Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 663

Reformat results as: short short into frame detailed detailed into frame

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia16_424
id	acadia16_424
authors	Twose, Simon; du Chatenier, Rosa
year	2016
title	Experimental Material Research - Digital Chocolate
doi	https://doi.org/10.52842/conf.acadia.2016.424
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 424-431
summary	This research investigates the aesthetics of a shared agency between humans, computation and physical material. ‘Chocolate’ is manipulated in physical and virtual space simultaneously to extract aesthetic conditions that are a sum of human and non-human relations. This is an attempt to further the knowledge of designing, giving physical and digital materials force in determining their own aesthetics. The research springs from work in speculative aesthetics, particularly N. Katherine Hayles’s OOI (object-oriented inquiry) and Graham Harman’s OOO (object-oriented ontology) and explores how these ideas impact contemporary computational architectural design. To study this, a simple material has been chosen, chocolate, and used as a vehicle to investigate the dynamics of physical and digital materials and their shared/differing ‘resistances to human manipulation’ (Pickering 1995). Digital chocolate is ‘melted’ through virtual heat, and the results printed and cast in real chocolate, to be further manipulated in real space. The resistances and feedback of physical and digital chocolate to human ‘prodding’ (Hayles 2014) are analyzed in terms of a material’s qualities and tendencies in digital space versus those in physical space. Observations from this process are used to speculate on an aesthetics where humans, computation and physical material are mutually agential. This research is a pilot for a larger study taking on more complex conditions, such as building and cities, with a view to broadening how aesthetics is understood in architectural design. The contribution of this research to the field of architectural computation is thus in areas of aesthetic speculation and human/non-human architectural authorship.
keywords	object-oriented inquiry, speculative aesthetics, mutual agency, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	sigradi2014_282
id	sigradi2014_282
authors	Kerestes, James
year	2014
title	Design Out of Necessity - Architectural Approach to Extreme Climatic Conditions
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 130-133
summary	This paper is the culmination of the first phase of research in the development of adaptive surface conditions which can mitigate extreme climatic scenarios, specifically air pollution. How can the discipline of architecture address worst-case climate scenarios within inhabitable structures? The question asked throughout this case study and research project was essentially based on a critique of the architectural community’s utilization of sustainable technologies in design, and whether current design initiatives were in fact aggressive enough in their approach to “green” building. While assessing the probable environmental changes likely to affect the architectural discipline in the future, this research project developed computational simulations of polluted atmospheres in order to develop surfaces which would respond formally.
keywords	Adaptive; Behavioral; Responsive; Ecological; Generative
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2021_291
id	caadria2021_291
authors	Bansal, Medha and Erdine, Elif
year	2021
title	Bio-Mineralisation And In-Situ Fabrication Of In-Dune Spaces: Case Study Of Thar Desert
doi	https://doi.org/10.52842/conf.caadria.2021.1.493
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 493-502
summary	Desertification has made large productive landscapes in the South-west Thar desert redundant, subjected people to migration and induced a constant influx of sand into the region (Singhvi and Amal, 2014). The abundance of sand creates an opportunity to adopt an existing technique, Bio-mineralisation, to develop a sand based composite material which, when treated with a construction binder like sodium alginate, can be used for engineering purposes. The paper sets a theoretical framework to develop a fabrication mechanism with microbial-grout injections and propose the development of in-dune/underground assembly of habitable spaces. Each of the sub-components of material system, fabrication mechanism and In-dune structures are detailed, and evaluated to devise a hierarchy between them. Their interdependencies together inform design strategies, a phasing plan and global time scale for overall terrain transformation.
keywords	Bio-mineralisation; Bio-grouting; In-dune fabrication; Tool path algorithms; Micro-climate analysis
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_201
id	caadria2014_201
authors	Cabrinha, Mark N.
year	2014
title	Lattice Shell Methodologies
doi	https://doi.org/10.52842/conf.caadria.2014.191
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 191–200
summary	This paper outlines a working methodology for the parametric development of lattice shell structures combining surface topology and form-finding with the material constraints of straight lath members woven into a geodesic network. By employing non-uniform grid spacing, a wider typology of spatial types can be employed than can be achieved with traditional flat-matt lattice shell construction. As a parametric design tool and working methodology, some of the heavy lifting in form-finding and geodesic analysis can be off-loaded to the tool, such that a more comprehensive attention can be placed on other design criteria such as spatial development and environmental response while maintaining the elegance and economy of lattice shells.
keywords	gridshells; geodesics; form-finding; bending-active structures; wood; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia14_661
id	acadia14_661
authors	Corazza, Marco; Doshi, Viral; Korner, Axel; Tabassun, Mehnaj
year	2014
title	Fiber Composite Fabrication: Experimental Methods of Architectural Applications
doi	https://doi.org/10.52842/conf.acadia.2014.661
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 661-670
summary	Due to availability and the production costs of current fabrication methods, fiber reinforced composites are used primarily in specialized fields with limited applications in architecture. The aim of the research is to present an exploration in low-tech fabrication techniques in conjunction with geometrical optimization of a large-scale typology within extreme environmental conditions.
keywords	fiber composites, digital fabrication, material computation, computational fluid dynamics, shell structures, structural optimization
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ascaad2014_025
id	ascaad2014_025
authors	Elias-Ozkan, Soofia T. and Hatem Hadia
year	2014
title	Teaching and Learning Building Performance Virtualisation
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 323-330
summary	Building performance simulation tools have indeed eased the task of evaluating a building’s performance from the point of view of lighting design, heating and cooling loads, total energy loads, acoustic properties, natural lighting, ventilation, smoke and fire containment etc. However, to use these tools correctly, not only is theoretical knowledge required but also insight that can only be attained after substantial experience. For example, in order to evaluate the thermal performance alone, one needs to understand climatology, material properties, building physics, HVAC systems, internal and external gain factors, solar impacts, etc. to name a few. Hence, teaching students of Architecture how to use these tools, and also to interpret the results properly, is a tall order. This paper reports on insights gained through teaching courses on building performance simulations to graduate students in the Department of Architecture. The course content was varied each term and a different simulation software was used; namely: ECOTECT, Energy Plus and Design Builder. Data presented here will also contain feedback from the course students regarding the modelling process of the buildings, inputting the data, simulating their performance, and evaluating the results. Also, the difficulties faced during the various steps as well as the drawbacks of the tools will be discussed in depth.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:36

_id	ecaade2014_225
id	ecaade2014_225
authors	Kostas Grigoriadis
year	2014
title	Material Fusion - A research into the simulated blending of materials using particle systems
doi	https://doi.org/10.52842/conf.ecaade.2014.2.123
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 123-130
summary	Parallel to the early development and recent widespread usage of composite materials in building and manufacturing, the concept of functionally graded materials (FGM) was initiated and developed as far back as the 1980s. In contrast to the composite paradigm, where layers of materials are glued and 'cooked' together under high pressure and temperature to form laminated parts, FGM are singular materials that vary their consistency gradually over their volume. In direct link to their increasing use in fields adjacent to architecture, the scope of the paper is to explore a possible design route for designing with FGM. Of a limited number of available CAD software where material properties can be graded, the intent of the design for a materially graded windbreak module is to utilize particle systems as a technique for simulating fields of interacting, information-loaded material point sets that can be fused together in a gradient manner.
wos	WOS:000361385100012
keywords	Functionally graded materials; particle system elements
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia23_v2_294
id	acadia23_v2_294
authors	Matharu, Sumer; Crawford, Joe; Ohakim, Ugonna
year	2023
title	Techno Relics: A Framework for Computation, Materiality, and Fabrication in the Anthropocene
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 294-303.
summary	This paper explores the potential of material, computation, and fabrication methodologies broadly engaging a critical understanding of the human epoch, also known as the anthro- pocene era, and its impact on Earth’s geology. Man-made materials have arguably become ubiquitous and a massively distributed part of the environment, while also placing an involuntary burden on local ecologies. Nature has taken its course and swallowed these synthetic materials to create new compositions of complex conglomerations, thereby blur- ring the boundaries between the agency of man, nature, and technology (Corcoran et al. 2014). The discipline of architecture, too, must reconsider its own boundaries, and evolve to design and fabricate with these techno relics, defined here as a remnant of the techno- logical impact on our planet. In order to understand how these techno relics can be used by designers, this paper pres- ents a general framework for the research, discovery, and validation of computational and fabrication processes. This is done through the examination of the background research in using aluminum waste by leveraging pre-existing digital and physical processes. Furthermore, the paper situates the background work within the broader context of how these techno relics can be mined, or collected. This is done through the examination of a case study that follows plastic waste in the Pacific Northwest through an Indigenous lens, providing possible architectural solutions that are relevant to the building typology in the remote communities most affected.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	caadria2014_013
id	caadria2014_013
authors	Moya, Rafael; Flora Salim and Mani Williams
year	2014
title	Pneumosense Project
doi	https://doi.org/10.52842/conf.caadria.2014.369
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 369–378
summary	The study of wind conditions in the urban context has multiple application areas such as for cleaning pollution through ventilation, analysing wind pressures on building façades, and improving pedestrian comfort. In this context, the Pneumosense project is a student’s project focused in the design of a kinetic system to ameliorate negative impact of wind conditions in pedestrian areas in the city of Melbourne. Its development considers several stages including site analysis, analogue wind tunnel testing, digital simulations with Computational Fluid Dynamic software, material explorations, kinetic component design with Arduino, and rapid prototyping.
keywords	Urban aerodynamics; windbreak; wind tunnel simulation; computational fluid dynamics; architectural prototype
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	ecaade2014_239
id	ecaade2014_239
authors	Pedro Filipe Martins and José Pedro Sousa
year	2014
title	Digital Fabrication Technology in Concrete Architecture
doi	https://doi.org/10.52842/conf.ecaade.2014.1.475
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 475-484
summary	Technological innovation has been an important driving force in architecture, enabling and inspiring architects and engineers by giving them new tools for solving existing problems. In the last two decades, the exploration of digital design and fabrication technologies has stimulated the development of a variety of interests and strategies to materialize increasingly complex and customized solutions in architecture, with traditional building materials. Reinforced concrete is the most widely used material in the building industry today and throughout its history has been the subject of vast research into its performance as a construction material and its tectonic potential in architecture. As such, the introduction of digital fabrication processes in concrete construction represents the biggest prospect for renovation of our built environment and at the same time, presents particular difficulties and opportunities, which are now being addressed. In an effort to investigate the alternative design and material possibilities in concrete emerging from the use of digital fabrication technologies in architecture, this paper proposes a focused view of digital fabrication applied to concrete construction with two areas of research. By framing the research in the context of reference works in concrete architecture of the 20th century, this paper describes and illustrates taxonomy of existing and possible types of integration of digital fabrication technologies in concrete architecture in the realms of Practice and Research.This characterization allows the authors to frame the relation between material, technology and architecture in different environments regarding the same material, extracting a clear image of existing processes, their potential and shortcomings, as well as expectations for future developments.
wos	WOS:000361384700047
keywords	Digital fabrication; concrete; cam; robotics; sustainability
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2014_263
id	sigradi2014_263
authors	Wit, Andrew John
year	2014
title	Towards an Intelligent Architecture “Creating Adaptive Building Systems for Inhabitation”
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 328-332
summary	Existing typologies of emergency housing rely heavily on conventional designs, materials and labor-intensive construction methodologies, which in post-disaster environments place large amounts of strain on the surrounding communities, material manufacturers and financial systems. With ever more unpredictable environmental conditions, should our new housing prototypes not also have the ability to simultaneously adapt to rapidly changing environmental conditions? This paper investigates the potential of developing a new typology of rapidly deployable emergency housing prototypes through the creation of a system which relies on embedded design intelligence, advanced fabrication and adaptable systems, rather than attempting to make existing building systems smarter.
keywords	Adaptable; Housing; Skin; Robotics; Pneumatic
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	acadia19_246
id	acadia19_246
authors	Zhang, Viola; Qian, William; Sabin, Jenny
year	2019
title	PolyBrickH2.0
doi	https://doi.org/10.52842/conf.acadia.2019.246
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 246-257
summary	This project emerged from collaborative trans-disciplinary research between architecture, engineering, biology, and materials science to generate novel applications in micro-scale 3D printed ceramics. Specifically, PolyBrick H2.0 adapts internal bone-based hydraulic networks through controlled water flow from 3D printed micro-textures and surface chemistry. Engagement across disciplines produced the PolyBrick series at the Sabin Lab (Sabin, Miller, and Cassab 2014) . The series is a manifestation of novel digital fabrication techniques, bioinspired design, materials inquiry, and contemporary evolutions of building materials. A new purpose for the brick is explored that is not solely focused on the mechanical constraints necessary for built masonry structures. PolyBrick H2.0 interweaves the intricacies of living systems (beings and environments combined) to create a more responsive and interactive material system. The PolyBrick 2.0 series looks at human bone as a design model for foundational research. PolyBrick H2.0 merges the cortical bone hydraulic network with new functionalities as a water filtration and collection system for self-preservation and conservation as well as passive cooling solutions. It also pushes the ability of 3D printing techniques to the microscale. These functionalities are investigated under context for a better construction material, but its use may extend further.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	sigradi2014_132
id	sigradi2014_132
authors	Hu, Yongheng; Qinying Li, Feng Yuang, Han Li
year	2014
title	The BIM based Responsive Environmental Performance Design Methodology
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 120-125
summary	The concept of “families” lies in the core of internal data structure in Building Information Modeling (BIM). The elements of this modeling platform are all associated with each other as parts of the “families”, independent of their geometrical structure, materiality, parametric dependencies or their physical connection to other elements. Through the associations introduced among the parameters of the ‘families’ members, this study aims at establishing a methodology for a multi-objective evaluation of the environmental performance of the building as an organism. The methodology is founded on a system of different values and weights attributed to the parameters of the families members which are adjusted and fine-tuned through a series of iterations, thus affecting the overall building performance towards an optimum goal. The performance evaluation method used in the “families” methodology is not limited to the individual assessment of the environmental performance objectives or to an integrated multi-objective weighting mechanism; as an overall evaluation platform it checks and balances the individual characteristics of the system not as static conclusive results but as dynamic criteria intended to guide the overall design and building process. The importance of this paper lies in the construction of a concrete methodological set of tools for the assessment of the environmental performance of the building. It will lead the way in independent research in the field of architectural design and the development of ecological thinking and building in China.
keywords	BIM ‘families’; Multi-Objective Generic Algorithm; Environmental Performance Simulation; Multi-Objective Environmental Performance Optimization
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ascaad2014_001
id	ascaad2014_001
authors	Kolarevic, Branko
year	2014
title	Building Dynamics: Exploring Architecture of Change
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 15-26
summary	This paper surveys essential concepts and significant past and current projects that deal with interactive, responsive environments, i.e. buildings that can change their configuration, appearance, and environmental conditions in response to patterns of occupation and context (and in return can shape those too). It discusses what may seem to be rather obvious: responsive, adaptive, flexible, etc., architectures are all about change, which in turn, is all about time. The principal argument is that change in architecture is far from being adequately addressed or explored theoretically, experimentally, or phenomenologically.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_023
id	ecaade2014_023
authors	Salma El Ahmar and Antonio Fioravanti
year	2014
title	Botanics and Parametric Design Fusions for Performative Building Skins - An application in hot climates
doi	https://doi.org/10.52842/conf.ecaade.2014.2.595
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 595-604
summary	Biomimicry and computational design are two growing fields of research and practice in architecture for their potential in performative and sustainable design, among many other benefits. Cooling loads are posing serious energy problems in hot climatic cities as in Cairo and Alexandria. Attempting to solve these problems, this research turned to botanical inspirations for ideas in order to improve thermoregulation of the building skin. One of these ideas was chosen and implemented using computational software in the design of a parametric vertical shading screen for a typical office room in Cairo. The challenge was to minimize cooling loads as much as possible without compromising daylight requirements. An evolutionary solver was used to optimize results and environmental simulations were performed before and after the proposed screen to assess its performance and evaluate this biomimetic-computational approach to design.
wos	WOS:000361385100062
keywords	Biomimicry; building skin; thermoregulation; parametric design; hot climates
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2014_000
id	ascaad2014_000
authors	Sidawi, Bhzad and Zaki Mallasi (eds.)
year	2014
title	Digital Crafting: Virtualizing Architecture and Delivering Real Built Environment
source	7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014) [ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, 470 p.
summary	In decades past, the architect was the master-builder with hands-on craftsman experience to design and direct the various trades in the construction of the building. The role of digital design, computation methodologies and processes are poised to transform how we think and craft architecture to deliver today's built environment. Digital crafting methods in today's thinking process for a designer/builder/manufacturer are affecting the delivery of buildings as a final product with aspiration to create rich sensory and habitable environments. ASCAAD 7th Conference theme explores the linkages among digital design process thinking, constructability, the digital manufacturing process and their impact on the practice of architecture, engineering and construction. ASCAAD society has invited academics, researchers and professionals to join and contribute to the debate on the use of Computer-Aided Architectural Design and Information Technology and how the use/ implementation would support and lead to innovative concepts, tools, systems and products on architectural, Urban/City/ regional planning, and building science levels.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2015_8.334
id	sigradi2015_8.334
authors	Silva, Lilian Maciel Furtado; Silva, Neander Furtado
year	2015
title	Digital Design of High-Rise Buildings with Tessellation and Mapping
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 414-419.
summary	A new high-rise building, when inserted in an existing urban environment, cannot have all the floor plans identical since the visual and environmental constraints change from floor to floor due to the interference of neighboring buildings, sun light, prevailing wind and noise. So how can we design a building that takes into consideration all this variables? How can digital design tools help? (DELPINO, 2014). We believe that a building like that can be designed constructing facade maps which allow a floor by floor analysis considering visual, wind, noise and sun light constraints. We believe that facade maps analysis and their superposition provide clues of how each floor plan can be built to provide comfort and to take most advantage of the view. (DELPINO, 2014). We believe that variation techniques such as tessellation and morphing can provide the formal bases for such design. We believe that digital design tools are vital both for analysis as well as for designing this type of building. (IWAMOTO, 2009, p. 35-59; MOUSSAVI, 2009, p. 42-216).
keywords	High-rise Buildings, Digital Design Method, Tessellation, Mapping
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2014_046
id	ecaade2014_046
authors	Yazg_ Aksoy and Gülen Cagdas
year	2014
title	A Model for Sustainable Site Layout Design with Pareto Genetic Algorithm: SSPM
doi	https://doi.org/10.52842/conf.ecaade.2014.1.227
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 227-238
summary	In architectural design, computer aided design tools have an important impact on design process, but still early design stage and sustainable design are problematic issues. During sustainable architectural design process, the designer needs to comply with some regulations, which requires calculations and comparisons. Green building certification systems are developed to assist designers during this complicated process, but for an efficient sustainable design for different regions, environmental information and local building codes must be considered with green building certification system criteria. In this paper, LEED and BREEAM certification systems are going to be considered as being the most representative building environment assessment schemes that are in use. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local building codes and environmental conditions; an efficient decision support system can be developed by using multi-objective genetic algorithm. This paper presents an effective site-use multi-objective optimization model that use pareto genetic algorithm to determine the most efficient sustainable site layout design for social housing, which could assist designers in the early stage of design process.
wos	WOS:000361384700022
keywords	Sustainable site layout design; multi objective genetic algorithm; leed-breeam
series	eCAADe
email
last changed	2022/06/07 07:57

For more results click below: