Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 536

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_120
id	caadria2014_120
authors	Hack, Norman; Willi Viktor Lauer, Fabio Gramazio and Matthias Kohler
year	2014
title	Mesh Mould: Differentiation for Enhanced Performance
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 139–148
doi	https://doi.org/10.52842/conf.caadria.2014.139
summary	Mesh-Mould is a novel robotic fabrication system for complex, non-standard concrete structures. The system folds together formwork and reinforcement, the two most labour intensive aspects of concrete constructions and offers an alternative approach to the current modes of prefabrication by suggesting an in-situ fabrication process (Figure 1). The paper outlines the development of the Form-work/Reinforcing Meshes through several iterations of physical and digital tests. Initially starting from simple triangulated 3D lattices, the structures evolved to become more complex and differentiated. The incorporating of flow enhancing ducts and surface perimeters with diverse surface aperture densities facilitates an optimal concrete flow and material distribution within the mesh.
keywords	Robotic fabrication; concrete formwork; differentiation; spatial extrusion
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac201412105
id	ijac201412105
authors	Choo, Thian-Siong; Patrick Janssen
year	2014
title	Evolutionary Optimisation of Semitransparent Building Integrated Photovoltaic Facades
source	International Journal of Architectural Computing vol. 12 - no. 1, 81-100
summary	The optimisation of semi-transparent building integrated photovoltaic facades can be challenging when attempting to find an overall balance performance between conflicting performance criteria. This paper presents a three-phase design optimisation method that maximises overall electricity savings generated by these types of facades by simulating the combined impact of electricity generation, cooling load, and daylight autonomy. Two demonstrations are performed, with the difference being that the second demonstration uses an enhanced model for calculating daylight savings that takes into account the use of blinds to counteract glare. For both demonstrations, the three-phase optimisation method significantly reduces optimisation run times. Comparing the design variants evolved by the two demonstrations, the use of the enhanced daylight savings model results in a total electricity savings that is more accurate but in terms of visual differentiation, the difference between the optimized design variants is relatively small.
series	journal
last changed	2019/05/24 09:55

_id	caadria2014_044
id	caadria2014_044
authors	Huang, Alvin; Stephen Lewis and Jason Gillette
year	2014
title	Pure Tension: Intuition, Engineering & Fabrication
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 171–180
doi	https://doi.org/10.52842/conf.caadria.2014.171
summary	The "PURE Tension" Pavilion is a lightweight, rapidly deployable, tensioned membrane structure and portable charging station commissioned by Volvo Car Italia to showcase the new Volvo V60 Hybrid Electric Diesel car. Officially launched in Milan, Italy in October 2013, this experimental structure was developed through a process of rigorous research and development that investigated methods of associative modelling, dynamic mesh relaxation, geometric rationalization, solar incidence analysis, membrane panelling, and material performance. It is an experimental structure that, similar to a concept car, is a working prototype that speculates on the potential future of personal mobility and alternative energy sources for transportation while also exploring digital design methodologies and innovative structural solutions. This paper will illustrate the design, development and fabrication processes involved in realizing this structure.
keywords	Form-finding; dynamic-mesh relaxation; geometric rationalisation; patterning, digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2024_167
id	ecaade2024_167
authors	Alammar, Ammar; Alymani, Abdulrahman; Jabi, Wassim
year	2024
title	Building Energy Efficiency Estimations with Random Forest for Single and Multi-Zones
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 365–374
doi	https://doi.org/10.52842/conf.ecaade.2024.2.365
summary	Surrogate models (SM) present an opportunity for rapid assessment of a building's performance, surpassing the pace of simulation-based methods. Setting up a simulation for a single concept involves defining numerous parameters, disrupting the architect's creative flow due to extended simulation run times. Therefore, this research explores integrating building energy analysis with advanced machine learning techniques to predict heating and cooling loads (KWh/m2) for single and multi-zones in buildings. To generate the dataset, the study adopts a parametric generative workflow, building upon Chou and Bui's (2014) methodology. This dataset encompasses multiple building forms, each with unique topological connections and attributes, ensuring a thorough analysis across varied building scenarios. These scenarios undergo thermal simulation to generate data for machine learning analysis. The study primarily utilizes Random Forest (RF) as a new technique to estimate the heating and cooling loads in buildings, a critical factor in building energy efficiency. Following that, A random search approach is utilized to optimize the hyperparameters, enhancing the robustness and accuracy of the machine learning models employed later in the research. The RF algorithms demonstrate high performance in predicting heating and cooling loads (KWh/m2), contributing to enhanced building energy efficiency. The study underscores the potential of machine learning in optimizing building designs for energy efficiency.
keywords	Heating and Cooling loads, Topology, Machine learning, Random Forest
series	eCAADe
email
last changed	2024/11/17 22:05

_id	acadia14projects_87
id	acadia14projects_87
authors	Ahrens, Chandler; Sprecher, Aaron; Neuman, Eran
year	2014
title	WHITEOUT: Topological evolution of embedded geometries
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 87-90
doi	https://doi.org/10.52842/conf.acadia.2014.087
summary	Whiteout documents the design, fabrication and installation of a full scale prototype using a predictive mesh relaxation algorithm while the physical construct made from white spandex fabric, steel tube, wood members and aluminum connectors verifies the virtual assumptions.
keywords	Material Logics and Tectonics
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:54

_id	acadia14_589
id	acadia14_589
authors	Becker, Mirco
year	2014
title	Configurations of Intensity
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 589-596
doi	https://doi.org/10.52842/conf.acadia.2014.589
summary	The author is proposing a framework for discussing aesthetics in computational practice. The framework is established based on the analysis and comparison of 8 digitally crafted sculptures - Digital Bodies by Architecture and Performative Design (APD) at Städelschule Architecture Class (SAC)
keywords	3d scanning, digital aesthetic, mesh curvature, design computation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia14_209
id	acadia14_209
authors	Huang, Alvin; Lewis, Stephen
year	2014
title	Nearly Minimal: How intuition and analysis inform the minimal surface geometries in the Pure Tension Pavilion
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 209-218
doi	https://doi.org/10.52842/conf.acadia.2014.209
summary	This paper focuses on the application of tool, exploration of technique, and subsequent development of an informed design intuition for generating "near" minimal surface structures in the design, development and construction of the Pure Tension Pavilion.
keywords	Form-finding, Mesh Relaxation, Kangaroo, Intuition, structural analysis
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:50

_id	acadia14_135
id	acadia14_135
authors	Jahn, Gwyllim; Morgan, Thomas; Roudavski, Stanlislav
year	2014
title	Mesh Agency
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 135-144
doi	https://doi.org/10.52842/conf.acadia.2014.135
summary	The paper argues that artifacts of meshes derived from generative processes can prompt designers to seed, analyze, and interact with phenomena otherwise withdrawn from habitual human perception.
keywords	digital materiality, modelling and simulation, speculative design, computational creativity, emergence and self-organization, non-human agency
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2014_184
id	caadria2014_184
authors	Janssen, Patrick and Vignesh Kaushik
year	2014
title	Plot Packing
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 533–542
doi	https://doi.org/10.52842/conf.caadria.2014.533
summary	Generative design tools can accelerate the optioneering process by allowing designers to quickly generate large numbers of design variants, thereby enabling a wider and more thorough exploration to be conducted. This paper focuses on procedures for generating inner city street networks and city block massing studies for sites within existing urban areas. A novel procedure is proposed that is capable of subdividing complex non-orthogonal sites into similarly sized well-formed plots and subsequently further subdividing these plots into sizes appropriate for selected city block typologies. The application of the procedure is demonstrated on a site in Singapore.
keywords	Urban optioneering; street networks; parametric urbanism; quadrilateral mesh generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2014_060
id	ecaade2014_060
authors	Koki Akiyoshi and Hiroya Tanaka
year	2014
title	Local-reconfigurable Freeform surface with plywood - From the perspective of Japanese Tsugite-Shiguchi
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 527-535
doi	https://doi.org/10.52842/conf.ecaade.2014.1.527
wos	WOS:000361384700052
summary	This research exhibits a novel construction method for Freeform surfaces with plywood, without using metal joints and bending. By introducing the perspective of Japanese Tsugite-Shiguchi, the research aims for a drastic change from node-oriented thinking to module-oriented thinking. This paper focuses on the investigation of how to simplify fabrication processes, how to realize the environmental capabilities of Freeform wood structures, and how to provide redundancy and stability to the whole architectural system. In order to challenge these problems, we examined three discretion methods. As a result, we have been successful to produce a double-layered surface, filled with triangular mesh, implemented only by cutting one sheet of plywood. Moreover, the system has also acquired a new nature: local-reconfigurability, wherein it can react and adapt to fit local parameters and requirements.
keywords	Digital fabrication; freeform timber; without metal and bending; discrete surface; minimal components for mega-assembly
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2014_149
id	ecaade2014_149
authors	Matthias Standfest
year	2014
title	Unsupervised Symmetric Polygon Mesh Mapping - The Dualism of Mesh Representation and Its Implementation for Many Layered Self-Organizing Map Architectures
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2014.1.505
wos	WOS:000361384700050
summary	With this paper we present a fully automated semantic shape similarity detection based on N-rings with further potential for shape synthesis in a topological correct feature space. Therefore a way of symmetric encoding of geometry, optimized for the use as feature-vector in self-organizing maps, is introduced. Furthermore we present a modified kernel for the detection of the best matching unit in self-organizing maps especially designed for a data topology differing from the default predecessor/successor structure. Finally we provide the results of a conducted experiment clustering building blocks of an area in Zürich, Switzerland.
keywords	Unsupervised machine learning; geometry clustering; self-organizing map; mesh synthesis; probabilistic modelling
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2014_066
id	ecaade2014_066
authors	Timo Harboe Nielsen, Stephen Melville and Iain Sproat
year	2014
title	Populating surfaces with holes using particle repulsion based on scalar fields
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 537-545
doi	https://doi.org/10.52842/conf.ecaade.2014.1.537
wos	WOS:000361384700053
summary	This paper describes the relaxation of charged particles in order to create a pattern of voids based on a scalar field on any complex polygon mesh. A scalar field representing stress values or a greyscale image, can be used to create void patterns of aesthetic or structural character; all with full awareness of the materiality. Following relaxation, areas with low scalar values consist of large voids with a small distance between them. Areas of high scalar value consist of small voids with a greater distance between them. This research has been applied in the design of a sculpture at Oxford Brookes University, where stress data from Finite Element Software has been used for the automatic and rational distribution of holes.
keywords	Surface perforation; geometry optimisation; particle repulsion
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2014_167
id	ecaade2014_167
authors	Pavlos Fereos and Marios Tsiliakos
year	2014
title	Isoprototyping - Rapid Robotic Aided Fabrication for Double Curvature Surfaces
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 433-443
doi	https://doi.org/10.52842/conf.ecaade.2014.1.433
wos	WOS:000361384700043
summary	IsoPrototyping is a research initiative, undertaken at the Institute fur experimentelle architektur.hochbau, within the context of the Vertiefung Hochbau and Sonderkapitel des hochbaus courses, which specialize on building construction. Through the case study of an iso-surface spatial configuration, this research targets the exploration of innovative digital prototyping methodologies, that would allow rapid and cost-efficient fabrication, capable of manufacturing any given double curved surface. The ABB industrial robots of REX-Lab programmed in combination with custom designed, recalibrated dry-mold, surface-producing apparatus, formed the framework for a proficient, yet flexible, process describing and fabricating implicit non-linear systems.
keywords	Industrial robots; pin-board; rapid-prototyping; dry-recalibrated mould; digital-fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia14_267
id	acadia14_267
authors	Ahlquist, Sean
year	2014
title	Post-forming Composite Morphologies: Materialization and design methods for inducing form through textile material behavior
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 267-276
doi	https://doi.org/10.52842/conf.acadia.2014.267
summary	This paper presents research in developing materials with integrated pre-stressed textile and rigid composite properties. Such a material system, termed Pre-stressed Textile-Reinforced Composites (pTRC), produces forms with great degrees of both 3-dimensional and structural differentiation, from flat form-work in combination with a curated composite forming process.
keywords	Pre-stressed Textile-reinforced Composites, Textile Hybrid, Material Behavior, Form-finding, Spring-based Simulation.Category: Material Logics and Tectonics.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	caadria2014_047
id	caadria2014_047
authors	Dickinson, Susannah and Sheehan Wachter
year	2014
title	Nature as a Comprehensive Model: A Biomimetic Installation
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 627–636
doi	https://doi.org/10.52842/conf.caadria.2014.627
summary	The following group installation was part of a seminar on biomimetics at the University of Arizona, USA. The design began with research into various natural systems, namely cell growth and morphogenesis and digital tools. In nature cells contain preprogrammed responses based on intrinsic properties which allow for differentiation and adaptation to external forces. This logic of cell morphology was developed into the installation design. Form specificity and topological variation was developed through the manipulation of a material system, bending and loading identical components to adapt to external forces, such as the sun, while simultaneously navigating the site, providing structure and ultimately architectural space.
keywords	Biomimetics; pedagogy; simulation; design/build
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia14projects_185
id	acadia14projects_185
authors	Hell, Ula; Kehne, Holger; Pichler, Peter
year	2014
title	Lamellar Flows: Digitally Conceived Building Skins
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 185-188
doi	https://doi.org/10.52842/conf.acadia.2014.185
summary	Digital design strategies usually create differentiation and formal complexities in relatively defined and encapsulated settings. This project focuses less on form itself but on the processes of convergence between site, material, structure, function and construction to be forged and calibrated as one specific material system.
keywords	parallel, convergence, lamellar, material system, morphology, timber
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:49

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
wos	WOS:000372316000007
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	ecaade2014_086
id	ecaade2014_086
authors	Ahmed Sarhan and Peter Rutherford
year	2014
title	Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
doi	https://doi.org/10.52842/conf.ecaade.2014.1.323
wos	WOS:000361384700032
summary	The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
keywords	Environmental design; building performance simulation; architectural design education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: