customizable environment for decision-making processes in urban planning.
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 43-52
doi	https://doi.org/10.52842/conf.ecaade.2014.1.043
wos	WOS:000361384700003
summary	Re-densification of inner-city areas is a highly topical socio-political issue. In order to meet the increasing demand for centrally located living space, the cities have to amend building laws. At present, there are no analytical means of directly comparing and assessing different strategies and measures aimed at identifying the potential for internal development in specific urban quarters and learning about the consequences for the citizens. In this publication, we describe an interactive digital tool that monitors the key building codes and visualizes their effects on the urban structure in real-time, so that this can serve as an informed basis for debate and argumentation in the political decision-making and planning process, consequently supporting the development of re-densification strategies that are well-suited to their urban context.
keywords	Urban planning; redensification; decision support; visual programming; versioning
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2014_069
id	caadria2014_069
authors	Sosa, Ricardo; Qinqi Xu and Rajesh Elara Mohan
year	2014
title	The House That Roomba Built
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 647–656
doi	https://doi.org/10.52842/conf.caadria.2014.647
summary	The "Roomba House" (RH) is a novel generative design approach based on robotic interaction with the physical environment in order to inductively identify design opportunities for improving the design of future robot-inclusive spaces and furniture. The paper presents the theoretical and technological details of this approach, an empirical study of a cleaning robot and sample results from an evolutionary system inspired by heuristics inductively derived from the study. RH is an informed provocation based on the recognition that increasingly widespread domestic robots that roam our living spaces will infer key features and help produce creative design solutions that maintain or improve user requirements while improving their inclusiveness in everyday life.
keywords	Robots, evolutionary creativity, computational creativity
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2014_021
id	ecaade2014_021
authors	Aant van der Zee, Bauke de Vries and Theo Salet
year	2014
title	From rapid prototyping to automated manufacturing
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-461
doi	https://doi.org/10.52842/conf.ecaade.2014.1.455
wos	WOS:000361384700045
summary	In this paper we present an outline of a newly started project to develop a tool which connects BIM to a manufacturing technique like 3D printing. First we will look some promising manufacturing techniques. We will design a small dwelling and export it into a BIM, from which we will extract our data to generate the path the nozzle has to follow. The chosen path is constrained by the material properties, the design and speed of the nozzle. To validate the system we develop a small VR tool in which we mimic a manufacturing tool.
keywords	Rapid prototyping; rapid manufacturing; robotics; automation; building information model (bim)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_037
id	ascaad2014_037
authors	Al-Tuhafi, Assda A. and Nasma M. Thabit
year	2014
title	The Methodology of Teaching Computer-Aided Architectural Design in the Department of Architecture in Mosul University
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 271; 457-469
summary	Several architectural studies tackled the methodologies of teaching the architectural design subject in general and their relation to the use of computer in particular. The trends varied in accordance with the research that is relevant to the subject due to its importance in generating new architectural models, but it didn’t crystallize a theoretical framework that identifies clear and specific vocabularies related to the methodology of teaching the computer-aided architectural design. The current study discusses the importance of this concept in an attempt to explore the particular problem represented by the non-clarity of this methodology in the department of architecture in Mosul University. Therefore, the problem of the research crystallized and its objective and its methodology were identified and this was represented by constructing a theoretical framework which includes several main items. Then the theoretical framework was applied to selected projects of architectural department students in order to manifest the particularity of teaching the computer-aided architectural design. Results showed the distinction of this department as this methodology led to the derivation of different architectural products in accordance with the particular effects using the computer technologies. The results also manifested the change in the architectural design trend that was caused due to the digital intervention in the way of the student's thinking from one hand and the components and the elements of the building from the other hand that the quality of the design can be improved by using the computer and the quantity will be more in shorter time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_020
id	ascaad2014_020
authors	Dickinson, Susannah
year	2014
title	Integrated Digital Pedagogy
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 263-270
summary	This paper seeks to question how the academy should position itself in this changing environment of Building Information Modeling (BIM), providing a critical analysis of how digital design education is taught. The pedagogical goals of the digital communication stream at the University of Arizona will be addressed; in part discussing the implementation of relevant software and techniques in appropriate venues in a specific class, stream and the curriculum as a whole.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

For more results click below: